Clean up CamelCase in DDR code to comply with latest coding style.

Signed-off-by: York Sun yorksun@freescale.com --- .../powerpc/cpu/mpc8xxx/ddr/common_timing_params.h | 8 ++-- arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 46 ++++++++++---------- arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 2 +- arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 46 ++++++++++---------- .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 14 +++--- arch/powerpc/cpu/mpc8xxx/ddr/main.c | 6 +-- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 34 +++++++-------- arch/powerpc/include/asm/fsl_ddr_sdram.h | 28 ++++++------ board/exmeritus/hww1u1a/ddr.c | 2 +- board/freescale/b4860qds/ddr.c | 4 +- board/freescale/corenet_ds/ddr.c | 4 +- board/freescale/mpc8349emds/ddr.c | 6 +-- board/freescale/mpc8540ads/ddr.c | 2 +- board/freescale/mpc8544ds/ddr.c | 2 +- board/freescale/mpc8560ads/ddr.c | 2 +- board/freescale/mpc8572ds/ddr.c | 4 +- board/freescale/mpc8610hpcd/ddr.c | 2 +- board/freescale/mpc8641hpcn/ddr.c | 2 +- board/freescale/p1022ds/ddr.c | 4 +- board/freescale/p2020ds/ddr.c | 4 +- board/freescale/p2041rdb/ddr.c | 4 +- board/freescale/t4qds/ddr.c | 4 +- board/stx/stxgp3/ddr.c | 2 +- board/stx/stxssa/ddr.c | 2 +- board/xes/xpedite550x/ddr.c | 2 +- doc/README.fsl-ddr | 2 +- 26 files changed, 119 insertions(+), 119 deletions(-)

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h b/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h index 06706ed..b392cd1 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h @@ -41,10 +41,10 @@ typedef struct { unsigned int lowest_common_SPD_caslat; unsigned int highest_common_derated_caslat; unsigned int additive_latency; - unsigned int all_DIMMs_burst_lengths_bitmask; - unsigned int all_DIMMs_registered; - unsigned int all_DIMMs_unbuffered; - unsigned int all_DIMMs_ECC_capable; + unsigned int all_dimms_burst_lengths_bitmask; + unsigned int all_dimms_registered; + unsigned int all_dimms_unbuffered; + unsigned int all_dimms_ecc_capable;

unsigned long long total_mem; unsigned long long base_address; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 242eb47..6c5dcb4 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -360,7 +360,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4; /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ ext_wrrec = (picos_to_mclk(common_dimm->tWR_ps) + - (popts->OTF_burst_chop_en ? 2 : 0)) >> 4; + (popts->otf_burst_chop_en ? 2 : 0)) >> 4;

ddr->timing_cfg_3 = (0 | ((ext_pretoact & 0x1) << 28) @@ -440,7 +440,7 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, printf("Error: WRREC doesn't support more than 16 clocks\n"); else wrrec_mclk = wrrec_table[wrrec_mclk - 1]; - if (popts->OTF_burst_chop_en) + if (popts->otf_burst_chop_en) wrrec_mclk += 2;

acttoact_mclk = picos_to_mclk(common_dimm->tRRD_ps); @@ -462,7 +462,7 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, if (wrtord_mclk < 4) wrtord_mclk = 4; #endif - if (popts->OTF_burst_chop_en) + if (popts->otf_burst_chop_en) wrtord_mclk += 2;

ddr->timing_cfg_1 = (0 @@ -531,12 +531,12 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, #endif if (additive_latency) rd_to_pre += additive_latency; - if (popts->OTF_burst_chop_en) + if (popts->otf_burst_chop_en) rd_to_pre += 2; /* according to UM */

wr_data_delay = popts->write_data_delay; - cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps); - four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps); + cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps); + four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps);

