Hi All,

I want to test Ethernet loop back mode on the Xilinx Zc702 evaluation mode from u-boot. I search the u-boot for setting the control register to loopback mode but could not find one. Please let me know if any of you have tested the same and any pointers to do the same. Thanks in advance.

Regards, Subash

::DISCLAIMER:: ----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------