[U-Boot] [PATCH] integrator: update the Integrator/CP config
The Integrator/CP config file was very outdated and gives a non functional U-Boot. So:
- Set the CONFIG_ARCH_CINTEGRATOR arch flag correctly - Add proper core module configuration options - Skip cluttered command lista and just include <config_cmd_default.h> - Kill off #if 0 network section and insert some example configuration that simply just boots from the network using TFTP if available. - Delete flash control registers that have no business in this config file. These are already moved down to board/armltd/integrator/integrator-sc.h
Cc: Will Deacon will.deacon@arm.com Signed-off-by: Linus Walleij linus.walleij@linaro.org --- include/configs/integratorcp.h | 47 +++++++++++---------------------------- 1 files changed, 13 insertions(+), 34 deletions(-)
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index ccbdf44..57610a6 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -31,8 +31,13 @@ #ifndef __CONFIG_H #define __CONFIG_H
+/* Integrator-specific configuration */ #define CONFIG_INTEGRATOR -#define CONFIG_ARCH_INTEGRATOR +#define CONFIG_ARCH_CINTEGRATOR +#define CONFIG_CM_INIT +#define CONFIG_CM_REMAP +#define CONFIG_CM_SPD_DETECT + /* * High Level Configuration Options * (easy to change) @@ -47,6 +52,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */ + /* * Size of malloc() pool */ @@ -85,32 +91,14 @@ /* * Command line configuration. */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING - +#include <config_cmd_default.h>
-#if 0 #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" -#define CONFIG_BOOTCOMMAND "bootp ; bootm" -#endif -/* The kernel command line & boot command below are for a platform flashed with afu.axf - -Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot -Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux -Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs -SIB at Block62 End Block62 address 0x24f80000 - -*/ -#define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0" -#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +#define CONFIG_BOOTCOMMAND "tftpboot ; bootm" +#define CONFIG_SERVERIP 192.168.1.100 +#define CONFIG_IPADDR 192.168.1.104 +#define CONFIG_BOOTFILE "uImage"
/* * Miscellaneous configurable options @@ -201,15 +189,6 @@ SIB at Block62 End Block62 address 0x24f80000
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #define CONFIG_ENV_SIZE 8192 /* 8KB */ -/*----------------------------------------------------------------------- - * CP control registers - */ -#define CPCR_BASE 0xCB000000 /* CP Registers*/ -#define OS_FLASHPROG 0x00000004 /* Flash register*/ -#define CPMASK_EXTRABANK 0x8 -#define CPMASK_FLASHSIZE 0x4 -#define CPMASK_FLWREN 0x2 -#define CPMASK_FLVPPEN 0x1
/* * The ARM boot monitor initializes the board.
Hi Linus,
Le 31/01/2012 23:20, Linus Walleij a écrit :
The Integrator/CP config file was very outdated and gives a non functional U-Boot. So:
- Set the CONFIG_ARCH_CINTEGRATOR arch flag correctly
- Add proper core module configuration options
- Skip cluttered command lista and just include <config_cmd_default.h>
- Kill off #if 0 network section and insert some example configuration that simply just boots from the network using TFTP if available.
- Delete flash control registers that have no business in this config file. These are already moved down to board/armltd/integrator/integrator-sc.h
Cc: Will Deaconwill.deacon@arm.com Signed-off-by: Linus Walleijlinus.walleij@linaro.org
include/configs/integratorcp.h | 47 +++++++++++---------------------------- 1 files changed, 13 insertions(+), 34 deletions(-)
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index ccbdf44..57610a6 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -31,8 +31,13 @@ #ifndef __CONFIG_H #define __CONFIG_H
+/* Integrator-specific configuration */ #define CONFIG_INTEGRATOR -#define CONFIG_ARCH_INTEGRATOR +#define CONFIG_ARCH_CINTEGRATOR +#define CONFIG_CM_INIT +#define CONFIG_CM_REMAP +#define CONFIG_CM_SPD_DETECT
- /*
- High Level Configuration Options
- (easy to change)
@@ -47,6 +52,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
- /*
*/
- Size of malloc() pool
@@ -85,32 +91,14 @@ /*
- Command line configuration.
*/ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING
+#include<config_cmd_default.h>
-#if 0 #define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" -#define CONFIG_BOOTCOMMAND "bootp ; bootm" -#endif -/* The kernel command line& boot command below are for a platform flashed with afu.axf
-Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot -Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux -Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs -SIB at Block62 End Block62 address 0x24f80000
-*/ -#define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0" -#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" +#define CONFIG_BOOTCOMMAND "tftpboot ; bootm" +#define CONFIG_SERVERIP 192.168.1.100 +#define CONFIG_IPADDR 192.168.1.104 +#define CONFIG_BOOTFILE "uImage"
/*
- Miscellaneous configurable options
@@ -201,15 +189,6 @@ SIB at Block62 End Block62 address 0x24f80000
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #define CONFIG_ENV_SIZE 8192 /* 8KB */ -/*-----------------------------------------------------------------------
- CP control registers
- */
-#define CPCR_BASE 0xCB000000 /* CP Registers*/ -#define OS_FLASHPROG 0x00000004 /* Flash register*/ -#define CPMASK_EXTRABANK 0x8 -#define CPMASK_FLASHSIZE 0x4 -#define CPMASK_FLWREN 0x2 -#define CPMASK_FLVPPEN 0x1
/*
- The ARM boot monitor initializes the board.
Considering as a bug fix for boards which you maintain,
Applied to u-boot-arm/master, thanks!
Amicalement,
participants (2)
-
Albert ARIBAUD -
Linus Walleij