ddr->timing_cfg_2 = (0 | ((add_lat_mclk & 0xf) << 28) @@ -555,8 +555,8 @@ static void set_ddr_sdram_rcw(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm) { - if (common_dimm->all_DIMMs_registered - && !common_dimm->all_DIMMs_unbuffered) { + if (common_dimm->all_dimms_registered && + !common_dimm->all_dimms_unbuffered) { if (popts->rcw_override) { ddr->ddr_sdram_rcw_1 = popts->rcw_1; ddr->ddr_sdram_rcw_2 = popts->rcw_2; @@ -599,8 +599,8 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, unsigned int dbw; /* DRAM dta bus width */ unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */ unsigned int ncap = 0; /* Non-concurrent auto-precharge */ - unsigned int threeT_en; /* Enable 3T timing */ - unsigned int twoT_en; /* Enable 2T timing */ + unsigned int three_t_en; /* Enable 3T timing */ + unsigned int two_t_en; /* Enable 2T timing */ unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */ unsigned int x32_en = 0; /* x32 enable */ unsigned int pchb8 = 0; /* precharge bit 8 enable */ @@ -610,20 +610,20 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,

mem_en = 1; sren = popts->self_refresh_in_sleep; - if (common_dimm->all_DIMMs_ECC_capable) { + if (common_dimm->all_dimms_ecc_capable) { /* Allow setting of ECC only if all DIMMs are ECC. */ - ecc_en = popts->ECC_mode; + ecc_en = popts->ecc_mode; } else { ecc_en = 0; }

- if (common_dimm->all_DIMMs_registered - && !common_dimm->all_DIMMs_unbuffered) { + if (common_dimm->all_dimms_registered && + !common_dimm->all_dimms_unbuffered) { rd_en = 1; - twoT_en = 0; + two_t_en = 0; } else { rd_en = 0; - twoT_en = popts->twoT_en; + two_t_en = popts->two_t_en; }

sdram_type = CONFIG_FSL_SDRAM_TYPE; @@ -643,7 +643,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, eight_be = 1; }

- threeT_en = popts->threeT_en; + three_t_en = popts->three_t_en; ba_intlv_ctl = popts->ba_intlv_ctl; hse = popts->half_strength_driver_enable;

@@ -657,8 +657,8 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, | ((dbw & 0x3) << 19) | ((eight_be & 0x1) << 18) | ((ncap & 0x1) << 17) - | ((threeT_en & 0x1) << 16) - | ((twoT_en & 0x1) << 15) + | ((three_t_en & 0x1) << 16) + | ((two_t_en & 0x1) << 15) | ((ba_intlv_ctl & 0x7F) << 8) | ((x32_en & 0x1) << 5) | ((pchb8 & 0x1) << 4) @@ -691,7 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, int i;

dll_rst_dis = 1; /* Make this configurable */ - dqs_cfg = popts->DQS_config; + dqs_cfg = popts->qds_config; for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->cs_local_opts[i].odt_rd_cfg || popts->cs_local_opts[i].odt_wr_cfg) { @@ -710,7 +710,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, * << DDR_SDRAM_INTERVAL[REFINT] */ #if defined(CONFIG_FSL_DDR3) - obc_cfg = popts->OTF_burst_chop_en; + obc_cfg = popts->otf_burst_chop_en; #else obc_cfg = 0; #endif @@ -730,7 +730,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,

#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Use the DDR controller to auto initialize memory. */ - d_init = popts->ECC_init_using_memctl; + d_init = popts->ecc_init_using_memctl; ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE; debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init); #else @@ -1101,7 +1101,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #if defined(CONFIG_FSL_DDR2) const unsigned int mclk_ps = get_memory_clk_period_ps(); #endif - dqs_en = !popts->DQS_config; + dqs_en = !popts->qds_config; rtt = fsl_ddr_get_rtt();

