Re: [U-Boot] u-boot-tegra/master and /next have been updated and uploaded to denx.de
Folks,
u-boot-tegra/next has been updated with new patches from Lucas, Marc, and Stephen, rebased against u-boot-arm, and pushed to denx.de.
Please use this for any future patches, and if you have patches under review, please rebase them if they no longer apply cleanly.
I'm going to be on vacation from the 16th thru the 25th of October. If you have stuff you want in /next, and it's reviewed/Acked/tested, let me know and I'll try to get it in on Monday before I leave.
Thanks,
Tom
On 10/12/2012 03:26 PM, Tom Warren wrote:
Folks,
u-boot-tegra/next has been updated with new patches from Lucas, Marc, and Stephen, rebased against u-boot-arm, and pushed to denx.de.
u-boot-tegra/next right now is based on u-boot-arm/master, but includes patches that are both:
a) Already in u-boot-arm/next (but *not* u-boot-arm/master since master is for the current release and next is for the next release)
b) New.
I think you want to create (rebase) u-boot-tegra/next based on u-boot-arm/next, and drop the following patches (they would rebase out anyway if you just rebase onto u-boot-arm/next):
c699a7b tegra: nand: add board pinmux c7560dd tegra: clean up board include hell 1ddfbf3 tegra: add funcmux entry for NAND attached to KBC 8d49ab8 tegra20: rework UART GPIO handling 5904a2e tegra20: add clock_set_pllout function 0e0eb51 tegra20: complete periph_id enum 7811a6d tegra: enable CONFIG_CMD_PART 517ef6d Tegra20: Move some include files to arch-tegra for sharing with Tegra30 1367676 Tegra20: Move some code files to common directories for upcoming Tegra30 patches. 7d92ef4 tegra: Rename Medcom to Medcom-Wide c527d55 tegra: Update Avionic Design vendor prefix
Hi Stephen,
On Fri, 12 Oct 2012 15:30:42 -0600, Stephen Warren swarren@wwwdotorg.org wrote:
On 10/12/2012 03:26 PM, Tom Warren wrote:
Folks,
u-boot-tegra/next has been updated with new patches from Lucas, Marc, and Stephen, rebased against u-boot-arm, and pushed to denx.de.
u-boot-tegra/next right now is based on u-boot-arm/master, but includes patches that are both:
a) Already in u-boot-arm/next (but *not* u-boot-arm/master since master is for the current release and next is for the next release)
b) New.
I think you want to create (rebase) u-boot-tegra/next based on u-boot-arm/next, and drop the following patches (they would rebase out anyway if you just rebase onto u-boot-arm/next):
c699a7b tegra: nand: add board pinmux c7560dd tegra: clean up board include hell 1ddfbf3 tegra: add funcmux entry for NAND attached to KBC 8d49ab8 tegra20: rework UART GPIO handling 5904a2e tegra20: add clock_set_pllout function 0e0eb51 tegra20: complete periph_id enum 7811a6d tegra: enable CONFIG_CMD_PART 517ef6d Tegra20: Move some include files to arch-tegra for sharing with Tegra30 1367676 Tegra20: Move some code files to common directories for upcoming Tegra30 patches. 7d92ef4 tegra: Rename Medcom to Medcom-Wide c527d55 tegra: Update Avionic Design vendor prefix
I've rebased arm/next onto u-boot/next as they are now in sync -- whatever was on my next is now on master or in u-boot/next, with the addition of the lh7a40x removal.
Amicalement,
participants (3)
-
Albert ARIBAUD -
Stephen Warren -
Tom Warren