-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Albert Aribaud Sent: Saturday, November 14, 2009 6:32 AM To: U-Boot@lists.denx.de Subject: [U-Boot] [PATCH] Initial support for Orion5x SoC and EDMini board

This patch adds initial u-boot support for the Marvell orion5x SoC and the LAcie ED Mini V2 board--support is limited to serial, flash and environment. Further support will be added as devices common with kirkwood are made useable across SoCs.

Signed-off-by: Albert Aribaud albert.aribaud@free.fr

Hi Albert

Please break this patch in to small pieces

Makefile | 3 + board/Marvell/edminiv2/Makefile | 51 +++++ board/Marvell/edminiv2/config.mk | 25 +++ board/Marvell/edminiv2/edminiv2.c | 165 ++++++++++++++++ board/Marvell/edminiv2/edminiv2.h | 39 ++++

Pls edit MAKEALL and Maintainers files too for new board support

Arm: add Edminv2 board support (orion5x based)

cpu/arm926ejs/orion5x/Makefile | 52 +++++ cpu/arm926ejs/orion5x/cpu.c | 339 ++++++++++++++++++++++++++++++++ cpu/arm926ejs/orion5x/dram.c | 61 ++++++ cpu/arm926ejs/orion5x/mpp.c | 88 ++++++++ cpu/arm926ejs/orion5x/timer.c | 171 ++++++++++++++++ drivers/serial/serial.c | 3 + include/asm-arm/arch-orion5x/88f5182.h | 40 ++++ include/asm-arm/arch-orion5x/cpu.h | 213 ++++++++++++++++++++ include/asm-arm/arch-orion5x/gpio.h | 53 +++++ include/asm-arm/arch-orion5x/mpp.h | 122 ++++++++++++ include/asm-arm/arch-orion5x/orion5x.h | 67 +++++++

Break this in to basic orion5x Soc support patch And individual drivers patches like gpio, uart, etc..

include/configs/edminiv2.h | 158 +++++++++++++++ 17 files changed, 1650 insertions(+), 0 deletions(-) create mode 100644 board/Marvell/edminiv2/Makefile create mode 100644 board/Marvell/edminiv2/config.mk create mode 100644 board/Marvell/edminiv2/edminiv2.c create mode 100644 board/Marvell/edminiv2/edminiv2.h create mode 100644 cpu/arm926ejs/orion5x/Makefile create mode 100644 cpu/arm926ejs/orion5x/cpu.c create mode 100644 cpu/arm926ejs/orion5x/dram.c create mode 100644 cpu/arm926ejs/orion5x/mpp.c create mode 100644 cpu/arm926ejs/orion5x/timer.c create mode 100644 include/asm-arm/arch-orion5x/88f5182.h create mode 100644 include/asm-arm/arch-orion5x/cpu.h create mode 100644 include/asm-arm/arch-orion5x/gpio.h create mode 100644 include/asm-arm/arch-orion5x/mpp.h create mode 100644 include/asm-arm/arch-orion5x/orion5x.h create mode 100644 include/configs/edminiv2.h

diff --git a/Makefile b/Makefile index bcb3fe9..60f9140 100644 --- a/Makefile +++ b/Makefile @@ -2951,6 +2951,9 @@ davinci_dm365evm_config : unconfig davinci_dm6467evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci

+edminiv2_config: unconfig

• @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=)
  

Marvell orion5x

imx27lite_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27

diff --git a/board/Marvell/edminiv2/Makefile b/board/Marvell/edminiv2/Makefile new file mode 100644 index 0000000..2e6d305 --- /dev/null +++ b/board/Marvell/edminiv2/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar prafulla@marvell.com

This is copy paste mistake, pls correct in all files You can keep my reference, i.e. based on (ref: boards/Marvell/openrd_base/openrd_base.c)

+# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +#

+include $(TOPDIR)/config.mk

+LIB = $(obj)lib$(BOARD).a

+COBJS := edminiv2.o

+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS))

+$(LIB): $(obj).depend $(OBJS) $(SOBJS)

• $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
  

+clean:

• rm -f $(SOBJS) $(OBJS)
  

+distclean: clean

• rm -f $(LIB) core *.bak .depend
  

+############################################################# ############

+# defines $(obj).depend target +include $(SRCTREE)/rules.mk

+sinclude $(obj).depend

+############################################################# ############ diff --git a/board/Marvell/edminiv2/config.mk b/board/Marvell/edminiv2/config.mk new file mode 100644 index 0000000..a4ea769 --- /dev/null +++ b/board/Marvell/edminiv2/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar prafulla@marvell.com

Ditto

+# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +#

+TEXT_BASE = 0x00600000

Is this valid for your board? BTW: how much DRAM you have on this board?

diff --git a/board/Marvell/edminiv2/edminiv2.c b/board/Marvell/edminiv2/edminiv2.c new file mode 100644 index 0000000..f23de0e --- /dev/null +++ b/board/Marvell/edminiv2/edminiv2.c @@ -0,0 +1,165 @@ +/*

• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com

Ditto

• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#include <common.h> +#include <miiphy.h> +#include <asm/arch/orion5x.h> +#include <asm/arch/mpp.h> +#include "edminiv2.h"

+DECLARE_GLOBAL_DATA_PTR;

+#if defined(CONFIG_FLASH_CFI_LEGACY) +#include <flash.h> +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +{

• int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
  

• int sect;
  

• if (base != CONFIG_SYS_FLASH_BASE)
  

•         return 0;
  

• info->size = 0;
  

• info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
  

• for (sect=0; sect<CONFIG_SYS_MAX_FLASH_SECT; sect++) {
  

•         info->start[sect] = base+info->size;
  

•         info->size += sectsz[sect];
  

• }
  

• info->flash_id                  = 0x01000000;
  

• info->portwidth = FLASH_CFI_8BIT;
  

• info->chipwidth = FLASH_CFI_BY8;
  

• info->buffer_size = 32;
  

• info->erase_blk_tout = 16384;
  

• info->write_tout = 2;
  

• info->buffer_write_tout = 5;
  

• info->vendor = CFI_CMDSET_AMD_LEGACY;
  

• info->cmd_reset= 0xF0;
  

• info->interface= FLASH_CFI_X8;
  

• info->legacy_unlock = 0;
  

• info->manufacturer_id = 0xC2;
  

• info->device_id = 0xBA;
  

• info->device_id2= 0;
  

• info->ext_addr = 0;
  

• info->cfi_version = 0x3133;
  

• info->cfi_offset = 0x0000;
  

• info->addr_unlock1 = 0x00000555;
  

• info->addr_unlock2 = 0x000002AA;
  

• info->name = "MX29LV400CB";
  

• return 1;
  

+} +#endif /* CONFIG_SYS_FLASH_CFI */

+int board_init(void) +{

• /*
  

•  * default gpio configuration
  

•  * There are maximum 64 gpios controlled through 2 sets
  

of registers

I don't think there are 64 GPIOs in orion5x

•  * the  below configuration configures mainly initial LED status
  

•  */
  

• orion5x_config_gpio(EDMINIV2_OE_VAL_LOW, EDMINIV2_OE_LOW);
  