al = additive_latency; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index c173a5a..e3b414e 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -72,7 +72,7 @@ unsigned int compute_lowest_common_dimm_parameters( const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms); -unsigned int populate_memctl_options(int all_DIMMs_registered, +unsigned int populate_memctl_options(int all_dimms_registered, memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index 260fce5..7484d09 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -173,10 +173,10 @@ static void lowest_common_dimm_parameters_edit(fsl_ddr_info_t *pinfo, COMMON_TIMING(lowest_common_SPD_caslat), COMMON_TIMING(highest_common_derated_caslat), COMMON_TIMING(additive_latency), - COMMON_TIMING(all_DIMMs_burst_lengths_bitmask), - COMMON_TIMING(all_DIMMs_registered), - COMMON_TIMING(all_DIMMs_unbuffered), - COMMON_TIMING(all_DIMMs_ECC_capable), + COMMON_TIMING(all_dimms_burst_lengths_bitmask), + COMMON_TIMING(all_dimms_registered), + COMMON_TIMING(all_dimms_unbuffered), + COMMON_TIMING(all_dimms_ecc_capable), COMMON_TIMING(total_mem), COMMON_TIMING(base_address), }; @@ -345,9 +345,9 @@ static void print_lowest_common_dimm_parameters( COMMON_TIMING(highest_common_derated_caslat), COMMON_TIMING(additive_latency), COMMON_TIMING(ndimms_present), - COMMON_TIMING(all_DIMMs_registered), - COMMON_TIMING(all_DIMMs_unbuffered), - COMMON_TIMING(all_DIMMs_ECC_capable), + COMMON_TIMING(all_dimms_registered), + COMMON_TIMING(all_dimms_unbuffered), + COMMON_TIMING(all_dimms_ecc_capable), }; static const unsigned int n_opts = ARRAY_SIZE(options);

@@ -358,8 +358,8 @@ static void print_lowest_common_dimm_parameters( printf("tCKmax_ps = %u (%u MHz)\n", plcd_dimm_params->tCKmax_ps, picos_to_mhz(plcd_dimm_params->tCKmax_ps)); - printf("all_DIMMs_burst_lengths_bitmask = %02X\n", - plcd_dimm_params->all_DIMMs_burst_lengths_bitmask); + printf("all_dimms_burst_lengths_bitmask = %02X\n", + plcd_dimm_params->all_dimms_burst_lengths_bitmask);

print_option_table(options, n_opts, plcd_dimm_params);

