On 25/11/2016 11:49, Sanchayan Maity wrote:

Our update scripts write the kernel and device tree in seperate UBI volumes. This allows to use a lot less UBI/UBIFS support in U-Boot, which should lower the risk of hitting bugs in this area.

Signed-off-by: Sanchayan Maity maitysanchayan@gmail.com

include/configs/colibri_vf.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index be773a3..4c82fed 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -114,9 +114,9 @@ "ubiboot=run setup; " \ "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ "${setupargs} ${vidargs}; echo Booting from NAND...; " \

• "ubi part ubi && ubifsmount ubi0:rootfs && " \
• "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
• "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \

• "ubi part ubi && " \
• "ubi read ${kernel_addr_r} kernel && " \
• "ubi read ${fdt_addr_r} dtb && " \ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

Applied to u-boot-imx, thanks !

Best regards, Stefano Babic