You can eliminate LOW here, since mpps less than 32

• /* Multi-Purpose Pins Functionality configuration */
  

• u32 edminiv2_mpp_config[] = {
  

•         MPP0_GPIO,
  

•         MPP1_GPIO,
  

•         MPP2_GPIO,
  

•         MPP3_GPIO,
  

•         MPP4_GPIO,
  

•         MPP5_GPIO,
  

•         MPP6_GPIO,
  

•         MPP7_GPIO,
  

•         MPP8_GPIO,
  

•         MPP9_GPIO,
  

•         MPP10_GPIO,
  

•         MPP11_GPIO,
  

•         MPP12_SATA0_PRESENTn,
  

•         MPP13_SATA1_PRESENTn,
  

•         MPP14_SATA0_ACTn,
  

•         MPP15_SATA1_ACTn,
  

•         MPP16_GPIO,
  

•         MPP17_GPIO,
  

•         MPP18_GPIO,
  

•         MPP19_GPIO,
  

•         0
  

• };
  

• orion5x_mpp_conf(edminiv2_mpp_config);
  

• /*
  

•  * arch number of board
  

•  */
  

• gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2;
  

• /* adress of boot parameters */
  

• gd->bd->bi_boot_params = orion5x_sdram_bar(0) + 0x100;
  

• return 0;
  

+}

+int dram_init(void) +{

• int i;
  

• for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
  

•         gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
  

•         gd->bd->bi_dram[i].size = orion5x_sdram_bs(i);
  

• }
  

• return 0;
  

+}

+#ifdef CONFIG_RESET_PHY_R +/* Configure and enable MV88E1116 PHY */ +void reset_phy(void) +{

• u16 reg;
  

• u16 devadr;
  

• char *name = "egiga0";
  

• if (miiphy_set_current_dev(name))
  

•         return;
  

• /* command to read PHY dev address */
  

• if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
  

•         printf("Err..%s could not read PHY dev address\n",
  

•                 __FUNCTION__);
  

•         return;
  

• }
  

• /*
  

•  * Enable RGMII delay on Tx and Rx for CPU port
  

•  * Ref: sec 4.7.2 of chip datasheet
  

•  */
  

• miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
  

• miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
  

• reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
  

• miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
  

• miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
  

• /* reset the phy */
  

• miiphy_reset(name, devadr);
  

• printf("88E1116 Initialized on %s\n", name);
  

+} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/Marvell/edminiv2/edminiv2.h b/board/Marvell/edminiv2/edminiv2.h new file mode 100644 index 0000000..77a108e --- /dev/null +++ b/board/Marvell/edminiv2/edminiv2.h @@ -0,0 +1,39 @@ +/*

• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com

Ditto

• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#ifndef __EDMINIV2_H +#define __EDMINIV2_H

+#define EDMINIV2_OE_LOW (~(0)) +#define EDMINIV2_OE_VAL_LOW (1 << 29) /* USB_PWEN low */

Pls remove word LOW here

+/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)

+#endif /* __EDMINIV2_H */ diff --git a/cpu/arm926ejs/orion5x/Makefile b/cpu/arm926ejs/orion5x/Makefile new file mode 100644 index 0000000..4b506a7 --- /dev/null +++ b/cpu/arm926ejs/orion5x/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2009 Albert ARIBAUD albrt.aribaud@free.fr +# +# Based on original Kirkwood support which is +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar prafulla@marvell.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +#

+include $(TOPDIR)/config.mk

+LIB = $(obj)lib$(SOC).a

+COBJS-y = dram.o +COBJS-y += cpu.o

Pls put these lines in order

+COBJS-y += mpp.o +COBJS-y += timer.o

+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))

+all: $(obj).depend $(LIB)

+$(LIB): $(OBJS)

• $(AR) $(ARFLAGS) $@ $(OBJS)
  

+############################################################# ############

+# defines $(obj).depend target +include $(SRCTREE)/rules.mk

+sinclude $(obj).depend

+############################################################# ############ diff --git a/cpu/arm926ejs/orion5x/cpu.c b/cpu/arm926ejs/orion5x/cpu.c new file mode 100644 index 0000000..50ca724 --- /dev/null +++ b/cpu/arm926ejs/orion5x/cpu.c @@ -0,0 +1,339 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood support which is
• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#include <common.h> +#include <netdev.h> +#include <asm/cache.h> +#include <u-boot/md5.h> +#include <asm/arch/orion5x.h> +#include <hush.h>

+#define BUFLEN 16

+void reset_cpu(unsigned long ignored) +{

• struct orion5x_cpu_registers *cpureg =
  

•     (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE;
  

• writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
  

•         &cpureg->rstoutn_mask);
  

• writel(readl(&cpureg->sys_soft_rst) | 1,
  

•         &cpureg->sys_soft_rst);
  

• while (1) ;
  

+}

+/*

• • Window Size
• • Used with the Base register to set the address window

size and location.

• • Must be programmed from LSB to MSB as sequence of ones followed by
• • sequence of zeros. The number of ones specifies the size

of the window in

• • 64 KByte granularity (e.g., a value of 0x00FF specifies

256 = 16 MByte).

• • NOTE: A value of 0x0 specifies 64-KByte size.
• */

+unsigned int orion5x_winctrl_calcsize(unsigned int sizeval) +{

• int i;
  

• unsigned int j = 0;
  

• u32 val = sizeval >> 1;
  

• for (i = 0; val > 0x10000; i++) {
  

•         j |= (1 << i);
  

•         val = val >> 1;
  

• }
  

• return (0x0000ffff & j);
  

+}

+/*

• • orion5x_config_adr_windows - Configure address Windows
• • There are 8 address windows supported by Orion5x Soc to

addess different

• • devices. Each window can be configured for size, BAR and

remap addr

• • Below configuration is standard for most of the cases
• • If remap function not used, remap_lo must be set as base
• • Reference Documentation:
• • Mbus-L to Mbus Bridge Registers Configuration.
• • (Sec 25.1 and 25.3 of Datasheet)
• */

+int orion5x_config_adr_windows(void) +{

• struct orion5x_win_registers *winregs =
  

•         (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE;
  

• /* Window 0: PCIE MEM address space */
  

writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_PCIE_MEM, ORION5X_TARGET_PCIE,

•         ORION5X_ATTR_PCIE_MEM, ORION5X_WIN_ENABLE),
  

&winregs[0].ctrl);

• writel(ORION5X_DEFADR_PCIE_MEM, &winregs[0].base);
  

• writel(ORION5X_DEFADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo);
  

• writel(ORION5X_DEFADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi);
  

• /* Window 1: PCIE IO address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_PCIE_IO,
  

ORION5X_TARGET_PCIE,

•         ORION5X_ATTR_PCIE_IO, ORION5X_WIN_ENABLE),
  

&winregs[1].ctrl);

• writel(ORION5X_DEFADR_PCIE_IO, &winregs[1].base);
  

• writel(ORION5X_DEFADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo);
  

• writel(ORION5X_DEFADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi);
  

• /* Window 2: PCI MEM address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_PCI_MEM,
  

ORION5X_TARGET_PCI,

•         ORION5X_ATTR_PCI_MEM, ORION5X_WIN_ENABLE),
  

&winregs[2].ctrl);

