[U-Boot-Users] pci problem with arm-integrator AP and linux 2.6
I'm having some trouble on running linux with PCI support on my ARM integrator board.
If I do not put PCI support on the kernel configuration, the kernel starts and everything works fine, if I just enable the PCI support the kernel stuck somewhere.
Somebody has an idea on where is the problem ?
Thanks, Thierry Matalini
Thierry Matalini thierry.matalini@gmail.com wrote:
I'm having some trouble on running linux with PCI support on my ARM integrator board.
If I do not put PCI support on the kernel configuration, the kernel starts and everything works fine, if I just enable the PCI support the kernel stuck somewhere.
Is this U-Boot related? If not, you could try the ARM Linux Kernel mailing list (and add a bit more details like the full kernel version).
Catalin
In message db724d8f050223073931a47b08@mail.gmail.com you wrote:
I'm having some trouble on running linux with PCI support on my ARM integrator board.
And what exactly was yourt U-Boot problem?
This mailing list is for U-Boot related questions only.
Best regards,
Wolfgang Denk
participants (3)
-
Catalin Marinas -
Thierry Matalini -
Wolfgang Denk