On 28.11.2017 20:12, Jason Brown wrote:

This patch fixes a problem in the mvneta driver where if more than one packet arrives between calls to mvneta_recv(), the additional descriptors will be marked as free even though only one descriptor has been read and processed from the receive queue. This causes the additional packet(s) to be delayed until the next packet arrives. From this point on all packets will be delayed because the receive queue will contain unprocessed packets but the hardware shows no busy descriptors.

Signed-off-by: Jason Brown jason.brown@apcon.com

drivers/net/mvneta.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c index f1be952..83e3153 100644 --- a/drivers/net/mvneta.c +++ b/drivers/net/mvneta.c @@ -1654,7 +1654,11 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp) */ *packetp = data;

• mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
  

• /*
  

•  * Only mark one descriptor as free
  

•  * since only one was processed
  

•  */
  

• mvneta_rxq_desc_num_update(pp, rxq, 1, 1);
  

  }

  return rx_bytes;

Thanks for catching and fixing this issue.

Reviewed-by: Stefan Roese sr@denx.de

Thanks, Stefan