Dear Kumar Gala,

In message alpine.LFD.2.00.1103140036490.3551@right.am.freescale.net you wrote:

A few fixes for v2011.03 release.

The following changes since commit c7977858dcf1f656cbe91ea0dc3cb9139c6a8cc8:

ARM: Update mach-types (2011-02-21 08:30:55 +0100)

are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master

Ed Swarthout (1): powerpc/85xx: Fix plat_mp_up() disabling of BPTR for CoreNet Platforms

John Schmoller (1): mpc8[5/6]xx: Ensure POST word does not get reset

Kumar Gala (1): fsl_law: Fix LAW printing function

Matthew McClintock (1): powerpc/85xx: Fix pixis_reset altbank mask on MPC8536DS

Priyanka Jain (1): fsl_esdhc: Correcting esdhc timeout counter calculation

York Sun (3): powerpc/mpc8xxx: Fix DDR3 timing_cfg_1 and sdram_mode registers corenet_ds: pick the middle value for all tested timing parameters powerpc/corenet_ds: revise platform dependent parameters

arch/powerpc/cpu/mpc85xx/interrupts.c | 16 ++++++++ arch/powerpc/cpu/mpc85xx/mp.c | 4 +- arch/powerpc/cpu/mpc86xx/interrupts.c | 16 ++++++++ arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 20 +++++++--- board/freescale/corenet_ds/ddr.c | 58 +++++++++-------------------- drivers/misc/fsl_law.c | 2 +- drivers/mmc/fsl_esdhc.c | 16 ++++++++- include/configs/MPC8536DS.h | 2 +- 8 files changed, 83 insertions(+), 51 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk