[U-Boot-Users] [Newbie] Question on U-Boot POST
Hi all,
My configuration is a U-Boot-1.1.2 working on MPC8280 based Rattler board. When I am trying to run Watchdog test on the card, it fails always.
In the config file. Rattler.h, I have the following related to watchdog:
#define CONFIG_WATCHDOG #define CONFIG_POST (CFG_POST_CPU | \ CFG_POST_WATCHDOG )
Is there anything else that is missed out? Thanks for all the help provided.
With Regards, C.R.Srivatsan
In message 3B58B875DBDE504F94D2A1A1C9DF6F1FF6EE36@bglnt005.asia.ad.flextronics.com you wrote:
My configuration is a U-Boot-1.1.2 working on MPC8280 based Rattlerboard. When I am trying to run Watchdog test on the card, it fails always.
In the config file. Rattler.h, I have the following related to watchdog:
#define CONFIG_WATCHDOG #define CONFIG_POST (CFG_POST_CPU | \ CFG_POST_WATCHDOG )
Is there anything else that is missed out? Thanks for all the help provided.
The code was tested on MPC8xx only.
------_=_NextPart_001_01C57168.F2070150 Content-Type: text/html Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
Please never post HTML on this list!
Best regards,
Wolfgang Denk
participants (2)
-
Srivatsan CR -
Wolfgang Denk