These boards have not been converted to generic board by the deadline. Remove them.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/Kconfig | 10 - arch/arm/include/asm/mach-types.h | 26 -- board/st-ericsson/snowball/Kconfig | 15 - board/st-ericsson/snowball/MAINTAINERS | 6 - board/st-ericsson/snowball/Makefile | 9 - board/st-ericsson/snowball/db8500_pins.h | 745 ------------------------------- board/st-ericsson/snowball/snowball.c | 340 -------------- board/st-ericsson/u8500/Kconfig | 15 - board/st-ericsson/u8500/MAINTAINERS | 6 - board/st-ericsson/u8500/Makefile | 9 - board/st-ericsson/u8500/gpio.c | 331 -------------- board/st-ericsson/u8500/u8500_href.c | 477 -------------------- configs/snowball_defconfig | 13 - configs/u8500_href_defconfig | 13 - include/configs/snowball.h | 232 ---------- include/configs/u8500_href.h | 198 -------- 16 files changed, 2445 deletions(-) delete mode 100644 board/st-ericsson/snowball/Kconfig delete mode 100644 board/st-ericsson/snowball/MAINTAINERS delete mode 100644 board/st-ericsson/snowball/Makefile delete mode 100644 board/st-ericsson/snowball/db8500_pins.h delete mode 100644 board/st-ericsson/snowball/snowball.c delete mode 100644 board/st-ericsson/u8500/Kconfig delete mode 100644 board/st-ericsson/u8500/MAINTAINERS delete mode 100644 board/st-ericsson/u8500/Makefile delete mode 100644 board/st-ericsson/u8500/gpio.c delete mode 100644 board/st-ericsson/u8500/u8500_href.c delete mode 100644 configs/snowball_defconfig delete mode 100644 configs/u8500_href_defconfig delete mode 100644 include/configs/snowball.h delete mode 100644 include/configs/u8500_href.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0ef52bd..5429dc8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -662,14 +662,6 @@ config ARCH_SUNXI select USB_STORAGE select USB_KEYBOARD

-config TARGET_SNOWBALL - bool "Support snowball" - select CPU_V7 - -config TARGET_U8500_HREF - bool "Support u8500_href" - select CPU_V7 - config TARGET_VF610TWR bool "Support vf610twr" select CPU_V7 @@ -967,8 +959,6 @@ source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" -source "board/st-ericsson/snowball/Kconfig" -source "board/st-ericsson/u8500/Kconfig" source "board/st/stm32f429-discovery/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 55a543a..d51be0b 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -402,7 +402,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_IGEP0020 2344 #define MACH_TYPE_NUC932EVB 2356 #define MACH_TYPE_OPENRD_CLIENT 2361 -#define MACH_TYPE_U8500 2368 #define MACH_TYPE_MX51_EFIKASB 2370 #define MACH_TYPE_MARVELL_JASPER 2382 #define MACH_TYPE_FLINT 2383 @@ -974,7 +973,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_RHINO 3360 #define MACH_TYPE_ARMLEX4210 3361 #define MACH_TYPE_SWARCOEXTMODEM 3362 -#define MACH_TYPE_SNOWBALL 3363 #define MACH_TYPE_PCM049 3364 #define MACH_TYPE_VIGOR 3365 #define MACH_TYPE_OSLO_AMUNDSEN 3366 @@ -5754,18 +5752,6 @@ extern unsigned int __machine_arch_type; # define machine_is_openrd_client() (0) #endif

-#ifdef CONFIG_MACH_U8500 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_U8500 -# endif -# define machine_is_u8500() (machine_arch_type == MACH_TYPE_U8500) -#else -# define machine_is_u8500() (0) -#endif - #ifdef CONFIG_MACH_MX51_EFIKASB # ifdef machine_arch_type # undef machine_arch_type @@ -12618,18 +12604,6 @@ extern unsigned int __machine_arch_type; # define machine_is_swarcoextmodem() (0) #endif

-#ifdef CONFIG_MACH_SNOWBALL -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_SNOWBALL -# endif -# define machine_is_snowball() (machine_arch_type == MACH_TYPE_SNOWBALL) -#else -# define machine_is_snowball() (0) -#endif - #ifdef CONFIG_MACH_PCM049 # ifdef machine_arch_type # undef machine_arch_type diff --git a/board/st-ericsson/snowball/Kconfig b/board/st-ericsson/snowball/Kconfig deleted file mode 100644 index 0b3a0cc..0000000 --- a/board/st-ericsson/snowball/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_SNOWBALL - -config SYS_BOARD - default "snowball" - -config SYS_VENDOR - default "st-ericsson" - -config SYS_SOC - default "u8500" - -config SYS_CONFIG_NAME - default "snowball" - -endif diff --git a/board/st-ericsson/snowball/MAINTAINERS b/board/st-ericsson/snowball/MAINTAINERS deleted file mode 100644 index 132fc52..0000000 --- a/board/st-ericsson/snowball/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SNOWBALL BOARD -M: Mathieu Poirier mathieu.poirier@linaro.org -S: Maintained -F: board/st-ericsson/snowball/ -F: include/configs/snowball.h -F: configs/snowball_defconfig diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile deleted file mode 100644 index f0605e2..0000000 --- a/board/st-ericsson/snowball/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) ST-Ericsson SA 2009 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ccflags-y += -D__RELEASE -D__STN_8500 - -obj-y := snowball.o diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h deleted file mode 100644 index e339cb8..0000000 --- a/board/st-ericsson/snowball/db8500_pins.h +++ /dev/null @@ -1,745 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. - * The purpose is that GPIO config found in kernel should work by simply - * copy-paste it to U-boot. - * - * Ported to U-boot by: - * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> - ** - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent rabin.vincent@stericsson.com - */ - -#ifndef __DB8500_PINS_H -#define __DB8500_PINS_H - -#include <asm/arch/db8500_pincfg.h> - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) -#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) -#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) -#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) -#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) -#define GPIO2_NONE PIN_CFG(2, ALT_B) -#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) -#define GPIO3_NONE PIN_CFG(3, ALT_B) -#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) -#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) -#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) -#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) -#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) -#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) -#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) -#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) -#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) -#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) -#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) -#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) -#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) -#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) -#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) -#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) -#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) -#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) -#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) -#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) -#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) -#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) -#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) -#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) -#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) -#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) -#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) -#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) -#define GPIO24_MS_BS PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) -#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) -#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) -#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) -#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) -#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) -#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) -#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) -#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) -#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) -#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) -#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) -#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) -#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) -#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) -#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) -#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) -#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) -#define GPIO34_NONE PIN_CFG(34, ALT_B) -#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) -#define GPIO35_NONE PIN_CFG(35, ALT_B) -#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) - -#define GPIO36_GPIO PIN_CFG(36, GPIO) -#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) -#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) -#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) -#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) -#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) -#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) -#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) -#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) -#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) -#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) -#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) -#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) -#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) -#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) -#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) -#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) -#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) -#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) -#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) -#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) -#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) -#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) -#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) -#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) -#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) -#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) -#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) -#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) -#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) -#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) -#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) -#define GPIO77_NONE PIN_CFG(77, ALT_C) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) -#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) -#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) -#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) -#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) -#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) -#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) -#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) -#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) -#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) - -#define GPIO83_GPIO PIN_CFG(83, GPIO) -#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) -#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) - -#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP) -#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) -#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) - -#define GPIO85_GPIO PIN_CFG(85, GPIO) -#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) -#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) - -#define GPIO86_GPIO PIN_CFG(86, GPIO) -#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) -#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) -#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) - -#define GPIO87_GPIO PIN_CFG(87, GPIO) -#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) -#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) -#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) - -#define GPIO88_GPIO PIN_CFG(88, GPIO) -#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) -#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) -#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) - -#define GPIO89_GPIO PIN_CFG(89, GPIO) -#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) -#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) -#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) - -#define GPIO90_GPIO PIN_CFG(90, GPIO) -#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) -#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) -#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) - -#define GPIO91_GPIO PIN_CFG(91, GPIO) -#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) -#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) -#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) - -#define GPIO92_GPIO PIN_CFG(92, GPIO) -#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) -#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) -#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) - -#define GPIO93_GPIO PIN_CFG(93, GPIO) -#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) -#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) -#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) - -#define GPIO94_GPIO PIN_CFG(94, GPIO) -#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) -#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) -#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) - -#define GPIO95_GPIO PIN_CFG(95, GPIO) -#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) -#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) -#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) -#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) -#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) -#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) -#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) -#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) -#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) -#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) -#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) -#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) -#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) -#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) -#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) -#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) -#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) -#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) -#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) -#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) -#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) -#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) -#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) -#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) -#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) -#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) -#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) - -#define GPIO149_GPIO PIN_CFG(149, GPIO) -#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) -#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) -#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) - -#define GPIO150_GPIO PIN_CFG(150, GPIO) -#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) -#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) - -#define GPIO151_GPIO PIN_CFG(151, GPIO) -#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) -#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) -#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) - -#define GPIO152_GPIO PIN_CFG(152, GPIO) -#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) -#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) -#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) - -#define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) -#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) -#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) - -#define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) -#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) -#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) - -#define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) -#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) -#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) - -#define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) -#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) -#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) - -#define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) -#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) -#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) - -#define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) -#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) -#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) - -#define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) -#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) -#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) -#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) -#define GPIO160_NONE PIN_CFG(160, ALT_C) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) -#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) -#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) -#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) -#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) -#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) -#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) -#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) -#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) -#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) -#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) -#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) -#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) -#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) -#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) -#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) -#define GPIO168_NONE PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) -#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) -#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) -#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) -#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) -#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) -#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) -#define GPIO202_PWL PIN_CFG(202, ALT_B) -#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) -#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) -#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) -#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) -#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) -#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) -#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) -#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) -#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) -#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) -#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) -#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) -#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) -#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) -#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) -#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) -#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) -#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) -#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) -#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) -#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) -#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) -#define GPIO226_PWL PIN_CFG(226, ALT_B) -#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) - -#define GPIO228_GPIO PIN_CFG(228, GPIO) -#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) - -#define GPIO229_GPIO PIN_CFG(229, GPIO) -#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) -#define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) - -#define GPIO230_GPIO PIN_CFG(230, GPIO) -#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) -#define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) - -#define GPIO256_GPIO PIN_CFG(256, GPIO) -#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) - -#define GPIO257_GPIO PIN_CFG(257, GPIO) -#define GPIO257_USB_STP PIN_CFG(257, ALT_A) - -#define GPIO258_GPIO PIN_CFG(258, GPIO) -#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) -#define GPIO258_NONE PIN_CFG(258, ALT_B) -#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) - -#define GPIO259_GPIO PIN_CFG(259, GPIO) -#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) - -#define GPIO260_GPIO PIN_CFG(260, GPIO) -#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) - -#define GPIO261_GPIO PIN_CFG(261, GPIO) -#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) - -#define GPIO262_GPIO PIN_CFG(262, GPIO) -#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) - -#define GPIO263_GPIO PIN_CFG(263, GPIO) -#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) - -#define GPIO264_GPIO PIN_CFG(264, GPIO) -#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) - -#define GPIO265_GPIO PIN_CFG(265, GPIO) -#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) - -#define GPIO266_GPIO PIN_CFG(266, GPIO) -#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) - -#define GPIO267_GPIO PIN_CFG(267, GPIO) -#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) - -#endif diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c deleted file mode 100644 index c3061e2..0000000 --- a/board/st-ericsson/snowball/snowball.