• writel(ORION5X_DEFADR_PCI_MEM, &winregs[2].base);
  

• /* Window 3: PCI IO address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_PCI_IO,
  

ORION5X_TARGET_PCI,

•         ORION5X_ATTR_PCI_IO, ORION5X_WIN_ENABLE),
  

&winregs[3].ctrl);

• writel(ORION5X_DEFADR_PCI_IO, &winregs[3].base);
  

• /* Window 4: DEV_CS0 address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_DEV_CS0,
  

ORION5X_TARGET_DEVICE,

•         ORION5X_ATTR_DEV_CS0, ORION5X_WIN_ENABLE),
  

&winregs[4].ctrl);

• writel(ORION5X_DEFADR_DEV_CS0, &winregs[4].base);
  

• /* Window 5: DEV_CS1 address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_DEV_CS1,
  

ORION5X_TARGET_DEVICE,

•         ORION5X_ATTR_DEV_CS1, ORION5X_WIN_ENABLE),
  

&winregs[5].ctrl);

• writel(ORION5X_DEFADR_DEV_CS1, &winregs[5].base);
  

• /* Window 6: DEV_CS2 address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_DEV_CS2,
  

ORION5X_TARGET_DEVICE,

•         ORION5X_ATTR_DEV_CS2, ORION5X_WIN_ENABLE),
  

&winregs[6].ctrl);

• writel(ORION5X_DEFADR_DEV_CS2, &winregs[6].base);
  

• /* Window 7: BOOT Memory address space */
  

• writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_DEFSZ_BOOTROM,
  

ORION5X_TARGET_DEVICE,

•         ORION5X_ATTR_BOOTROM, ORION5X_WIN_ENABLE),
  

&winregs[7].ctrl);

• writel(ORION5X_DEFADR_BOOTROM, &winregs[7].base);
  

• return 0;
  

+}

+/*

• • orion5x_config_gpio - GPIO configuration
• */

+void orion5x_config_gpio(u32 gpp_oe_val, u32 gpp_oe) +{

• struct orion5x_gpio_registers *gpioreg =
  

•         (struct orion5x_gpio_registers *)ORION5X_GPIO_BASE;
  

• /* Init GPIOS to default values as per board requirement */
  

• writel(gpp_oe_val, &gpioreg->dout);
  

• writel(gpp_oe, &gpioreg->oe);
  

+}

+/*

• • orion5x_config_mpp - Multi-Purpose Pins Functionality

configuration

• • Each MPP can be configured to different functionality through
• • MPP control register, ref (sec 6.1 of Orion5x h/w specification)
• • There are maximum 64 Multi-Pourpose Pins on Orion5x

Correct this -64

• • Each MPP functionality can be configuration by a 4bit value
• • of MPP control reg, the value and associated functionality depends
• • upon used SoC varient
• */

+int orion5x_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23) +{

• u32 *mppreg = (u32 *) ORION5X_MPP_BASE;
  

• /* program mpp registers */
  

• writel(mpp0_7, &mppreg[0]);
  

• writel(mpp8_15, &mppreg[1]);
  

• writel(mpp16_23, &mppreg[2]);
  

• return 0;
  

+}

+/* Orion5x identification is done through PCIE space.

• • As long as there is no Orion5x support for PCIE,
• • We'll define the ID and revision PCIE registers
• • here.
• */

+#define PCIE_DEV_ID_OFF (ORION5X_REG_PCIE_BASE + 0x0000) +#define PCIE_DEV_REV_OFF (ORION5X_REG_PCIE_BASE + 0x0008)

Pls move the defination to header file

+u32 orion5x_device_id(void) +{

• return readl(PCIE_DEV_ID_OFF) >> 16;
  

+}

+u32 orion5x_device_rev(void) +{

• return readl(PCIE_DEV_REV_OFF) & 0xff;
  

+}

+#if defined(CONFIG_DISPLAY_CPUINFO)

+int print_cpuinfo(void) +{

• char dev_str[] = "0x0000";
  

• char *dev_name = dev_str;
  

• char rev_str[] = "0x00";
  

• char *rev_name = rev_str;
  

• u32 dev = orion5x_device_id();
  

• u32 rev = orion5x_device_rev();
  

• if (dev == MV88F5181_DEV_ID) {
  

•         dev_name = "MV88F5181";
  

•         if (rev == MV88F5181_REV_B1) {
  

•                 rev_name = "B1";
  

•         } else if (rev == MV88F5181L_REV_A1) {
  

•                 dev_name = "MV88F5181L";
  

•                 rev_name = "A1";
  

•         } else if (rev == MV88F5181L_REV_A0) {
  

•                 dev_name = "MV88F5181L";
  

•                 rev_name = "A0";
  

•         } else {
  

•                 sprintf(rev_str,"0x%02x", rev);
  

•         }
  

• } else if (dev == MV88F5182_DEV_ID) {
  

•         dev_name = "MV88F5182";
  

•         if (rev == MV88F5182_REV_A2) {
  

•                 rev_name = "A2";
  

•         } else {
  

•                 sprintf(rev_str,"0x%02x", rev);
  

•         }
  

• } else if (dev == MV88F5281_DEV_ID) {
  

•         dev_name = "MV88F5281";
  

•         if (rev == MV88F5281_REV_D2) {
  

•                 rev_name = "D2";
  

•         } else if (rev == MV88F5281_REV_D1) {
  

•                 rev_name = "D1";
  

•         } else if (rev == MV88F5281_REV_D0) {
  

•                 rev_name = "D0";
  

•         } else {
  

•                 sprintf(rev_str,"0x%02x", rev);
  

•         }
  

• } else if (dev == MV88F6183_DEV_ID) {
  

•         dev_name = "MV88F6183";
  

•         if (rev == MV88F6183_REV_B0) {
  

•                 rev_name = "B0";
  

•         } else {
  

•                 sprintf(rev_str,"0x%02x", rev);
  

•         }
  

• } else {
  

•         sprintf(dev_str,"0x%04x", rev);
  

•         sprintf(rev_str,"0x%02x", rev);
  

This is common line, pls take out of if-else

• }
  

• printf("SoC:   Orion5x %s-%s\n", dev_name, rev_name);
  

• return 0;
  

+} +#endif /* CONFIG_DISPLAY_CPUINFO */

+#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{

• struct orion5x_cpu_registers *cpureg =
  

•         (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE;
  

• /* Linux expects` the internal registers to be at 0xf1000000 */
  

• writel(ORION5X_REGS_PHY_BASE, ORION5X_OFFSET_REG);
  

• /* Enable and invalidate L2 cache in write through mode */
  

• writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
  

• invalidate_l2_cache();
  

• orion5x_config_adr_windows();
  

+#ifdef CONFIG_ORION5X_RGMII_PAD_1V8

• /*
  

•  * Configures the I/O voltage of the pads connected to Egigabit
  

•  * Ethernet interface to 1.8V
  

•  * By defult it is set to 3.3V
  

•  */
  

• reg = readl(ORION5X_REG_MPP_OUT_DRV_REG);
  

• reg |= (1 << 7);
  

• writel(reg, ORION5X_REG_MPP_OUT_DRV_REG);
  