@@ -421,9 +421,9 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(memctl_interleaving), CTRL_OPTIONS(memctl_interleaving_mode), CTRL_OPTIONS(ba_intlv_ctl), - CTRL_OPTIONS(ECC_mode), - CTRL_OPTIONS(ECC_init_using_memctl), - CTRL_OPTIONS(DQS_config), + CTRL_OPTIONS(ecc_mode), + CTRL_OPTIONS(ecc_init_using_memctl), + CTRL_OPTIONS(qds_config), CTRL_OPTIONS(self_refresh_in_sleep), CTRL_OPTIONS(dynamic_power), CTRL_OPTIONS(data_bus_width), @@ -442,8 +442,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, * These can probably be changed to 2T_EN and 3T_EN * (using a leading numerical character) without problem */ - CTRL_OPTIONS(twoT_en), - CTRL_OPTIONS(threeT_en), + CTRL_OPTIONS(two_t_en), + CTRL_OPTIONS(three_t_en), CTRL_OPTIONS(ap_en), CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), @@ -455,8 +455,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(rcw_2), CTRL_OPTIONS(ddr_cdr1), CTRL_OPTIONS(ddr_cdr2), - CTRL_OPTIONS(tCKE_clock_pulse_width_ps), - CTRL_OPTIONS(tFAW_window_four_activates_ps), + CTRL_OPTIONS(tcke_clock_pulse_width_ps), + CTRL_OPTIONS(tfaw_window_four_activates_ps), CTRL_OPTIONS(trwt_override), CTRL_OPTIONS(trwt), }; @@ -666,9 +666,9 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(memctl_interleaving), CTRL_OPTIONS(memctl_interleaving_mode), CTRL_OPTIONS_HEX(ba_intlv_ctl), - CTRL_OPTIONS(ECC_mode), - CTRL_OPTIONS(ECC_init_using_memctl), - CTRL_OPTIONS(DQS_config), + CTRL_OPTIONS(ecc_mode), + CTRL_OPTIONS(ecc_init_using_memctl), + CTRL_OPTIONS(qds_config), CTRL_OPTIONS(self_refresh_in_sleep), CTRL_OPTIONS(dynamic_power), CTRL_OPTIONS(data_bus_width), @@ -686,8 +686,8 @@ static void print_memctl_options(const memctl_options_t *popts) * These can probably be changed to 2T_EN and 3T_EN * (using a leading numerical character) without problem */ - CTRL_OPTIONS(twoT_en), - CTRL_OPTIONS(threeT_en), + CTRL_OPTIONS(two_t_en), + CTRL_OPTIONS(three_t_en), CTRL_OPTIONS(registered_dimm_en), CTRL_OPTIONS(ap_en), CTRL_OPTIONS(x4_en), @@ -700,8 +700,8 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(rcw_2), CTRL_OPTIONS_HEX(ddr_cdr1), CTRL_OPTIONS_HEX(ddr_cdr2), - CTRL_OPTIONS(tCKE_clock_pulse_width_ps), - CTRL_OPTIONS(tFAW_window_four_activates_ps), + CTRL_OPTIONS(tcke_clock_pulse_width_ps), + CTRL_OPTIONS(tfaw_window_four_activates_ps), CTRL_OPTIONS(trwt_override), CTRL_OPTIONS(trwt), }; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 56128a7..098619f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -210,7 +210,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1 &= dimm_params[i].burst_lengths_bitmask; } } - outpdimm->all_DIMMs_burst_lengths_bitmask = temp1; + outpdimm->all_dimms_burst_lengths_bitmask = temp1;

/* Determine if all DIMMs registered buffered. */ temp1 = temp2 = 0; @@ -232,19 +232,19 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } }

- outpdimm->all_DIMMs_registered = 0; - outpdimm->all_DIMMs_unbuffered = 0; + outpdimm->all_dimms_registered = 0; + outpdimm->all_dimms_unbuffered = 0; if (temp1 && !temp2) { - outpdimm->all_DIMMs_registered = 1; + outpdimm->all_dimms_registered = 1; } else if (!temp1 && temp2) { - outpdimm->all_DIMMs_unbuffered = 1; + outpdimm->all_dimms_unbuffered = 1; } else { printf("ERROR: Mix of registered buffered and unbuffered " "DIMMs detected!\n"); }

temp1 = 0; - if (outpdimm->all_DIMMs_registered) + if (outpdimm->all_dimms_registered) for (j = 0; j < 16; j++) { outpdimm->rcw[j] = dimm_params[0].rcw[j]; for (i = 1; i < number_of_dimms; i++) { @@ -397,7 +397,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } else { debug("Warning: not all DIMMs ECC capable, cant enable ECC\n"); } - outpdimm->all_DIMMs_ECC_capable = temp1; + outpdimm->all_dimms_ecc_capable = temp1;

#ifndef CONFIG_FSL_DDR3 /* FIXME: move to somewhere else to validate. */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 842bf19..b9ae950 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -457,7 +457,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, * which is currently STEP_ASSIGN_ADDRESSES. */ populate_memctl_options( - timing_params[i].all_DIMMs_registered, + timing_params[i].all_dimms_registered, &pinfo->memctl_opts[i], pinfo->dimm_params[i], i); /* @@ -466,7 +466,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, * using fixed parameters, this function should be * be called from board init file. */ - if (timing_params[i].all_DIMMs_registered) + if (timing_params[i].all_dimms_registered) assert_reset = 1; } if (assert_reset) { @@ -589,7 +589,7 @@ phys_size_t fsl_ddr_sdram(void) */ deassert_reset = board_need_mem_reset(); for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { - if (info.common_timing_params[i].all_DIMMs_registered) + if (info.common_timing_params[i].all_dimms_registered) deassert_reset = 1; } for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 30cdca4..67bc43b 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -499,7 +499,7 @@ static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm) return 0; }