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <malloc.h> -#include <i2c.h> -#include <mmc.h> -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/db8500_pincfg.h> -#include <asm/arch/prcmu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sys_proto.h> - -#ifdef CONFIG_MMC -#include "../../../drivers/mmc/arm_pl180_mmci.h" -#endif -#include "db8500_pins.h" - -/* - * Get a global data pointer - */ -DECLARE_GLOBAL_DATA_PTR; - -/* - * Memory controller register - */ -#define DMC_BASE_ADDR 0x80156000 -#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) - -/* - * GPIO pin config common for MOP500/HREF boards - */ -unsigned long gpio_cfg_common[] = { - /* I2C */ - GPIO147_I2C0_SCL, - GPIO148_I2C0_SDA, - GPIO16_I2C1_SCL, - GPIO17_I2C1_SDA, - GPIO10_I2C2_SDA, - GPIO11_I2C2_SCL, - GPIO229_I2C3_SDA, - GPIO230_I2C3_SCL, - - /* SSP0, to AB8500 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, - - /* MMC0 (MicroSD card) */ - GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, - GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, - GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, - GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, - GPIO23_MC0_CLK | PIN_OUTPUT_LOW, - GPIO24_MC0_CMD | PIN_INPUT_PULLUP, - GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, - GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, - GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, - GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, - - /* MMC4 (On-board eMMC) */ - GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, - GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, - GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, - GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, - GPIO201_MC4_CMD | PIN_INPUT_PULLUP, - GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, - GPIO203_MC4_CLK | PIN_OUTPUT_LOW, - GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, - GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, - GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, - GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, - - /* UART2, console */ - GPIO29_U2_RXD | PIN_INPUT_PULLUP, - GPIO30_U2_TXD | PIN_OUTPUT_HIGH, - GPIO31_U2_CTSn | PIN_INPUT_PULLUP, - GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, - - /* - * USB, pin 256-267 USB, Is probably already setup correctly from - * BootROM/boot stages, but we don't trust that and set it up anyway - */ - GPIO256_USB_NXT, - GPIO257_USB_STP, - GPIO258_USB_XCLK, - GPIO259_USB_DIR, - GPIO260_USB_DAT7, - GPIO261_USB_DAT6, - GPIO262_USB_DAT5, - GPIO263_USB_DAT4, - GPIO264_USB_DAT3, - GPIO265_USB_DAT2, - GPIO266_USB_DAT1, - GPIO267_USB_DAT0, -}; - -unsigned long gpio_cfg_snowball[] = { - /* MMC0 (MicroSD card) */ - GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */ - GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */ - GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */ - - /* eMMC */ - GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */ - - /* LAN */ - GPIO131_SM_ADQ8, - GPIO132_SM_ADQ9, - GPIO133_SM_ADQ10, - GPIO134_SM_ADQ11, - GPIO135_SM_ADQ12, - GPIO136_SM_ADQ13, - GPIO137_SM_ADQ14, - GPIO138_SM_ADQ15, - - /* RSTn_LAN */ - GPIO141_GPIO | PIN_OUTPUT_HIGH, -}; - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* - * Setup board (bd) and board-info (bi). - * bi_arch_number: Unique id for this board. It will passed in r1 to - * Linux startup code and is the machine_id. - * bi_boot_params: Where this board expects params. - */ - gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL; - gd->bd->bi_boot_params = 0x00000100; - - /* Configure GPIO pins needed by U-boot */ - db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common)); - - db8500_gpio_config_pins(gpio_cfg_snowball, - ARRAY_SIZE(gpio_cfg_snowball)); - - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->ram_size = gd->bd->bi_dram[0].size = - get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); - - return 0; -} - -static int raise_ab8500_gpio16(void) -{ - int ret; - - /* selection */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret); - if (ret < 0) - goto out; - - /* direction */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret); - if (ret < 0) - goto out; - - /* out */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret); - -out: - return ret; -} - -static int raise_ab8500_gpio26(void) -{ - int ret; - - /* selection */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG); - if (ret < 0) - goto out; - - ret |= 0x2; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret); - if (ret < 0) - goto out; - - /* out */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG); - if (ret < 0) - goto out; - - ret |= 0x2; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret); - -out: - return ret; -} - -int board_late_init(void) -{ - /* enable 3V3 for LAN controller */ - if (raise_ab8500_gpio26() >= 0) { - /* Turn on FSMC device */ - writel(0x1, 0x8000f000); - writel(0x1, 0x8000f008); - - /* setup FSMC for LAN controler */ - writel(0x305b, 0x80000000); - - /* run at the highest possible speed */ - writel(0x01010210, 0x80000004); - } else - printf("error: can't raise GPIO26\n"); - - /* enable 3v6 for GBF chip */ - if ((raise_ab8500_gpio16() < 0)) - printf("error: cant' raise GPIO16\n"); - - /* empty UART RX FIFO */ - while (tstc()) - (void) getc(); - - return 0; -} - -#ifdef CONFIG_MMC -/* - * emmc_host_init - initialize the emmc controller. - * Configure GPIO settings, set initial clock and power for emmc slot. - * Initialize mmc struct and register with mmc framework. - */ -static int emmc_host_init(void) -{ - struct pl180_mmc_host *host; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - host->base = (struct sdi_registers *)CFG_EMMC_BASE; - host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | - SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; - strcpy(host->name, "EMMC"); - host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz; - host->voltages = VOLTAGE_WINDOW_MMC; - host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); - host->clock_max = ARM_MCLK / 2; - host->clock_in = ARM_MCLK; - host->version2 = 1; - - return arm_pl180_mmci_init(host); -} - -/* - * mmc_host_init - initialize the external mmc controller. - * Configure GPIO settings, set initial clock and power for mmc slot. - * Initialize mmc struct and register with mmc framework. - */ -static int mmc_host_init(void) -{ - struct pl180_mmc_host *host; - u32 sdi_u32; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - host->base = (struct sdi_registers *)CFG_MMC_BASE; - sdi_u32 = 0xBF; - writel(sdi_u32, &host->base->power); - host->pwr_init = 0xBF; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | - SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; - strcpy(host->name, "MMC"); - host->caps = MMC_MODE_8BIT; - host->b_max = 0; - host->voltages = VOLTAGE_WINDOW_SD; - host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); - host->clock_max = ARM_MCLK / 2; - host->clock_in = ARM_MCLK; - host->version2 = 1; - - return arm_pl180_mmci_init(host); -} - -/* - * board_mmc_init - initialize all the mmc/sd host controllers. - * Called by generic mmc framework. - */ -int board_mmc_init(bd_t *bis) -{ - int error; - - (void) bis; - - error = emmc_host_init(); - if (error) { - printf("emmc_host_init() %d\n", error); - return -1; - } - - u8500_mmc_power_init(); - - error = mmc_host_init(); - if (error) { - printf("mmc_host_init() %d\n", error); - return -1; - } - - return 0; -} -#endif /* CONFIG_MMC */ diff --git a/board/st-ericsson/u8500/Kconfig b/board/st-ericsson/u8500/Kconfig deleted file mode 100644 index 909f30d..0000000 --- a/board/st-ericsson/u8500/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_U8500_HREF - -config SYS_BOARD - default "u8500" - -config SYS_VENDOR - default "st-ericsson" - -config SYS_SOC - default "u8500" - -config SYS_CONFIG_NAME - default "u8500_href" - -endif diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS deleted file mode 100644 index e2581eb..0000000 --- a/board/st-ericsson/u8500/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -U8500 BOARD -#M: - -S: Maintained -F: board/st-ericsson/u8500/ -F: include/configs/u8500_href.h -F: configs/u8500_href_defconfig diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile deleted file mode 100644 index d6c4280..0000000 --- a/board/st-ericsson/u8500/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) ST-Ericsson SA 2009 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ccflags-y += -D__RELEASE -D__STN_8500 - -obj-y := u8500_href.o gpio.o diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c deleted file mode 100644 index 2ddc7af..0000000 --- a/board/st-ericsson/u8500/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/gpio.h> - -static struct gpio_register *addr_gpio_register[] = { - (void *)U8500_GPIO_0_BASE, - (void *)U8500_GPIO_1_BASE, - (void *)U8500_GPIO_2_BASE, - (void *)U8500_GPIO_3_BASE, - (void *)U8500_GPIO_4_BASE, - (void *)U8500_GPIO_5_BASE, - (void *)U8500_GPIO_6_BASE, - (void *)U8500_GPIO_7_BASE, - (void *)U8500_GPIO_8_BASE, -}; - -struct gpio_altfun_data altfun_table[] = { - { - .altfun = GPIO_ALT_I2C_0, - .start = 147, - .end = 148, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_I2C_1, - .start = 16, - .end = 17, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_I2C_2, - .start = 10, - .end = 11, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_I2C_3, - .start = 229, - .end = 230, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_UART_0_MODEM, - .start = 0, - .end = 3, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_UART_0_MODEM, - .start = 33, - .end = 36, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_UART_1, - .start = 4, - .end = 7, - .cont = 0, - .type = - GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_UART_2, - .start = 18, - .end = 19, - .cont = 1, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_UART_2, - .start = 29, - .end = 32, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_MSP_0, - .start = 12, - .end = 17, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MSP_0, - .start = 21, - .end = 21, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_MSP_1, - .start = 33, - .end = 36, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MSP_2, - .start = 192, - .end = 196, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_LCD_PANEL, - .start = 64, - .end = 93, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_LCD_PANEL, - .start = 150, - .end = 171, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_SD_CARD0, - .start = 18, - .end = 28, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MM_CARD0, - .start = 18, - .end = 32, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_USB_OTG, - .start = 256, - .end = 267, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_EMMC, - .start = 197, - .end = 207, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_POP_EMMC, - .start = 128, - .end = 138, - .cont = 0, - .type = GPIO_ALTF_A, - }, -}; - -/* - * Static Function declarations - */ -enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - enum gpio_error error = GPIO_OK; - u32 temp_reg; - - switch (config->mode) { - case GPIO_ALTF_A: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_ALTF_B: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_ALTF_C: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_MODE_SOFTWARE: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - - switch (config->direction) { - case GPIO_DIR_INPUT: - writel(mask, &p_gpio_register->gpio_dirc); - break; - case GPIO_DIR_OUTPUT: - writel(mask, &p_gpio_register->gpio_dirs); - break; - case GPIO_DIR_LEAVE_UNCHANGED: - break; - default: - return GPIO_INVALID_PARAMETER; - } - - break; - case GPIO_MODE_LEAVE_UNCHANGED: - break; - default: - return GPIO_INVALID_PARAMETER; - } - return error; -} - -enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - enum gpio_error error = GPIO_OK; - u32 temp_reg; - - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - writel(mask, &p_gpio_register->gpio_dirc); - - return error; -} - -struct gpio_config altfun_pinconfig; -enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func, - int which_altfunc, char *dev_name) -{ - int i, j, start, end; - enum gpio_error error = -1; - - for (i = 0; i < ARRAY_SIZE(altfun_table); i++) { - if (altfun_table[i].altfun != alt_func) - continue; - - start = altfun_table[i].start; - end = altfun_table[i].end; - for (j = start; j <= end; j++) { - if (which_altfunc == GPIO_ALTF_FIND) - altfun_pinconfig.mode = altfun_table[i].type; - else - altfun_pinconfig.mode = which_altfunc; - altfun_pinconfig.direction = GPIO_DIR_OUTPUT; - altfun_pinconfig.dev_name = dev_name; - - if (which_altfunc != GPIO_ALTF_DISABLE) - error = gpio_setpinconfig(j, &altfun_pinconfig); - else - error = gpio_resetgpiopin(j, dev_name); - if (!error) - continue; - printf("GPIO %d configuration failure (nmdk_error:%d)", - j, error); - error = GPIO_INVALID_PARAMETER; - return error; - } - - if (!altfun_table[i].cont) - break; - } - return error; -} - -int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - - switch (value) { - case GPIO_DATA_HIGH: - writel(mask, &p_gpio_register->gpio_dats); - break; - case GPIO_DATA_LOW: - writel(mask, &p_gpio_register->gpio_datc); - break; - default: - printf("Invalid value passed in %s", __FUNCTION__); - return GPIO_INVALID_PARAMETER; - } - return GPIO_OK; -} - -int gpio_readpin(int pin_id, enum gpio_data *rv) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - - if ((readl(&p_gpio_register->gpio_dat) & mask) != 0) - *rv = GPIO_DATA_HIGH; - else - *rv = GPIO_DATA_LOW; - return GPIO_OK; -} - -int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name) -{ - return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name); -} - -int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name) -{ - return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name); -} diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c deleted file mode 100644 index 9df499b..0000000 --- a/board/st-ericsson/u8500/u8500_href.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <malloc.h> -#include <i2c.h> -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/prcmu.h> -#ifdef CONFIG_MMC -#include "../../../drivers/mmc/arm_pl180_mmci.h" -#endif - -#define NOMADIK_PER4_BASE (0x80150000) -#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000) -#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000) - -/* Power, Reset, Clock Management Unit */ -/* - * SVA: Smart Video Accelerator - * SIA: Smart Imaging Accelerator - * SGA: Smart Graphic accelerator - * B2R2: Graphic blitter - */ -#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000) -#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004) -#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008) -#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C) -#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010) -#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014) -#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) -#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) -#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) -#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) -#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028) -#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) -#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) -#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) -#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) -#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) -#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) -#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074) -#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078) - -#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080) -#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084) -#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088) -#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C) -#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114) - -#define PRCM_TCR (PRCMU_BASE + 0x1C8) - -/* - * Memory controller register - */ -#define DMC_BASE_ADDR 0x80156000 -#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) - -int board_id; /* set in board_late_init() */ - -/* PLLs for clock management registers */ -enum { - GATED = 0, - PLLSOC0, /* pllsw = 001, ffs() = 1 */ - PLLSOC1, /* pllsw = 010, ffs() = 2 */ - PLLDDR, /* pllsw = 100, ffs() = 3 */ - PLLARM, -}; - -static struct pll_freq_regs { - int idx; /* index fror pll_name and pll_khz arrays */ - uint32_t addr; -} pll_freq_regs[] = { - {PLLSOC0, PRCM_PLLSOC0_FREQ_REG}, - {PLLSOC1, PRCM_PLLSOC1_FREQ_REG}, - {PLLDDR, PRCM_PLLDDR_FREQ_REG}, - {PLLARM, PRCM_PLLARM_FREQ_REG}, - {0, 0}, -}; - -static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"}; -static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */ - -static struct clk_mgt_regs { - uint32_t addr; - uint32_t val; - const char *descr; -} clk_mgt_regs[] = { - /* register content taken from bootrom settings */ - {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */ - {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */ - {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */ - {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */ - {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */ - {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */ - {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */ - {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */ - {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */ - {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */ - {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */ - {PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */ - {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */ - {0, 0, NULL}, -}; - -static void init_regs(void); - -DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SHOW_BOOT_PROGRESS) -void show_boot_progress(int progress) -{ - printf("Boot reached stage %d\n", progress); -} -#endif - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_early_init_f(void) -{ - init_regs(); - return 0; -} - -int board_init(void) -{ - uint32_t unused_cols_rows; - unsigned int nrows; - unsigned int ncols; - - gd->bd->bi_arch_number = 0x1A4; - gd->bd->bi_boot_params = 0x00000100; - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - - /* - * Assumption: 2 CS active, both CS have same layout. - * 15 rows max, 11 cols max (controller spec). - * memory chip has 8 banks, I/O width 32 bit. - * The correct way would be to read MR#8: I/O width and density, - * but this requires locking against the PRCMU firmware. - * Simplified approach: - * Read number of unused rows and columns from mem controller. - * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes - */ - unused_cols_rows = readl(DMC_CTL_97); - nrows = 15 - (unused_cols_rows & 0x07); - ncols = 11 - ((unused_cols_rows & 0x0700) >> 8); - gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4; - - icache_enable(); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = PHYS_SDRAM_SIZE_1; - - return 0; -} - -unsigned int addr_vall_arr[] = { - 0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */ - 0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */ - 0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ - 0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ - 0x80157020, 0x00000150, /* I2C 48MHz clock */ - 0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ - 0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ - 0xA03DF000, 0x0000000D, /* Clock for MTU Timers */ - 0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */ - 0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ - 0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ - 0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */ - 0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */ - 0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */ - 0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */ - 0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */ - 0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */ - 0x801571E4, 0x0000000C, /* PRCMU settings for B2R2, - PRCM_APE_RESETN_SET_REG */ - 0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */ - 0xA03FF000, 0x00000003, /* USB */ - 0xA03FF008, 0x00000001, /* USB */ - 0xA03FE00C, 0x00000000, /* USB */ - 0xA03FE020, 0x00000FFF, /* USB */ - 0xA03FE024, 0x00000000 /* USB */ -}; - -#ifdef CONFIG_BOARD_LATE_INIT -/* - * called after all initialisation were done, but before the generic - * mmc_initialize(). - */ -int board_late_init(void) -{ - uchar byte; - - /* - * Determine and set board_id environment variable - * 0: mop500, 1: href500 - * Above boards have different GPIO expander chips which we can - * distinguish by the chip id. - * - * The board_id environment variable is needed for the Linux bootargs. - */ - (void) i2c_set_bus_num(0); - (void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1); - if (byte == 0x01) { - board_id = 0; - setenv("board_id", "0"); - } else { - board_id = 1; - setenv("board_id", "1"); - } -#ifdef CONFIG_MMC - u8500_mmc_power_init(); - - /* - * config extended GPIO pins for level shifter and - * SDMMC_ENABLE - */ - if (board_id == 0) { - /* MOP500 */ - byte = 0x0c; - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1); - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1); - } else { - /* HREF */ - /* set the direction of GPIO KPY9 and KPY10 */ - byte = 0x06; - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1); - /* must be a multibyte access */ - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1, - (uchar []) {0x06, 0x06}, 2); - } -#endif /* CONFIG_MMC */ - /* - * Create a memargs variable which points uses either the memargs256 or - * memargs512 environment variable, depending on the memory size. - * memargs is used to build the bootargs, memargs256 and memargs512 are - * stored in the environment. - */ - if (gd->bd->bi_dram[0].size == 0x10000000) { - setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}"); - setenv("mem", "256M"); - } else { - setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}"); - setenv("mem", "512M"); - } - - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits) -{ - writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats); - writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis); -} - -static void init_regs(void) -{ - /* FIXME Remove magic register array settings for ED also */ - struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE; - - /* Enable timers */ - writel(1 << 17, &prcmu->tcr); - - u8500_prcmu_enable(&prcmu->per1clk_mgt); - u8500_prcmu_enable(&prcmu->per2clk_mgt); - u8500_prcmu_enable(&prcmu->per3clk_mgt); - u8500_prcmu_enable(&prcmu->per5clk_mgt); - u8500_prcmu_enable(&prcmu->per6clk_mgt); - u8500_prcmu_enable(&prcmu->per7clk_mgt); - - u8500_prcmu_enable(&prcmu->uartclk_mgt); - u8500_prcmu_enable(&prcmu->i2cclk_mgt); - - u8500_prcmu_enable(&prcmu->sdmmcclk_mgt); - - u8500_clock_enable(1, 9, -1); /* GPIO0 */ - - u8500_clock_enable(2, 11, -1); /* GPIO1 */ - - u8500_clock_enable(3, 8, -1); /* GPIO2 */ - u8500_clock_enable(5, 1, -1); /* GPIO3 */ - - u8500_clock_enable(3, 6, 6); /* UART2 */ - - gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0"); - u8500_clock_enable(3, 3, 3); /* I2C0 */ - - early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000); - gpio_altfuncenable(GPIO_ALT_UART_2, "UART2"); - - early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0); - gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC"); - - early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0); - gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD"); - - u8500_clock_enable(1, 5, 5); /* SDI0 */ - u8500_clock_enable(2, 4, 2); /* SDI4 */ - - u8500_clock_enable(6, 7, -1); /* MTU0 */ - u8500_clock_enable(3, 4, 4); /* SDI2 */ - - early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff); - gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC"); - - /* - * Enabling clocks for all devices which are AMBA devices in the - * kernel. Otherwise they will not get probe()'d because the - * peripheral ID register will not be powered. - */ - - /* XXX: some of these differ between ED/V1 */ - - u8500_clock_enable(1, 1, 1); /* UART1 */ - u8500_clock_enable(1, 0, 0); /* UART0 */ - - u8500_clock_enable(3, 2, 2); /* SSP1 */ - u8500_clock_enable(3, 1, 1); /* SSP0 */ - - u8500_clock_enable(2, 8, -1); /* SPI0 */ - u8500_clock_enable(2, 5, 3); /* MSP2 */ -} - -#ifdef CONFIG_MMC -static int u8500_mmci_board_init(void) -{ - enum gpio_error error; - struct gpio_register *gpio_base_address; - - gpio_base_address = (void *)(U8500_GPIO_0_BASE); - gpio_base_address->gpio_dats |= 0xFFC0000; - gpio_base_address->gpio_pdis &= ~0xFFC0000; - - /* save the GPIO0 AFSELA register */ - error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC"); - if (error != GPIO_OK) { - printf("u8500_mmci_board_init() gpio_altfuncenable failed\n"); - return -ENODEV; - } - return 0; -} - -int board_mmc_init(bd_t *bd) -{ - struct pl180_mmc_host *host; - - if (u8500_mmci_board_init()) - return -ENODEV; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - strcpy(host->name, "MMC"); - host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; - host->pwr_init = INIT_PWR; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; - host->voltages = VOLTAGE_WINDOW_MMC; - host->caps = 0; - host->clock_in = ARM_MCLK; - host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); - host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; - - return arm_pl180_mmci_init(host); -} -#endif - - -/* - * get_pll_freq_khz - return PLL frequency in kHz - */ -static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg) -{ - uint32_t idf, ldf, odf, seldiv, phi; - - /* - * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0 - * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1 - * where: - * IDF=R(2:0) (when R=000, IDF=1d) - * LDF = 2*D(7:0) (D must be greater than or equal to 6) - * ODF = N(5:0) (when N=000000, 0DF=1d) - */ - - idf = (freq_reg & 0x70000) >> 16; - ldf = (freq_reg & 0xff) * 2; - odf = (freq_reg & 0x3f00) >> 8; - seldiv = (freq_reg & 0x01000000) >> 24; - phi = (inclk_khz * ldf) / (2 * odf * idf); - if (seldiv) - phi = phi/2; - - return phi; -} - -int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uint32_t inclk_khz; - uint32_t reg, phi; - uint32_t clk_khz; - unsigned int clk_sel; - struct clk_mgt_regs *clks = clk_mgt_regs; - struct pll_freq_regs *plls = pll_freq_regs; - - /* - * Go through list of PLLs. - * Initialise pll out frequency array (pll_khz) and print frequency. - */ - inclk_khz = 38400; /* 38.4 MHz */ - while (plls->addr) { - reg = readl(plls->addr); - phi = get_pll_freq_khz(inclk_khz, reg); - pll_khz[plls->idx] = phi; - printf("%s PLL out frequency: %d.%d Mhz\n", - pll_name[plls->idx], phi/1000, phi % 1000); - plls++; - } - - /* check ARM clock source */ - reg = readl(PRCM_ARM_CHGCLKREQ_REG); - printf("A9 running on %s\n", - (reg & 1) ? "external clock" : "ARM PLL"); - - /* go through list of clk_mgt_reg */ - printf("\n%19s %9s %7s %9s enabled\n", - "name(addr)", "value", "PLL", "CLK[MHz]"); - while (clks->addr) { - reg = readl(clks->addr); - - /* convert bit position into array index */ - clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */ - - if (reg & 0x200) - clk_khz = 38400; /* CLK38 is set */ - else if ((reg & 0x1f) == 0) - /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */ - clk_khz = 0; - else - clk_khz = pll_khz[clk_sel] / (reg & 0x1f); - - printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n", - clks->descr, clks->addr, reg, pll_name[clk_sel], - clk_khz / 1000, clk_khz % 1000, - (reg & 0x100) ? "ena" : "dis"); - clks++; - } - - return 0; -} - -U_BOOT_CMD( - clkinfo, 1, 1, do_clkinfo, - "print clock info", - "" -); diff --git a/configs/snowball_defconfig b/configs/snowball_defconfig deleted file mode 100644 index e73bc48..0000000 --- a/configs/snowball_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_SNOWBALL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U8500 $ " diff --git a/configs/u8500_href_defconfig b/configs/u8500_href_defconfig deleted file mode 100644 index 0aebc78..0000000 --- a/configs/u8500_href_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_U8500_HREF=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U8500 $ " diff --git a/include/configs/snowball.h b/include/configs/snowball.h deleted file mode 100644 index de03e76..0000000 --- a/include/configs/snowball.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * #define DEBUG 1 - */ - -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SNOWBALL -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_LATE_INIT - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -/*----------------------------------------------------------------------- - * Size of environment and malloc() pool - */ -/* - * If you use U-Boot as crash kernel, make sure that it does not overwrite - * information saved by kexec during panic. Kexec expects the start - * address of the executable 32K above "crashkernel" address. - */ -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (8*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_CMD_ENV -#define CONFIG_ENV_OFFSET 0x0118000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ -"mmc dev 1; " \ - "if run loadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run mmcload; " \ - "then run mmcboot; " \ - "else " \ - "mmc dev 0; " \ - "if run emmcloadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run emmcload; " \ - "then run emmcboot; " \ - "else " \ - "echo No media to boot from; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "fi; " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \ - "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript " \ - "from mmc ...; source ${loadaddr}\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \ - "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \ - "mem=64M@160M mem_mali=32M@224M " \ - "pmem_hwb=128M@256M mem=128M@384M\0" \ - "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \ - "hwmem=168M@M160M mem=48M@328M " \ - "mem_issw=1M@383M mem=640M@384M\0" \ - "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \ - "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \ - "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \ - "commonargs=setenv bootargs console=${console} " \ - "vmalloc=300M\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p3 " \ - "rootwait\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "mmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk1p2 " \ - "rootwait earlyprintk\0" \ - "mmcboot=echo Booting from external MMC ...; " \ - "run commonargs mmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "fdt_high=0x2BC00000\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - */ -#define CONFIG_ARM_PL180_MMCI -#define MMC_BLOCK_SIZE 512 -#define CFG_EMMC_BASE 0x80114000 -#define CFG_MMC_BASE 0x80126000 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ - - -/* - * U8500 GPIO register base for 9 banks - */ -#define CONFIG_DB8500_GPIO -#define CFG_GPIO_0_BASE 0x8012E000 -#define CFG_GPIO_1_BASE 0x8012E080 -#define CFG_GPIO_2_BASE 0x8000E000 -#define CFG_GPIO_3_BASE 0x8000E080 -#define CFG_GPIO_4_BASE 0x8000E100 -#define CFG_GPIO_5_BASE 0x8000E180 -#define CFG_GPIO_6_BASE 0x8011E000 -#define CFG_GPIO_7_BASE 0x8011E080 -#define CFG_GPIO_8_BASE 0xA03FE000 - -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h deleted file mode 100644 index a8cc030..0000000 --- a/include/configs/u8500_href.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -/* - * Size of malloc() pool - */ -#ifdef CONFIG_BOOT_SRAM -#define CONFIG_ENV_SIZE (32*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64*1024) -#else -#define CONFIG_ENV_SIZE (128*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#endif - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_I2C - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND "run emmcboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M " \ - "pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M " \ - "pmem=22M@172M mem=30M@194M mem_mali=32M@224M " \ - "pmem_hwb=54M@256M mem=202M@310M\0" \ - "commonargs=setenv bootargs cachepolicy=writealloc noinitrd " \ - "init=init " \ - "board_id=${board_id} " \ - "logo.${logo} " \ - "startup_graphics=${startup_graphics}\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p2 " \ - "rootdelay=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs addcons memargs;" \ - "mmc read 0 ${loadaddr} 0xA0000 0x4000;" \ - "bootm ${loadaddr}\0" \ - "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;" \ - "source ${loadaddr}\0" \ - "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0" \ - "usbtty=cdc_acm\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ - -/* - * I2C - */ -#define CONFIG_U8500_I2C -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */ -#define CONFIG_SYS_U8500_I2C0_BASE 0x80004000 -#define CONFIG_SYS_U8500_I2C1_BASE 0x80122000 -#define CONFIG_SYS_U8500_I2C2_BASE 0x80128000 -#define CONFIG_SYS_U8500_I2C3_BASE 0x80110000 -#define CONFIG_SYS_U8500_I2C_BUS_MAX 4 - -#define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */ -#define CONFIG_TC35892_GPIO - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ -#define PHYS_SDRAM_SIZE_1 0x20000000 /* 512 MB */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - * NB Only externa SD slot is currently supported - */ -#define MMC_BLOCK_SIZE 512 -#define CONFIG_ARM_PL180_MMCI -#define CONFIG_ARM_PL180_MMCI_BASE 0x80126000 /* MMC base for 8500 */ -#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 -#define CONFIG_MMC_DEV_NUM 1 - -#define CONFIG_CMD_ENV -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x13F80000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock - management unit */ -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */

These boards have not been converted to generic board by the deadline. Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie, sffsdr, sonata.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/mach-davinci/Kconfig | 36 ---- board/davinci/dm355evm/Kconfig | 12 -- board/davinci/dm355evm/MAINTAINERS | 6 - board/davinci/dm355evm/Makefile | 10 - board/davinci/dm355evm/config.mk | 11 - board/davinci/dm355evm/dm355evm.c | 144 ------------- board/davinci/dm355leopard/Kconfig | 12 -- board/davinci/dm355leopard/MAINTAINERS | 6 - board/davinci/dm355leopard/Makefile | 10 - board/davinci/dm355leopard/config.mk | 6 - board/davinci/dm355leopard/dm355leopard.c | 86 -------- board/davinci/dm365evm/Kconfig | 12 -- board/davinci/dm365evm/MAINTAINERS | 6 - board/davinci/dm365evm/Makefile | 10 - board/davinci/dm365evm/config.mk | 11 - board/davinci/dm365evm/dm365evm.c | 139 ------------ board/davinci/dm6467evm/Kconfig | 12 -- board/davinci/dm6467evm/MAINTAINERS | 7 - board/davinci/dm6467evm/Makefile | 10 - board/davinci/dm6467evm/config.mk | 2 - board/davinci/dm6467evm/dm6467evm.c | 76 ------- board/davinci/dvevm/Kconfig | 12 -- board/davinci/dvevm/MAINTAINERS | 6 - board/davinci/dvevm/Makefile | 11 - board/davinci/dvevm/board_init.S | 16 -- board/davinci/dvevm/config.mk | 39 ---- board/davinci/dvevm/dvevm.c | 91 -------- board/davinci/ea20/Kconfig | 12 -- board/davinci/ea20/MAINTAINERS | 6 - board/davinci/ea20/Makefile | 10 - board/davinci/ea20/ea20.c | 339 ------------------------------ board/davinci/schmoogie/Kconfig | 12 -- board/davinci/schmoogie/MAINTAINERS | 6 - board/davinci/schmoogie/Makefile | 11 - board/davinci/schmoogie/board_init.S | 16 -- board/davinci/schmoogie/config.mk | 39 ---- board/davinci/schmoogie/schmoogie.c | 119 ----------- board/davinci/sffsdr/Kconfig | 12 -- board/davinci/sffsdr/MAINTAINERS | 6 - board/davinci/sffsdr/Makefile | 11 - board/davinci/sffsdr/board_init.S | 16 -- board/davinci/sffsdr/config.mk | 23 -- board/davinci/sffsdr/sffsdr.c | 132 ------------ board/davinci/sonata/Kconfig | 12 -- board/davinci/sonata/MAINTAINERS | 6 - board/davinci/sonata/Makefile | 11 - board/davinci/sonata/board_init.S | 87 -------- board/davinci/sonata/config.mk | 39 ---- board/davinci/sonata/sonata.c | 87 -------- configs/davinci_dm355evm_defconfig | 9 - configs/davinci_dm355leopard_defconfig | 9 - configs/davinci_dm365evm_defconfig | 9 - configs/davinci_dm6467Tevm_defconfig | 9 - configs/davinci_dm6467evm_defconfig | 10 - configs/davinci_dvevm_defconfig | 9 - configs/davinci_schmoogie_defconfig | 9 - configs/davinci_sffsdr_defconfig | 9 - configs/davinci_sonata_defconfig | 7 - configs/ea20_defconfig | 8 - include/configs/davinci_dm355evm.h | 195 ----------------- include/configs/davinci_dm355leopard.h | 140 ------------ include/configs/davinci_dm365evm.h | 220 ------------------- include/configs/davinci_dm6467evm.h | 138 ------------ include/configs/davinci_dvevm.h | 216 ------------------- include/configs/davinci_schmoogie.h | 136 ------------ include/configs/davinci_sffsdr.h | 129 ------------ include/configs/davinci_sonata.h | 187 ---------------- include/configs/ea20.h | 308 --------------------------- 68 files changed, 3568 deletions(-) delete mode 100644 board/davinci/dm355evm/Kconfig delete mode 100644 board/davinci/dm355evm/MAINTAINERS delete mode 100644 board/davinci/dm355evm/Makefile delete mode 100644 board/davinci/dm355evm/config.mk delete mode 100644 board/davinci/dm355evm/dm355evm.c delete mode 100644 board/davinci/dm355leopard/Kconfig