+#endif +#ifdef CONFIG_ORION5X_EGIGA_INIT

• /*
  

•  * Set egiga port0/1 in normal functional mode
  

•  * This is required becasue on Orion5x by default ports
  

are in reset mode

•  * OS egiga driver may not have provision to set them
  

in normal mode

•  * and if u-boot is build without network support,
  

network may fail at OS level

•  */
  

• reg = readl(ORION5XGBE_PORT_SERIAL_CONTROL1_REG(0));
  

• reg &= ~(1 << 4);       /* Clear PortReset Bit */
  

• writel(reg, (ORION5XGBE_PORT_SERIAL_CONTROL1_REG(0)));
  

• reg = readl(ORION5XGBE_PORT_SERIAL_CONTROL1_REG(1));
  

• reg &= ~(1 << 4);       /* Clear PortReset Bit */
  

• writel(reg, (ORION5XGBE_PORT_SERIAL_CONTROL1_REG(1)));
  

+#endif +#ifdef CONFIG_ORION5X_PCIE_INIT

• /*
  

•  * Enable PCI Express Port0
  

•  */
  

• reg = readl(&cpureg->ctrl_stat);
  

• reg |= (1 << 0);        /* Set PEX0En Bit */
  

• writel(reg, &cpureg->ctrl_stat);
  

+#endif

• return 0;
  

+} +#endif /* CONFIG_ARCH_CPU_INIT */

+/*

• • SOC specific misc init
• */

+#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{

• volatile u32 temp;
  

• /*CPU streaming & write allocate */
  

• temp = readfr_extra_feature_reg();
  

• temp &= ~(1 << 28);     /* disable wr alloc */
  

• writefr_extra_feature_reg(temp);
  

• temp = readfr_extra_feature_reg();
  

• temp &= ~(1 << 29);     /* streaming disabled */
  

• writefr_extra_feature_reg(temp);
  

• /* L2Cache settings */
  

• temp = readfr_extra_feature_reg();
  

• /* Disable L2C pre fetch - Set bit 24 */
  

• temp |= (1 << 24);
  

• /* enable L2C - Set bit 22 */
  

• temp |= (1 << 22);
  

• writefr_extra_feature_reg(temp);
  

• icache_enable();
  

• /* Change reset vector to address 0x0 */
  

• temp = get_cr();
  

• set_cr(temp & ~CR_V);
  

• return 0;
  

+} +#endif /* CONFIG_ARCH_MISC_INIT */

+#ifdef CONFIG_ORION5X_EGIGA +int cpu_eth_init(bd_t *bis) +{

• orion5x_egiga_initialize(bis);
  

• return 0;
  

+} +#endif

Pls do not add this by default, make it a part of egiga driver patch

diff --git a/cpu/arm926ejs/orion5x/dram.c b/cpu/arm926ejs/orion5x/dram.c new file mode 100644 index 0000000..69aec26 --- /dev/null +++ b/cpu/arm926ejs/orion5x/dram.c @@ -0,0 +1,61 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood support which is
• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#include <config.h> +#include <asm/arch/orion5x.h>

+#define ORION5X_REG_CPUCS_WIN_BAR(x) (ORION5X_REGISTER(0x1500) + (x * 0x08)) +#define ORION5X_REG_CPUCS_WIN_SZ(x) (ORION5X_REGISTER(0x1504) + (x * 0x08)) +/*

• • orion5x_sdram_bar - reads SDRAM Base Address Register
• */

+u32 orion5x_sdram_bar(enum memory_bank bank) +{

• u32 result = 0;
  

• u32 enable = 0x01 & readl(ORION5X_REG_CPUCS_WIN_SZ(bank));
  

• if ((!enable) || (bank > BANK3))
  

•         return 0;
  

• result = readl(ORION5X_REG_CPUCS_WIN_BAR(bank));
  

• return result;
  

+}

+/*

• • orion5x_sdram_bs - reads SDRAM Bank size
• */

+u32 orion5x_sdram_bs(enum memory_bank bank) +{

• u32 result = 0;
  

• u32 enable = 0x01 & readl(ORION5X_REG_CPUCS_WIN_SZ(bank));
  

• if ((!enable) || (bank > BANK3))
  

•         return 0;
  

• result = 0xff000000 & readl(ORION5X_REG_CPUCS_WIN_SZ(bank));
  

• result += 0x01000000;
  

• return result;
  

+} diff --git a/cpu/arm926ejs/orion5x/mpp.c b/cpu/arm926ejs/orion5x/mpp.c new file mode 100644 index 0000000..1b1e7fa --- /dev/null +++ b/cpu/arm926ejs/orion5x/mpp.c @@ -0,0 +1,88 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood support
• • arch/arm/mach-orion5x/mpp.c
• • MPP functions for Marvell Kirorion5xood SoCs
• • Referenced from Linux kernel source
• • This file is licensed under the terms of the GNU General Public
• • License version 2. This program is licensed "as is" without any
• • warranty of any kind, whether express or implied.
• */

+#include <common.h> +#include <asm/arch/orion5x.h> +#include <asm/arch/mpp.h>

+static u32 orion5x_variant(void) +{

•    switch (orion5x_device_id()) {
  

•         case MV88F5181_DEV_ID:
  

•                 return 0;
  

•         case MV88F5182_DEV_ID:
  

•                 return MPP_F5182_MASK;
  

•         case MV88F5281_DEV_ID:
  

•                 return MPP_F5281_MASK;
  

•         case MV88F6183_DEV_ID:
  

•                 return 0;
  

•         default:
  

•                 debug("MPP setup: unknown Orion5x variant\n");
  

•                 return 0;
  

• }
  

+}

+#define MPP_CTRL(i) (ORION5X_MPP_BASE + (i* 4)) +#define MPP_NR_REGS (1 + MPP_MAX/8)

+void orion5x_mpp_conf(u32 *mpp_list) +{

• u32 mpp_ctrl[MPP_NR_REGS];
  

• unsigned int variant_mask;
  

• int i;
  

• variant_mask = orion5x_variant();
  

• if (!variant_mask)
  

•         return;
  

• debug( "initial MPP regs:");
  

• for (i = 0; i < MPP_NR_REGS; i++) {
  

•         mpp_ctrl[i] = readl(MPP_CTRL(i));
  

•         debug(" %08x", mpp_ctrl[i]);
  

• }
  

• debug("\n");
  

• while (*mpp_list) {
  

•         unsigned int num = MPP_NUM(*mpp_list);
  

•         unsigned int sel = MPP_SEL(*mpp_list);
  

•         int shift;
  

•         if (num > MPP_MAX) {
  

•                 debug("orion5x_mpp_conf: invalid MPP "
  

•                                 "number (%u)\n", num);
  

•                 continue;
  

•         }
  

•         if (!(*mpp_list & variant_mask)) {
  

•                 debug("orion5x_mpp_conf: requested
  

MPP%u config "

•                         "unavailable on this hardware\n", num);
  

•                 continue;
  

•         }
  

•         shift = (num & 7) << 2;
  

•         mpp_ctrl[num / 8] &= ~(0xf << shift);
  

•         mpp_ctrl[num / 8] |= sel << shift;
  

