[U-Boot] [PATCH 0/3] ARM: at91: add PLLB handle functions
To reduce the duplicated code, add PLLB enable/disable functions, replace the UTMI PLL handle code with these functions.
It is based on the following patch set. [PATCH 0/5] ARM: at91: improve peripheral and system clock handle functions [PATCH 0/4] ARM: at91: add UTMI PLL handle functions
Wenyou Yang (3): ARM: at91: clock: add PLLB enable/disable functions drivers: usb: ohci-at91: clean up the PLLB code board: atmel: siemens: clean up PLLB code
arch/arm/mach-at91/arm926ejs/clock.c | 38 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/include/mach/clk.h | 2 ++ board/siemens/smartweb/smartweb.c | 6 +----- board/siemens/taurus/taurus.c | 6 +----- drivers/usb/host/ohci-at91.c | 20 +++++------------ 5 files changed, 47 insertions(+), 25 deletions(-)
To avoid the duplicated code, add the PLLB handle functions.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
arch/arm/mach-at91/arm926ejs/clock.c | 38 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/include/mach/clk.h | 2 ++ 2 files changed, 40 insertions(+)
diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index c8b5e10..c8d24ae 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -18,6 +18,8 @@ # error You need to define CONFIG_AT91FAMILY in your board config! #endif
+#define EN_PLLB_TIMEOUT 500 + DECLARE_GLOBAL_DATA_PTR;
static unsigned long at91_css_to_rate(unsigned long css) @@ -242,3 +244,39 @@ void at91_mck_init(u32 mckr) while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) ; } + +int at91_pllb_clk_enable(u32 pllbr) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(pllbr, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) { + printf("ERROR: failed to enable PLLB\n"); + return -1; + } + } + + return 0; +} + +int at91_pllb_clk_disable(void) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(0, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) { + printf("ERROR: failed to disable PLLB\n"); + return -1; + } + } + + return 0; +} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index b2604ef..64dec52 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -133,5 +133,7 @@ void at91_system_clk_disable(int sys_clk); int at91_upll_clk_enable(void); int at91_upll_clk_disable(void); void at91_usb_clk_init(u32 value); +int at91_pllb_clk_enable(u32 pllbr); +int at91_pllb_clk_disable(void);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
Hello Wenyou,
Am 09.12.2015 um 05:29 schrieb Wenyou Yang:
To avoid the duplicated code, add the PLLB handle functions.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
arch/arm/mach-at91/arm926ejs/clock.c | 38 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/include/mach/clk.h | 2 ++ 2 files changed, 40 insertions(+)
Tested on the smartweb board, see log: http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/...
Tested-by: Heiko Schocher hs@denx.de
bye, Heiko
diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index c8b5e10..c8d24ae 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -18,6 +18,8 @@ # error You need to define CONFIG_AT91FAMILY in your board config! #endif
+#define EN_PLLB_TIMEOUT 500
DECLARE_GLOBAL_DATA_PTR;
static unsigned long at91_css_to_rate(unsigned long css)
@@ -242,3 +244,39 @@ void at91_mck_init(u32 mckr) while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) ; }
+int at91_pllb_clk_enable(u32 pllbr) +{
- struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- ulong start_time, tmp_time;
- start_time = get_timer(0);
- writel(pllbr, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) {
tmp_time = get_timer(0);if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {printf("ERROR: failed to enable PLLB\n");return -1;}- }
- return 0;
+}
+int at91_pllb_clk_disable(void) +{
- struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- ulong start_time, tmp_time;
- start_time = get_timer(0);
- writel(0, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) {
tmp_time = get_timer(0);if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {printf("ERROR: failed to disable PLLB\n");return -1;}- }
- return 0;
+} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index b2604ef..64dec52 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -133,5 +133,7 @@ void at91_system_clk_disable(int sys_clk); int at91_upll_clk_enable(void); int at91_upll_clk_disable(void); void at91_usb_clk_init(u32 value); +int at91_pllb_clk_enable(u32 pllbr); +int at91_pllb_clk_disable(void);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
Hi Heiko,
-----Original Message----- From: Heiko Schocher [mailto:hs@denx.de] Sent: 2015年12月10日 17:34 To: Yang, Wenyou Wenyou.Yang@atmel.com Cc: U-Boot Mailing List u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH 1/3] ARM: at91: clock: add PLLB enable/disable functions
Hello Wenyou,
Am 09.12.2015 um 05:29 schrieb Wenyou Yang:
To avoid the duplicated code, add the PLLB handle functions.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
arch/arm/mach-at91/arm926ejs/clock.c | 38
+++++++++++++++++++++++++++++++++
arch/arm/mach-at91/include/mach/clk.h | 2 ++ 2 files changed, 40 insertions(+)
Tested on the smartweb board, see log: http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/... otlog
Tested-by: Heiko Schocher hs@denx.de
Thank you very much for your effort for ALL series.
