[PATCH 1/3] ARM: stm32: Enable assorted ST specific commands on DHSOM
Enable the stm32prog, stm32key, stboard commands on DHSOM. Those can be used e.g. to implement verified boot.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index fd261d96105..92ccbb70939 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SPL=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STBOARD=y CONFIG_TARGET_DH_STM32MP1_PDK2=y +CONFIG_CMD_STM32PROG=y +CONFIG_CMD_STM32PROG_OTP=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 947bc6b502e..306221404df 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SPL=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STBOARD=y CONFIG_TARGET_DH_STM32MP1_PDK2=y +CONFIG_CMD_STM32PROG=y +CONFIG_CMD_STM32PROG_OTP=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set
Increment the boot counter already in U-Boot SPL instead of incrementing it only later in U-Boot proper. This can be used by SPL to boot either of two U-Boot copies and improve redundancy of software on the platform, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- configs/stm32mp15_dhcom_basic_defconfig | 1 + configs/stm32mp15_dhcor_basic_defconfig | 1 + 2 files changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 92ccbb70939..f1eb022bc66 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -36,6 +36,7 @@ CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x30000000 diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 306221404df..2e9f2049784 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -34,6 +34,7 @@ CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x30000000
Hi
On 12/6/22 03:35, Marek Vasut wrote:
Increment the boot counter already in U-Boot SPL instead of incrementing it only later in U-Boot proper. This can be used by SPL to boot either of two U-Boot copies and improve redundancy of software on the platform, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 1 + configs/stm32mp15_dhcor_basic_defconfig | 1 + 2 files changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 92ccbb70939..f1eb022bc66 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -36,6 +36,7 @@ CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x30000000 diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 306221404df..2e9f2049784 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -34,6 +34,7 @@ CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x30000000
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
On 12/6/22 08:39, Patrice CHOTARD wrote:
Hi
On 12/6/22 03:35, Marek Vasut wrote:
Increment the boot counter already in U-Boot SPL instead of incrementing it only later in U-Boot proper. This can be used by SPL to boot either of two U-Boot copies and improve redundancy of software on the platform, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 1 + configs/stm32mp15_dhcor_basic_defconfig | 1 + 2 files changed, 2 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 92ccbb70939..f1eb022bc66 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -36,6 +36,7 @@ CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x30000000 diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 306221404df..2e9f2049784 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -34,6 +34,7 @@ CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x30000000
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
Applied to u-boot-stm/master
Thanks Patrice
Hi,
On 12/6/22 03:35, Marek Vasut wrote:
Increment the boot counter already in U-Boot SPL instead of incrementing it only later in U-Boot proper. This can be used by SPL to boot either of two U-Boot copies and improve redundancy of software on the platform, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 1 + configs/stm32mp15_dhcor_basic_defconfig | 1 + 2 files changed, 2 insertions(+)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Enable watchdog timer on the DHSOM by default, both in U-Boot proper and in SPL. This can be used in combination with boot counter by either SPL or U-Boot proper to boot either copy of system software, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- configs/stm32mp15_dhcom_basic_defconfig | 2 ++ configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index f1eb022bc66..26c2e73aa04 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -175,6 +175,8 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y CONFIG_FAT_WRITE=y # CONFIG_BINMAN_FDT is not set CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 2e9f2049784..f76e13eafd7 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -174,6 +174,8 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y CONFIG_FAT_WRITE=y # CONFIG_BINMAN_FDT is not set CONFIG_FDT_FIXUP_PARTITIONS=y
Hi Marek
On 12/6/22 03:35, Marek Vasut wrote:
Enable watchdog timer on the DHSOM by default, both in U-Boot proper and in SPL. This can be used in combination with boot counter by either SPL or U-Boot proper to boot either copy of system software, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 2 ++ configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index f1eb022bc66..26c2e73aa04 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -175,6 +175,8 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y CONFIG_FAT_WRITE=y # CONFIG_BINMAN_FDT is not set CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 2e9f2049784..f76e13eafd7 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -174,6 +174,8 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y CONFIG_FAT_WRITE=y # CONFIG_BINMAN_FDT is not set CONFIG_FDT_FIXUP_PARTITIONS=y
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
On 12/6/22 08:38, Patrice CHOTARD wrote:
Hi Marek
On 12/6/22 03:35, Marek Vasut wrote:
Enable watchdog timer on the DHSOM by default, both in U-Boot proper and in SPL. This can be used in combination with boot counter by either SPL or U-Boot proper to boot either copy of system software, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 2 ++ configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index f1eb022bc66..26c2e73aa04 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -175,6 +175,8 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y CONFIG_FAT_WRITE=y # CONFIG_BINMAN_FDT is not set CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 2e9f2049784..f76e13eafd7 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -174,6 +174,8 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y CONFIG_FAT_WRITE=y # CONFIG_BINMAN_FDT is not set CONFIG_FDT_FIXUP_PARTITIONS=y
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
Applied to u-boot-stm/master
Thanks Patrice
Hi,
On 12/6/22 03:35, Marek Vasut wrote:
Enable watchdog timer on the DHSOM by default, both in U-Boot proper and in SPL. This can be used in combination with boot counter by either SPL or U-Boot proper to boot either copy of system software, e.g. in case of full A/B update strategy.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 2 ++ configs/stm32mp15_dhcor_basic_defconfig | 2 ++ 2 files changed, 4 insertions(+)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Hi
On 12/6/22 03:35, Marek Vasut wrote:
Enable the stm32prog, stm32key, stboard commands on DHSOM. Those can be used e.g. to implement verified boot.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index fd261d96105..92ccbb70939 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SPL=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STBOARD=y CONFIG_TARGET_DH_STM32MP1_PDK2=y +CONFIG_CMD_STM32PROG=y +CONFIG_CMD_STM32PROG_OTP=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 947bc6b502e..306221404df 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SPL=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STBOARD=y CONFIG_TARGET_DH_STM32MP1_PDK2=y +CONFIG_CMD_STM32PROG=y +CONFIG_CMD_STM32PROG_OTP=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
On 12/6/22 08:39, Patrice CHOTARD wrote:
Hi
On 12/6/22 03:35, Marek Vasut wrote:
Enable the stm32prog, stm32key, stboard commands on DHSOM. Those can be used e.g. to implement verified boot.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index fd261d96105..92ccbb70939 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SPL=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STBOARD=y CONFIG_TARGET_DH_STM32MP1_PDK2=y +CONFIG_CMD_STM32PROG=y +CONFIG_CMD_STM32PROG_OTP=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 947bc6b502e..306221404df 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SPL=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STBOARD=y CONFIG_TARGET_DH_STM32MP1_PDK2=y +CONFIG_CMD_STM32PROG=y +CONFIG_CMD_STM32PROG_OTP=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
Applied to u-boot-stm/master
Thanks Patrice
Hi,
On 12/6/22 03:35, Marek Vasut wrote:
Enable the stm32prog, stm32key, stboard commands on DHSOM. Those can be used e.g. to implement verified boot.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
participants (3)
-
Marek Vasut -
Patrice CHOTARD -
Patrick DELAUNAY