[U-Boot] [PATCH v4 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x

Equivalent code that disables the hidden i2c0 slave already exists in the Turris Omnia platform specific code. But this hidden i2c0 slave that interferes the i2c bus is not board specific. Armada 38x SoCs and at least some Kirkwood variants are affected as well. Add code to disable this slave to the i2c bus driver to make it work on all affected hardware.
Use the bind callback because we want this to always run at boot, regardless of whether U-Boot uses the i2c bus.
Cc: Rabeeh Khoury rabeeh@solid-run.com Cc: Chris Packham judge.packham@gmail.com Reviewed-by: Stefan Roese sr@denx.de Reviewed-by: Heiko Schocher hs@denx.de Signed-off-by: Baruch Siach baruch@tkos.co.il --- v4: * Add dummy 'debug' field to sunxi instead of platform #ifdef around the 'debug' field access (Stefan Roese, Heiko Schocher)
v3: * Fix build for SUNXI (Heiko Schocher)
v2: * Use clrbits_le32 (Stefan Roese)
* Apply to Kirkwood (Chris Packham)
* Add review tags from Stefan and Heiko --- drivers/i2c/mvtwsi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index f9822e56b894..74ac0a4aa789 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -11,6 +11,7 @@ #include <i2c.h> #include <linux/errno.h> #include <asm/io.h> +#include <linux/bitops.h> #include <linux/compat.h> #ifdef CONFIG_DM_I2C #include <dm.h> @@ -57,6 +58,7 @@ struct mvtwsi_registers { u32 status; u32 baudrate; u32 soft_reset; + u32 debug; /* Dummy field for build compatibility with mvebu */ };
#else @@ -70,8 +72,10 @@ struct mvtwsi_registers { u32 baudrate; /* When writing */ }; u32 xtnd_slave_addr; - u32 reserved[2]; + u32 reserved0[2]; u32 soft_reset; + u32 reserved1[27]; + u32 debug; };
#endif @@ -795,6 +799,23 @@ static int mvtwsi_i2c_ofdata_to_platdata(struct udevice *bus) return 0; }
+static void twsi_disable_i2c_slave(struct mvtwsi_registers *twsi) +{ + clrbits_le32(&twsi->debug, BIT(18)); +} + +static int mvtwsi_i2c_bind(struct udevice *bus) +{ + struct mvtwsi_registers *twsi = devfdt_get_addr_ptr(bus); + + /* Disable the hidden slave in i2c0 of these platforms */ + if ((IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_KIRKWOOD)) + && bus->req_seq == 0) + twsi_disable_i2c_slave(twsi); + + return 0; +} + static int mvtwsi_i2c_probe(struct udevice *bus) { struct mvtwsi_i2c_dev *dev = dev_get_priv(bus); @@ -850,6 +871,7 @@ U_BOOT_DRIVER(i2c_mvtwsi) = { .name = "i2c_mvtwsi", .id = UCLASS_I2C, .of_match = mvtwsi_i2c_ids, + .bind = mvtwsi_i2c_bind, .probe = mvtwsi_i2c_probe, .ofdata_to_platdata = mvtwsi_i2c_ofdata_to_platdata, .priv_auto_alloc_size = sizeof(struct mvtwsi_i2c_dev),

Code that disables the i2c slave is now in the mvtwsi i2c driver. Platform must enable DM_I2C to use that code. Add a comment in the code as a reminder for the planned DM_I2C migration of Turris Omnia.
Reviewed-by: Heiko Schocher hs@denx.de Signed-off-by: Baruch Siach baruch@tkos.co.il --- v2: Add Reviewed-by from Heiko --- board/CZ.NIC/turris_omnia/turris_omnia.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index da663cf1bb0c..160d30cd795a 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -321,7 +321,11 @@ int board_early_init_f(void) writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04); writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
- /* Disable I2C debug mode blocking 0x64 I2C address */ + /* + * Disable I2C debug mode blocking 0x64 I2C address. + * Note: that would be redundant once Turris Omnia migrates to DM_I2C, + * because the mvtwsi driver includes equivalent code. + */ i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG); i2c_debug_reg &= ~(1<<18); writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);

Hello Baruch,
Am 07.06.2018 um 11:38 schrieb Baruch Siach:
Code that disables the i2c slave is now in the mvtwsi i2c driver. Platform must enable DM_I2C to use that code. Add a comment in the code as a reminder for the planned DM_I2C migration of Turris Omnia.
Reviewed-by: Heiko Schocher hs@denx.de Signed-off-by: Baruch Siach baruch@tkos.co.il
v2: Add Reviewed-by from Heiko
board/CZ.NIC/turris_omnia/turris_omnia.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
Applied to u-boot-i2c.git master
Thanks!
bye, Heiko

Hello Baruch,
Am 07.06.2018 um 11:38 schrieb Baruch Siach:
Equivalent code that disables the hidden i2c0 slave already exists in the Turris Omnia platform specific code. But this hidden i2c0 slave that interferes the i2c bus is not board specific. Armada 38x SoCs and at least some Kirkwood variants are affected as well. Add code to disable this slave to the i2c bus driver to make it work on all affected hardware.
Use the bind callback because we want this to always run at boot, regardless of whether U-Boot uses the i2c bus.
Cc: Rabeeh Khoury rabeeh@solid-run.com Cc: Chris Packham judge.packham@gmail.com Reviewed-by: Stefan Roese sr@denx.de Reviewed-by: Heiko Schocher hs@denx.de Signed-off-by: Baruch Siach baruch@tkos.co.il
v4:
- Add dummy 'debug' field to sunxi instead of platform #ifdef around the 'debug' field access (Stefan Roese, Heiko Schocher)
v3:
- Fix build for SUNXI (Heiko Schocher)
v2:
Use clrbits_le32 (Stefan Roese)
Apply to Kirkwood (Chris Packham)
Add review tags from Stefan and Heiko
drivers/i2c/mvtwsi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
Applied to u-boot-i2c.git master
Thanks!
bye, Heiko
participants (2)
-
Baruch Siach
-
Heiko Schocher