[U-Boot-Users] Flash Configuration in TQM860L?
Dear all:
I want to know the Flash configuration in TQM860L.
Please help me point out the bugs in the following configuration:
Two AM29LV160 chips; A29-A10 (MPC860) is connected to A0-A19 (AM29LV160); CS0# ( MPC860) is connected to CE# (AM29LV160); OE#/GPL_AB1(MPC860) is connected to OE# (AM29LV160); WE0#/BS_B0# (MPC860) is connected to WE#(AM29LV160-chip1); WE2#/BS_B2# (MPC860) is connected to WE#(AM29LV160-chip2); BYTE#(AM29LV160) is set to Vcc; RY/BY#(AM29LV160) is NC??;
Thank you very much!
Yours Sincerely, Yuwei Qin
yuwei_qin@photontec.com 2006-02-20
In message OFEB53E346.19E2BF75-ON4825711B.0004C069@photontec.com you wrote:
I want to know the Flash configuration in TQM860L.
The TQM860L has one or two banks of flash memory; normally the size of eah bank is 4 MiB.
Please help me point out the bugs in the following configuration: Two AM29LV160 chips;
Umm... this has nothing to do with U-Boot, which is software.
Best regards,
Wolfgang Denk
participants (2)
-
??? -
Wolfgang Denk