delete mode 100644 board/davinci/dm355leopard/MAINTAINERS delete mode 100644 board/davinci/dm355leopard/Makefile delete mode 100644 board/davinci/dm355leopard/config.mk delete mode 100644 board/davinci/dm355leopard/dm355leopard.c delete mode 100644 board/davinci/dm365evm/Kconfig delete mode 100644 board/davinci/dm365evm/MAINTAINERS delete mode 100644 board/davinci/dm365evm/Makefile delete mode 100644 board/davinci/dm365evm/config.mk delete mode 100644 board/davinci/dm365evm/dm365evm.c delete mode 100644 board/davinci/dm6467evm/Kconfig delete mode 100644 board/davinci/dm6467evm/MAINTAINERS delete mode 100644 board/davinci/dm6467evm/Makefile delete mode 100644 board/davinci/dm6467evm/config.mk delete mode 100644 board/davinci/dm6467evm/dm6467evm.c delete mode 100644 board/davinci/dvevm/Kconfig delete mode 100644 board/davinci/dvevm/MAINTAINERS delete mode 100644 board/davinci/dvevm/Makefile delete mode 100644 board/davinci/dvevm/board_init.S delete mode 100644 board/davinci/dvevm/config.mk delete mode 100644 board/davinci/dvevm/dvevm.c delete mode 100644 board/davinci/ea20/Kconfig delete mode 100644 board/davinci/ea20/MAINTAINERS delete mode 100644 board/davinci/ea20/Makefile delete mode 100644 board/davinci/ea20/ea20.c delete mode 100644 board/davinci/schmoogie/Kconfig delete mode 100644 board/davinci/schmoogie/MAINTAINERS delete mode 100644 board/davinci/schmoogie/Makefile delete mode 100644 board/davinci/schmoogie/board_init.S delete mode 100644 board/davinci/schmoogie/config.mk delete mode 100644 board/davinci/schmoogie/schmoogie.c delete mode 100644 board/davinci/sffsdr/Kconfig delete mode 100644 board/davinci/sffsdr/MAINTAINERS delete mode 100644 board/davinci/sffsdr/Makefile delete mode 100644 board/davinci/sffsdr/board_init.S delete mode 100644 board/davinci/sffsdr/config.mk delete mode 100644 board/davinci/sffsdr/sffsdr.c delete mode 100644 board/davinci/sonata/Kconfig delete mode 100644 board/davinci/sonata/MAINTAINERS delete mode 100644 board/davinci/sonata/Makefile delete mode 100644 board/davinci/sonata/board_init.S delete mode 100644 board/davinci/sonata/config.mk delete mode 100644 board/davinci/sonata/sonata.c delete mode 100644 configs/davinci_dm355evm_defconfig delete mode 100644 configs/davinci_dm355leopard_defconfig delete mode 100644 configs/davinci_dm365evm_defconfig delete mode 100644 configs/davinci_dm6467Tevm_defconfig delete mode 100644 configs/davinci_dm6467evm_defconfig delete mode 100644 configs/davinci_dvevm_defconfig delete mode 100644 configs/davinci_schmoogie_defconfig delete mode 100644 configs/davinci_sffsdr_defconfig delete mode 100644 configs/davinci_sonata_defconfig delete mode 100644 configs/ea20_defconfig delete mode 100644 include/configs/davinci_dm355evm.h delete mode 100644 include/configs/davinci_dm355leopard.h delete mode 100644 include/configs/davinci_dm365evm.h delete mode 100644 include/configs/davinci_dm6467evm.h delete mode 100644 include/configs/davinci_dvevm.h delete mode 100644 include/configs/davinci_schmoogie.h delete mode 100644 include/configs/davinci_sffsdr.h delete mode 100644 include/configs/davinci_sonata.h delete mode 100644 include/configs/ea20.h

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 681270d..790d177 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -22,33 +22,6 @@ config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" select SUPPORT_SPL

-config TARGET_DAVINCI_DM355EVM - bool "DM355 EVM board" - -config TARGET_DAVINCI_DM355LEOPARD - bool "DM355 Leopard board" - -config TARGET_DAVINCI_DM365EVM - bool "DM365 EVM board" - -config TARGET_DAVINCI_DM6467EVM - bool "DM6467 EVM board" - -config TARGET_DAVINCI_DVEVM - bool "DVEVM board" - -config TARGET_EA20 - bool "EA20 board" - -config TARGET_DAVINCI_SCHMOOGIE - bool "Schmoogie board" - -config TARGET_DAVINCI_SFFSDR - bool "SFFSDR board" - -config TARGET_DAVINCI_SONATA - bool "Sonata board" - config TARGET_CALIMAIN bool "Calimain board"

@@ -60,15 +33,6 @@ config SYS_SOC source "board/enbw/enbw_cmc/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" -source "board/davinci/dm355evm/Kconfig" -source "board/davinci/dm355leopard/Kconfig" -source "board/davinci/dm365evm/Kconfig" -source "board/davinci/dm6467evm/Kconfig" -source "board/davinci/dvevm/Kconfig" -source "board/davinci/ea20/Kconfig" -source "board/davinci/schmoogie/Kconfig" -source "board/davinci/sffsdr/Kconfig" -source "board/davinci/sonata/Kconfig" source "board/omicron/calimain/Kconfig"

endif diff --git a/board/davinci/dm355evm/Kconfig b/board/davinci/dm355evm/Kconfig deleted file mode 100644 index ec2c276..0000000 --- a/board/davinci/dm355evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM355EVM - -config SYS_BOARD - default "dm355evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm355evm" - -endif diff --git a/board/davinci/dm355evm/MAINTAINERS b/board/davinci/dm355evm/MAINTAINERS deleted file mode 100644 index c017e09..0000000 --- a/board/davinci/dm355evm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM355EVM BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm355evm/ -F: include/configs/davinci_dm355evm.h -F: configs/davinci_dm355evm_defconfig diff --git a/board/davinci/dm355evm/Makefile b/board/davinci/dm355evm/Makefile deleted file mode 100644 index bcb7e6f..0000000 --- a/board/davinci/dm355evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm355evm.o diff --git a/board/davinci/dm355evm/config.mk b/board/davinci/dm355evm/config.mk deleted file mode 100644 index 9a06300..0000000 --- a/board/davinci/dm355evm/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Spectrum Digital DM355 EVM board -# dm355evm board has 1 bank of 128 MB DDR RAM -# Physical Address: 8000'0000 to 8800'0000 -# -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c deleted file mode 100644 index e5a958f..0000000 --- a/board/davinci/dm355evm/dm355evm.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> -#include <net.h> -#include <netdev.h> -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * With the DM355 EVM, u-boot is *always* a third stage loader, - * unless a JTAG debugger handles the first two stages: - * - * - 1st stage is ROM Boot Loader (RBL), which searches for a - * second stage loader in one of three places based on SW7: - * NAND (with MMC/SD fallback), MMC/SD, or UART. - * - * - 2nd stage is User Boot Loader (UBL), using at most 30KB - * of on-chip SRAM, responsible for lowlevel init, and for - * loading the third stage loader into DRAM. - * - * - 3rd stage, that's us! - */ - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* We expect the UBL to have handled "lowlevel init", which - * involves setting up at least: - * - clocks - * + PLL1 (for ARM and peripherals) and PLL2 (for DDR) - * + clock divisors for those PLLs - * + LPSC_DDR module enabled - * + LPSC_TIMER0 module (still) enabled - * - EMIF - * + DDR init and timings - * + AEMIF timings (for NAND and DM9000) - * - pinmux - * - * Some of that is repeated here, mostly as a precaution. - */ - - /* AEMIF: Some "address" lines are available as GPIOs. A3..A13 - * could be too if we used A12 as a GPIO during NAND chipselect - * (and Linux did too), letting us control the LED on A7/GPIO61. - */ - REG(PINMUX2) = 0x0c08; - - /* UART0 may still be in SyncReset if we didn't boot from UART */ - davinci_enable_uart0(); - - /* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */ - lpsc_on(DAVINCI_LPSC_TPCC); - lpsc_on(DAVINCI_LPSC_TPTC0); - lpsc_on(DAVINCI_LPSC_TPTC1); - - return 0; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_NAND_DAVINCI - -static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - unsigned long wbase = (unsigned long) this->IO_ADDR_W; - unsigned long rbase = (unsigned long) this->IO_ADDR_R; - - if (chip == 1) { - __set_bit(14, &wbase); - __set_bit(14, &rbase); - } else { - __clear_bit(14, &wbase); - __clear_bit(14, &rbase); - } - this->IO_ADDR_W = (void *)wbase; - this->IO_ADDR_R = (void *)rbase; -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_dm355evm_select_chip; - return 0; -} - -#endif - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .input_clk = 108000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_1, -}; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 108000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_1, -}; -#endif - -int board_mmc_init(bd_t *bis) -{ - int err; - - /* Add slot-0 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd0); - if (err) - return err; - -#ifdef CONFIG_DAVINCI_MMC_SD1 - /* Add slot-1 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd1); -#endif - - return err; -} -#endif diff --git a/board/davinci/dm355leopard/Kconfig b/board/davinci/dm355leopard/Kconfig deleted file mode 100644 index ab4230a..0000000 --- a/board/davinci/dm355leopard/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM355LEOPARD - -config SYS_BOARD - default "dm355leopard" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm355leopard" - -endif diff --git a/board/davinci/dm355leopard/MAINTAINERS b/board/davinci/dm355leopard/MAINTAINERS deleted file mode 100644 index ed04d43..0000000 --- a/board/davinci/dm355leopard/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM355LEOPARD BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm355leopard/ -F: include/configs/davinci_dm355leopard.h -F: configs/davinci_dm355leopard_defconfig diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile deleted file mode 100644 index 7035429..0000000 --- a/board/davinci/dm355leopard/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm355leopard.o diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk deleted file mode 100644 index 28ff3f3..0000000 --- a/board/davinci/dm355leopard/config.mk +++ /dev/null @@ -1,6 +0,0 @@ -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c deleted file mode 100644 index 53902f9..0000000 --- a/board/davinci/dm355leopard/dm355leopard.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/gpio.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> -#include <net.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - struct davinci_gpio *gpio01_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK01; - struct davinci_gpio *gpio23_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK23; - struct davinci_gpio *gpio67_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK67; - - gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* GIO 9 & 10 are used for IO */ - writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3); - - /* Interrupt set GIO 9 */ - writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN); - - /* set GIO 9 input */ - writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir); - - /* Both edge trigger GIO 9 */ - writel((readl(&gpio01_base->set_rising) | (1 << 9)), - &gpio01_base->set_rising); - writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir); - - /* output low */ - writel((readl(&gpio01_base->set_data) & ~(1 << 5)), - &gpio01_base->set_data); - - /* set GIO 10 output */ - writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir); - - /* output high */ - writel((readl(&gpio01_base->set_data) | (1 << 10)), - &gpio01_base->set_data); - - /* set GIO 32 output */ - writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir); - - /* output High */ - writel((readl(&gpio23_base->set_data) | (1 << 0)), - &gpio23_base->set_data); - - /* Enable UART1 MUX Lines */ - writel((readl(PINMUX0) & ~3), PINMUX0); - writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir); - writel((readl(&gpio67_base->set_data) | (1 << 6)), - &gpio67_base->set_data); - - return 0; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif diff --git a/board/davinci/dm365evm/Kconfig b/board/davinci/dm365evm/Kconfig deleted file mode 100644 index 724c7b6..0000000 --- a/board/davinci/dm365evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM365EVM - -config SYS_BOARD - default "dm365evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm365evm" - -endif diff --git a/board/davinci/dm365evm/MAINTAINERS b/board/davinci/dm365evm/MAINTAINERS deleted file mode 100644 index 97c3ed3..0000000 --- a/board/davinci/dm365evm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM365EVM BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm365evm/ -F: include/configs/davinci_dm365evm.h -F: configs/davinci_dm365evm_defconfig diff --git a/board/davinci/dm365evm/Makefile b/board/davinci/dm365evm/Makefile deleted file mode 100644 index d35d81c..0000000 --- a/board/davinci/dm365evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm365evm.o diff --git a/board/davinci/dm365evm/config.mk b/board/davinci/dm365evm/config.mk deleted file mode 100644 index 7b1e900..0000000 --- a/board/davinci/dm365evm/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Spectrum Digital DM365 EVM board -# DM365 EVM board has 1 bank of 128 MB DDR RAM -# Physical Address: 8000'0000 to 8800'0000 -# -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c deleted file mode 100644 index 24bec56..0000000 --- a/board/davinci/dm365evm/dm365evm.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/gpio.h> -#include <netdev.h> -#include <asm/arch/davinci_misc.h> -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM365_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC -int board_eth_init(bd_t *bis) -{ - uint8_t eeprom_enetaddr[6]; - int i; - struct davinci_gpio *gpio1_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK01; - - /* Configure PINMUX 3 to enable EMAC pins */ - writel((readl(PINMUX3) | 0x1affff), PINMUX3); - - /* Configure GPIO20 as output */ - writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir); - - /* Toggle GPIO 20 */ - for (i = 0; i < 20; i++) { - /* GPIO 20 low */ - writel((readl(&gpio1_base->out_data) & ~(1 << 20)), - &gpio1_base->out_data); - - udelay(1000); - - /* GPIO 20 high */ - writel((readl(&gpio1_base->out_data) | (1 << 20)), - &gpio1_base->out_data); - } - - /* Configure I2C pins so that EEPROM can be read */ - writel((readl(PINMUX3) | 0x01400000), PINMUX3); - - /* Read Ethernet MAC address from EEPROM */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - davinci_emac_initialize(); - - return 0; -} -#endif - -#ifdef CONFIG_NAND_DAVINCI -static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - unsigned long wbase = (unsigned long) this->IO_ADDR_W; - unsigned long rbase = (unsigned long) this->IO_ADDR_R; - - if (chip == 1) { - __set_bit(14, &wbase); - __set_bit(14, &rbase); - } else { - __clear_bit(14, &wbase); - __clear_bit(14, &rbase); - } - this->IO_ADDR_W = (void *)wbase; - this->IO_ADDR_R = (void *)rbase; -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_dm365evm_select_chip; - return 0; -} -#endif - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .input_clk = 121500000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 121500000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; -#endif - -int board_mmc_init(bd_t *bis) -{ - int err; - - /* Add slot-0 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd0); - if (err) - return err; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -#define PUPDCTL1 0x01c4007c - /* PINMUX(4)-DAT0-3/CMD; PINMUX(0)-CLK */ - writel((readl(PINMUX4) | 0x55400000), PINMUX4); - writel((readl(PINMUX0) | 0x00010000), PINMUX0); - - /* Configure MMC/SD pins as pullup */ - writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1); - - /* Add slot-1 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd1); -#endif - - return err; -} -#endif diff --git a/board/davinci/dm6467evm/Kconfig b/board/davinci/dm6467evm/Kconfig deleted file mode 100644 index 56d2ab4..0000000 --- a/board/davinci/dm6467evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM6467EVM - -config SYS_BOARD - default "dm6467evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm6467evm" - -endif diff --git a/board/davinci/dm6467evm/MAINTAINERS b/board/davinci/dm6467evm/MAINTAINERS deleted file mode 100644 index 8ca53c4..0000000 --- a/board/davinci/dm6467evm/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -DM6467EVM BOARD -#M: Sandeep Paulraj s-paulraj@ti.com -S: Orphan (since 2014-08) -F: board/davinci/dm6467evm/ -F: include/configs/davinci_dm6467evm.h -F: configs/davinci_dm6467evm_defconfig -F: configs/davinci_dm6467Tevm_defconfig diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile deleted file mode 100644 index acbbdd5..0000000 --- a/board/davinci/dm6467evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm6467evm.o diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk deleted file mode 100644 index 3751043..0000000 --- a/board/davinci/dm6467evm/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c deleted file mode 100644 index e51cc9e..0000000 --- a/board/davinci/dm6467evm/dm6467evm.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/io.h> -#include <nand.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define REV_DM6467EVM 0 -#define REV_DM6467TEVM 1 -/* - * get_board_rev() - setup to pass kernel board revision information - * Returns: - * bit[0-3] System clock frequency - * 0000b - 27 MHz - * 0001b - 33 MHz - */ -u32 get_board_rev(void) -{ - -#ifdef CONFIG_DAVINCI_DM6467TEVM - return REV_DM6467TEVM; -#else - return REV_DM6467EVM; -#endif - -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - lpsc_on(DAVINCI_DM646X_LPSC_TIMER0); - lpsc_on(DAVINCI_DM646X_LPSC_UART0); - lpsc_on(DAVINCI_DM646X_LPSC_I2C); - lpsc_on(DAVINCI_DM646X_LPSC_EMAC); - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0x80000c0; - - /* Select UART function on UART0 */ - REG(PINMUX0) &= ~(0x0000003f << 18); - REG(PINMUX1) &= ~(0x00000003); - - return 0; -} - -#if defined(CONFIG_DRIVER_TI_EMAC) - -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif diff --git a/board/davinci/dvevm/Kconfig b/board/davinci/dvevm/Kconfig deleted file mode 100644 index 3f0ef82..0000000 --- a/board/davinci/dvevm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DVEVM - -config SYS_BOARD - default "dvevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dvevm" - -endif diff --git a/board/davinci/dvevm/MAINTAINERS b/board/davinci/dvevm/MAINTAINERS deleted file mode 100644 index a718b90..0000000 --- a/board/davinci/dvevm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DVEVM BOARD -#M: - -S: Maintained -F: board/davinci/dvevm/ -F: include/configs/davinci_dvevm.h -F: configs/davinci_dvevm_defconfig diff --git a/board/davinci/dvevm/Makefile b/board/davinci/dvevm/Makefile deleted file mode 100644 index 7ade325..0000000 --- a/board/davinci/dvevm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dvevm.o -obj-y += board_init.o diff --git a/board/davinci/dvevm/board_init.S b/board/davinci/dvevm/board_init.S deleted file mode 100644 index ded0590..0000000 --- a/board/davinci/dvevm/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/dvevm/config.mk b/board/davinci/dvevm/config.mk deleted file mode 100644 index ed80707..0000000 --- a/board/davinci/dvevm/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan swami.iyer@ti.com -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c deleted file mode 100644 index c34bde4..0000000 --- a/board/davinci/dvevm/dvevm.