[U-Boot-Users] EP8248
Hi all,
Which kernel source and u-boot version do I have to use to start up Embedded Planet EP8248 evaluation card successfully? Has anyone done it successfully?
Regards.
Daniel Garoz.
Q No imprima este e-mail si no es necesario. Protejamos el Medio Ambiente. E
Este mensaje y sus ficheros adjuntos se dirigen exclusivamente a su destinatario y pueden contener información confidencial y/o sujeta a secreto profesional. Si no es usted el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. Los ficheros adjuntos han sido comprobados con un programa anti virus antes de su transmisión, pero les recomendamos que efectúen sus propias comprobaciones antes de abrir cualquiera de ellos. No aceptamos responsabilidad alguna por daños o pérdidas causados por virus informáticos.
La empresa no asume ningún tipo de responsabilidad legal por el contenido de este mensaje. Cualquier opinión manifestada en el pertenece solo al autor y no representa necesariamente la opinión de la empresa salvo que expresamente se especifique lo contrario.
Dimetronic, S.A. con domicilio en Avda. Castilla nº2, Parque Empresarial San Fernando (Edificio Grecia), 28830 San Fernando de Henares, Madrid, España y CIF A-28512598 se encuentra inscrita en el Registro Mercantil de Madrid al tomo 4.948 general, sección 3ª, folio 23, hoja nº 39135 y Dimetronic S.A., Sucursal Portuguesa con domicilio en Avenida D. João II, Lote 1.16.05, Edificio Infante 3ºQ, 1990-083 Lisboa, Freguesia de Santa Maria dos Olivais, Concelho de Lisboa, (Portugal), NIPC 980 020 891 se encuentra inscrita en el Registro Comercial de Lisboa con el nº 68850/880725.
Dimetronic, S.A. y Dimetronic, S.A. Sucursal Portuguesa son filiales de Invensys, Plc, cuyo domicilio social está en Portland House, Bressenden Place, London SW1E 5BF. Registrada en Inglaterra y Gales con el nº 1641421.
English translation
Tradução portuguesa
On Thu, Aug 23, 2007 at 07:01:31PM +0200, daniel.garoz@dimetronic.com wrote:
Which kernel source and u-boot version do I have to use to start up Embedded Planet EP8248 evaluation card successfully? Has anyone done it successfully?
I don't know of u-boot support for this board, but I have a patch coming soon for kernel support (including bootwrapper support for booting with the PlanetCore firmware that comes on the board).
-Scott
I'm also looking to get an ep8248 loaded with u-boot .
EP reportedly supports the EP8248E with a _purchase-able_ option that I'm looking into. Has anyone used this?
Of course, u-boot 1.0.3/1.0.4 and beyond have an ep8248_config option that exists. I've built 1.2.0 with make ep8248_config, but I haven't been able to successfully boot it on the EP8248E board (EP8248E PCI Edge SBC)...
-alan
-----Original Message----- From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] On Behalf Of Scott Wood Sent: Thursday, August 23, 2007 11:53 AM To: daniel.garoz@dimetronic.com Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] EP8248
On Thu, Aug 23, 2007 at 07:01:31PM +0200, daniel.garoz@dimetronic.com wrote:
Which kernel source and u-boot version do I have to use to start up Embedded Planet EP8248 evaluation card successfully? Has anyone done it successfully?
I don't know of u-boot support for this board, but I have a patch coming soon for kernel support (including bootwrapper support for booting with the PlanetCore firmware that comes on the board).
-Scott
------------------------------------------------------------------------ - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
***************************************************************** ************* CONFIDENTIAL NOTE: This e-mail and any attachments may be confidential and protected by legal privilege. If you are not the intended recipient, be aware that you are hereby notified that any unauthorized review, use, disclosure, dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this email in error, please notify us immediately by replying to the sender and deleting this copy and the reply from your system. Thank you for your cooperation.
EXPORT CONTROLLED DOCUMENT This document may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751 Et Seq.) or the Export Administration Act of 1979, as amended, (Title 50, U.S.C., App. 2401, Et. Seq.) Violations to these export laws are subject to severe criminal penalties.
All technical data forwarded by VT Miltope to its suppliers is EXPORT CONTROLLED. Supplier shall not disclose technical data in any form to a Foreign Person (including foreign person employees of Supplier), or export the technical data from the United States without U.S. Government authority and the written authorization of VT Miltope Contracts Department. ***************************************************************** *************
Hi Alan,
We have been successfull with u-boot 1.2.0 and kernel (both 2.6.19 and 2.4.22 provided by EP). The first time we start u-boot we used the CodeWarrior Flash programmer application... because we were not able to do that with the original boot provided with the EP8248 evaluation card.
