[U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
What might be the problem here?
Le 05/12/2010 02:27, Clint Adams a écrit :
Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
What might be the problem here?
There are a couple of fixes to ARM boards which were not in 2010.12-rc2 and may not even be on master actually. Look up Andreas' patches for r8 preservation, notably. These may not solve your problem but they're needed anyway.
Amicalement,
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Clint Adams Sent: Sunday, December 05, 2010 6:58 AM To: u-boot@lists.denx.de Subject: [U-Boot] failure to boot GuruPlug with v2010.12-rc2 .kwb
Loading the ELF v2010.12-rc2 into RAM with OpenOCD works to boot my GuruPlug, but flashing the u-boot.kwb to /dev/mtd0 results in a brick.
What might be the problem here?
I will cross check this, BTW: I have checked with Sheevaplug and boots properly.
Regards.. Prafulla . .
participants (3)
-
Albert ARIBAUD -
Clint Adams -
Prafulla Wadaskar