•         mpp_list++;
  

• }
  

• debug("  final MPP regs:");
  

• for (i = 0; i < MPP_NR_REGS; i++) {
  

•         writel(mpp_ctrl[i], MPP_CTRL(i));
  

•         debug(" %08x", mpp_ctrl[i]);
  

• }
  

• debug("\n");
  

+} diff --git a/cpu/arm926ejs/orion5x/timer.c b/cpu/arm926ejs/orion5x/timer.c new file mode 100644 index 0000000..80fee75 --- /dev/null +++ b/cpu/arm926ejs/orion5x/timer.c @@ -0,0 +1,171 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood support which is
• • Copyright (C) Marvell International Ltd. and its affiliates
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#include <common.h> +#include <asm/arch/orion5x.h>

+#define UBOOT_CNTR 0 /* counter to use for uboot timer */

+/* Timer reload and current value registers */ +struct orion5x_tmr_val {

• u32 reload;     /* Timer reload reg */
  

• u32 val;        /* Timer value reg */
  

+};

+/* Timer registers */ +struct orion5x_tmr_registers {

• u32 ctrl;       /* Timer control reg */
  

• u32 pad[3];
  

• struct orion5x_tmr_val tmr[2];
  

• u32 wdt_reload;
  

• u32 wdt_val;
  

+};

+struct orion5x_tmr_registers *orion5x_tmr_regs = (struct orion5x_tmr_registers *)ORION5X_TIMER_BASE;

+/*

• • ARM Timers Registers Map
• */

+#define CNTMR_CTRL_REG &orion5x_tmr_regs->ctrl +#define CNTMR_RELOAD_REG(tmrnum) &orion5x_tmr_regs->tmr[tmrnum].reload +#define CNTMR_VAL_REG(tmrnum) &orion5x_tmr_regs->tmr[tmrnum].val

+/*

• • ARM Timers Control Register
• • CPU_TIMERS_CTRL_REG (CTCR)
• */

+#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) +#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) +#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) +#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))

+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) +#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1) +#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) +#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))

+/*

• • ARM Timer\Watchdog Reload Register
• • CNTMR_RELOAD_REG (TRR)
• */

+#define TRG_ARM_TIMER_REL_OFFS 0 +#define TRG_ARM_TIMER_REL_MASK 0xffffffff

+/*

• • ARM Timer\Watchdog Register
• • CNTMR_VAL_REG (TVRG)
• */

+#define TVR_ARM_TIMER_OFFS 0 +#define TVR_ARM_TIMER_MASK 0xffffffff +#define TVR_ARM_TIMER_MAX 0xffffffff +#define TIMER_LOAD_VAL 0xffffffff

+#define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \

•                                  (CONFIG_SYS_TCLK / 1000))
  

+static ulong timestamp; +static ulong lastdec;

+void reset_timer_masked(void) +{

• /* reset time */
  

• lastdec = READ_TIMER;
  

• timestamp = 0;
  

+}

+ulong get_timer_masked(void) +{

• ulong now = READ_TIMER;
  

• if (lastdec >= now) {
  

•         /* normal mode */
  

•         timestamp += lastdec - now;
  

• } else {
  

•         /* we have an overflow ... */
  

•         timestamp += lastdec +
  

•                 (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK /
  

1000)) - now;

• }
  

• lastdec = now;
  

• return timestamp;
  

+}

+void reset_timer(void) +{

• reset_timer_masked();
  

+}

+ulong get_timer(ulong base) +{

• return get_timer_masked() - base;
  

+}

+void set_timer(ulong t) +{

• timestamp = t;
  

+}

+void udelay(unsigned long usec) +{

• uint current;
  

• ulong delayticks;
  

• current = readl(CNTMR_VAL_REG(UBOOT_CNTR));
  

• delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
  

• if (current < delayticks) {
  

•         delayticks -= current;
  

•         while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) < current) ;
  

•         while ((TIMER_LOAD_VAL - delayticks) <
  

•                 readl(CNTMR_VAL_REG(UBOOT_CNTR))) ;
  

• } else {
  

•         while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) >
  

•                 (current - delayticks)) ;
  

• }
  

+}

+/*

• • init the counter
• */

+int timer_init(void) +{

• unsigned int cntmrctrl;
  

• /* load value into timer */
  

• writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
  

• writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
  

• /* enable timer in auto reload mode */
  

• cntmrctrl = readl(CNTMR_CTRL_REG);
  

• cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
  

• cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
  

• writel(cntmrctrl, CNTMR_CTRL_REG);
  

• /* init the timestamp and lastdec value */
  

• reset_timer_masked();
  

• return 0;
  

+} diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index dd5f332..18686a2 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -30,6 +30,9 @@ #ifdef CONFIG_KIRKWOOD #include <asm/arch/kirkwood.h> #endif +#ifdef CONFIG_ORION5X +#include <asm/arch/orion5x.h> +#endif

#if defined (CONFIG_SERIAL_MULTI) #include <serial.h> diff --git a/include/asm-arm/arch-orion5x/88f5182.h b/include/asm-arm/arch-orion5x/88f5182.h new file mode 100644 index 0000000..1dfdb24 --- /dev/null +++ b/include/asm-arm/arch-orion5x/88f5182.h @@ -0,0 +1,40 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood 88F6182 support which is
• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • Header file for Feroceon CPU core 88F5182 SOC.
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#ifndef _CONFIG_88F5182_H +#define _CONFIG_88F5182_H

+/* SOC specific definations */ +#define F88F5182_REGS_PHYS_BASE 0xf1000000 +#define ORION5X_REGS_PHY_BASE F88F5182_REGS_PHYS_BASE

+/* TCLK Core Clock defination */ +#define CONFIG_SYS_TCLK 166000000 /* 166MHz */

+#endif /* _CONFIG_88F5182_H */ diff --git a/include/asm-arm/arch-orion5x/cpu.h b/include/asm-arm/arch-orion5x/cpu.h new file mode 100644 index 0000000..7078d2e --- /dev/null +++ b/include/asm-arm/arch-orion5x/cpu.h @@ -0,0 +1,213 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirorion5x_ood support which is
• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#ifndef _ORION5X_CPU_H +#define _ORION5X_CPU_H

+#include <asm/system.h>

+#ifndef __ASSEMBLY__

+#define ORION5X_CPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \

•                 | (attr << 8) |
  

(orion5x_winctrl_calcsize(size) << 16))

+#define ORION5XGBE_PORT_SERIAL_CONTROL1_REG(_x) \

•         ((_x ? ORION5X_EGIGA0_BASE :
  

ORION5X_EGIGA1_BASE) + 0x44c)

+#define ORION5X_REG_DEVICE_ID (ORION5X_MPP_BASE + 0x34) +#define ORION5X_REG_SYSRST_CNT (ORION5X_MPP_BASE + 0x50) +#define SYSRST_CNT_1SEC_VAL (25*1000000) +#define ORION5X_REG_MPP_OUT_DRV_REG (ORION5X_MPP_BASE + 0xE0)

+enum memory_bank {

• BANK0,
  

• BANK1,
  

• BANK2,
  

• BANK3
  

+};