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - lpsc_on(DAVINCI_LPSC_USB); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - uint8_t video_mode; - uint8_t eeprom_enetaddr[6]; - - /* Read Ethernet MAC address from EEPROM if available. */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - i2c_read(0x39, 0x00, 1, &video_mode, 1); - - setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc")); - - return(0); -} - -#ifdef CONFIG_USB_DAVINCI - -/* IO Expander I2C address and USB VBUS enable mask */ -#define IOEXP_I2C_ADDR 0x3A -#define IOEXP_VBUSEN_MASK 1 - -/* - * This function enables USB VBUS by writting to IO expander using I2C. - * Note that the I2C is already initialized at this stage. This - * function is used by davinci specific USB wrapper code. - */ -void enable_vbus(void) -{ - uchar data; /* IO Expander data to enable VBUS */ - - /* Write to IO expander to enable VBUS */ - i2c_read(IOEXP_I2C_ADDR, 0, 0, &data, 1); - data &= ~IOEXP_VBUSEN_MASK; - i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1); -} -#endif diff --git a/board/davinci/ea20/Kconfig b/board/davinci/ea20/Kconfig deleted file mode 100644 index ae5b16e..0000000 --- a/board/davinci/ea20/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_EA20 - -config SYS_BOARD - default "ea20" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "ea20" - -endif diff --git a/board/davinci/ea20/MAINTAINERS b/board/davinci/ea20/MAINTAINERS deleted file mode 100644 index 5c300a3..0000000 --- a/board/davinci/ea20/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -EA20 BOARD -M: Stefano Babic sbabic@denx.de -S: Maintained -F: board/davinci/ea20/ -F: include/configs/ea20.h -F: configs/ea20_defconfig diff --git a/board/davinci/ea20/Makefile b/board/davinci/ea20/Makefile deleted file mode 100644 index a5311c4..0000000 --- a/board/davinci/ea20/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ea20.o diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c deleted file mode 100644 index 66804d7..0000000 --- a/board/davinci/ea20/ea20.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de - * - * Based on da850evm.c, original Copyrights follow: - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on da830evm.c. Original Copyrights follow: - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. nick.thompson@gefanuc.com - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <net.h> -#include <netdev.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/emac_defs.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> -#include <asm/gpio.h> -#include "../../../drivers/video/da8xx-fb.h" - -DECLARE_GLOBAL_DATA_PTR; - -static const struct da8xx_panel lcd_panel = { - /* Casio COM57H531x */ - .name = "Casio_COM57H531x", - .width = 640, - .height = 480, - .hfp = 12, - .hbp = 144, - .hsw = 30, - .vfp = 10, - .vbp = 35, - .vsw = 3, - .pxl_clk = 25000000, - .invert_pxl_clk = 0, -}; - -static const struct display_panel disp_panel = { - QVGA, - 16, - 16, - COLOR_ACTIVE, -}; - -static const struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias = 255, - .ac_bias_intrpt = 0, - .dma_burst_sz = 16, - .bpp = 16, - .fdd = 255, - .tft_alt_mode = 0, - .stn_565_mode = 0, - .mono_8bit_mode = 0, - .invert_line_clock = 1, - .invert_frm_clock = 1, - .sync_edge = 0, - .sync_ctrl = 1, - .raster_order = 0, -}; - -/* SPI0 pin muxer settings */ -static const struct pinmux_config spi1_pins[] = { - { pinmux(5), 1, 1 }, - { pinmux(5), 1, 2 }, - { pinmux(5), 1, 4 }, - { pinmux(5), 1, 5 } -}; - -/* I2C pin muxer settings */ -static const struct pinmux_config i2c_pins[] = { - { pinmux(4), 2, 2 }, - { pinmux(4), 2, 3 } -}; - -/* UART0 pin muxer settings */ -static const struct pinmux_config uart_pins[] = { - { pinmux(3), 2, 7 }, - { pinmux(3), 2, 6 }, - { pinmux(3), 2, 4 }, - { pinmux(3), 2, 5 } -}; - -#ifdef CONFIG_DRIVER_TI_EMAC -#define HAS_RMII 1 -static const struct pinmux_config emac_pins[] = { - { pinmux(14), 8, 2 }, - { pinmux(14), 8, 3 }, - { pinmux(14), 8, 4 }, - { pinmux(14), 8, 5 }, - { pinmux(14), 8, 6 }, - { pinmux(14), 8, 7 }, - { pinmux(15), 8, 1 }, - { pinmux(4), 8, 0 }, - { pinmux(4), 8, 1 } -}; -#endif - -#ifdef CONFIG_NAND_DAVINCI -const struct pinmux_config nand_pins[] = { - { pinmux(7), 1, 0}, /* CS2 */ - { pinmux(7), 0, 1}, /* CS3 in three state*/ - { pinmux(7), 1, 4 }, /* EMA_WE */ - { pinmux(7), 1, 5 }, /* EMA_OE */ - { pinmux(9), 1, 0 }, /* EMA_D[7] */ - { pinmux(9), 1, 1 }, /* EMA_D[6] */ - { pinmux(9), 1, 2 }, /* EMA_D[5] */ - { pinmux(9), 1, 3 }, /* EMA_D[4] */ - { pinmux(9), 1, 4 }, /* EMA_D[3] */ - { pinmux(9), 1, 5 }, /* EMA_D[2] */ - { pinmux(9), 1, 6 }, /* EMA_D[1] */ - { pinmux(9), 1, 7 }, /* EMA_D[0] */ - { pinmux(12), 1, 5 }, /* EMA_A[2] */ - { pinmux(12), 1, 6 }, /* EMA_A[1] */ - { pinmux(6), 1, 0 } /* EMA_CLK */ -}; -#endif - -const struct pinmux_config gpio_pins[] = { - { pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/ - { pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/ - { pinmux(13), 8, 3 }, /* GPIO6[12] U0_SW1 on EA20-00101_2*/ - { pinmux(19), 8, 5 }, /* GPIO6[1] DISP_ON */ - { pinmux(14), 8, 1 } /* GPIO6[6] LCD_B_PWR*/ -}; - -const struct pinmux_config lcd_pins[] = { - { pinmux(17), 2, 1 }, /* LCD_D_0 */ - { pinmux(17), 2, 0 }, /* LCD_D_1 */ - { pinmux(16), 2, 7 }, /* LCD_D_2 */ - { pinmux(16), 2, 6 }, /* LCD_D_3 */ - { pinmux(16), 2, 5 }, /* LCD_D_4 */ - { pinmux(16), 2, 4 }, /* LCD_D_5 */ - { pinmux(16), 2, 3 }, /* LCD_D_6 */ - { pinmux(16), 2, 2 }, /* LCD_D_7 */ - { pinmux(18), 2, 1 }, /* LCD_D_8 */ - { pinmux(18), 2, 0 }, /* LCD_D_9 */ - { pinmux(17), 2, 7 }, /* LCD_D_10 */ - { pinmux(17), 2, 6 }, /* LCD_D_11 */ - { pinmux(17), 2, 5 }, /* LCD_D_12 */ - { pinmux(17), 2, 4 }, /* LCD_D_13 */ - { pinmux(17), 2, 3 }, /* LCD_D_14 */ - { pinmux(17), 2, 2 }, /* LCD_D_15 */ - { pinmux(18), 2, 6 }, /* LCD_PCLK */ - { pinmux(19), 2, 0 }, /* LCD_HSYNC */ - { pinmux(19), 2, 1 }, /* LCD_VSYNC */ - { pinmux(19), 2, 6 }, /* DA850_NLCD_AC_ENB_CS */ -}; - -const struct pinmux_config halten_pin[] = { - { pinmux(3), 4, 2 } /* GPIO8[6] HALTEN */ -}; - -static const struct pinmux_resource pinmuxes[] = { -#ifdef CONFIG_SPI_FLASH - PINMUX_ITEM(spi1_pins), -#endif - PINMUX_ITEM(uart_pins), - PINMUX_ITEM(i2c_pins), -#ifdef CONFIG_NAND_DAVINCI - PINMUX_ITEM(nand_pins), -#endif -#ifdef CONFIG_VIDEO - PINMUX_ITEM(lcd_pins), -#endif -}; - -static const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ - { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ - { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART0 }, /* console */ - { DAVINCI_LPSC_GPIO }, - { DAVINCI_LPSC_LCDC }, /* LCD */ -}; - -int board_early_init_f(void) -{ - /* PinMux for GPIO */ - if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0) - return 1; - - /* Set DISP_ON high to enable LCD output*/ - gpio_direction_output(97, 1); - - /* Set the RESETOUTn low */ - gpio_direction_output(111, 0); - - /* Set U0_SW0 low for UART0 as console*/ - gpio_direction_output(106, 0); - - /* Set U0_SW1 low for UART0 as console*/ - gpio_direction_output(108, 0); - - /* Set LCD_B_PWR low to power down LCD Backlight*/ - gpio_direction_output(102, 0); - -#ifndef CONFIG_USE_IRQ - irq_init(); -#endif - - /* - * NAND CS setup - cycle counts based on da850evm NAND timings in the - * Linux kernel @ 25MHz EMIFA - */ -#ifdef CONFIG_NAND_DAVINCI - writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(1) | - DAVINCI_ABCR_WHOLD(0) | - DAVINCI_ABCR_RSETUP(0) | - DAVINCI_ABCR_RSTROBE(1) | - DAVINCI_ABCR_RHOLD(0) | - DAVINCI_ABCR_TA(0) | - DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->ab1cr); /* CS2 */ -#endif - - /* - * Power on required peripherals - * ARM does not have access by default to PSC0 and PSC1 - * assuming here that the DSP bootloader has set the IOPU - * such that PSC access is available to ARM - */ - if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) - return 1; - - /* setup the SUSPSRC for ARM to control emulation suspend */ - writel(readl(&davinci_syscfg_regs->suspsrc) & - ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART0), - &davinci_syscfg_regs->suspsrc); - - /* configure pinmux settings */ - if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) - return 1; - -#ifdef CONFIG_DRIVER_TI_EMAC - if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) - return 1; - - davinci_emac_mii_mode_sel(HAS_RMII); -#endif /* CONFIG_DRIVER_TI_EMAC */ - - /* enable the console UART */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart0_ctrl_regs->pwremu_mgmt); - - /* - * Reconfigure the LCDC priority to the highest to ensure that - * the throughput/latency requirements for the LCDC are met. - */ - writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff, - &davinci_syscfg_regs->mstpri[2]); - - - return 0; -} - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_EA20; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - da8xx_video_init(&lcd_panel, &lcd_cfg, 16); - - return 0; -} - -#ifdef CONFIG_BOARD_LATE_INIT - -int board_late_init(void) -{ - unsigned char buf[2]; - int ret; - - /* PinMux for HALTEN */ - if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0) - return 1; - - /* Set HALTEN to high */ - gpio_direction_output(134, 1); - - /* Set fixed contrast settings for LCD via I2C potentiometer */ - buf[0] = 0x00; - buf[1] = 0xd7; - ret = i2c_write(0x2e, 6, 1, buf, 2); - if (ret) - puts("\nContrast Settings FAILED\n"); - - /* Set LCD_B_PWR high to power up LCD Backlight*/ - gpio_set_value(102, 1); - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -#ifdef CONFIG_DRIVER_TI_EMAC - -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - /* - * This board has a RMII PHY. However, the MDC line on the SOM - * must not be disabled (there is no MII PHY on the - * baseboard) via the GPIO2[6], because this pin - * disables at the same time the SPI flash. - */ - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/board/davinci/schmoogie/Kconfig b/board/davinci/schmoogie/Kconfig deleted file mode 100644 index 3581075..0000000 --- a/board/davinci/schmoogie/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SCHMOOGIE - -config SYS_BOARD - default "schmoogie" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_schmoogie" - -endif diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS deleted file mode 100644 index 808e7fc..0000000 --- a/board/davinci/schmoogie/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SCHMOOGIE BOARD -#M: - -S: Maintained -F: board/davinci/schmoogie/ -F: include/configs/davinci_schmoogie.h -F: configs/davinci_schmoogie_defconfig diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile deleted file mode 100644 index e170d55..0000000 --- a/board/davinci/schmoogie/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := schmoogie.o -obj-y += board_init.o diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S deleted file mode 100644 index ded0590..0000000 --- a/board/davinci/schmoogie/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk deleted file mode 100644 index ed80707..0000000 --- a/board/davinci/schmoogie/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan swami.iyer@ti.com -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c deleted file mode 100644 index 741afc4..0000000 --- a/board/davinci/schmoogie/schmoogie.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - u_int8_t tmp[20], buf[10]; - int i = 0; - - /* Set serial number from UID chip */ - const u_int8_t crc_tbl[256] = { - 0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83, - 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41, - 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e, - 0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc, - 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0, - 0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62, - 0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d, - 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff, - 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5, - 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07, - 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58, - 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a, - 0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6, - 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24, - 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b, - 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9, - 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f, - 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd, - 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92, - 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50, - 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c, - 0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee, - 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1, - 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73, - 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49, - 0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b, - 0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4, - 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16, - 0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a, - 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8, - 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7, - 0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35 - }; - - /* Set serial number from UID chip */ - if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) { - printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } else { - if (buf[0] != 0x70) { - /* Device Family Code */ - printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } - } - /* Now check CRC */ - tmp[0] = 0; - for (i = 0; i < 8; i++) - tmp[0] = crc_tbl[tmp[0] ^ buf[i]]; - - if (tmp[0] != 0) { - printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } else { - /* CRC OK, set "serial" env variable */ - sprintf((char *)&tmp[0], "%02x%02x%02x%02x%02x%02x", - buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]); - setenv("serial#", (char *)&tmp[0]); - } - - return(0); -} diff --git a/board/davinci/sffsdr/Kconfig b/board/davinci/sffsdr/Kconfig deleted file mode 100644 index dc48f31..0000000 --- a/board/davinci/sffsdr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SFFSDR - -config SYS_BOARD - default "sffsdr" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_sffsdr" - -endif diff --git a/board/davinci/sffsdr/MAINTAINERS b/board/davinci/sffsdr/MAINTAINERS deleted file mode 100644 index 5c7e132..0000000 --- a/board/davinci/sffsdr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SFFSDR BOARD -#M: - -S: Maintained -F: board/davinci/sffsdr/ -F: include/configs/davinci_sffsdr.h -F: configs/davinci_sffsdr_defconfig diff --git a/board/davinci/sffsdr/Makefile b/board/davinci/sffsdr/Makefile deleted file mode 100644 index 4ab30a4..0000000 --- a/board/davinci/sffsdr/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sffsdr.o -obj-y += board_init.o diff --git a/board/davinci/sffsdr/board_init.S b/board/davinci/sffsdr/board_init.S deleted file mode 100644 index ded0590..0000000 --- a/board/davinci/sffsdr/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/sffsdr/config.mk b/board/davinci/sffsdr/config.mk deleted file mode 100644 index 4fe9007..0000000 --- a/board/davinci/sffsdr/config.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# Copyright (C) 2008 Lyrtech <www.lyrtech.com> -# Copyright (C) 2008 Philip Balister, OpenSDR philip@opensdr.com -# -# Lyrtech SFF SDR board (ARM926EJS) cpu -# -# SFF SDR board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 87FF'FFFF -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0, -# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc). -# -# we load ourself to 8400'0000 to provide at least 32MB spacing -# between us and the Integrity kernel image -CONFIG_SYS_TEXT_BASE = 0x84000000 diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c deleted file mode 100644 index f6ab91e..0000000 --- a/board/davinci/sffsdr/sffsdr.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2008 Philip Balister, OpenSDR philip@opensdr.com - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ -#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ - -#define INTEGRITY_SYSCFG_OFFSET 0x7E8 -#define INTEGRITY_CHECKWORD_OFFSET 0x7F8 -#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_SFFSDR; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -/* Read ethernet MAC address from Integrity data structure inside EEPROM. - * Returns 1 if found, 0 otherwise. - */ -static int sffsdr_read_mac_address(uint8_t *buf) -{ - u_int32_t value, mac[2], address; - - /* Read Integrity data structure checkword. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - if (value != INTEGRITY_CHECKWORD_VALUE) - return 0; - - /* Read SYSCFG structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + (int) value; /* Address of SYSCFG structure. */ - - /* Read NET CONFIG structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + (int) value; /* Address of NET CONFIG structure. */ - address += 12; /* Address of NET INTERFACE CONFIG structure. */ - - /* Read NET INTERFACE CONFIG 2 structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE - * CONFIG 2 structure. */ - - /* Read MAC address. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8)) - goto err; - - buf[0] = mac[0] >> 24; - buf[1] = mac[0] >> 16; - buf[2] = mac[0] >> 8; - buf[3] = mac[0]; - buf[4] = mac[1] >> 24; - buf[5] = mac[1] >> 16; - - return 1; /* Found */ - -err: - printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR); - return 0; -} - -/* Platform dependent initialisation. */ -int misc_init_r(void) -{ - uint8_t i2cbuf; - uint8_t eeprom_enetaddr[6]; - - /* EMIF-A CS3 configuration for FPGA. */ - REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL; - - /* Configure I2C switch (PCA9543) to enable channel 0. */ - i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0; - if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0, - CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) { - printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR); - return 1; - } - - /* Read Ethernet MAC address from EEPROM if available. */ - if (sffsdr_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - return(0); -} diff --git a/board/davinci/sonata/Kconfig b/board/davinci/sonata/Kconfig deleted file mode 100644 index 4440d95..0000000 --- a/board/davinci/sonata/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SONATA - -config SYS_BOARD - default "sonata" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_sonata" - -endif diff --git a/board/davinci/sonata/MAINTAINERS b/board/davinci/sonata/MAINTAINERS deleted file mode 100644 index 40659e5..0000000 --- a/board/davinci/sonata/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SONATA BOARD -#M: - -S: Maintained -F: board/davinci/sonata/ -F: include/configs/davinci_sonata.h -F: configs/davinci_sonata_defconfig diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile deleted file mode 100644 index 92e1a18..0000000 --- a/board/davinci/sonata/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sonata.o -obj-y += board_init.o diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S deleted file mode 100644 index 0a47ad5..0000000 --- a/board/davinci/sonata/board_init.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer - * Sonata boards, AFAIK, don't use this so it's just return by default. Ask - * Visioneering if they reinvented the wheel once again to make sure :) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: -#ifdef SONATA_BOARD_GPIOWP - /* Set PINMUX0 to enable GPIO4 */ - ldr r0, _PINMUX0 - ldr r1, GPIO4_EN_MASK - ldr r2, [r0] - and r2, r2, r1 - str r2, [r0] - - /* Enable GPIO LPSC module */ - ldr r0, PTSTAT - -gpio_ptstat_loop1: - ldr r2, [r0] - tst r2, $0x00000001 - bne gpio_ptstat_loop1 - - ldr r1, MDCTL_GPIO - ldr r2, [r1] - and r2, r2, $0xfffffff8 - orr r2, r2, $0x00000003 - str r2, [r1] - - orr r2, r2, $0x00000200 - str r2, [r1] - - ldr r1, PTCMD - mov r2, $0x00000001 - str r2, [r1] - -gpio_ptstat_loop2: - ldr r2, [r0] - tst r2, $0x00000001 - bne gpio_ptstat_loop2 - - ldr r0, MDSTAT_GPIO -gpio_mdstat_loop: - ldr r2, [r0] - and r2, r2, $0x0000001f - teq r2, $0x00000003 - bne gpio_mdstat_loop - - /* GPIO4 -> output */ - ldr r0, GPIO_DIR01 - mov r1, $0x10 - ldr r2, [r0] - bic r2, r2, r0 - str r2, [r0] - - /* Set it to 0 (Write Protect) */ - ldr r0, GPIO_CLR_DATA01 - str r1, [r0] -#endif - - mov pc, lr - -#ifdef SONATA_BOARD_GPIOWP -.ltorg - -GPIO4_EN_MASK: - .word 0xf77fffff -MDCTL_GPIO: - .word 0x01c41a68 -MDSTAT_GPIO: - .word 0x01c41868 -GPIO_DIR01: - .word 0x01c67010 -GPIO_CLR_DATA01: - .word 0x01c6701c -#endif diff --git a/board/davinci/sonata/config.mk b/board/davinci/sonata/config.mk deleted file mode 100644 index ed80707..0000000 --- a/board/davinci/sonata/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan swami.iyer@ti.com -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c deleted file mode 100644 index f5c3258..0000000 --- a/board/davinci/sonata/sonata.