Add tests for booting image using tftpboot/pxe boot commands, tftpboot boot case loads the FIT image into DDR and boots using bootm command whereas pxe boot cases downloads the pxe configuration file from the TFTP server and interprets it to boot the images mentioned in the pxe configurations file. This test relies on boardenv_* containing configuration values including the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the boot log pattern value is matched. For example, if the parameter 'pattern' is defined as 'login:', it will boot till login prompt.

Signed-off-by: Love Kumar love.kumar@amd.com --- Changes in v2: - Expand commit message Changes in v3: - Add the config option to skip the test - Remove imi command to check FIT image config - Configure static networking only if DHCP fails Changes in v4: - Use configured timeout for tftpboot Changes in v5: - Add pre-req for boot test to enable error check - Merged boot and boot config test Changes in v6: - Use common setup_networking function for tftp and pxe cases - Check for bootfile env variable for pxe config name Changes in v7: - Set pxefile_addr_r env variable to use the same address for loading and running pxe config --- test/py/tests/test_net_boot.py | 403 +++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 test/py/tests/test_net_boot.py

diff --git a/test/py/tests/test_net_boot.py b/test/py/tests/test_net_boot.py new file mode 100644 index 000000000000..4729ccf07feb --- /dev/null +++ b/test/py/tests/test_net_boot.py @@ -0,0 +1,403 @@ +# SPDX-License-Identifier: GPL-2.0 +# (C) Copyright 2023, Advanced Micro Devices, Inc. + +import pytest +import u_boot_utils +import test_net +import re + +""" +Note: This test relies on boardenv_* containing configuration values to define +which the network environment available for testing. Without this, this test +will be automatically skipped. + +For example: + +# Details regarding a boot image file that may be read from a TFTP server. This +# variable may be omitted or set to None if TFTP boot testing is not possible +# or desired. +env__net_tftp_bootable_file = { + 'fn': 'image.ub', + 'addr': 0x10000000, + 'size': 5058624, + 'crc32': 'c2244b26', + 'pattern': 'Linux', + 'config': 'config@2', + 'timeout': 50000, + 'check_type': 'boot_error', + 'check_pattern': 'ERROR', +} + +# False or omitted if a TFTP boot test should be tested. +# If TFTP boot testing is not possible or desired, set this variable to True. +# For example: If FIT image is not proper to boot +env__tftp_boot_test_skip = False + +# Here is the example of FIT image configurations: +configurations { + default = "config@1"; + config@1 { + description = "Boot Linux kernel with config@1"; + kernel = "kernel@0"; + fdt = "fdt@0"; + ramdisk = "ramdisk@0"; + hash@1 { + algo = "sha1"; + }; + }; + config@2 { + description = "Boot Linux kernel with config@2"; + kernel = "kernel@1"; + fdt = "fdt@1"; + ramdisk = "ramdisk@1"; + hash@1 { + algo = "sha1"; + }; + }; +}; + +# Details regarding a file that may be read from a TFTP server. This variable +# may be omitted or set to None if PXE testing is not possible or desired. +env__net_pxe_bootable_file = { + 'fn': 'default', + 'addr': 0x10000000, + 'size': 74, + 'timeout': 50000, + 'pattern': 'Linux', + 'valid_label': '1', + 'invalid_label': '2', + 'exp_str_invalid': 'Skipping install for failure retrieving', + 'local_label': '3', + 'exp_str_local': 'missing environment variable: localcmd', + 'empty_label': '4', + 'exp_str_empty': 'No kernel given, skipping boot', + 'check_type': 'boot_error', + 'check_pattern': 'ERROR', +} + +# False or omitted if a PXE boot test should be tested. +# If PXE boot testing is not possible or desired, set this variable to True. +# For example: If pxe configuration file is not proper to boot +env__pxe_boot_test_skip = False + +# Here is the example of pxe configuration file ordered based on the execution +# flow: +1) /tftpboot/pxelinux.cfg/default-arm-zynqmp + + menu include pxelinux.cfg/default-arm + timeout 50 + + default Linux + +2) /tftpboot/pxelinux.cfg/default-arm + + menu title Linux boot selections + menu include pxelinux.cfg/default + + label install + menu label Invalid boot + kernel kernels/install.bin + append console=ttyAMA0,38400 debug earlyprintk + initrd initrds/uzInitrdDebInstall + + label local + menu label Local boot + append root=/dev/sdb1 + localboot 1 + + label boot + menu label Empty boot + +3) /tftpboot/pxelinux.cfg/default + + label Linux + menu label Boot kernel + kernel Image + fdt system.dtb + initrd rootfs.cpio.gz.u-boot +""" + +def setup_networking(u_boot_console): + test_net.test_net_dhcp(u_boot_console) + if not test_net.net_set_up: + test_net.test_net_setup_static(u_boot_console) + +def setup_tftpboot_boot(u_boot_console): + f = u_boot_console.config.env.get('env__net_tftp_bootable_file', None) + if not f: + pytest.skip('No TFTP bootable file to read') + + setup_networking(u_boot_console) + addr = f.get('addr', None) + if not addr: + addr = u_boot_utils.find_ram_base(u_boot_console) + + fn = f['fn'] + timeout = f.get('timeout', 50000) + + with u_boot_console.temporary_timeout(timeout): + output = u_boot_console.run_command('tftpboot %x %s' % (addr, fn)) + + expected_text = 'Bytes transferred = ' + sz = f.get('size', None) + if sz: + expected_text += '%d' % sz + assert expected_text in output + + expected_crc = f.get('crc32', None) + output = u_boot_console.run_command('crc32 %x $filesize' % addr) + if expected_crc: + assert expected_crc in output + + pattern = f.get('pattern') + chk_type = f.get('check_type', 'boot_error') + chk_pattern = re.compile(f.get('check_pattern', 'ERROR')) + config = f.get('config', None) + + return addr, timeout, pattern, chk_type, chk_pattern, config + +@pytest.mark.buildconfigspec('cmd_net') +def test_net_tftpboot_boot(u_boot_console): + """Boot the loaded image + + A boot file (fit image) is downloaded from the TFTP server and booted using + bootm command with the default fit configuration, its boot log pattern are + validated. + + The details of the file to download are provided by the boardenv_* file; + see the comment at the beginning of this file. + """ + if u_boot_console.config.env.get('env__tftp_boot_test_skip', True): + pytest.skip('TFTP boot test is not enabled!') + + addr, timeout, pattern, chk_type, chk_pattern, imcfg = setup_tftpboot_boot( + u_boot_console + ) + + if imcfg: + bootcmd = 'bootm %x#%s' % (addr, imcfg) + else: + bootcmd = 'bootm %x' % addr + + with u_boot_console.enable_check( + chk_type, chk_pattern + ), u_boot_console.temporary_timeout(timeout): + try: + # wait_for_prompt=False makes the core code not wait for the U-Boot + # prompt code to be seen, since it won't be on a successful kernel + # boot + u_boot_console.run_command(bootcmd, wait_for_prompt=False) + + # Wait for boot log pattern + u_boot_console.wait_for(pattern) + finally: + # This forces the console object to be shutdown, so any subsequent + # test will reset the board back into U-Boot. We want to force this + # no matter whether the kernel boot passed or failed. + u_boot_console.drain_console() + u_boot_console.cleanup_spawn() + +def setup_pxe_boot(u_boot_console): + f = u_boot_console.config.env.get('env__net_pxe_bootable_file', None) + if not f: + pytest.skip('No PXE bootable file to read') + + setup_networking(u_boot_console) + bootfile = u_boot_console.run_command('echo $bootfile') + if not bootfile: + bootfile = '<NULL>' + + return f, bootfile + +@pytest.mark.buildconfigspec('cmd_net') +@pytest.mark.buildconfigspec('cmd_pxe') +def test_net_pxe_boot(u_boot_console): + """Test the pxe boot command. + + A pxe configuration file is downloaded from the TFTP server and interpreted + to boot the images mentioned in pxe configuration file. + + The details of the file to download are provided by the boardenv_* file; + see the comment at the beginning of this file. + """ + if u_boot_console.config.env.get('env__pxe_boot_test_skip', True): + pytest.skip('PXE boot test is not enabled!') + + f, bootfile = setup_pxe_boot(u_boot_console) + addr = f.get('addr', None) + timeout = f.get('timeout', u_boot_console.p.timeout) + fn = f['fn'] + + if addr: + u_boot_console.run_command('setenv pxefile_addr_r %x' % addr) + + with u_boot_console.temporary_timeout(timeout): + output = u_boot_console.run_command('pxe get') + + expected_text = 'Bytes transferred = ' + sz = f.get('size', None) + if sz: + expected_text += '%d' % sz + assert 'TIMEOUT' not in output + assert expected_text in output + assert f"Config file '{bootfile}' found" in output + + pattern = f.get('pattern') + chk_type = f.get('check_type', 'boot_error') + chk_pattern = re.compile(f.get('check_pattern', 'ERROR')) + + if not addr: + pxe_boot_cmd = 'pxe boot' + else: + pxe_boot_cmd = 'pxe boot %x' % addr + + with u_boot_console.enable_check( + chk_type, chk_pattern + ), u_boot_console.temporary_timeout(timeout): + try: + u_boot_console.run_command(pxe_boot_cmd, wait_for_prompt=False) + u_boot_console.wait_for(pattern) + finally: + u_boot_console.drain_console() + u_boot_console.cleanup_spawn() + +@pytest.mark.buildconfigspec('cmd_net') +@pytest.mark.buildconfigspec('cmd_pxe') +def test_net_pxe_boot_config(u_boot_console): + """Test the pxe boot command by selecting different combination of labels + + A pxe configuration file is downloaded from the TFTP server and interpreted + to boot the images mentioned in pxe configuration file. + + The details of the file to download are provided by the boardenv_* file; + see the comment at the beginning of this file. + """ + if u_boot_console.config.env.get('env__pxe_boot_test_skip', True): + pytest.skip('PXE boot test is not enabled!') + + f, bootfile = setup_pxe_boot(u_boot_console) + addr = f.get('addr', None) + timeout = f.get('timeout', u_boot_console.p.timeout) + fn = f['fn'] + local_label = f['local_label'] + empty_label = f['empty_label'] + exp_str_local = f['exp_str_local'] + exp_str_empty = f['exp_str_empty'] + + if addr: + u_boot_console.run_command('setenv pxefile_addr_r %x' % addr) + + with u_boot_console.temporary_timeout(timeout): + output = u_boot_console.run_command('pxe get') + + expected_text = 'Bytes transferred = ' + sz = f.get('size', None) + if sz: + expected_text += '%d' % sz + assert 'TIMEOUT' not in output + assert expected_text in output + assert f"Config file '{bootfile}' found" in output + + pattern = f.get('pattern') + chk_type = f.get('check_type', 'boot_error') + chk_pattern = re.compile(f.get('check_pattern', 'ERROR')) + + if not addr: + pxe_boot_cmd = 'pxe boot' + else: + pxe_boot_cmd = 'pxe boot %x' % addr + + with u_boot_console.enable_check( + chk_type, chk_pattern + ), u_boot_console.temporary_timeout(timeout): + try: + u_boot_console.run_command(pxe_boot_cmd, wait_for_prompt=False) + + # pxe config is loaded where multiple labels are there and need to + # select particular label to boot and check for expected string + # In this case, local label is selected and it should look for + # localcmd env variable and if that variable is not defined it + # should not boot it and come out to u-boot prompt + u_boot_console.wait_for('Enter choice:') + u_boot_console.run_command(local_label, wait_for_prompt=False) + expected_str = u_boot_console.p.expect([exp_str_local]) + assert ( + expected_str == 0 + ), f'Expected string: {exp_str_local} did not match!' + + # In this case, empty label is selected and it should look for + # kernel image path and if it is not set it should fail it and load + # default label to boot + u_boot_console.run_command(pxe_boot_cmd, wait_for_prompt=False) + u_boot_console.wait_for('Enter choice:') + u_boot_console.run_command(empty_label, wait_for_prompt=False) + expected_str = u_boot_console.p.expect([exp_str_empty]) + assert ( + expected_str == 0 + ), f'Expected string: {exp_str_empty} did not match!' + + u_boot_console.wait_for(pattern) + finally: + u_boot_console.drain_console() + u_boot_console.cleanup_spawn() + +@pytest.mark.buildconfigspec('cmd_net') +@pytest.mark.buildconfigspec('cmd_pxe') +def test_net_pxe_boot_config_invalid(u_boot_console): + """Test the pxe boot command by selecting invalid label + + A pxe configuration file is downloaded from the TFTP server and interpreted + to boot the images mentioned in pxe configuration file. + + The details of the file to download are provided by the boardenv_* file; + see the comment at the beginning of this file. + """ + if u_boot_console.config.env.get('env__pxe_boot_test_skip', True): + pytest.skip('PXE boot test is not enabled!') + + f, bootfile = setup_pxe_boot(u_boot_console) + addr = f.get('addr', None) + timeout = f.get('timeout', u_boot_console.p.timeout) + fn = f['fn'] + invalid_label = f['invalid_label'] + exp_str_invalid = f['exp_str_invalid'] + + if addr: + u_boot_console.run_command('setenv pxefile_addr_r %x' % addr) + + with u_boot_console.temporary_timeout(timeout): + output = u_boot_console.run_command('pxe get') + + expected_text = 'Bytes transferred = ' + sz = f.get('size', None) + if sz: + expected_text += '%d' % sz + assert 'TIMEOUT' not in output + assert expected_text in output + assert f"Config file '{bootfile}' found" in output + + pattern = f.get('pattern') + if not addr: + pxe_boot_cmd = 'pxe boot' + else: + pxe_boot_cmd = 'pxe boot %x' % addr + + with u_boot_console.temporary_timeout(timeout): + try: + u_boot_console.run_command(pxe_boot_cmd, wait_for_prompt=False) + + # pxe config is loaded where multiple labels are there and need to + # select particular label to boot and check for expected string + # In this case invalid label is selected, it should load invalid + # label and if it fails it should load the default label to boot + u_boot_console.wait_for('Enter choice:') + u_boot_console.run_command(invalid_label, wait_for_prompt=False) + expected_str = u_boot_console.p.expect([exp_str_invalid]) + assert ( + expected_str == 0 + ), f'Expected string: {exp_str_invalid} did not match!' + + u_boot_console.wait_for(pattern) + finally: + u_boot_console.drain_console() + u_boot_console.cleanup_spawn()