bye, Heiko
diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index c8b5e10..c8d24ae 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -18,6 +18,8 @@ # error You need to define CONFIG_AT91FAMILY in your board config! #endif
+#define EN_PLLB_TIMEOUT 500
DECLARE_GLOBAL_DATA_PTR;
static unsigned long at91_css_to_rate(unsigned long css) @@ -242,3
+244,39 @@ void at91_mck_init(u32 mckr) while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) ; }
+int at91_pllb_clk_enable(u32 pllbr) +{
- struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- ulong start_time, tmp_time;
- start_time = get_timer(0);
- writel(pllbr, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) {
tmp_time = get_timer(0);if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {printf("ERROR: failed to enable PLLB\n");return -1;}- }
- return 0;
+}
+int at91_pllb_clk_disable(void) +{
- struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- ulong start_time, tmp_time;
- start_time = get_timer(0);
- writel(0, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) {
tmp_time = get_timer(0);if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {printf("ERROR: failed to disable PLLB\n");return -1;}- }
- return 0;
+} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index b2604ef..64dec52 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -133,5 +133,7 @@ void at91_system_clk_disable(int sys_clk); int at91_upll_clk_enable(void); int at91_upll_clk_disable(void); void at91_usb_clk_init(u32 value); +int at91_pllb_clk_enable(u32 pllbr); +int at91_pllb_clk_disable(void);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
-- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Best Regards, Wenyou Yang
On 09.12.2015 05:29, Wenyou Yang wrote:
To avoid the duplicated code, add the PLLB handle functions.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas.devel@googlemail.com
arch/arm/mach-at91/arm926ejs/clock.c | 38 +++++++++++++++++++++++++++++++++ arch/arm/mach-at91/include/mach/clk.h | 2 ++ 2 files changed, 40 insertions(+)
diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index c8b5e10..c8d24ae 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -18,6 +18,8 @@ # error You need to define CONFIG_AT91FAMILY in your board config! #endif
+#define EN_PLLB_TIMEOUT 500
DECLARE_GLOBAL_DATA_PTR;
static unsigned long at91_css_to_rate(unsigned long css) @@ -242,3 +244,39 @@ void at91_mck_init(u32 mckr) while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) ; }
+int at91_pllb_clk_enable(u32 pllbr) +{
- struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- ulong start_time, tmp_time;
- start_time = get_timer(0);
- writel(pllbr, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) {
tmp_time = get_timer(0);if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {printf("ERROR: failed to enable PLLB\n");return -1;}- }
- return 0;
+}
+int at91_pllb_clk_disable(void) +{
- struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- ulong start_time, tmp_time;
- start_time = get_timer(0);
- writel(0, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) {
tmp_time = get_timer(0);if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) {printf("ERROR: failed to disable PLLB\n");return -1;}- }
- return 0;
+} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index b2604ef..64dec52 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -133,5 +133,7 @@ void at91_system_clk_disable(int sys_clk); int at91_upll_clk_enable(void); int at91_upll_clk_disable(void); void at91_usb_clk_init(u32 value); +int at91_pllb_clk_enable(u32 pllbr); +int at91_pllb_clk_disable(void);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable/disable code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
drivers/usb/host/ohci-at91.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 6ae6959..6431802 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -9,20 +9,13 @@
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/clk.h>
int usb_cpu_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init()); + #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2); #endif @@ -45,8 +38,6 @@ int usb_cpu_init(void)
int usb_cpu_stop(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - at91_periph_clk_disable(ATMEL_ID_UHP);
at91_system_clk_disable(ATMEL_PMC_UHP); @@ -58,10 +49,9 @@ int usb_cpu_stop(void) #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(0); #endif - /* Disable PLLB */ - writel(0, &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) - ; + + at91_pllb_clk_disable(); + #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) if (at91_upll_clk_disable()) return -1;
Hello Wenyou,
Am 09.12.2015 um 05:29 schrieb Wenyou Yang:
Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable/disable code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
drivers/usb/host/ohci-at91.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-)
Tested on the smartweb board, see log: http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/...