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <nand.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - uint8_t eeprom_enetaddr[6]; - - /* Read Ethernet MAC address from EEPROM if available. */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - return(0); -} - -#ifdef CONFIG_NAND_DAVINCI - -/* Set WP on deselect, write enable on select */ -static void nand_sonata_select_chip(struct mtd_info *mtd, int chip) -{ -#define GPIO_SET_DATA01 0x01c67018 -#define GPIO_CLR_DATA01 0x01c6701c -#define GPIO_NAND_WP (1 << 4) -#ifdef SONATA_BOARD_GPIOWP - if (chip < 0) { - REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP; - } else { - REG(GPIO_SET_DATA01) |= GPIO_NAND_WP; - } -#endif -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_sonata_select_chip; - return 0; -} - -#endif /* CONFIG_NAND_DAVINCI */ diff --git a/configs/davinci_dm355evm_defconfig b/configs/davinci_dm355evm_defconfig deleted file mode 100644 index 4513ce4..0000000 --- a/configs/davinci_dm355evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM355EVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM355 EVM # " diff --git a/configs/davinci_dm355leopard_defconfig b/configs/davinci_dm355leopard_defconfig deleted file mode 100644 index 7945605..0000000 --- a/configs/davinci_dm355leopard_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM355LEOPARD=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM355 LEOPARD # " diff --git a/configs/davinci_dm365evm_defconfig b/configs/davinci_dm365evm_defconfig deleted file mode 100644 index 3550e75..0000000 --- a/configs/davinci_dm365evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM365EVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM36x EVM # " diff --git a/configs/davinci_dm6467Tevm_defconfig b/configs/davinci_dm6467Tevm_defconfig deleted file mode 100644 index 3749b81..0000000 --- a/configs/davinci_dm6467Tevm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM6467EVM=y -CONFIG_SYS_EXTRA_OPTIONS="DAVINCI_DM6467TEVM,REFCLK_FREQ=33000000" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm6467evm_defconfig b/configs/davinci_dm6467evm_defconfig deleted file mode 100644 index b2021af..0000000 --- a/configs/davinci_dm6467evm_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM6467EVM=y -CONFIG_SYS_EXTRA_OPTIONS="REFCLK_FREQ=27000000" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM6467 EVM > " diff --git a/configs/davinci_dvevm_defconfig b/configs/davinci_dvevm_defconfig deleted file mode 100644 index 7c6f03e..0000000 --- a/configs/davinci_dvevm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DVEVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_schmoogie_defconfig b/configs/davinci_schmoogie_defconfig deleted file mode 100644 index 2fb4d9f..0000000 --- a/configs/davinci_schmoogie_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SCHMOOGIE=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_sffsdr_defconfig b/configs/davinci_sffsdr_defconfig deleted file mode 100644 index 633b4a8..0000000 --- a/configs/davinci_sffsdr_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SFFSDR=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_sonata_defconfig b/configs/davinci_sonata_defconfig deleted file mode 100644 index 697ce06..0000000 --- a/configs/davinci_sonata_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SONATA=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig deleted file mode 100644 index 1d7494f..0000000 --- a/configs/ea20_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_EA20=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="ea20 > " diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h deleted file mode 100644 index 72296a0..0000000 --- a/include/configs/davinci_dm355evm.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM355 EVM board */ -#define DAVINCI_DM355EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04014000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -/* USB: OTG connector */ -/* NYET -- #define CONFIG_USB_DAVINCI */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#else -#undef CONFIG_USB_MUSB_HCD -#undef CONFIG_CMD_USB -#undef CONFIG_USB_STORAGE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration ... socketed with two chipselects. It normally comes - * with a 2GByte SLC part with 2KB pages (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - * - * This presents a single read-only partition for all bootloader stuff. - * UBL (1+ block), U-Boot (256KB+), U-Boot environment (one block), and - * some extra space to help cope with bad blocks in that data. Linux - * shouldn't care about its detailed layout, and will probably want to use - * UBI/UBFS for the rest (except maybe on smallpage chips). It's easy to - * override this default partitioning using MTDPARTS and cmdlinepart. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h deleted file mode 100644 index e3ff943..0000000 --- a/include/configs/davinci_dm355leopard.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define DAVINCI_DM355LEOPARD - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 /* DM355 based board */ - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 16) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 - -/* NAND */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_HW_ECC - -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OVERWRITE -#endif - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h deleted file mode 100644 index bbc801b..0000000 --- a/include/configs/davinci_dm365evm.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM365 EVM board */ -#define DAVINCI_DM365EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM365 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* EEPROM definitions for EEPROM on DM365 EVM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* Network Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000 -#define PINMUX4_USBDRVBUS_BITSET 0x2000 - -/* USB Configuration */ -#define CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_CMD_USB /* include support for usb */ -#define CONFIG_CMD_STORAGE /* include support for usb */ -#define CONFIG_CMD_FAT /* include support for FAT/storage*/ -#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/ -#endif - -#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */ -#define CONFIG_CMD_USB /* include support for usb cmd */ -#define CONFIG_USB_STORAGE /* MSC class support */ -#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ -#define CONFIG_CMD_FAT /* inclue support for FAT/storage */ -#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ - -#ifdef CONFIG_USB_KEYBOARD /* HID class support */ -#define CONFIG_SYS_USB_EVENT_POLL - -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "DM365VM" -#endif /* CONFIG_USB_MUSB_UDC */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration issocketed with two chipselects just like the DM355 EVM. - * It normally comes with a 2GByte SLC part with 2KB pages - * (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h deleted file mode 100644 index 6346422..0000000 --- a/include/configs/davinci_dm6467evm.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM6467 EVM board */ -#define DAVINCI_DM6467EVM -#define CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NAND_SMALLPAGE - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* SoC Configuration */ - -/* Clock rates detection */ -#ifndef __ASSEMBLY__ -extern unsigned int davinci_arm_clk_get(void); -#endif - -/* Arm Clock frequency */ -#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() -/* Timer Input clock freq */ -#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SOC_DM646X - -/* EEPROM definitions for EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ -#define CONFIG_REVISION_TAG - -/* Serial Driver info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 - -/* Network & Ethernet Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* Flash & Environment */ -#define CONFIG_SYS_NO_FLASH -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_MASK_CLE 0x80000 -#define CONFIG_SYS_NAND_MASK_ALE 0x40000 -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_ENV_OFFSET 0 -#else -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */ -#endif - -/* U-Boot general configuration */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm" -#define CONFIG_BOOTARGS \ - "mem=120M console=ttyS0,115200n8 " \ - "root=/dev/hda1 rw noinitrd ip=dhcp" - -/* U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#endif - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h deleted file mode 100644 index 15d8150..0000000 --- a/include/configs/davinci_dvevm.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Define this to make U-Boot skip low level initialization when loaded - * by initial bootloader. Not required by NAND U-Boot version but IS - * required for a NOR version used to burn the real NOR U-Boot into - * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive - * so it is NOT possible to build a U-Boot with both NAND and NOR routines. - * NOR U-Boot is loaded directly from Flash so it must perform all the - * low level initialization itself. NAND version is loaded by an initial - * bootloader (UBL in TI-ese) that performs such an initialization so it's - * skipped in NAND version. The third DaVinci boot mode loads a bootloader - * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) - * performing low level init prior to loading. All that means we can NOT use - * NAND version to put U-Boot into NOR because it doesn't have NOR support and - * we can NOT use NOR version because it performs low level initialization - * effectively destroying itself in DDR memory. That's why a separate NOR - * version with this define is needed. It is loaded via UART, then one uses - * it to somehow download a proper NOR version built WITHOUT this define to - * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze - * NOR support into the initial bootloader so it won't be needed but DaVinci - * static RAM might be too small for this (I have something like 2Kbytes left - * as of now, without NOR support) so this might've not happened... - * -#define CONFIG_NOR_UART_BOOT - */ - -/*=======*/ -/* Board */ -/*=======*/ -#define DV_EVM -#define CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_SYS_USE_NAND -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ - -#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#ifdef CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT \ - "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)" -#else -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#endif -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#elif defined(CONFIG_SYS_USE_NOR) -#ifdef CONFIG_NOR_UART_BOOT -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#else -#undef CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */ -#endif -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_USB_MUSB_HCD -#define CONFIG_USB_DAVINCI -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \$(bootargs) video=dm64xxfb:output=\$(videostd);run setboot; bootm 0x2050000" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#elif defined(CONFIG_SYS_USE_NOR) -#define CONFIG_CMD_JFFS2 -#else -#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!" -#endif -/*==========================*/ -/* USB MSC support (if any) */ -/*==========================*/ -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_CMD_USB -#ifdef CONFIG_USB_MUSB_HCD -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h deleted file mode 100644 index bc5e1ca..0000000 --- a/include/configs/davinci_schmoogie.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*=======*/ -/* Board */ -/*=======*/ -#define SCHMOOGIE -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define MACH_TYPE_SCHMOOGIE 1255 -#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE - -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/*=====================*/ -/* Board related stuff */ -/*=====================*/ -#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ -#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ -#define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */ -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \$(bootargs) video=dm64xxfb:output=\$(videostd);run setboot" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND -#undef CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h deleted file mode 100644 index e719388..0000000 --- a/include/configs/davinci_sffsdr.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2008 Philip Balister, OpenSDR philip@opensdr.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Board */ -#define SFFSDR -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */ -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/* Serial Driver info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/* Network & Ethernet Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/* Flash & Environment */ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/* I2C switch definitions for PCA9543 chip */ -#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70 -#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ -#define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ -/* U-Boot general configuration */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* Default Linux kernel - * load address. */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, - * may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/* Linux Information */ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=56M " \ - "console=ttyS0,115200n8 " \ - "root=/dev/nfs rw noinitrd ip=dhcp " \ - "nfsroot=${serverip}:/nfsroot/sffsdr " \ - "eth0=${ethaddr}" -#define CONFIG_BOOTCOMMAND \ - "nand read 87A00000 100000 300000;" \ - "bootelf 87A00000" -/* U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_NAND -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */ - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h deleted file mode 100644 index b85c988..0000000 --- a/include/configs/davinci_sonata.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Define this to make U-Boot skip low level initialization when loaded - * by initial bootloader. Not required by NAND U-Boot version but IS - * required for a NOR version used to burn the real NOR U-Boot into - * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive - * so it is NOT possible to build a U-Boot with both NAND and NOR routines. - * NOR U-Boot is loaded directly from Flash so it must perform all the - * low level initialization itself. NAND version is loaded by an initial - * bootloader (UBL in TI-ese) that performs such an initialization so it's - * skipped in NAND version. The third DaVinci boot mode loads a bootloader - * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) - * performing low level init prior to loading. All that means we can NOT use - * NAND version to put U-Boot into NOR because it doesn't have NOR support and - * we can NOT use NOR version because it performs low level initialization - * effectively destroying itself in DDR memory. That's why a separate NOR - * version with this define is needed. It is loaded via UART, then one uses - * it to somehow download a proper NOR version built WITHOUT this define to - * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze - * NOR support into the initial bootloader so it won't be needed but DaVinci - * static RAM might be too small for this (I have something like 2Kbytes left - * as of now, without NOR support) so this might've not happened... - * -#define CONFIG_NOR_UART_BOOT - */ - -/*=======*/ -/* Board */ -/*=======*/ -#define SONATA_BOARD -#define CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_SYS_USE_NOR -#define MACH_TYPE_SONATA 1254 -#define CONFIG_MACH_TYPE MACH_TYPE_SONATA -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_OVERWRITE /* instead if obsoleted forceenv() */ -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#elif defined(CONFIG_SYS_USE_NOR) -#ifdef CONFIG_NOR_UART_BOOT -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#else -#undef CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*2) -#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */ -#endif -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \$(bootargs) video=dm64xxfb:output=\$(videostd);run setboot; bootm 0x2060000" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#elif defined(CONFIG_SYS_USE_NOR) -#define CONFIG_CMD_JFFS2 -#else -#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!" -#endif - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h deleted file mode 100644 index 9a70aae..0000000 --- a/include/configs/ea20.h +++ /dev/null @@ -1,308 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_USE_SPIFLASH -#define CONFIG_SYS_USE_NAND -#define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_VIDEO -#define CONFIG_PREBOOT - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0xc1080000 -#define CONFIG_DA8XX_GPIO - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -#define CONFIG_SPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_EMAC_MDIO_PHY_NUM 0 -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -#ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET 0x80000 -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#define CONFIG_SYS_NO_FLASH -#endif - - -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define CONFIG_CFB_CONSOLE -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_LOGO -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#endif - -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_I2C -#define CONFIG_CMD_GPIO - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -/* NAND Setup */ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_LZO -#define CONFIG_RBTREE -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS - -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_NO_SUBPAGE -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif - -/* SPI Flash */ -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#endif - -#if !defined(CONFIG_SYS_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -/* additions for new relocation code, must added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define CONFIG_HOSTNAME ea20 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "as=3\0" \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "rfsbargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rfsbpath}\0" \ - "testrfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${testrfspath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ - "0x${ramdisk_addr_r},4M\0" \ - "mtdids=nand0=davinci_nand.0\0" \ - "serverip=192.168.5.249\0" \ - "ipaddr=192.168.5.248\0" \ - "rootpath=/opt/eldk/arm\0" \ - "splashpos=230,180\0" \ - "testrfspath=/opt/eldk/test_arm\0" \ - "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ - "ubi.mtd=${as} root=ubi0:rootfs\0" \ - "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ - "ubi.mtd=${as} root=ubi0:rootfs\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${consoledev},${baudrate}n8\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ - "consoledev=ttyS0\0" \ - "loadaddr=c0000014\0" \ - "memory=32M\0" \ - "kernel_addr_r=c0700000\0" \ - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr_r}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc addmem;" \ - "bootm ${kernel_addr_r}\0" \ - "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ - "run rfsbargs addip addtty addmtd addmisc addmem; " \ - "bootm ${kernel_addr_r}\0" \ - "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run testrfsargs addip addtty addmtd addmisc addmem; " \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "ubifsload ${kernel_addr_r} /boot/uImage;" \ - "ubifsumount; run nandargs addip addtty " \ - "addmtd addmisc addmem;clrlogo;" \ - "bootm ${kernel_addr_r}\0" \ - "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "ubifsload ${kernel_addr_r} /boot/uImage;" \ - "ubifsumount; run nandrwargs addip addtty " \ - "addmtd addmisc addmem;clrlogo;" \ - "bootm ${kernel_addr_r}\0" \ - "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ - " addip addtty addmtd addmisc addmem;" \ - "clrlogo;bootm ${kernel_addr_r}\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ - "load_magic=if sf probe 0;then sf " \ - "read c0000000 0x10000 0x60000;fi\0" \ - "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ - "if ubifsload c0000014 /boot/u-boot.bin;" \ - "then mw c0000008 ${filesize};else echo Error reading" \ - " u-boot from nand!;fi\0" \ - "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ - "0x60000;tftp c0000014 ${u-boot};" \ - "mw c0000008 ${filesize};fi\0" \ - "upd=if sf probe 0;then sf erase 10000 60000;" \ - "sf write c0000000 10000 60000;fi\0" \ - "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ - "sf erase 0 10000;" \ - "sf write 0xc0700000 0 ${filesize};fi\0" \ - "ubootupd_net=if run load_net;then echo Updating u-boot;" \ - "if run upd; then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ - "bootcmd=run net_testrfs\0" - -#endif /* __CONFIG_H */