+enum orion5x_cpu_winen {

• ORION5X_WIN_DISABLE,
  

• ORION5X_WIN_ENABLE
  

+};

+enum orion5x_cpu_target {

• ORION5X_TARGET_DRAM = 0,
  

• ORION5X_TARGET_DEVICE = 1,
  

• ORION5X_TARGET_PCI = 3,
  

• ORION5X_TARGET_PCIE = 4,
  

• ORION5X_TARGET_SASRAM = 9
  

+};

+enum orion5x_cpu_attrib {

• ORION5X_ATTR_DRAM_CS0 = 0x0e,
  

• ORION5X_ATTR_DRAM_CS1 = 0x0d,
  

• ORION5X_ATTR_DRAM_CS2 = 0x0b,
  

• ORION5X_ATTR_DRAM_CS3 = 0x07,
  

• ORION5X_ATTR_PCI_MEM = 0x59,
  

• ORION5X_ATTR_PCI_IO = 0x51,
  

• ORION5X_ATTR_PCIE_MEM = 0x59,
  

• ORION5X_ATTR_PCIE_IO = 0x51,
  

• ORION5X_ATTR_SASRAM = 0x00,
  

• ORION5X_ATTR_DEV_CS0 = 0x1e,
  

• ORION5X_ATTR_DEV_CS1 = 0x1d,
  

• ORION5X_ATTR_DEV_CS2 = 0x1b,
  

• ORION5X_ATTR_BOOTROM = 0x0f
  

+};

+/*

• • Default Device Address MAP BAR values
• */

+#define ORION5X_DEFADR_PCIE_MEM 0x90000000 +#define ORION5X_DEFADR_PCIE_MEM_REMAP_LO 0x90000000 +#define ORION5X_DEFADR_PCIE_MEM_REMAP_HI 0 +#define ORION5X_DEFSZ_PCIE_MEM (128*1024*1024)

+#define ORION5X_DEFADR_PCIE_IO 0xf0000000 +#define ORION5X_DEFADR_PCIE_IO_REMAP_LO 0x90000000 +#define ORION5X_DEFADR_PCIE_IO_REMAP_HI 0 +#define ORION5X_DEFSZ_PCIE_IO (64*1024)

+#define ORION5X_DEFADR_PCI_MEM 0x98000000 +#define ORION5X_DEFSZ_PCI_MEM (128*1024*1024)

+#define ORION5X_DEFADR_PCI_IO 0xf0100000 +#define ORION5X_DEFSZ_PCI_IO (64*1024)

+#define ORION5X_DEFADR_DEV_CS0 0xfa000000 +#define ORION5X_DEFSZ_DEV_CS0 (2*1024*1024)

+#define ORION5X_DEFADR_DEV_CS1 0xf8000000 +#define ORION5X_DEFSZ_DEV_CS1 (32*1024*1024)

+#define ORION5X_DEFADR_DEV_CS2 0xfa800000 +#define ORION5X_DEFSZ_DEV_CS2 (1*1024*1024)

+#define ORION5X_DEFADR_BOOTROM 0xFFF80000 +#define ORION5X_DEFSZ_BOOTROM (512*1024)

+/* Constants for known devices and revisions

• */

+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 +/* Orion-1-90 (88F6183) */ +#define MV88F6183_DEV_ID 0x6183 +#define MV88F6183_REV_B0 3

+/*

• • read feroceon/sheeva core extra feature register

Pls remove name sheeva

• • using co-proc instruction
• */

+static inline unsigned int readfr_extra_feature_reg(void) +{

• unsigned int val;
  

• asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr":"=r"
  

•                 (val)::"cc");
  

• return val;
  

+}

+/*

• • write feroceon/sheeva core extra feature register

Same

• • using co-proc instruction
• */

+static inline void writefr_extra_feature_reg(unsigned int val) +{

• asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr"::"r"
  

•                 (val):"cc");
  

• isb();
  

+}

+/*

• • MBus-L to Mbus Bridge Registers
• • Ref: Datasheet sec:A.3

Are those references correct?

• */

+struct orion5x_win_registers {

• u32 ctrl;
  

• u32 base;
  

• u32 remap_lo;
  

• u32 remap_hi;
  

+};

+/*

• • CPU control and status Registers
• • Ref: Datasheet sec:A.3.2

Are those references correct?

• */

+struct orion5x_cpu_registers {

• u32 config;     /*0x20100 */
  

• u32 ctrl_stat;  /*0x20104 */
  

• u32 rstoutn_mask; /* 0x20108 */
  

• u32 sys_soft_rst; /* 0x2010C */
  

• u32 ahb_mbus_cause_irq; /* 0x20110 */
  

• u32 ahb_mbus_mask_irq; /* 0x20114 */
  

• u32 pad1[2];
  

• u32 ftdll_config; /* 0x20120 */
  

• u32 pad2;
  

• u32 l2_cfg;     /* 0x20128 */
  

+};

+/*

• • GPIO Registers
• • Ref: Datasheet sec:A.19

Are those references correct?

• */

+struct orion5x_gpio_registers {

• u32 dout;
  

• u32 oe;
  

• u32 blink_en;
  

• u32 din_pol;
  

• u32 din;
  

• u32 irq_cause;
  

• u32 irq_mask;
  

• u32 irq_level;
  

+};

+/*

• • functions
• */

+void reset_cpu(unsigned long ignored); +u32 orion5x_device_id(void); +u32 orion5x_device_rev(void); +unsigned int orion5x_sdram_bar(enum memory_bank bank); +unsigned int orion5x_sdram_bs(enum memory_bank bank); +int orion5x_config_adr_windows(void); +void orion5x_config_gpio(unsigned int gpp_oe_val, unsigned int gpp_oe); +int orion5x_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15, unsigned int mpp16_23); +unsigned int orion5x_winctrl_calcsize(unsigned int sizeval); +#endif /* __ASSEMBLY__ */ +#endif /* _ORION5X_CPU_H */ diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h new file mode 100644 index 0000000..40fe2e0 --- /dev/null +++ b/include/asm-arm/arch-orion5x/gpio.h @@ -0,0 +1,53 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on arch/asm-arm/mach-kirkwood/include/mach/gpio.h
• • This file is licensed under the terms of the GNU General Public
• • License version 2. This program is licensed "as is" without any
• • warranty of any kind, whether express or implied.
• */

+/*

• • Based on (mostly copied from) plat-orion based Linux 2.6

kernel driver.

• • Removed kernel level irq handling. Took some macros from kernel to
• • allow build.
• • Dieter Kiermaier dk-arm-linux@gmx.de
• */

+#ifndef __ORION5X_GPIO_H +#define __ORION5X_GPIO_H

+/* got from kernel include/linux/bitops.h */ +#define BITS_PER_BYTE 8 +#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE

• sizeof(long))

+#define GPIO_MAX 50

Is this correct defination for Orion?

