Change the I2C Slave Address of the PCA9450A:

0x35 --> 0x25

According to the NXP documentation, in the datasheet:

PCA9450DS.pdf (Rev 1.0 - 19 November 2019)

in the table 19 "PCA9450 I2C Slave Address) at page 27/96,

all the PCA9450 have the same I2C address. In particular, in case of 7-bit Slave Address, the address is 0x25.

This modification was tested on the imx8mm-evk, with the SOC equipped with the PCA9450A instead of the previous ROHM BD71847.

Signed-off-by: Flavio Suligoi f.suligoi@asem.it Reviewed-by: Peng Fan peng.fan@nxp.com --- Changes:

v1: add "Reviewed-by: Peng Fan peng.fan@nxp.com"

drivers/power/pmic/pca9450.c | 2 +- drivers/power/pmic/pmic_pca9450.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/pmic/pca9450.c b/drivers/power/pmic/pca9450.c index 0c9d9a366e..c7f8b80954 100644 --- a/drivers/power/pmic/pca9450.c +++ b/drivers/power/pmic/pca9450.c @@ -80,7 +80,7 @@ static struct dm_pmic_ops pca9450_ops = { };

static const struct udevice_id pca9450_ids[] = { - { .compatible = "nxp,pca9450a", .data = 0x35, }, + { .compatible = "nxp,pca9450a", .data = 0x25, }, { .compatible = "nxp,pca9450b", .data = 0x25, }, { } }; diff --git a/drivers/power/pmic/pmic_pca9450.c b/drivers/power/pmic/pmic_pca9450.c index 67a9090200..c0fb78c4cd 100644 --- a/drivers/power/pmic/pmic_pca9450.c +++ b/drivers/power/pmic/pmic_pca9450.c @@ -23,7 +23,7 @@ int power_pca9450a_init(unsigned char bus) p->name = pca9450_name; p->interface = PMIC_I2C; p->number_of_regs = PCA9450_REG_NUM; - p->hw.i2c.addr = 0x35; + p->hw.i2c.addr = 0x25; p->hw.i2c.tx_num = 1; p->bus = bus;