Tested-by: Heiko Schocher hs@denx.de
bye, Heiko
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 6ae6959..6431802 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -9,20 +9,13 @@
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/clk.h>
int usb_cpu_init(void) {
- at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
- /* Enable PLLB */
- writel(get_pllb_init(), &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
- at91_pllb_clk_enable(get_pllb_init());
- #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2); #endif
@@ -45,8 +38,6 @@ int usb_cpu_init(void)
int usb_cpu_stop(void) {
at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
at91_periph_clk_disable(ATMEL_ID_UHP);
at91_system_clk_disable(ATMEL_PMC_UHP);
@@ -58,10 +49,9 @@ int usb_cpu_stop(void) #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(0); #endif
- /* Disable PLLB */
- writel(0, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
- at91_pllb_clk_disable();
- #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) if (at91_upll_clk_disable()) return -1;
Hi Wenyou,
On 09.12.2015 05:29, Wenyou Yang wrote:
Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable/disable code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
drivers/usb/host/ohci-at91.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 6ae6959..6431802 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -9,20 +9,13 @@
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/clk.h>
int usb_cpu_init(void) {
- at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
- /* Enable PLLB */
- writel(get_pllb_init(), &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
- at91_pllb_clk_enable(get_pllb_init());
you introduced this function in 'ARM: at91: clock: add PLLB enable/disable functions' with some timeout checking and respective return value. Please respect this return value here and exit from usb_cpu_init() on wrong PLLB setup.
#ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2); #endif @@ -45,8 +38,6 @@ int usb_cpu_init(void)
int usb_cpu_stop(void) {
at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
at91_periph_clk_disable(ATMEL_ID_UHP);
at91_system_clk_disable(ATMEL_PMC_UHP);
@@ -58,10 +49,9 @@ int usb_cpu_stop(void) #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(0); #endif
- /* Disable PLLB */
- writel(0, &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
- at91_pllb_clk_disable();
same for the disable function.
#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) if (at91_upll_clk_disable()) return -1;
Andreas
Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
board/siemens/smartweb/smartweb.c | 6 +----- board/siemens/taurus/taurus.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index e7ee65c..47a60a7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -115,12 +115,8 @@ static void smartweb_macb_hw_init(void)
void at91_udp_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init());
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 9374064..b0385d8 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -289,12 +289,8 @@ void spi_cs_deactivate(struct spi_slave *slave)
void at91_udp_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init());
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP);
Hello Wenyou,
Am 09.12.2015 um 05:29 schrieb Wenyou Yang:
Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
board/siemens/smartweb/smartweb.c | 6 +----- board/siemens/taurus/taurus.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-)
Tested on the smartweb board, see log: http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/...
Tested-by: Heiko Schocher hs@denx.de
bye, Heiko
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index e7ee65c..47a60a7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -115,12 +115,8 @@ static void smartweb_macb_hw_init(void)
void at91_udp_hw_init(void) {
- at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- /* Enable PLLB */
- writel(get_pllb_init(), &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
at91_pllb_clk_enable(get_pllb_init());
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP);
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 9374064..b0385d8 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -289,12 +289,8 @@ void spi_cs_deactivate(struct spi_slave *slave)
void at91_udp_hw_init(void) {
- at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- /* Enable PLLB */
- writel(get_pllb_init(), &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
at91_pllb_clk_enable(get_pllb_init());
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP);
On 09.12.2015 05:29, Wenyou Yang wrote:
Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com
Reviewed-by: Andreas Bießmann andreas.devel@googlemail.com
board/siemens/smartweb/smartweb.c | 6 +----- board/siemens/taurus/taurus.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index e7ee65c..47a60a7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -115,12 +115,8 @@ static void smartweb_macb_hw_init(void)
void at91_udp_hw_init(void) {
- at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- /* Enable PLLB */
- writel(get_pllb_init(), &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
at91_pllb_clk_enable(get_pllb_init());
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP);
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 9374064..b0385d8 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -289,12 +289,8 @@ void spi_cs_deactivate(struct spi_slave *slave)
void at91_udp_hw_init(void) {
- at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
- /* Enable PLLB */
- writel(get_pllb_init(), &pmc->pllbr);
- while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
at91_pllb_clk_enable(get_pllb_init());
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP);
participants (4)
-
Andreas Bießmann -
Heiko Schocher -
Wenyou Yang -
Yang, Wenyou