If you need some more information do not hesitate to ask for it.
Best regards.
Daniel Garoz.
"Bennett, Alan" Alan.Bennett@miltope.com 27/08/2007 23:44
Para "Scott Wood" scottwood@freescale.com, daniel.garoz@dimetronic.com cc u-boot-users@lists.sourceforge.net Asunto RE: [U-Boot-Users] EP8248
I'm also looking to get an ep8248 loaded with u-boot .
EP reportedly supports the EP8248E with a _purchase-able_ option that I'm looking into. Has anyone used this?
Of course, u-boot 1.0.3/1.0.4 and beyond have an ep8248_config option that exists. I've built 1.2.0 with make ep8248_config, but I haven't been able to successfully boot it on the EP8248E board (EP8248E PCI Edge SBC)...
-alan
-----Original Message----- From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] On Behalf Of Scott Wood Sent: Thursday, August 23, 2007 11:53 AM To: daniel.garoz@dimetronic.com Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] EP8248
On Thu, Aug 23, 2007 at 07:01:31PM +0200, daniel.garoz@dimetronic.com wrote:
Which kernel source and u-boot version do I have to use to start up Embedded Planet EP8248 evaluation card successfully? Has anyone done it successfully?
I don't know of u-boot support for this board, but I have a patch coming soon for kernel support (including bootwrapper support for booting with the PlanetCore firmware that comes on the board).
-Scott
------------------------------------------------------------------------ - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
***************************************************************** ************* CONFIDENTIAL NOTE: This e-mail and any attachments may be confidential and protected by legal privilege. If you are not the intended recipient, be aware that you are hereby notified that any unauthorized review, use, disclosure, dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this email in error, please notify us immediately by replying to the sender and deleting this copy and the reply from your system. Thank you for your cooperation.
EXPORT CONTROLLED DOCUMENT This document may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751 Et Seq.) or the Export Administration Act of 1979, as amended, (Title 50, U.S.C., App. 2401, Et. Seq.) Violations to these export laws are subject to severe criminal penalties.
All technical data forwarded by VT Miltope to its suppliers is EXPORT CONTROLLED. Supplier shall not disclose technical data in any form to a Foreign Person (including foreign person employees of Supplier), or export the technical data from the United States without U.S. Government authority and the written authorization of VT Miltope Contracts Department. ***************************************************************** *************
Q No imprima este e-mail si no es necesario. Protejamos el Medio Ambiente. E
Este mensaje y sus ficheros adjuntos se dirigen exclusivamente a su destinatario y pueden contener información confidencial y/o sujeta a secreto profesional. Si no es usted el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. Los ficheros adjuntos han sido comprobados con un programa anti virus antes de su transmisión, pero les recomendamos que efectúen sus propias comprobaciones antes de abrir cualquiera de ellos. No aceptamos responsabilidad alguna por daños o pérdidas causados por virus informáticos.
La empresa no asume ningún tipo de responsabilidad legal por el contenido de este mensaje. Cualquier opinión manifestada en el pertenece solo al autor y no representa necesariamente la opinión de la empresa salvo que expresamente se especifique lo contrario.
Dimetronic, S.A. con domicilio en Avda. Castilla nº2, Parque Empresarial San Fernando (Edificio Grecia), 28830 San Fernando de Henares, Madrid, España y CIF A-28512598 se encuentra inscrita en el Registro Mercantil de Madrid al tomo 4.948 general, sección 3ª, folio 23, hoja nº 39135 y Dimetronic S.A., Sucursal Portuguesa con domicilio en Avenida D. João II, Lote 1.16.05, Edificio Infante 3ºQ, 1990-083 Lisboa, Freguesia de Santa Maria dos Olivais, Concelho de Lisboa, (Portugal), NIPC 980 020 891 se encuentra inscrita en el Registro Comercial de Lisboa con el nº 68850/880725.
Dimetronic, S.A. y Dimetronic, S.A. Sucursal Portuguesa son filiales de Invensys, Plc, cuyo domicilio social está en Portland House, Bressenden Place, London SW1E 5BF. Registrada en Inglaterra y Gales con el nº 1641421.
English translation
Tradução portuguesa
participants (3)
-
Bennett, Alan -
daniel.garoz＠dimetronic.com -
Scott Wood