Acked-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Tom Rini trini@ti.com --- common/cmd_mmc.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index da5fef9..e118252 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -314,11 +314,18 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

} else if (strcmp(argv[1], "bootpart") == 0) { int dev; - dev = simple_strtoul(argv[2], NULL, 10); + struct *mmc; + u32 bootsize, rpmbsize;

- u32 bootsize = simple_strtoul(argv[3], NULL, 10); - u32 rpmbsize = simple_strtoul(argv[4], NULL, 10); - struct mmc *mmc = find_mmc_device(dev); + if (argc == 5) { + dev = simple_strtoul(argv[2], NULL, 10); + bootsize = simple_strtoul(argv[3], NULL, 10); + rpmbsize = simple_strtoul(argv[4], NULL, 10); + } else { + return CMD_RET_USAGE; + } + + mmc = find_mmc_device(dev); if (!mmc) { printf("no mmc device at slot %x\n", dev); return 1;

Rename 'bootpart' to 'bootpart-resize' to better reflect what this command is for.

Acked-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Tom Rini trini@ti.com --- common/cmd_mmc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index e118252..a322063 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -312,9 +312,9 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* acknowledge to be sent during boot operation */ return boot_part_access(mmc, 1, part_num, access);

- } else if (strcmp(argv[1], "bootpart") == 0) { + } else if (strcmp(argv[1], "bootpart-resize") == 0) { int dev; - struct *mmc; + struct mmc *mmc; u32 bootsize, rpmbsize;

if (argc == 5) { @@ -449,8 +449,8 @@ U_BOOT_CMD( " - Enable boot_part for booting and enable R/W access of boot_part\n" "mmc close <dev> <boot_partition>\n" " - Enable boot_part for booting and disable access to boot_part\n" - "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n" - " - change sizes of boot and RPMB partitions of specified device\n" + "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n" + " - Change sizes of boot and RPMB partitions of specified device\n" #endif "mmc setdsr - set DSR register value\n" );

Add a partconf sub-command to the mmc command to allow for setting the boot_ack, boot_partition and partition_access fields of PARTITION_CONFIG (formerly BOOT_CONFIG, EXT_CSD[179]). Part of this requires changing the check for 'part' from an strncmp to a strcmp, like the rest of the sub-commands.

Cc: Andy Fleming afleming@gmail.com Cc: Pantelis Antoniou panto@antoniou-consulting.com Acked-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Tom Rini trini@ti.com --- common/cmd_mmc.c | 30 +++++++++++++++++++++++++++++- drivers/mmc/mmc.c | 21 +++++++++++++++++++++ include/mmc.h | 2 ++ 3 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index a322063..5842e85 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -195,7 +195,7 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; else return 0; - } else if (strncmp(argv[1], "part", 4) == 0) { + } else if (strcmp(argv[1], "part") == 0) { block_dev_desc_t *mmc_dev; struct mmc *mmc;

@@ -311,7 +311,33 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

/* acknowledge to be sent during boot operation */ return boot_part_access(mmc, 1, part_num, access); + } else if (strcmp(argv[1], "partconf") == 0) { + int dev; + struct mmc *mmc; + u8 ack, part_num, access; + + if (argc == 6) { + dev = simple_strtoul(argv[2], NULL, 10); + ack = simple_strtoul(argv[3], NULL, 10); + part_num = simple_strtoul(argv[4], NULL, 10); + access = simple_strtoul(argv[5], NULL, 10); + } else { + return CMD_RET_USAGE; + } + + mmc = find_mmc_device(dev); + if (!mmc) { + printf("no mmc device at slot %x\n", dev); + return 1; + }

+ if (IS_SD(mmc)) { + puts("PARTITION_CONFIG only exists on eMMC\n"); + return 1; + } + + /* acknowledge to be sent during boot operation */ + return mmc_set_part_conf(mmc, ack, part_num, access); } else if (strcmp(argv[1], "bootpart-resize") == 0) { int dev; struct mmc *mmc; @@ -451,6 +477,8 @@ U_BOOT_CMD( " - Enable boot_part for booting and disable access to boot_part\n" "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n" " - Change sizes of boot and RPMB partitions of specified device\n" + "mmc partconf dev boot_ack boot_partition partition_access\n" + " - Change the bits of the PARTITION_CONFIG field of the specified device\n" #endif "mmc setdsr - set DSR register value\n" ); diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index c6a1c23..1591fce 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1505,4 +1505,25 @@ int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) } return 0; } + +/* + * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG) + * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and + * PARTITION_ACCESS. + * + * Returns 0 on success. + */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +{ + int err; + + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, + EXT_CSD_BOOT_ACK(ack) | + EXT_CSD_BOOT_PART_NUM(part_num) | + EXT_CSD_PARTITION_ACCESS(access)); + + if (err) + return err; + return 0; +} #endif diff --git a/include/mmc.h b/include/mmc.h index e1060b9..7e026da 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -312,6 +312,8 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, unsigned long rpmbsize); /* Function to send commands to open/close the specified boot partition */ int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); +/* Function to modify the PARTITION_CONFIG field of EXT_CSD */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);

/** * Start device initialization and return immediately; it does not block on

Add a bootbus sub-command to the mmc command to allow for setting the boot_bus_width, reset_boot_bus_width and boot_mode fields of BOOT_BUS_WIDTH (EXT_CSD[177]).

Acked-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Tom Rini trini@ti.com --- common/cmd_mmc.c | 29 +++++++++++++++++++++++++++++ drivers/mmc/mmc.c | 21 +++++++++++++++++++++ include/mmc.h | 5 +++++ 3 files changed, 55 insertions(+)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 5842e85..a028149 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -338,6 +338,33 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

/* acknowledge to be sent during boot operation */ return mmc_set_part_conf(mmc, ack, part_num, access); + } else if (strcmp(argv[1], "bootbus") == 0) { + int dev; + struct mmc *mmc; + u8 width, reset, mode; + + if (argc == 6) { + dev = simple_strtoul(argv[2], NULL, 10); + width = simple_strtoul(argv[3], NULL, 10); + reset = simple_strtoul(argv[4], NULL, 10); + mode = simple_strtoul(argv[5], NULL, 10); + } else { + return CMD_RET_USAGE; + } + + mmc = find_mmc_device(dev); + if (!mmc) { + printf("no mmc device at slot %x\n", dev); + return 1; + } + + if (IS_SD(mmc)) { + puts("BOOT_BUS_WIDTH only exists on eMMC\n"); + return 1; + } + + /* acknowledge to be sent during boot operation */ + return mmc_set_boot_bus_width(mmc, width, reset, mode); } else if (strcmp(argv[1], "bootpart-resize") == 0) { int dev; struct mmc *mmc; @@ -475,6 +502,8 @@ U_BOOT_CMD( " - Enable boot_part for booting and enable R/W access of boot_part\n" "mmc close <dev> <boot_partition>\n" " - Enable boot_part for booting and disable access to boot_part\n" + "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n" + " - Set the BOOT_BUS_WIDTH field of the specified device\n" "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n" " - Change sizes of boot and RPMB partitions of specified device\n" "mmc partconf dev boot_ack boot_partition partition_access\n" diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 1591fce..fc1c1dc 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1507,6 +1507,27 @@ int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) }

/* + * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH + * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH + * and BOOT_MODE. + * + * Returns 0 on success. + */ +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode) +{ + int err; + + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_BUS_WIDTH, + EXT_CSD_BOOT_BUS_WIDTH_MODE(mode) | + EXT_CSD_BOOT_BUS_WIDTH_RESET(reset) | + EXT_CSD_BOOT_BUS_WIDTH_WIDTH(width)); + + if (err) + return err; + return 0; +} + +/* * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG) * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and * PARTITION_ACCESS. diff --git a/include/mmc.h b/include/mmc.h index 7e026da..3594286 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -187,6 +187,9 @@ #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) #define EXT_CSD_PARTITION_ACCESS(x) (x << 0)

+#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) +#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) +#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)

#define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) @@ -314,6 +317,8 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); +/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);

/** * Start device initialization and return immediately; it does not block on

The open and close mmc sub-commands implement a hard-coded set of values specific to the SMDK5250 platform. Remove these commands as what they did can be done instead with a series of mmc dev / bootpart / bootbus commands instead now.

Cc: Amar amarendra.xt@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com Acked-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Tom Rini trini@ti.com --- common/cmd_mmc.c | 72 ----------------------------------------------------- drivers/mmc/mmc.c | 65 ----------------------------------------------- include/mmc.h | 2 -- 3 files changed, 139 deletions(-)

diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index a028149..2d51927 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -131,36 +131,6 @@ U_BOOT_CMD( "- display info of the current MMC device" );

