Hi Simon, Hi Bin Meng,
I'm involved to build coreboot for a custom denverton platform, using u-boot as payload. I've seen your comment on u-boot forum:
https://lists.denx.de/pipermail/u-boot/2016-September/268191.html
and I contact you to have some tips. I've noticed that coreboot 4.7 extends its support to denverton platforms too so I decided to use it and I'm studying FSP binary blob in order to apply it correctly to my coreboot.rom.
At this moment I got two main questions. How to setup my spd memory down parameters? May I use u-boot-2010.06 as coreboot payload?
Many thanks in advance. Best regards,
Francesco Lucconi
-- Sent from: http://u-boot.10912.n7.nabble.com/
Hi Francesco,
On Thu, Apr 19, 2018 at 12:11 AM, Francesco Lucconi luccons@gmail.com wrote:
Hi Simon, Hi Bin Meng,
I'm involved to build coreboot for a custom denverton platform, using u-boot as payload. I've seen your comment on u-boot forum:
https://lists.denx.de/pipermail/u-boot/2016-September/268191.html
and I contact you to have some tips. I've noticed that coreboot 4.7 extends its support to denverton platforms too so I decided to use it and I'm studying FSP binary blob in order to apply it correctly to my coreboot.rom.
At this moment I got two main questions. How to setup my spd memory down parameters?
If you are running U-Boot as the coreboot payload, there is no need for you to setup anything that is doing such low-level stuff programming like memory initialization. Coreboot does this for you.
May I use u-boot-2010.06 as coreboot payload?
Please build the coreboot payload from the latest U-Boot source. 2010.06 is far too old.
Regards, Bin
participants (2)
-
Bin Meng -
Francesco Lucconi