-unsigned int populate_memctl_options(int all_DIMMs_registered, +unsigned int populate_memctl_options(int all_dimms_registered, memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) @@ -635,20 +635,20 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, popts->ba_intlv_ctl = 0;

/* Memory Organization Parameters */ - popts->registered_dimm_en = all_DIMMs_registered; + popts->registered_dimm_en = all_dimms_registered;

/* Operational Mode Paramters */

/* Pick ECC modes */ - popts->ECC_mode = 0; /* 0 = disabled, 1 = enabled */ + popts->ecc_mode = 0; /* 0 = disabled, 1 = enabled */ #ifdef CONFIG_DDR_ECC if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) { if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf)) - popts->ECC_mode = 1; + popts->ecc_mode = 1; } else - popts->ECC_mode = 1; + popts->ecc_mode = 1; #endif - popts->ECC_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */ + popts->ecc_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */

/* * Choose DQS config @@ -656,9 +656,9 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * 1 for DDR2 */ #if defined(CONFIG_FSL_DDR1) - popts->DQS_config = 0; + popts->qds_config = 0; #elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) - popts->DQS_config = 1; + popts->qds_config = 1; #endif

/* Choose self-refresh during sleep. */ @@ -705,15 +705,15 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, /* Choose burst length. */ #if defined(CONFIG_FSL_DDR3) #if defined(CONFIG_E500MC) - popts->OTF_burst_chop_en = 0; /* on-the-fly burst chop disable */ + popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */ #else if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) { /* 32-bit or 16-bit bus */ - popts->OTF_burst_chop_en = 0; + popts->otf_burst_chop_en = 0; popts->burst_length = DDR_BL8; } else { - popts->OTF_burst_chop_en = 1; /* on-the-fly burst chop */ + popts->otf_burst_chop_en = 1; /* on-the-fly burst chop */ popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */ } #endif @@ -756,8 +756,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * - number of components, number of active ranks * - how much time you want to spend playing around */ - popts->twoT_en = 0; - popts->threeT_en = 0; + popts->two_t_en = 0; + popts->three_t_en = 0;

/* for RDIMM, address parity enable */ popts->ap_en = 1; @@ -775,7 +775,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, popts->bstopre = 0x100;

/* Minimum CKE pulse width -- tCKE(MIN) */ - popts->tCKE_clock_pulse_width_ps + popts->tcke_clock_pulse_width_ps = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);

/* @@ -786,17 +786,17 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, * FIXME: width, was considering looking at pdimm->primary_sdram_width */ #if defined(CONFIG_FSL_DDR1) - popts->tFAW_window_four_activates_ps = mclk_to_picos(1); + popts->tfaw_window_four_activates_ps = mclk_to_picos(1);

#elif defined(CONFIG_FSL_DDR2) /* * x4/x8; some datasheets have 35000 * x16 wide columns only? Use 50000? */ - popts->tFAW_window_four_activates_ps = 37500; + popts->tfaw_window_four_activates_ps = 37500;

#elif defined(CONFIG_FSL_DDR3) - popts->tFAW_window_four_activates_ps = pdimm[0].tFAW_ps; + popts->tfaw_window_four_activates_ps = pdimm[0].tFAW_ps; #endif popts->zq_en = 0; popts->wrlvl_en = 0; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index f4eec82..29cf754 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -219,13 +219,13 @@ typedef struct fsl_ddr_cfg_regs_s { } fsl_ddr_cfg_regs_t;