+#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000) +#define GPIO_OUT(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x00) +#define GPIO_IO_CONF(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x04) +#define GPIO_BLINK_EN(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x08) +#define GPIO_IN_POL(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x0c) +#define GPIO_DATA_IN(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x10) +#define GPIO_EDGE_CAUSE(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x14) +#define GPIO_EDGE_MASK(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x18) +#define GPIO_LEVEL_MASK(pin) (ORION5X_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)

+/*

• • Kirorion5xood-specific GPIO API

Copy paste error

• */

+void orion5x_gpio_set_valid(unsigned pin, int mode); +int orion5x_gpio_is_valid(unsigned pin, int mode); +int orion5x_gpio_direction_input(unsigned pin); +int orion5x_gpio_direction_output(unsigned pin, int value); +int orion5x_gpio_get_value(unsigned pin); +void orion5x_gpio_set_value(unsigned pin, int value); +void orion5x_gpio_set_blink(unsigned pin, int blink); +void orion5x_gpio_set_unused(unsigned pin);

+#define GPIO_INPUT_OK (1 << 0) +#define GPIO_OUTPUT_OK (1 << 1)

+#endif diff --git a/include/asm-arm/arch-orion5x/mpp.h b/include/asm-arm/arch-orion5x/mpp.h new file mode 100644 index 0000000..a03eb8e --- /dev/null +++ b/include/asm-arm/arch-orion5x/mpp.h @@ -0,0 +1,122 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood support which is
• • Copyright 2009: Marvell Technology Group Ltd.
• • This file is licensed under the terms of the GNU General Public
• • License version 2. This program is licensed "as is" without any
• • warranty of any kind, whether express or implied.
• */

+#ifndef __ORION5X_MPP_H +#define __ORION5X_MPP_H

+#define MPP(_num, _sel, _in, _out, _F5182, _F5281) ( \

• /* MPP number */                ((_num) & 0xff) | \
  

• /* MPP select value */          (((_sel) & 0xf) << 8) | \
  

• /* may be input signal */       ((!!(_in)) << 12) | \
  

• /* may be output signal */      ((!!(_out)) << 13) | \
  

• /* available on F5182 */        ((!!(_F5182)) << 14) | \
  

• /* available on F5281 */        ((!!(_F5182)) << 15))
  

+#define MPP_NUM(x) ((x) & 0xff) +#define MPP_SEL(x) (((x) >> 8) & 0xf)

•                                 /*   num sel  i  o  5182 5281 */
  

+#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0 ) +#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0 )

+#define MPP_F5182_MASK MPP( 0, 0x0, 0, 0, 1, 0 ) +#define MPP_F5281_MASK MPP( 0, 0x0, 0, 0, 0, 1 )

+#define MPP0_PEX_RST_OUTn MPP( 0, 0x0, 0, 1, 1, 1 ) +#define MPP0_PCI_REQ2n MPP( 0, 0x2, 1, 0, 1, 1 ) +#define MPP0_GPIO MPP( 0, 0x3, 1, 1, 1, 1 )

+#define MPP1_GPIO MPP( 1, 0x0, 1, 1, 1, 1 ) +#define MPP1_PCI_GNT2n MPP( 1, 0x2, 0, 1, 1, 1 )

+#define MPP2_GPIO MPP( 2, 0x0, 1, 1, 1, 1 ) +#define MPP2_PCI_REQ3n MPP( 2, 0x2, 1, 0, 1, 1 ) +#define MPP2_PMEn MPP( 2, 0x3, 0, 1, 1, 1 )

+#define MPP3_GPIO MPP( 3, 0x0, 1, 1, 1, 1 ) +#define MPP3_PCI_GNT3nO MPP( 3, 0x2, 0, 1, 1, 1 )

+#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1 ) +#define MPP4_PCI_REQ4n MPP( 4, 0x2, 1, 0, 1, 1 ) +#define MPP4_BOOT_NAND_FLASH_REn MPP( 4, 0x4, 0, 0, 1, 1 ) +#define MPP4_SATA0_PRESENTn MPP( 4, 0x5, 0, 1, 1, 0 )

+#define MPP5_GPIO MPP( 5, 0x0, 1, 1, 1, 1 ) +#define MPP5_PCI_GNT4n MPP( 5, 0x2, 0, 1, 1, 1 ) +#define MPP5_BOOT_NAND_FLASH_WEn MPP( 5, 0x4, 0, 0, 1, 1 ) +#define MPP5_SATA1_PRESENTn MPP( 5, 0x5, 0, 1, 1, 0 )

+#define MPP6_GPIO MPP( 6, 0x0, 1, 1, 1, 1 ) +#define MPP6_PCI_REQ5n MPP( 6, 0x2, 1, 0, 1, 1 ) +#define MPP6_NAND_FLASH_RE0n MPP( 6, 0x4, 0, 0, 1, 1 ) +#define MPP6_SATA0_ACTn MPP( 6, 0x5, 0, 1, 1, 0 )

+#define MPP7_GPIO MPP( 7, 0x0, 1, 1, 1, 1 ) +#define MPP7_PCI_GNT5n MPP( 7, 0x2, 0, 1, 1, 1 ) +#define MPP7_NAND_FLASH_WE0n MPP( 7, 0x4, 0, 0, 1, 1 ) +#define MPP7_SATA1_ACTn MPP( 7, 0x5, 0, 1, 1, 0 )

+#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1 ) +#define MPP8_GE_COL MPP( 8, 0x1, 1, 0, 1, 1 )

+#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1 ) +#define MPP9_GE_RXERR MPP( 9, 0x1, 1, 0, 1, 1 )

+#define MPP10_GPIO MPP( 10, 0x0, 1, 1, 1, 1 ) +#define MPP10_GE_CRS MPP( 10, 0x1, 1, 0, 1, 1 )

+#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1 ) +#define MPP11_GE_TXERR MPP( 11, 0x1, 0, 1, 1, 1 )

+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1 ) +#define MPP12_GE_TXD4 MPP( 12, 0x1, 0, 1, 1, 1 ) +#define MPP12_NAND_FLASH_RE1n MPP( 12, 0x4, 1, 1, 1, 1 ) +#define MPP12_SATA0_PRESENTn MPP( 12, 0x5, 0, 1, 1, 0 )

+#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1 ) +#define MPP13_GE_TXD5 MPP( 13, 0x1, 0, 1, 1, 1 ) +#define MPP13_NAND_FLASH_WE1n MPP( 13, 0x4, 0, 1, 1, 1 ) +#define MPP13_SATA1_PRESENTn MPP( 13, 0x5, 0, 1, 1, 0 )

+#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1 ) +#define MPP14_GE_TXD6 MPP( 14, 0x1, 0, 1, 1, 1 ) +#define MPP14_NAND_FLASH_RE2n MPP( 14, 0x4, 1, 1, 1, 1 ) +#define MPP14_SATA0_ACTn MPP( 14, 0x5, 0, 1, 1, 0 )

+#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1 ) +#define MPP15_GE_TXD7 MPP( 15, 0x1, 0, 1, 1, 1 ) +#define MPP15_NAND_FLASH_WE2n MPP( 15, 0x4, 0, 1, 1, 1 ) +#define MPP15_SATA1_ACTn MPP( 15, 0x5, 0, 1, 1, 0 )

+#define MPP16_UART1_RXD MPP( 16, 0x0, 1, 0, 1, 1 ) +#define MPP16_GE_RXD4 MPP( 16, 0x1, 1, 0, 1, 1 ) +#define MPP16_BOOT_NAND_FLASH_REn MPP( 16, 0x4, 0, 0, 1, 1 ) +#define MPP16_GPIO MPP( 16, 0x5, 1, 1, 1, 0 )

