Hi Wolfgang Denk,

Thank you for the reply. Yes I am talking about "redundant environment".

If we have four "redundant environment" copies in the same partition(mtd1)... Does the below fw_env.config configuration hold good ?

#################################################### # File: fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundand # environment sector is assumed present.

# MTD device name Device offset Env. size Flash sector size /dev/mtd1 0x00000 0x02000 0x20000 /dev/mtd1 0x20000 0x02000 0x20000 /dev/mtd1 0x40000 0x02000 0x20000 /dev/mtd1 0x60000 0x02000 0x20000 ####################################################

Thanks & Regards Amarendra Reddy

-----Original Message----- From: Wolfgang Denk [mailto:wd@denx.de] Sent: Thursday, April 28, 2011 3:58 PM To: Amarendra Reddy Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] fw_setenv usage for multiple copies of U-Boot Environment Variables

Dear Amarendra Reddy,

In message FACCDA52663F0249A0002E4E413B0AA7E62D7F@POCITMSEXMB01.LntUniverse.com you wrote:

Consider we have multiple copies of U-Boot Environment Variables. Each copy protected by CRC value.

Your question is not quite clear. I assume you are talking about what we call "redundant environment".

Can we use fw_printenv and fw_setenv utilities from Linux Application ?

Yes, fw_printenv and fw_setenv can handle redundant environment setups.

Best regards,

Wolfgang Denk

-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de In the beginning there was nothing. And the Lord said "Let There Be Light!" And still there was nothing, but at least now you could see it.

Larsen & Toubro Limited

www.larsentoubro.com

This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.