typedef struct memctl_options_partial_s { - unsigned int all_DIMMs_ECC_capable; - unsigned int all_DIMMs_tCKmax_ps; - unsigned int all_DIMMs_burst_lengths_bitmask; - unsigned int all_DIMMs_registered; - unsigned int all_DIMMs_unbuffered; + unsigned int all_dimms_ecc_capable; + unsigned int all_dimms_tck_max_ps; + unsigned int all_dimms_burst_lengths_bitmask; + unsigned int all_dimms_registered; + unsigned int all_dimms_unbuffered; /* unsigned int lowest_common_SPD_caslat; */ - unsigned int all_DIMMs_minimum_tRCD_ps; + unsigned int all_dimms_minimum_trcd_ps; } memctl_options_partial_t;

#define DDR_DATA_BUS_WIDTH_64 0 @@ -261,10 +261,10 @@ typedef struct memctl_options_s { unsigned int addr_hash;

/* Operational mode parameters */ - unsigned int ECC_mode; /* Use ECC? */ + unsigned int ecc_mode; /* Use ECC? */ /* Initialize ECC using memory controller? */ - unsigned int ECC_init_using_memctl; - unsigned int DQS_config; /* Use DQS? maybe only with DDR2? */ + unsigned int ecc_init_using_memctl; + unsigned int qds_config; /* Use DQS? maybe only with DDR2? */ /* SREN - self-refresh during sleep */ unsigned int self_refresh_in_sleep; unsigned int dynamic_power; /* DYN_PWR */ @@ -272,7 +272,7 @@ typedef struct memctl_options_s { unsigned int data_bus_width; unsigned int burst_length; /* BL4, OTF and BL8 */ /* On-The-Fly Burst Chop enable */ - unsigned int OTF_burst_chop_en; + unsigned int otf_burst_chop_en; /* mirrior DIMMs for DDR3 */ unsigned int mirrored_dimm; unsigned int quad_rank_present; @@ -297,11 +297,11 @@ typedef struct memctl_options_s { unsigned int wrlvl_ctl_3;

unsigned int half_strength_driver_enable; - unsigned int twoT_en; - unsigned int threeT_en; + unsigned int two_t_en; + unsigned int three_t_en; unsigned int bstopre; - unsigned int tCKE_clock_pulse_width_ps; /* tCKE */ - unsigned int tFAW_window_four_activates_ps; /* tFAW -- FOUR_ACT */ + unsigned int tcke_clock_pulse_width_ps; /* tCKE */ + unsigned int tfaw_window_four_activates_ps; /* tFAW -- FOUR_ACT */

/* Rtt impedance */ unsigned int rtt_override; /* rtt_override enable */ diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c index 36d02ad..05b8a84 100644 --- a/board/exmeritus/hww1u1a/ddr.c +++ b/board/exmeritus/hww1u1a/ddr.c @@ -30,5 +30,5 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = 4; popts->cpo_override = 4; popts->write_data_delay = 2; - popts->twoT_en = 0; + popts->two_t_en = 0; } diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index b82b3d4..f77a4b8 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -129,7 +129,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->wrlvl_start = pbsp->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -146,7 +146,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; + popts->two_t_en = pbsp_highest->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 517e87f..ea393cd 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -217,7 +217,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, pbsp->write_data_delay; popts->clk_adjust = pbsp->clk_adjust; popts->wrlvl_start = pbsp->wrlvl_start; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -234,7 +234,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; + popts->two_t_en = pbsp_highest->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c index c66750e..85d216a 100644 --- a/board/freescale/mpc8349emds/ddr.c +++ b/board/freescale/mpc8349emds/ddr.c @@ -70,7 +70,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -86,7 +86,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = pbsp_highest->clk_adjust; popts->cpo_override = pbsp_highest->cpo; popts->write_data_delay = pbsp_highest->write_data_delay; - popts->twoT_en = pbsp_highest->force_2T; + popts->two_t_en = pbsp_highest->force_2T; } else { panic("DIMM is not supported by this board"); } @@ -97,5 +97,5 @@ found: * - number of DIMMs installed */ popts->half_strength_driver_enable = 0; - popts->DQS_config = 0; /* only true DQS signal is used on board */ + popts->qds_config = 0; /* only true DQS signal is used on board */ } diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 5711374..2240972 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -36,7 +36,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3;

/* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1;

/* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index 94219b9..c76733f 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -49,7 +49,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3;

/* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1;

/* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 5711374..2240972 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -36,7 +36,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3;

/* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1;

/* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index a7ff668..1784932 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -139,7 +139,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -155,7 +155,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = pbsp->clk_adjust; popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 94219b9..c76733f 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -49,7 +49,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3;

/* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1;

/* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 5d35757..b4ffef3 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -106,5 +106,5 @@ void fsl_ddr_board_options(memctl_options_t *popts,

found: /* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1; } diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c index a639861..9e9f404 100644 --- a/board/freescale/p1022ds/ddr.c +++ b/board/freescale/p1022ds/ddr.c @@ -72,7 +72,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -88,7 +88,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, popts->clk_adjust = pbsp->clk_adjust; popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c index 59034f9..51fd0b5 100644 --- a/board/freescale/p2020ds/ddr.c +++ b/board/freescale/p2020ds/ddr.c @@ -90,7 +90,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -106,7 +106,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = pbsp_highest->clk_adjust; popts->cpo_override = pbsp_highest->cpo; popts->write_data_delay = pbsp_highest->write_data_delay; - popts->twoT_en = pbsp_highest->force_2T; + popts->two_t_en = pbsp_highest->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c index 6d9a5de..4d3eb99 100644 --- a/board/freescale/p2041rdb/ddr.c +++ b/board/freescale/p2041rdb/ddr.c @@ -76,7 +76,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, pbsp->write_data_delay; popts->clk_adjust = pbsp->clk_adjust; popts->wrlvl_start = pbsp->wrlvl_start; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -93,7 +93,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; + popts->two_t_en = pbsp_highest->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 26ac2a5..6ee474c 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -56,7 +56,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->wrlvl_start = pbsp->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twoT_en = pbsp->force_2T; + popts->two_t_en = pbsp->force_2T; goto found; } pbsp_highest = pbsp; @@ -75,7 +75,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->wrlvl_start = pbsp_highest->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twoT_en = pbsp_highest->force_2T; + popts->two_t_en = pbsp_highest->force_2T; } else { panic("DIMM is not supported by this board"); } diff --git a/board/stx/stxgp3/ddr.c b/board/stx/stxgp3/ddr.c index 5711374..2240972 100644 --- a/board/stx/stxgp3/ddr.c +++ b/board/stx/stxgp3/ddr.c @@ -36,7 +36,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3;

/* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1;

/* * Factors to consider for half-strength driver enable: diff --git a/board/stx/stxssa/ddr.c b/board/stx/stxssa/ddr.c index 56c87b2..01f92f3 100644 --- a/board/stx/stxssa/ddr.c +++ b/board/stx/stxssa/ddr.c @@ -37,7 +37,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3;

/* 2T timing enable */ - popts->twoT_en = 1; + popts->two_t_en = 1;

/* * Factors to consider for half-strength driver enable: diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 993ae80..b2c461a 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -108,7 +108,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, ddr_freq <= pbsp->datarate_mhz_high) { popts->clk_adjust = pbsp->clk_adjust; popts->cpo_override = pbsp->cpo; - popts->twoT_en = 0; + popts->two_t_en = 0; break; } pbsp++; diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index 1243a12..9f903ca 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -391,7 +391,7 @@ Examples of debugging flow tRTP_ps = 7500 tDQSQ_max_ps = 0 tQHS_ps = 0 - FSL DDR>edit c0 opts ECC_mode 0 + FSL DDR>edit c0 opts ecc_mode 0 FSL DDR>edit c0 regs cs0_bnds 0x000000FF FSL DDR>go 2 GiB left unmapped