On 7 September 2015 at 12:09, Mirza Krak mirza.krak@hostmobility.com wrote:

From: Mirza Krak mirza.krak@hostmobility.com

Respect the mode passed in claim_bus call.

Signed-off-by: Mirza Krak mirza.krak@hostmobility.com

Changes in v2:

• Refactor clearing the CPOL and CPHA bits. Based on comments from Jagan Teki.

drivers/spi/tegra20_slink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)

diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c index fbb665b86f3f..fa39dea2daf1 100644 --- a/drivers/spi/tegra20_slink.c +++ b/drivers/spi/tegra20_slink.c @@ -36,6 +36,11 @@ DECLARE_GLOBAL_DATA_PTR; #define SLINK_CMD_ENB (1 << 31) #define SLINK_CMD_GO (1 << 30) #define SLINK_CMD_M_S (1 << 28) +#define SLINK_CMD_IDLE_SCLK_DRIVE_LOW (0 << 24) +#define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH (1 << 24) +#define SLINK_CMD_IDLE_SCLK_PULL_LOW (2 << 24) +#define SLINK_CMD_IDLE_SCLK_PULL_HIGH (3 << 24) +#define SLINK_CMD_IDLE_SCLK_MASK (3 << 24) #define SLINK_CMD_CK_SDA (1 << 21) #define SLINK_CMD_CS_POL (1 << 13) #define SLINK_CMD_CS_VAL (1 << 12) @@ -146,6 +151,7 @@ static int tegra30_spi_claim_bus(struct udevice *dev) struct udevice *bus = dev->parent; struct tegra30_spi_priv *priv = dev_get_priv(bus); struct spi_regs *regs = priv->regs;

•   unsigned int mode = priv->mode;
    u32 reg;
  
    /* Change SPI clock to correct frequency, PLLP_OUT0 source */
  

@@ -161,6 +167,17 @@ static int tegra30_spi_claim_bus(struct udevice *dev) /* Set master mode and sw controlled CS */ reg = readl(&regs->command); reg |= SLINK_CMD_M_S | SLINK_CMD_CS_SOFT;

•   /* Set CPOL and CPHA */
  

•   reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA);
  

•   if (mode & SPI_CPHA)
  

•           reg |= SLINK_CMD_CK_SDA;
  

•   if (mode & SPI_CPOL)
  

•           reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH;
  

•   else
  

•           reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW;
  

And also this mode should be part of .set_mode ops like speed we have one more ops to configure mode (clock phase and polarities)

    writel(reg, &regs->command);
    debug("%s: COMMAND = %08x\n", __func__, readl(&regs->command));

-- 2.1.0

thanks!