+#define MPP17_UART1_TXD MPP( 17, 0x0, 0, 1, 1, 1 ) +#define MPP17_GE_RXD5 MPP( 17, 0x1, 1, 0, 1, 1 ) +#define MPP17_BOOT_NAND_FLASH_WEn MPP( 17, 0x4, 0, 0, 1, 1 ) +#define MPP17_GPIO MPP( 17, 0x5, 1, 1, 1, 0 )

+#define MPP18_UART1_CTSn MPP( 18, 0x0, 1, 0, 1, 1 ) +#define MPP18_GE_RXD6 MPP( 18, 0x1, 1, 0, 1, 1 ) +#define MPP18_GPIO MPP( 18, 0x5, 1, 1, 1, 0 )

+#define MPP19_UART1_RTSn MPP( 19, 0x0, 0, 1, 1, 1 ) +#define MPP19_GE_RXD7 MPP( 19, 0x1, 1, 0, 1, 1 ) +#define MPP19_GPIO MPP( 19, 0x5, 1, 1, 1, 0 )

+#define MPP_MAX 19

+void orion5x_mpp_conf(unsigned int *mpp_list);

+#endif diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h new file mode 100644 index 0000000..76cb927 --- /dev/null +++ b/include/asm-arm/arch-orion5x/orion5x.h @@ -0,0 +1,67 @@ +/*

• • Copyright (C) 2009 Albert ARIBAUD albert.aribaud@free.fr
• • Based on original Kirkwood support which is
• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • Header file for Marvell's Orion SoC with Feroceon CPU core.
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#ifndef _ASM_ARCH_ORION5X_H +#define _ASM_ARCH_ORION5X_H

+#ifndef __ASSEMBLY__ +#include <asm/types.h> +#include <asm/io.h> +#endif /* __ASSEMBLY__ */

+#if defined (CONFIG_FEROCEON) +#include <asm/arch/cpu.h>

+/* SOC specific definations */ +#define INTREG_BASE 0xd0000000 +#define ORION5X_REGISTER(x) (ORION5X_REGS_PHY_BASE + x) +#define ORION5X_OFFSET_REG (INTREG_BASE + 0x20080)

+/* Documented registers */ +#define ORION5X_TWSI_BASE (ORION5X_REGISTER(0x11000)) +#define ORION5X_UART0_BASE (ORION5X_REGISTER(0x12000)) +#define ORION5X_UART1_BASE (ORION5X_REGISTER(0x12100)) +#define ORION5X_MPP_BASE (ORION5X_REGISTER(0x10000)) +#define ORION5X_GPIO_BASE (ORION5X_REGISTER(0x10100)) +#define ORION5X_CPU_WIN_BASE (ORION5X_REGISTER(0x20000)) +#define ORION5X_CPU_REG_BASE (ORION5X_REGISTER(0x20100)) +#define ORION5X_TIMER_BASE (ORION5X_REGISTER(0x20300)) +#define ORION5X_REG_PCI_BASE (ORION5X_REGISTER(0x30000)) +#define ORION5X_REG_PCIE_BASE (ORION5X_REGISTER(0x40000)) +#define ORION5X_USB20_PORT0_BASE (ORION5X_REGISTER(0x50000)) +#define ORION5X_USB20_PORT1_BASE (ORION5X_REGISTER(0xA0000)) +#define ORION5X_EGIGA_BASE (ORION5X_REGISTER(0x72000))

I hope these are inlined with orion5x and not the result of copy-paste, pls check this carefully

+#if defined (CONFIG_88F5182) +#include <asm/arch/88f5182.h> +#else +#error "SOC Name not defined" +#endif +#endif /* CONFIG_FEROCEON */ +#endif /* _ASM_ARCH_ORION5X_H */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h new file mode 100644 index 0000000..a8036dd --- /dev/null +++ b/include/configs/edminiv2.h @@ -0,0 +1,158 @@ +/*

• • (C) Copyright 2009
• • Marvell Semiconductor <www.marvell.com>
• • Written-by: Prafulla Wadaskar prafulla@marvell.com
• • See file CREDITS for list of people who contributed to this
• • project.
• • This program is free software; you can redistribute it and/or
• • modify it under the terms of the GNU General Public License as
• • published by the Free Software Foundation; either version 2 of
• • the License, or (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• • You should have received a copy of the GNU General Public License
• • along with this program; if not, write to the Free Software
• • Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
• • MA 02110-1301 USA
• */

+#ifndef _CONFIG_EDMINIV2_H +#define _CONFIG_EDMINIV2_H

+/*

• • Version number information
• */

+#define CONFIG_IDENT_STRING " Lacie ED Mini V2"

Short board name will be prefered

+/*

• • High Level Configuration Options (easy to change)
• */

+#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_FEROCEON 1 /* CPU Core subversion */ +#define CONFIG_ORION5X 1 /* SOC Family Name */ +#define CONFIG_88F5182 1 /* SOC Name */ +#define CONFIG_MACH_EDMINIV2 1 /* Machine type */

+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */

+/*

• • CLKs configurations
• */

+#define CONFIG_SYS_HZ 1000

+/*

• • NS16550 Configuration
• */

+#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 ORION5X_UART0_BASE

+/*

• • Serial Port configuration
• • The following definitions let you select what serial you

want to use

• • for your console driver.
• */

+#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \

•                                   115200,230400,
  

460800, 921600 } +/*

• • FLASH configuration
• */

+#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CONFIG_FLASH_CFI_LEGACY

+//#define CONFIG_SYS_FLASH_LEGACY_512Kx8 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_BASE 0xfff80000 +#define CONFIG_SYS_FLASH_SECTSZ {16384,8192,8192,32768,65536,65536,65536,65536,65536,65536,65536}

+/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */

+/*

• • For booting Linux, the board info and command line data
• • have to be in the first 8 MB of memory, since this is
• • the maximum mapped by the Linux kernel during initialization.
• */

+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */

+#define CONFIG_SYS_PROMPT "Marvell>> " /*

Is this Marvell custom board ? If not, even you can choose to keep in in boards instead of boards/Marvell/

Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \

•         +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
  

+/*

• • Commands configuration
• */

+/*

• • Disabling many default commands for staggered bring-up
• */

+#if 0

This is not allowed, pls remove it, or use some defination here I suggest to use config_cmd_default.h folloed by def/undefs for required commands to inline with other arm boards configuration

+#include <config_cmd_default.h> +#else +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_ECHO /* echo arguments */ +#define CONFIG_CMD_EDITENV /* editenv */ +#define CONFIG_CMD_IMI /* iminfo */ +#define CONFIG_CMD_ITEST /* Integer (and string) test */ +#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#define CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ +#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#endif +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_ENV

+/*

• • Environment variables configurations
• */

+#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x2000 /* 16K */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x4000 /* env starts here */

+/*

• • Size of malloc() pool
• */

+#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128

+/*

• • Other required minimal configurations
• */

+#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */

+#endif /* _CONFIG_EDMINIV2_H */

1.6.4.4

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot