[U-Boot] [PATCH 6/8] Convert CONFIG_BOOTCOUNT_I2C to Kconfig
This converts the following to Kconfig: CONFIG_BOOTCOUNT_I2C
Signed-off-by: Alex Kiernan alex.kiernan@gmail.com ---
README | 6 ------ configs/ids8313_defconfig | 1 + drivers/bootcount/Kconfig | 9 +++++++++ include/configs/ids8313.h | 1 - scripts/config_whitelist.txt | 1 - 5 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/README b/README index 20637e0..a7b0890 100644 --- a/README +++ b/README @@ -2321,12 +2321,6 @@ The following options need to be configured: enable special bootcounter support on at91sam9xe based boards. CONFIG_SOC_DA8XX enable special bootcounter support on da850 based boards. - CONFIG_BOOTCOUNT_I2C - enable support for the bootcounter on an i2c (like RTC) device. - CONFIG_SYS_I2C_RTC_ADDR = i2c chip address - CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for - the bootcounter. - CONFIG_BOOTCOUNT_ALEN = address len CONFIG_BOOTCOUNT_EXT enable support for the bootcounter in EXT filesystem CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 3e67c55..eb931ce 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -30,6 +30,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)" CONFIG_CMD_UBI=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_I2C=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index eabfd13..8c19ae6 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -46,6 +46,15 @@ config BOOTCOUNT_RAM Store the bootcount in DRAM protected against against bit errors due to short power loss or holding a system in RESET.
+config BOOTCOUNT_I2C + bool "Boot counter on I2C device" + help + Enable support for the bootcounter on an i2c (like RTC) device. + CONFIG_SYS_I2C_RTC_ADDR = i2c chip address + CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for + the bootcounter. + CONFIG_BOOTCOUNT_ALEN = address len + endchoice
config SYS_BOOTCOUNT_SINGLEWORD diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 529cbf1..fe39221 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -516,7 +516,6 @@ #define CONFIG_MTD_PARTITIONS
/* bootcount support */ -#define CONFIG_BOOTCOUNT_I2C #define CONFIG_BOOTCOUNT_ALEN 1 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 487c790..aa1d51f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -148,7 +148,6 @@ CONFIG_BOOGER CONFIG_BOOM CONFIG_BOOTBLOCK CONFIG_BOOTCOUNT_ALEN -CONFIG_BOOTCOUNT_I2C CONFIG_BOOTCOUNT_LIMIT CONFIG_BOOTFILE CONFIG_BOOTMAPSZ
On Sun, 11 Feb 2018 12:06:51 +0000 Alex Kiernan alex.kiernan@gmail.com wrote:
This converts the following to Kconfig: CONFIG_BOOTCOUNT_I2C
Signed-off-by: Alex Kiernan alex.kiernan@gmail.com
README | 6 ------ configs/ids8313_defconfig | 1 + drivers/bootcount/Kconfig | 9 +++++++++ include/configs/ids8313.h | 1 - scripts/config_whitelist.txt | 1 - 5 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/README b/README index 20637e0..a7b0890 100644 --- a/README +++ b/README @@ -2321,12 +2321,6 @@ The following options need to be configured: enable special bootcounter support on at91sam9xe based boards. CONFIG_SOC_DA8XX enable special bootcounter support on da850 based boards.
CONFIG_BOOTCOUNT_I2Cenable support for the bootcounter on an i2c (likeRTC) device.
CONFIG_SYS_I2C_RTC_ADDR = i2c chip addressCONFIG_SYS_BOOTCOUNT_ADDR = i2c addr whichis used for
the bootcounter.CONFIG_BOOTCOUNT_ALEN = address lenfor read diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 3e67c55..eb931ce 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -30,6 +30,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)" CONFIG_CMD_UBI=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_I2C=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index eabfd13..8c19ae6 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -46,6 +46,15 @@ config BOOTCOUNT_RAM Store the bootcount in DRAM protected against against bit errors due to short power loss or holding a system in RESET.
+config BOOTCOUNT_I2C
- bool "Boot counter on I2C device"
- help
Enable support for the bootcounter on an i2c (like RTC)device.
CONFIG_SYS_I2C_RTC_ADDR = i2c chip addressCONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used forthe bootcounter.CONFIG_BOOTCOUNT_ALEN = address lenendchoice
config SYS_BOOTCOUNT_SINGLEWORD diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 529cbf1..fe39221 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -516,7 +516,6 @@ #define CONFIG_MTD_PARTITIONS
/* bootcount support */ -#define CONFIG_BOOTCOUNT_I2C #define CONFIG_BOOTCOUNT_ALEN 1 #define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 487c790..aa1d51f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -148,7 +148,6 @@ CONFIG_BOOGER CONFIG_BOOM CONFIG_BOOTBLOCK CONFIG_BOOTCOUNT_ALEN -CONFIG_BOOTCOUNT_I2C CONFIG_BOOTCOUNT_LIMIT CONFIG_BOOTFILE CONFIG_BOOTMAPSZ
Reviewed-by: Lukasz Majewski lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
participants (2)
-
Alex Kiernan -
Lukasz Majewski