Hi Guillaume,

On 09/11/2014 02:59 AM, Guillaume GARDET wrote:

Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one.

Signed-off-by: Guillaume GARDET guillaume.gardet@free.fr Cc: Stefano Babic sbabic@denx.de Cc: Eric Nelson eric.nelson@boundarydevices.com

---

include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d4b0ac9..2a1eb3b 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -186,7 +186,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \

• "mmcdev=0\0" \

• "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \

@@ -238,16 +238,19 @@ "fi;\0"

#define CONFIG_BOOTCOMMAND \

•   "mmc dev ${mmcdev}; if mmc rescan; then " \
  

•    "if run loadbootscript; then " \
  

• 	   "run bootscript; " \
  

•    "else " \
  

• 	   "if run loaduimage; then " \
  

• 		   "run mmcboot; " \
  

• 	   "else run netboot; " \
  

• 	   "fi; " \
  

•    "fi; " \
  

•   "else run netboot; fi"
  

If you add one more loop here, you can get SATA support and end up with something very close to the Nitrogen6x configuration!

• "for mmcdev in ${mmcdevs}; do " \

• "mmc dev ${mmcdev}; " \
  

• "if mmc rescan; then " \
  

• 	"if run loadbootscript; then " \
  

• 		"run bootscript; " \
  

• 	"else " \
  

• 		"if run loaduimage; then " \
  

• 			"run mmcboot; " \
  

• 		"fi; " \
  

• 	"fi; " \
  

• "fi; " \
  

• "done; " \
• "run netboot; "

#else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \

Reviewed-by: Eric Nelson eric.nelson@boundarydevices.com Acked-by: Eric Nelson eric.nelson@boundarydevices.com