[U-Boot] [PATCH 1/4] mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS

newer
[U-Boot] [PATCH] wandboard: Remove...

older
[U-Boot] Uboot on qemu vexpress-a9...

Fabio Estevam

31 May 2017 31 May '17

6:16 p.m.

SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- configs/mx6sabresd_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 0e0edef..a1d0c84 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -9,7 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y

-- 2.7.4

Show replies by date

Fabio Estevam

31 May 31 May

6:16 p.m.

New subject: [U-Boot] [PATCH 2/4] mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS

SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- configs/mx6slevk_spl_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index 1fd86fc..ad15e7a 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -9,7 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y # CONFIG_CMD_BMODE is not set -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL,SYS_I2C" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SL,SYS_I2C" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y

-- 2.7.4

Fabio Estevam

6:16 p.m.

New subject: [U-Boot] [PATCH 3/4] cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS

SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- configs/cgtqmx6eval_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig index 77dd227..6b86afa 100644 --- a/configs/cgtqmx6eval_defconfig +++ b/configs/cgtqmx6eval_defconfig @@ -11,7 +11,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y

-- 2.7.4

Fabio Estevam

6:16 p.m.

New subject: [U-Boot] [PATCH 4/4] cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS

SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- configs/cm_fx6_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index fb2f9fa..d8d4401 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -12,7 +12,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y # CONFIG_CMD_BMODE is not set CONFIG_VIDEO=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80

-- 2.7.4

Stefano Babic

29 Jun 29 Jun

10:22 a.m.

New subject: [U-Boot] [PATCH 1/4] mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS

On 31/05/2017 18:16, Fabio Estevam wrote:

...

SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Fabio Estevam fabio.estevam@nxp.com

configs/mx6sabresd_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 0e0edef..a1d0c84 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -9,7 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y

Applied (whole series) to u-boot-imx, -next, thanks !

Best regards, Stefano Babic

-- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de =====================================================================

2869

Age (days ago)

2898

Last active (days ago)

List overview

Download

4 comments

2 participants

tags (0)

participants (2)

Fabio Estevam
Stefano Babic