-#ifdef CONFIG_SUPPORT_EMMC_BOOT -static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) -{ - int err; - err = mmc_boot_part_access(mmc, ack, part_num, access); - - if ((err == 0) && (access != 0)) { - printf("\t\t\t!!!Notice!!!\n"); - - printf("!You must close EMMC boot Partition"); - printf("after all images are written\n"); - - printf("!EMMC boot partition has continuity"); - printf("at image writing time.\n"); - - printf("!So, do not close the boot partition"); - printf("before all images are written.\n"); - return 0; - } else if ((err == 0) && (access == 0)) - return 0; - else if ((err != 0) && (access != 0)) { - printf("EMMC boot partition-%d OPEN Failed.\n", part_num); - return 1; - } else { - printf("EMMC boot partition-%d CLOSE Failed.\n", part_num); - return 1; - } -} -#endif - static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { enum mmc_state state; @@ -273,44 +243,6 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

return 0; #ifdef CONFIG_SUPPORT_EMMC_BOOT - } else if ((strcmp(argv[1], "open") == 0) || - (strcmp(argv[1], "close") == 0)) { - int dev; - struct mmc *mmc; - u8 part_num, access = 0; - - if (argc == 4) { - dev = simple_strtoul(argv[2], NULL, 10); - part_num = simple_strtoul(argv[3], NULL, 10); - } else { - return CMD_RET_USAGE; - } - - mmc = find_mmc_device(dev); - if (!mmc) { - printf("no mmc device at slot %x\n", dev); - return 1; - } - - if (IS_SD(mmc)) { - printf("SD device cannot be opened/closed\n"); - return 1; - } - - if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) { - printf("Invalid boot partition number:\n"); - printf("Boot partition number cannot be <= 0\n"); - printf("EMMC44 supports only 2 boot partitions\n"); - return 1; - } - - if (strcmp(argv[1], "open") == 0) - access = part_num; /* enable R/W access to boot part*/ - else - access = 0; /* No access to boot partition */ - - /* acknowledge to be sent during boot operation */ - return boot_part_access(mmc, 1, part_num, access); } else if (strcmp(argv[1], "partconf") == 0) { int dev; struct mmc *mmc; @@ -498,10 +430,6 @@ U_BOOT_CMD( "mmc dev [dev] [part] - show or set current mmc device [partition]\n" "mmc list - lists available devices\n" #ifdef CONFIG_SUPPORT_EMMC_BOOT - "mmc open <dev> <boot_partition>\n" - " - Enable boot_part for booting and enable R/W access of boot_part\n" - "mmc close <dev> <boot_partition>\n" - " - Enable boot_part for booting and disable access to boot_part\n" "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n" " - Set the BOOT_BUS_WIDTH field of the specified device\n" "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n" diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index fc1c1dc..3a57ab8 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1442,71 +1442,6 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, }

/* - * This function shall form and send the commands to open / close the - * boot partition specified by user. - * - * Input Parameters: - * ack: 0x0 - No boot acknowledge sent (default) - * 0x1 - Boot acknowledge sent during boot operation - * part_num: User selects boot data that will be sent to master - * 0x0 - Device not boot enabled (default) - * 0x1 - Boot partition 1 enabled for boot - * 0x2 - Boot partition 2 enabled for boot - * access: User selects partitions to access - * 0x0 : No access to boot partition (default) - * 0x1 : R/W boot partition 1 - * 0x2 : R/W boot partition 2 - * 0x3 : R/W Replay Protected Memory Block (RPMB) - * - * Returns 0 on success. - */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) -{ - int err; - struct mmc_cmd cmd; - - /* Boot ack enable, boot partition enable , boot partition access */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_PART_CONF << 16) | - ((EXT_CSD_BOOT_ACK(ack) | - EXT_CSD_BOOT_PART_NUM(part_num) | - EXT_CSD_PARTITION_ACCESS(access)) << 8); - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - if (access) { - debug("mmc boot partition#%d open fail:Error1 = %d\n", - part_num, err); - } else { - debug("mmc boot partition#%d close fail:Error = %d\n", - part_num, err); - } - return err; - } - - if (access) { - /* 4bit transfer mode at booting time. */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_BOOT_BUS_WIDTH << 16) | - ((1 << 0) << 8); - - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - debug("mmc boot partition#%d open fail:Error2 = %d\n", - part_num, err); - return err; - } - } - return 0; -} - -/* * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH * and BOOT_MODE. diff --git a/include/mmc.h b/include/mmc.h index 3594286..e95a237 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -313,8 +313,6 @@ int mmc_set_dsr(struct mmc *mmc, u16 val); /* Function to change the size of boot partition and rpmb partitions */ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, unsigned long rpmbsize); -/* Function to send commands to open/close the specified boot partition */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access); /* Function to modify the PARTITION_CONFIG field of EXT_CSD */ int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */

Add a README to the board which lists the commands required to enable booting from the eMMC boot partitions found on the board.

Signed-off-by: Tom Rini trini@ti.com --- board/ti/omap5_uevm/README | 25 +++++++++++++++++++++++++ include/configs/omap5_uevm.h | 1 + 2 files changed, 26 insertions(+) create mode 100644 board/ti/omap5_uevm/README

diff --git a/board/ti/omap5_uevm/README b/board/ti/omap5_uevm/README new file mode 100644 index 0000000..970e2ec --- /dev/null +++ b/board/ti/omap5_uevm/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'omap5_uevm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} omap5uevm/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 76c5106..3df502e 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -37,6 +37,7 @@ #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART #define CONFIG_HSMMC2_8BIT +#define CONFIG_SUPPORT_EMMC_BOOT

/* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X

Add a README to the board which lists the commands required to enable booting from the eMMC boot partitions found on the board.

Cc: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: Tom Rini trini@ti.com --- board/ti/dra7xx/README | 25 +++++++++++++++++++++++++ include/configs/dra7xx_evm.h | 2 ++ 2 files changed, 27 insertions(+) create mode 100644 board/ti/dra7xx/README

diff --git a/board/ti/dra7xx/README b/board/ti/dra7xx/README new file mode 100644 index 0000000..2fdaeac --- /dev/null +++ b/board/ti/dra7xx/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'dra7xx_evm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} dra7xx/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} dra7xx/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index f210ed8..3c53f0a 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -73,6 +73,8 @@ #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000

+#define CONFIG_SUPPORT_EMMC_BOOT + /* USB xHCI HOST */ #define CONFIG_CMD_USB #define CONFIG_USB_HOST

Hi Tom,

On Feb 5, 2014, at 5:24 PM, Tom Rini wrote:

We use the switch CONFIG_SUPPORT_EMMC_BOOT today to enable some additional features of the eMMC boot partitions. Add support for being told that we have booted from one of these partitions to the spl framework and implement this on TI OMAP/related.

Cc: Pantelis Antoniou panto@antoniou-consulting.com Signed-off-by: Tom Rini trini@ti.com

---

Changes in v3:

• Rework eMMC boot detect logic for TI platforms, in the eMMC boot case

we rely on non-FAT/RAW values being in bootmode.

arch/arm/cpu/armv7/omap-common/boot-common.c | 13 ++++++++++++- common/spl/spl_mmc.c | 24 ++++++++++++++++++++++++ include/spl.h | 1 + 3 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 69fff32..52e0f4a 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -66,7 +66,18 @@ u32 spl_boot_device(void)

u32 spl_boot_mode(void) {

• return gd->arch.omap_boot_params.omap_bootmode;

• u32 val = gd->arch.omap_boot_params.omap_bootmode;
• if (val == MMCSD_MODE_RAW)

• return MMCSD_MODE_RAW;
  

• else if (val == MMCSD_MODE_FAT)

• return MMCSD_MODE_FAT;
  

• else

+#ifdef CONFIG_SUPPORT_EMMC_BOOT

• return MMCSD_MODE_EMMCBOOT;
  

+#else

• return MMCSD_MODE_UNDEFINED;
  

+#endif }

void spl_board_init(void) diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 13fbff0..fa6f891 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -111,6 +111,30 @@ void spl_mmc_load_image(void) CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION, CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME); #endif +#ifdef CONFIG_SUPPORT_EMMC_BOOT

• } else if (boot_mode == MMCSD_MODE_EMMCBOOT) {

• /*
  

•  * We need to check what the partition is configured to.
  

•  * 1 and 2 match up to boot0 / boot1 and 7 is user data
  

•  * which is the first physical partition (0).
  

•  */
  

• int part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
  

• if (part == 7)
  

• 	part = 0;
  

• if (mmc_switch_part(0, part)) {
  

+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT

• 	puts("MMC partition switch failed\n");
  

+#endif

• 	hang();
  

• }
  

+#ifdef CONFIG_SPL_OS_BOOT

• if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
  

+#endif

• err = mmc_load_image_raw(mmc,
  

• 	CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
  

+#endif } else { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("spl: wrong MMC boot mode\n"); diff --git a/include/spl.h b/include/spl.h index 5e24856..dad00c0 100644 --- a/include/spl.h +++ b/include/spl.h @@ -16,6 +16,7 @@ #define MMCSD_MODE_UNDEFINED 0 #define MMCSD_MODE_RAW 1 #define MMCSD_MODE_FAT 2 +#define MMCSD_MODE_EMMCBOOT 3

struct spl_image_info { const char *name; -- 1.7.9.5

Applied. Thanks.

Signed-off-by: Pantelis Antoniou panto@antoniou-consulting.com