From: Marcel Ziswiler marcel.ziswiler@toradex.com

The implicit fallback mechanism for searching the whole MDIO bus for at least one PHY has been gone with the following commit b882005a18de ("drivers/net/fec: phy_init: remove redundant logic"). This lead to the Ethernet driver erroring out as follows:

Net: Could not get PHY for FEC0: addr -19 eth-1: fec@400d1000 Colibri VFxx # dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 Colibri VFxx #

This commit adds an explicit PHY node which makes it work again.

Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com Reviewed-by: Hannes Schmelzer hannes.schmelzer@br-automation.com Reviewed-by: Igor Opaniuk igor.opaniuk@toradex.com

---

Changes in v2: - Added Hannes and Igor's reviewed-by.

arch/arm/dts/vf-colibri.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi index 5ce17076e9..91ca4e4ddd 100644 --- a/arch/arm/dts/vf-colibri.dtsi +++ b/arch/arm/dts/vf-colibri.dtsi @@ -60,11 +60,24 @@ status = "okay"; };

+/* Ethernet */ &fec1 { phy-mode = "rmii"; + phy-handle = <&ethphy1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <1>; + }; + }; };

&i2c0 {