This board has not been converted to generic board by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/mach-davinci/Kconfig | 4 - board/enbw/enbw_cmc/Kconfig | 12 - board/enbw/enbw_cmc/MAINTAINERS | 6 - board/enbw/enbw_cmc/Makefile | 10 - board/enbw/enbw_cmc/enbw_cmc.c | 893 ---------------------------------------- configs/enbw_cmc_defconfig | 5 - doc/README.switch_config | 25 -- include/configs/enbw_cmc.h | 440 -------------------- 8 files changed, 1395 deletions(-) delete mode 100644 board/enbw/enbw_cmc/Kconfig delete mode 100644 board/enbw/enbw_cmc/MAINTAINERS delete mode 100644 board/enbw/enbw_cmc/Makefile delete mode 100644 board/enbw/enbw_cmc/enbw_cmc.c delete mode 100644 configs/enbw_cmc_defconfig delete mode 100644 doc/README.switch_config delete mode 100644 include/configs/enbw_cmc.h

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 790d177..cac0867 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,9 +4,6 @@ choice prompt "DaVinci board select" optional

-config TARGET_ENBW_CMC - bool "EnBW CMC board" - config TARGET_IPAM390 bool "IPAM390 board" select SUPPORT_SPL @@ -30,7 +27,6 @@ endchoice config SYS_SOC default "davinci"

-source "board/enbw/enbw_cmc/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/omicron/calimain/Kconfig" diff --git a/board/enbw/enbw_cmc/Kconfig b/board/enbw/enbw_cmc/Kconfig deleted file mode 100644 index 796736d..0000000 --- a/board/enbw/enbw_cmc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ENBW_CMC - -config SYS_BOARD - default "enbw_cmc" - -config SYS_VENDOR - default "enbw" - -config SYS_CONFIG_NAME - default "enbw_cmc" - -endif diff --git a/board/enbw/enbw_cmc/MAINTAINERS b/board/enbw/enbw_cmc/MAINTAINERS deleted file mode 100644 index f7c9920..0000000 --- a/board/enbw/enbw_cmc/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ENBW_CMC BOARD -M: Heiko Schocher hs@denx.de -S: Maintained -F: board/enbw/enbw_cmc/ -F: include/configs/enbw_cmc.h -F: configs/enbw_cmc_defconfig diff --git a/board/enbw/enbw_cmc/Makefile b/board/enbw/enbw_cmc/Makefile deleted file mode 100644 index 054d6e7..0000000 --- a/board/enbw/enbw_cmc/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := enbw_cmc.o diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c deleted file mode 100644 index 53b8362..0000000 --- a/board/enbw/enbw_cmc/enbw_cmc.c +++ /dev/null @@ -1,893 +0,0 @@ -/* - * (C) Copyright 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on da830evm.c. Original Copyrights follow: - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. nick.thompson@gefanuc.com - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <environment.h> -#include <hwconfig.h> -#include <i2c.h> -#include <malloc.h> -#include <miiphy.h> -#include <mmc.h> -#include <net.h> -#include <netdev.h> -#include <spi.h> -#include <linux/ctype.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch/da850_lowlevel.h> -#include <asm/arch/davinci_misc.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/emac_defs.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pinmux_defs.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sdmmc_defs.h> -#include <asm/arch/timer_defs.h> -#include <asm/davinci_rtc.h> - -DECLARE_GLOBAL_DATA_PTR; - -const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, - { DAVINCI_LPSC_SPI1 }, - { DAVINCI_LPSC_ARM_RAM_ROM }, - { DAVINCI_LPSC_UART0 }, - { DAVINCI_LPSC_EMAC }, - { DAVINCI_LPSC_UART0 }, - { DAVINCI_LPSC_GPIO }, - { DAVINCI_LPSC_DDR_EMIF }, - { DAVINCI_LPSC_UART1 }, - { DAVINCI_LPSC_UART2 }, - { DAVINCI_LPSC_MMC_SD1 }, - { DAVINCI_LPSC_USB20 }, - { DAVINCI_LPSC_USB11 }, -}; - -const int lpsc_size = ARRAY_SIZE(lpsc); - -static const struct pinmux_config enbw_pins[] = { - { pinmux(0), 8, 0 }, - { pinmux(0), 8, 1 }, - { pinmux(0), 8, 2 }, - { pinmux(0), 8, 3 }, - { pinmux(0), 8, 4 }, - { pinmux(0), 8, 5 }, - { pinmux(1), 4, 0 }, - { pinmux(1), 8, 1 }, - { pinmux(1), 8, 2 }, - { pinmux(1), 8, 3 }, - { pinmux(1), 8, 4 }, - { pinmux(1), 8, 5 }, - { pinmux(1), 8, 6 }, - { pinmux(1), 4, 7 }, - { pinmux(2), 8, 0 }, - { pinmux(5), 1, 0 }, - { pinmux(5), 1, 3 }, - { pinmux(5), 1, 7 }, - { pinmux(5), 1, 5 }, - { pinmux(5), 1, 4 }, - { pinmux(5), 1, 3 }, - { pinmux(5), 1, 2 }, - { pinmux(5), 1, 1 }, - { pinmux(5), 1, 0 }, - { pinmux(6), 8, 0 }, - { pinmux(6), 8, 1 }, - { pinmux(6), 8, 2 }, - { pinmux(6), 8, 3 }, - { pinmux(6), 8, 4 }, - { pinmux(6), 8, 5 }, - { pinmux(6), 1, 7 }, - { pinmux(7), 8, 2 }, - { pinmux(7), 1, 3 }, - { pinmux(7), 8, 6 }, - { pinmux(7), 1, 7 }, - { pinmux(13), 8, 2 }, - { pinmux(13), 8, 3 }, - { pinmux(13), 8, 4 }, - { pinmux(13), 8, 5 }, - { pinmux(13), 8, 6 }, - { pinmux(13), 8, 7 }, - { pinmux(14), 8, 0 }, - { pinmux(14), 8, 1 }, - { pinmux(16), 8, 1 }, - { pinmux(16), 8, 2 }, - { pinmux(16), 8, 3 }, - { pinmux(16), 8, 4 }, - { pinmux(16), 8, 5 }, - { pinmux(16), 8, 6 }, - { pinmux(16), 8, 7 }, - { pinmux(17), 1, 0 }, - { pinmux(17), 1, 1 }, - { pinmux(17), 1, 2 }, - { pinmux(17), 8, 3 }, - { pinmux(17), 8, 4 }, - { pinmux(17), 8, 5 }, - { pinmux(17), 8, 6 }, - { pinmux(17), 8, 7 }, - { pinmux(18), 8, 0 }, - { pinmux(18), 8, 1 }, - { pinmux(18), 2, 2 }, - { pinmux(18), 2, 3 }, - { pinmux(18), 2, 4 }, - { pinmux(18), 8, 6 }, - { pinmux(18), 8, 7 }, - { pinmux(19), 8, 0 }, - { pinmux(19), 2, 1 }, - { pinmux(19), 2, 2 }, - { pinmux(19), 2, 3 }, - { pinmux(19), 2, 4 }, - { pinmux(19), 8, 5 }, - { pinmux(19), 8, 6 }, -}; - -const struct pinmux_resource pinmuxes[] = { - PINMUX_ITEM(emac_pins_mii), - PINMUX_ITEM(emac_pins_mdio), - PINMUX_ITEM(i2c0_pins), - PINMUX_ITEM(emifa_pins_cs2), - PINMUX_ITEM(emifa_pins_cs3), - PINMUX_ITEM(emifa_pins_cs4), - PINMUX_ITEM(emifa_pins_nand), - PINMUX_ITEM(emifa_pins_nor), - PINMUX_ITEM(spi1_pins_base), - PINMUX_ITEM(spi1_pins_scs0), - PINMUX_ITEM(uart1_pins_txrx), - PINMUX_ITEM(uart2_pins_txrx), - PINMUX_ITEM(uart2_pins_rtscts), - PINMUX_ITEM(enbw_pins), -}; - -const int pinmuxes_size = ARRAY_SIZE(pinmuxes); - -struct gpio_config { - char name[GPIO_NAME_SIZE]; - unsigned char bank; - unsigned char gpio; - unsigned char out; - unsigned char value; -}; - -static const struct gpio_config enbw_gpio_config_hut[] = { - { "RS485 enable", 8, 11, 1, 0 }, - { "RS485 iso", 8, 10, 1, 1 }, - { "W2HUT RS485 Rx ena", 8, 9, 1, 0 }, - { "W2HUT RS485 iso", 8, 8, 1, 1 }, -}; - -static const struct gpio_config enbw_gpio_config_w[] = { - { "RS485 enable", 8, 11, 1, 0 }, - { "RS485 iso", 8, 10, 1, 0 }, - { "W2HUT RS485 Rx ena", 8, 9, 1, 0 }, - { "W2HUT RS485 iso", 8, 8, 1, 0 }, -}; - -static const struct gpio_config enbw_gpio_config[] = { - { "LAN reset", 7, 15, 1, 1 }, - { "ena 11V PLC", 7, 14, 1, 0 }, - { "ena 1.5V PLC", 7, 13, 1, 0 }, - { "disable VBUS", 7, 12, 1, 1 }, - { "PLC reset", 6, 13, 1, 0 }, - { "LCM RS", 6, 12, 1, 0 }, - { "LCM R/W", 6, 11, 1, 0 }, - { "PLC pairing", 6, 10, 1, 1 }, - { "PLC MDIO CLK", 6, 9, 1, 0 }, - { "HK218", 6, 8, 1, 0 }, - { "HK218 Rx", 6, 1, 1, 1 }, - { "TPM reset", 6, 0, 1, 0 }, - { "Board-Type", 3, 9, 0, 0 }, - { "HW-ID0", 2, 7, 0, 0 }, - { "HW-ID1", 2, 6, 0, 0 }, - { "HW-ID2", 2, 3, 0, 0 }, - { "PV-IF RxD ena", 0, 15, 1, 1 }, - { "LED1", 1, 15, 1, 1 }, - { "LED2", 0, 1, 1, 1 }, - { "LED3", 0, 2, 1, 1 }, - { "LED4", 0, 3, 1, 1 }, - { "LED5", 0, 4, 1, 1 }, - { "LED6", 0, 5, 1, 0 }, - { "LED7", 0, 6, 1, 0 }, - { "LED8", 0, 14, 1, 0 }, - { "USER1", 0, 12, 0, 0 }, - { "USER2", 0, 13, 0, 0 }, -}; - -#define PHY_POWER 0x0800 - -static void enbw_cmc_switch(int port, int on) -{ - const char *devname; - unsigned char phyaddr = 3; - unsigned char reg = 0; - unsigned short data; - - if (port == 1) - phyaddr = 2; - - devname = miiphy_get_current_dev(); - if (!devname) { - printf("Error: no mii device\n"); - return; - } - if (miiphy_read(devname, phyaddr, reg, &data) != 0) { - printf("Error reading from the PHY addr=%02x reg=%02x\n", - phyaddr, reg); - return; - } - - if (on) - data &= ~PHY_POWER; - else - data |= PHY_POWER; - - if (miiphy_write(devname, phyaddr, reg, data) != 0) { - printf("Error writing to the PHY addr=%02x reg=%02x\n", - phyaddr, reg); - return; - } -} - -static int enbw_cmc_init_gpio(const struct gpio_config *conf, int sz) -{ - int i, ret; - - for (i = 0; i < sz; i++) { - int gpio = conf[i].bank * 16 + - conf[i].gpio; - - ret = gpio_request(gpio, conf[i].name); - if (ret) { - printf("%s: Could not get %s gpio\n", __func__, - conf[i].name); - return ret; - } - - if (conf[i].out) - gpio_direction_output(gpio, - conf[i].value); - else - gpio_direction_input(gpio); - } - - return 0; -} - -int board_init(void) -{ - int board_type, hw_id; - -#ifndef CONFIG_USE_IRQ - irq_init(); -#endif - /* address of boot parameters, not used as booting with DTT */ - gd->bd->bi_boot_params = 0; - - enbw_cmc_init_gpio(enbw_gpio_config, ARRAY_SIZE(enbw_gpio_config)); - - /* detect HW version */ - board_type = gpio_get_value(CONFIG_ENBW_CMC_BOARD_TYPE); - hw_id = gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT0) + - (gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT1) << 1) + - (gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT2) << 2); - printf("BOARD: CMC-%s hw id: %d\n", (board_type ? "w2" : "hut"), - hw_id); - if (board_type) - enbw_cmc_init_gpio(enbw_gpio_config_w, - ARRAY_SIZE(enbw_gpio_config_w)); - else - enbw_cmc_init_gpio(enbw_gpio_config_hut, - ARRAY_SIZE(enbw_gpio_config_hut)); - - /* setup the SUSPSRC for ARM to control emulation suspend */ - clrbits_le32(&davinci_syscfg_regs->suspsrc, - (DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART2)); - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC - -#define KSZ_CMD_READ 0x03 -#define KSZ_CMD_WRITE 0x02 -#define KSZ_ID 0x95 - -static int enbw_cmc_switch_read(struct spi_slave *spi, u8 reg, u8 *val) -{ - unsigned long flags = SPI_XFER_BEGIN; - int ret; - int cmd_len; - u8 cmd[2]; - - cmd[0] = KSZ_CMD_READ; - cmd[1] = reg; - cmd_len = 2; - - ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); - if (ret) { - debug("Failed to send command (%zu bytes): %d\n", - cmd_len, ret); - return -EINVAL; - } - flags |= SPI_XFER_END; - *val = 0; - cmd_len = 1; - ret = spi_xfer(spi, cmd_len * 8, NULL, val, flags); - if (ret) { - debug("Failed to read (%zu bytes): %d\n", - cmd_len, ret); - return -EINVAL; - } - - return 0; -} - -static int enbw_cmc_switch_read_ident(struct spi_slave *spi) -{ - int ret; - u8 val; - - ret = enbw_cmc_switch_read(spi, 0, &val); - if (ret) { - debug("Failed to read\n"); - return -EINVAL; - } - - if (val != KSZ_ID) - return -EINVAL; - - return 0; -} - -static int enbw_cmc_switch_write(struct spi_slave *spi, unsigned long reg, - unsigned long val) -{ - unsigned long flags = SPI_XFER_BEGIN; - int ret; - int cmd_len; - u8 cmd[3]; - - cmd[0] = KSZ_CMD_WRITE; - cmd[1] = reg; - cmd[2] = val; - cmd_len = 3; - flags |= SPI_XFER_END; - - ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); - if (ret) { - debug("Failed to send command (%zu bytes): %d\n", - cmd_len, ret); - return -EINVAL; - } - - udelay(1000); - ret = enbw_cmc_switch_read(spi, reg, &cmd[0]); - if (ret) { - debug("Failed to read\n"); - return -EINVAL; - } - if (val != cmd[0]) - debug("warning: reg: %lx va: %x soll: %lx\n", - reg, cmd[0], val); - - return 0; -} - -static int enbw_cmc_eof(unsigned char *ptr) -{ - if (*ptr == 0xff) - return 1; - - return 0; -} - -static char *enbw_cmc_getnewline(char *ptr) -{ - while (*ptr != 0x0a) { - ptr++; - if (enbw_cmc_eof((unsigned char *)ptr)) - return NULL; - } - - ptr++; - return ptr; -} - -static char *enbw_cmc_getvalue(char *ptr, int *value) -{ - int end = 0; - - *value = -EINVAL; - - if (!isxdigit(*ptr)) - end = 1; - - while (end) { - if ((*ptr == '#') || (*ptr == ';')) { - ptr = enbw_cmc_getnewline(ptr); - return ptr; - } - if (ptr != NULL) { - if (isxdigit(*ptr)) { - end = 0; - } else if (*ptr == 0x0a) { - ptr++; - return ptr; - } else { - ptr++; - if (enbw_cmc_eof((unsigned char *)ptr)) - return NULL; - } - } else { - return NULL; - } - } - *value = (int)simple_strtoul((const char *)ptr, &ptr, 16); - ptr++; - return ptr; -} - -static struct spi_slave *enbw_cmc_init_spi(void) -{ - struct spi_slave *spi; - int ret; - - spi = spi_setup_slave(0, 0, 1000000, 0); - if (!spi) { - printf("Failed to set up slave\n"); - return NULL; - } - - ret = spi_claim_bus(spi); - if (ret) { - debug("Failed to claim SPI bus: %d\n", ret); - goto err_claim_bus; - } - - ret = enbw_cmc_switch_read_ident(spi); - if (ret) - goto err_read; - - return spi; -err_read: - spi_release_bus(spi); -err_claim_bus: - spi_free_slave(spi); - return NULL; -} - -static int enbw_cmc_config_switch(unsigned long addr) -{ - struct spi_slave *spi; - char *ptr = (char *)addr; - int value, reg; - int ret = 0; - - debug("configure switch with file on addr: 0x%lx\n", addr); - - spi = enbw_cmc_init_spi(); - if (!spi) - return -EINVAL; - - while (ptr != NULL) { - ptr = enbw_cmc_getvalue(ptr, &reg); - if (ptr != NULL) { - ptr = enbw_cmc_getvalue(ptr, &value); - if ((ptr != NULL) && (value >= 0)) - if (enbw_cmc_switch_write(spi, reg, value)) { - /* error writing to switch */ - ptr = NULL; - ret = -EINVAL; - } - } - } - - spi_release_bus(spi); - spi_free_slave(spi); - return ret; -} - -static int do_switch(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - unsigned long addr; - - if (argc < 2) - return cmd_usage(cmdtp); - - addr = simple_strtoul(argv[1], NULL, 16); - enbw_cmc_config_switch(addr); - - return 0; -} - -U_BOOT_CMD(switch, 3, 1, do_switch, - "switch addr", - "[addr]" -); - -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - struct spi_slave *spi; - const char *s; - size_t len = 0; - int config = 1; - - davinci_emac_mii_mode_sel(0); - - /* send a config file to the switch */ - s = hwconfig_subarg("switch", "config", &len); - if (len) { - unsigned long addr = simple_strtoul(s, NULL, 16); - - config = enbw_cmc_config_switch(addr); - } - - if (config) { - /* - * no valid config file -> do we have some args in - * hwconfig ? - */ - if ((hwconfig_subarg("switch", "lan", &len)) || - (hwconfig_subarg("switch", "lmn", &len))) { - /* If so start switch */ - spi = enbw_cmc_init_spi(); - if (spi) { - if (enbw_cmc_switch_write(spi, 1, 0)) - config = 0; - udelay(10000); - if (enbw_cmc_switch_write(spi, 1, 1)) - config = 0; - spi_release_bus(spi); - spi_free_slave(spi); - } - } else { - config = 0; - } - } - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - if (config) { - if (hwconfig_subarg_cmp("switch", "lan", "on")) - /* Switch port lan on */ - enbw_cmc_switch(1, 1); - else - enbw_cmc_switch(1, 0); - - if (hwconfig_subarg_cmp("switch", "lmn", "on")) - /* Switch port pwl on */ - enbw_cmc_switch(2, 1); - else - enbw_cmc_switch(2, 0); - } - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -#ifdef CONFIG_PREBOOT -static uchar kbd_magic_prefix[] = "key_magic_"; -static uchar kbd_command_prefix[] = "key_cmd_"; - -struct kbd_data_t { - char s1; -}; - -struct kbd_data_t *get_keys(struct kbd_data_t *kbd_data) -{ - /* read SW1 + SW2 */ - kbd_data->s1 = gpio_get_value(12) + - (gpio_get_value(13) << 1); - return kbd_data; -} - -static int compare_magic(const struct kbd_data_t *kbd_data, char *str) -{ - char s1 = str[0]; - - if (s1 >= '0' && s1 <= '9') - s1 -= '0'; - else if (s1 >= 'a' && s1 <= 'f') - s1 = s1 - 'a' + 10; - else if (s1 >= 'A' && s1 <= 'F') - s1 = s1 - 'A' + 10; - else - return -1; - - if (s1 != kbd_data->s1) - return -1; - - return 0; -} - -static char *key_match(const struct kbd_data_t *kbd_data) -{ - char magic[sizeof(kbd_magic_prefix) + 1]; - char *suffix; - char *kbd_magic_keys; - - /* - * The following string defines the characters that can be appended - * to "key_magic" to form the names of environment variables that - * hold "magic" key codes, i. e. such key codes that can cause - * pre-boot actions. If the string is empty (""), then only - * "key_magic" is checked (old behaviour); the string "125" causes - * checks for "key_magic1", "key_magic2" and "key_magic5", etc. - */ - kbd_magic_keys = getenv("magic_keys"); - if (kbd_magic_keys == NULL) - kbd_magic_keys = ""; - - /* - * loop over all magic keys; - * use '\0' suffix in case of empty string - */ - for (suffix = kbd_magic_keys; *suffix || - suffix == kbd_magic_keys; ++suffix) { - sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); - - if (compare_magic(kbd_data, getenv(magic)) == 0) { - char cmd_name[sizeof(kbd_command_prefix) + 1]; - char *cmd; - - sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); - cmd = getenv(cmd_name); - - return cmd; - } - } - - return NULL; -} -#endif /* CONFIG_PREBOOT */ - -int misc_init_r(void) -{ - char *s, buf[32]; -#ifdef CONFIG_PREBOOT - struct kbd_data_t kbd_data; - /* Decode keys */ - char *str = strdup(key_match(get_keys(&kbd_data))); - /* Set or delete definition */ - setenv("preboot", str); - free(str); -#endif /* CONFIG_PREBOOT */ - - /* count all restarts, and save this in an environment var */ - s = getenv("restartcount"); - - if (s) - sprintf(buf, "%ld", simple_strtoul(s, NULL, 10) + 1); - else - strcpy(buf, "1"); - - setenv("restartcount", buf); - saveenv(); - -#ifdef CONFIG_HW_WATCHDOG - davinci_hw_watchdog_enable(); -#endif - - return 0; -} - -struct cmc_led { - char name[20]; - unsigned char bank; - unsigned char gpio; -}; - -struct cmc_led led_table[] = { - {"led1", 1, 15}, - {"led2", 0, 1}, - {"led3", 0, 2}, - {"led4", 0, 3}, - {"led5", 0, 4}, - {"led6", 0, 5}, - {"led7", 0, 6}, - {"led8", 0, 14}, -}; - -static int cmc_get_led_state(struct cmc_led *led) -{ - int value; - int gpio = led->bank * 16 + led->gpio; - - value = gpio_get_value(gpio); - - return value; -} - -static int cmc_set_led_state(struct cmc_led *led, int state) -{ - int gpio = led->bank * 16 + led->gpio; - - gpio_set_value(gpio, state); - return 0; -} - -static int do_led(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - struct cmc_led *led; - int found = 0; - int i = 0; - int only_print = 0; - int len = ARRAY_SIZE(led_table); - - if (argc < 2) - return cmd_usage(cmdtp); - - if (argc < 3) - only_print = 1; - - led = led_table; - while ((!found) && (i < len)) { - if (strcmp(argv[1], led->name) == 0) { - found = 1; - } else { - led++; - i++; - } - } - if (!found) - return cmd_usage(cmdtp); - - if (only_print) { - if (cmc_get_led_state(led)) - printf("on\n"); - else - printf("off\n"); - - return 0; - } - if (strcmp(argv[2], "on") == 0) - cmc_set_led_state(led, 1); - else - cmc_set_led_state(led, 0); - - return 0; -} - -U_BOOT_CMD(led, 3, 1, do_led, - "switch on/off board led", - "[name] [on/off]" -); - -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - davinci_hw_watchdog_reset(); -} -#endif - -#if defined(CONFIG_POST) -void arch_memory_failure_handle(void) -{ - struct davinci_gpio *gpio = davinci_gpio_bank01; - int state = 1; - - /* - * if memor< failure blink with the LED 1,2 and 3 - * as we running from flash, we cannot use the gpio - * api here, so access the gpio pin direct through - * the gpio register. - */ - while (1) { - if (state) { - clrbits_le32(&gpio->out_data, 0x80000006); - state = 0; - } else { - setbits_le32(&gpio->out_data, 0x80000006); - state = 1; - } - udelay(500); - } -} -#endif - -ulong post_word_load(void) -{ - struct davinci_rtc *reg = - (struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR; - - return in_be32(&reg->scratch2); -} - -void post_word_store(ulong value) -{ - struct davinci_rtc *reg = - (struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR; - - /* - * write RTC kick register to enable write - * for RTC Scratch registers. Cratch0 and 1 are - * used for bootcount values. - */ - writel(RTC_KICK0R_WE, &reg->kick0r); - writel(RTC_KICK1R_WE, &reg->kick1r); - out_be32(&reg->scratch2, value); -} - -void board_gpio_init(void) -{ - struct davinci_gpio *gpio = davinci_gpio_bank01; - - /* - * set LED (gpio Interface not usable here) - * set LED pins to output and state 0 - */ - clrbits_le32(&gpio->dir, 0x8000407e); - clrbits_le32(&gpio->out_data, 0x8000407e); - /* set LED 1 - 5 to state on */ - setbits_le32(&gpio->out_data, 0x8000001e); - - /* - * set some gpio pins to low, this is needed early, - * so we have no gpio Interface here - * gpios: - * 8[8] Mode PV select low - * 8[9] Debug Rx Enable low - * 8[10] Mode Select PV low - * 8[11] Counter Interface RS485 Rx-Enable low - */ - gpio = davinci_gpio_bank8; - clrbits_le32(&gpio->dir, 0x00000f00); - clrbits_le32(&gpio->out_data, 0x0f00); -} - -int board_late_init(void) -{ - cmc_set_led_state(&led_table[4], 0); - - return 0; -} - -void show_boot_progress(int val) -{ - switch (val) { - case 1: - cmc_set_led_state(&led_table[4], 1); - break; - case 4: - cmc_set_led_state(&led_table[4], 0); - break; - case 15: - cmc_set_led_state(&led_table[4], 1); - break; - } -} - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 228000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -int board_mmc_init(bd_t *bis) -{ - mmc_sd1.input_clk = clk_get(DAVINCI_MMC_CLKID); - /* Add slot-0 to mmc subsystem */ - return davinci_mmc_init(bis, &mmc_sd1); -} -#endif diff --git a/configs/enbw_cmc_defconfig b/configs/enbw_cmc_defconfig deleted file mode 100644 index 90249f3..0000000 --- a/configs/enbw_cmc_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_ENBW_CMC=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/doc/README.switch_config b/doc/README.switch_config deleted file mode 100644 index f890373..0000000 --- a/doc/README.switch_config +++ /dev/null @@ -1,25 +0,0 @@ -On the enbw_cmc board is a KSZ8864RMN switch which needs -configured through spi before working. This is done on -startup from u-boot through a config file stored at an -address specified in the "hwconfig" environment variable, -subcommand "config". - -For example on the enbw_cmc board: - -hwconfig=switch:lan=on,pwl=off,config=0x60160000 - -The file has the following structure: - -- a comment starts with a '#' or a ';' and ends with a newline -- The switch needs for its config a reg/value pair, so we - have two columns in the file: - reg : contains the register address - value: contains a 8 bit register value - This 2 columns are seperated through space or tab. - -example (minimal configuration on the enbw_cmc board): - -;reg value comment -;----------------------------------------- -0x01 0x00 -0x01 0x01 ; Start Switch with this configuration diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h deleted file mode 100644 index 141489d..0000000 --- a/include/configs/enbw_cmc.h +++ /dev/null @@ -1,440 +0,0 @@ -/* - * (C) Copyright 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 7 -#define CONFIG_USE_NAND - -/* - * SoC Configuration - */ -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_DA850_LOWLEVEL -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DA850_PLL_INIT -#define CONFIG_SYS_DA850_DDR_INIT -#define CONFIG_DA8XX_GPIO -#define CONFIG_HOSTNAME enbw_cmc - -#define MACH_TYPE_ENBW_CMC 3585 -#define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 -#define CONFIG_CMD_I2C - -#define CONFIG_CMD_DTT -#define CONFIG_DTT_LM75 -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -/* - * SPI Configuration - */ -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) -#define CONFIG_CMD_SPI - -/* - * Flash & Environment - */ -#ifdef CONFIG_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=davinci_nand.1" -#define MTDPARTS_DEFAULT \ - "mtdparts=" \ - "physmap-flash.0:" \ - "512k(U-Boot)," \ - "64k(env1)," \ - "64k(env2)," \ - "-(rest);" \ - "davinci_nand.1:" \ - "128k(dtb)," \ - "3m(kernel)," \ - "4m(rootfs)," \ - "-(userfs)" - - -#define CONFIG_CMD_MTDPARTS - -#endif - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_MONITOR_LEN 0x80000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_DEFAULT_SETTINGS_ADDR (CONFIG_ENV_ADDR_REDUND + \ - CONFIG_ENV_SECT_SIZE) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=c0000000\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};"\ - "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ - "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \ - " ${filesize};" \ - "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0"\ - "netdev=eth0\0" \ - "rootpath=/opt/eldk-arm/arm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "kernel_addr_r=c0700000\0" \ - "fdt_addr_r=c0600000\0" \ - "ramdisk_addr_r=c0b00000\0" \ - "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \ - __stringify(CONFIG_HOSTNAME) ".dtb\0" \ - "kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \ - "nand_ld_ramdsk=nand read ${ramdisk_addr_r} 320000 400000\0" \ - "nand_ld_kernel=nand read ${kernel_addr_r} 20000 300000\0" \ - "nand_ld_fdt=nand read ${fdt_addr_r} 0 2000\0" \ - "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \ - "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ - "load_nand=run nand_ld_ramdsk nand_ld_kernel nand_ld_fdt\0" \ - "addcon=setenv bootargs ${bootargs} console=ttyS2," \ - "${baudrate}n8\0" \ - "net_nfs=run load_fdt load_kernel; " \ - "run nfsargs addip addcon addmtd addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "nand_selfnand=run load_nand ramargs addip addcon addmisc;bootm "\ - "${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ - "bootcmd=run net_nfs\0" \ - "machid=e01\0" \ - "key_cmd_0=echo key: 0\0" \ - "key_cmd_1=echo key: 1\0" \ - "key_cmd_2=echo key: 2\0" \ - "key_cmd_3=echo key: 3\0" \ - "key_magic_0=0\0" \ - "key_magic_1=1\0" \ - "key_magic_2=2\0" \ - "key_magic_3=3\0" \ - "magic_keys=0123\0" \ - "hwconfig=switch:lan=on,pwl=off,config=0x60100000\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "logversion=2\0" \ - "\0" - -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_BOOTDELAY 3 -#define CONFIG_HWCONFIG -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_BOARD_LATE_INIT - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_CACHE - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#ifdef CONFIG_USE_NAND -#define CONFIG_CMD_NAND - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_LZO -#define CONFIG_RBTREE -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#endif - -#if !defined(CONFIG_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -#define CONFIG_SYS_TEXT_BASE 0x60000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00) - -#define CONFIG_VERSION_VARIABLE -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMC_RESET_PIN 0x04000000 -#define CONFIG_CMC_RESET_TIMEOUT 3 - -#define CONFIG_HW_WATCHDOG -#define CONFIG_SYS_WDTTIMERBASE DAVINCI_TIMER1_BASE -#define CONFIG_SYS_WDT_PERIOD_LOW 0x0c000000 -#define CONFIG_SYS_WDT_PERIOD_HIGH 0x0 - -#define CONFIG_CMD_DATE -#define CONFIG_RTC_DAVINCI - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_MMC_MBLOCK -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC - -/* GPIO */ -#define CONFIG_ENBW_CMC_BOARD_TYPE 57 -#define CONFIG_ENBW_CMC_HW_ID_BIT0 39 -#define CONFIG_ENBW_CMC_HW_ID_BIT1 38 -#define CONFIG_ENBW_CMC_HW_ID_BIT2 35 - -/* FDT support */ -#define CONFIG_OF_LIBFDT - -/* LowLevel Init */ -/* PLL */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 0 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 /* 150MHz */ -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002 - -#define CONFIG_SYS_DA850_PLL0_PLLM 18 /* PLL0 -> 456 MHz */ -#define CONFIG_SYS_DA850_PLL1_PLLM 24 /* PLL1 -> 300 MHz */ - -/* DDR RAM */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ - DV_DDR_PHY_EXT_STRBEN | \ - (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR (0 | \ - (0 << DV_DDR_SDCR_DDR2TERM1_SHIFT) | \ - (0 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ - (0x1 << DV_DDR_SDCR_DDREN_SHIFT) | \ - (0x1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ - (0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) | \ - (0x1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ - (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ - (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ - (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR2 4 /* 13 row address bits */ - -/* - * freq = 150MHz -> t = 7ns - */ -#define CONFIG_SYS_DA850_DDR2_SDTIMR (0 | \ - (0x0d << DV_DDR_SDTMR1_RFC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RP_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RCD_SHIFT) | \ - (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ - (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ - (7 << DV_DDR_SDTMR1_RC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ - (readl(&dv_ddr2_regs_ctrl->sdtimr) & 0x4) | /* Reserved */ \ - ((2 - 1) << DV_DDR_SDTMR1_WTR_SHIFT)) - -/* - * freq = 150MHz -> t=7ns - */ -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (0 | \ - (readl(&dv_ddr2_regs_ctrl->sdtimr2) & 0x80000000) | /* Reserved */ \ - (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ - (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ - (15 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ - (27 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ - (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ - (2 << DV_DDR_SDTMR2_CKE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000407 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2 | \ - DAVINCI_SYSCFG_SUSPSRC_EMAC |\ - DAVINCI_SYSCFG_SUSPSRC_I2C) - -#define CONFIG_SYS_DA850_CS2CFG (DAVINCI_ABCR_WSETUP(2) | \ - DAVINCI_ABCR_WSTROBE(6) | \ - DAVINCI_ABCR_WHOLD(1) | \ - DAVINCI_ABCR_RSETUP(2) | \ - DAVINCI_ABCR_RSTROBE(6) | \ - DAVINCI_ABCR_RHOLD(1) | \ - DAVINCI_ABCR_ASIZE_16BIT) - -#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \ - DAVINCI_ABCR_WSTROBE(2) | \ - DAVINCI_ABCR_WHOLD(1) | \ - DAVINCI_ABCR_RSETUP(1) | \ - DAVINCI_ABCR_RSTROBE(6) | \ - DAVINCI_ABCR_RHOLD(1) | \ - DAVINCI_ABCR_ASIZE_8BIT) - -/* - * NOR Bootconfiguration word: - * Method: Direc boot - * EMIFA access mode: 16 Bit - */ -#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11) - -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY) -#define CONFIG_POST_EXTERNAL_WORD_FUNCS -#define CONFIG_SYS_POST_WORD_ADDR DAVINCI_RTC_BASE -#define CONFIG_LOGBUFFER -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE -#define CONFIG_SYS_BOOTCOUNT_BE - -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc0080000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x60004000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x70000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#endif /* __CONFIG_H */

This board has not been converted to generic board by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/Kconfig | 5 - board/esg/ima3-mx53/Kconfig | 15 --- board/esg/ima3-mx53/MAINTAINERS | 6 - board/esg/ima3-mx53/Makefile | 9 -- board/esg/ima3-mx53/ima3-mx53.c | 206 --------------------------------- board/esg/ima3-mx53/imximage.cfg | 104 ----------------- configs/ima3-mx53_defconfig | 6 - include/configs/ima3-mx53.h | 238 --------------------------------------- 8 files changed, 589 deletions(-) delete mode 100644 board/esg/ima3-mx53/Kconfig delete mode 100644 board/esg/ima3-mx53/MAINTAINERS delete mode 100644 board/esg/ima3-mx53/Makefile delete mode 100644 board/esg/ima3-mx53/ima3-mx53.c delete mode 100644 board/esg/ima3-mx53/imximage.cfg delete mode 100644 configs/ima3-mx53_defconfig delete mode 100644 include/configs/ima3-mx53.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fa52901..0b63698 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -475,10 +475,6 @@ config TARGET_M53EVK select CPU_V7 select SUPPORT_SPL

-config TARGET_IMA3_MX53 - bool "Support ima3-mx53" - select CPU_V7 - config TARGET_MX51EVK bool "Support mx51evk" select CPU_V7 @@ -894,7 +890,6 @@ source "board/davedenx/qong/Kconfig" source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" source "board/embest/mx6boards/Kconfig" -source "board/esg/ima3-mx53/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls2085aqds/Kconfig" source "board/freescale/ls2085ardb/Kconfig" diff --git a/board/esg/ima3-mx53/Kconfig b/board/esg/ima3-mx53/Kconfig deleted file mode 100644 index d73238f..0000000 --- a/board/esg/ima3-mx53/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_IMA3_MX53 - -config SYS_BOARD - default "ima3-mx53" - -config SYS_VENDOR - default "esg" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "ima3-mx53" - -endif diff --git a/board/esg/ima3-mx53/MAINTAINERS b/board/esg/ima3-mx53/MAINTAINERS deleted file mode 100644 index 96de081..0000000 --- a/board/esg/ima3-mx53/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IMA3-MX53 BOARD -#M: - -S: Maintained -F: board/esg/ima3-mx53/ -F: include/configs/ima3-mx53.h -F: configs/ima3-mx53_defconfig diff --git a/board/esg/ima3-mx53/Makefile b/board/esg/ima3-mx53/Makefile deleted file mode 100644 index afb8925..0000000 --- a/board/esg/ima3-mx53/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) 2012, Stefano Babic sbabic@denx.de -# -# Based on ti/evm/Makefile -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ima3-mx53.o diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c deleted file mode 100644 index df758ee..0000000 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * (C) Copyright 2012, Stefano Babic sbabic@denx.de - * - * (C) Copyright 2010 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux-mx53.h> -#include <asm/errno.h> -#include <netdev.h> -#include <mmc.h> -#include <fsl_esdhc.h> -#include <asm/gpio.h> - -/* NOR flash configuration */ -#define IMA3_MX53_CS0GCR1 (CSEN | DSZ(2)) -#define IMA3_MX53_CS0GCR2 0 -#define IMA3_MX53_CS0RCR1 (RCSN(2) | OEN(1) | RWSC(15)) -#define IMA3_MX53_CS0RCR2 0 -#define IMA3_MX53_CS0WCR1 (WBED1 | WCSN(2) | WEN(1) | WWSC(15)) -#define IMA3_MX53_CS0WCR2 0 - -DECLARE_GLOBAL_DATA_PTR; - -static void weim_nor_settings(void) -{ - struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR; - - writel(IMA3_MX53_CS0GCR1, &weim_regs->cs0gcr1); - writel(IMA3_MX53_CS0GCR2, &weim_regs->cs0gcr2); - writel(IMA3_MX53_CS0RCR1, &weim_regs->cs0rcr1); - writel(IMA3_MX53_CS0RCR2, &weim_regs->cs0rcr2); - writel(IMA3_MX53_CS0WCR1, &weim_regs->cs0wcr1); - writel(IMA3_MX53_CS0WCR2, &weim_regs->cs0wcr2); - writel(0x0, &weim_regs->wcr); - - set_chipselect_size(CS0_128); -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -static void setup_iomux_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT13__UART4_RXD_MUX, UART_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT12__UART4_TXD_MUX, UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), - NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR }; - -int board_mmc_getcd(struct mmc *mmc) -{ - int ret; - - ret = !gpio_get_value(IMX_GPIO_NR(1, 1)); - - return ret; -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) -#define SD_CD_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_HYS | PAD_CTL_PKE) - -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_GPIO_1__GPIO1_1, SD_CD_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); - gpio_direction_input(IMX_GPIO_NR(1, 1)); - - esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - return fsl_esdhc_initialize(bis, &esdhc_cfg); -} -#endif - -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) - -static void setup_iomux_spi(void) -{ - static const iomux_v3_cfg_t spi_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__ECSPI2_SCLK, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__ECSPI2_MOSI, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__ECSPI2_MISO, SPI_PAD_CTRL), - /* SSEL 0 */ - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__GPIO5_29, SPI_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); - gpio_direction_output(IMX_GPIO_NR(5, 29), 1); -} - -int board_early_init_f(void) -{ - /* configure I/O pads */ - setup_iomux_uart(); - setup_iomux_fec(); - - weim_nor_settings(); - - /* configure spi */ - setup_iomux_spi(); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - mxc_set_sata_internal_clock(); - - return 0; -} - -#if defined(CONFIG_RESET_PHY_R) -#include <miiphy.h> - -void reset_phy(void) -{ - unsigned short reg; - - /* reset the phy */ - miiphy_reset("FEC", CONFIG_PHY_ADDR); - - /* set hard link to 100Mbit, full-duplex */ - miiphy_read("FEC", CONFIG_PHY_ADDR, MII_BMCR, &reg); - reg &= ~BMCR_ANENABLE; - reg |= (BMCR_SPEED100 | BMCR_FULLDPLX); - miiphy_write("FEC", CONFIG_PHY_ADDR, MII_BMCR, reg); - - miiphy_read("FEC", CONFIG_PHY_ADDR, 0x16, &reg); - reg |= (1 << 5); - miiphy_write("FEC", CONFIG_PHY_ADDR, 0x16, reg); -} -#endif - -int checkboard(void) -{ - puts("Board: IMA3_MX53\n"); - - return 0; -} diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg deleted file mode 100644 index 324a90e..0000000 --- a/board/esg/ima3-mx53/imximage.cfg +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2012 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM nor - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -/* IOMUX for RAM only */ -DATA 4 0x53fa8554 0x300020 -DATA 4 0x53fa8560 0x300020 -DATA 4 0x53fa8594 0x300020 -DATA 4 0x53fa8584 0x300020 -DATA 4 0x53fa8558 0x300040 -DATA 4 0x53fa8568 0x300040 -DATA 4 0x53fa8590 0x300040 -DATA 4 0x53fa857c 0x300040 -DATA 4 0x53fa8564 0x300040 -DATA 4 0x53fa8580 0x300040 -DATA 4 0x53fa8570 0x300220 -DATA 4 0x53fa8578 0x300220 -DATA 4 0x53fa872c 0x300000 -DATA 4 0x53fa8728 0x300000 -DATA 4 0x53fa871c 0x300000 -DATA 4 0x53fa8718 0x300000 -DATA 4 0x53fa8574 0x300020 -DATA 4 0x53fa8588 0x300020 -DATA 4 0x53fa855c 0x0 -DATA 4 0x53fa858c 0x0 -DATA 4 0x53fa856c 0x300040 -DATA 4 0x53fa86f0 0x300000 -DATA 4 0x53fa8720 0x300000 -DATA 4 0x53fa86fc 0x0 -DATA 4 0x53fa86f4 0x0 -DATA 4 0x53fa8714 0x0 -DATA 4 0x53fa8724 0x4000000 - -/* DDR RAM */ -DATA 4 0x63fd9088 0x40404040 -DATA 4 0x63fd9090 0x40404040 -DATA 4 0x63fd907C 0x01420143 -DATA 4 0x63fd9080 0x01450146 -DATA 4 0x63fd9018 0x00111740 -DATA 4 0x63fd9000 0x84190000 - -/* esdcfgX */ -DATA 4 0x63fd900C 0x9f5152e3 -DATA 4 0x63fd9010 0xb68e8a63 -DATA 4 0x63fd9014 0x01ff00db - -/* Read/Write command delay */ -DATA 4 0x63fd902c 0x000026d2 - -/* Out of reset delays */ -DATA 4 0x63fd9030 0x00ff0e21 - -/* ESDCTL ODT timing control */ -DATA 4 0x63fd9008 0x12273030 - -/* ESDCTL power down control */ -DATA 4 0x63fd9004 0x0002002d - -/* Set registers in DDR memory chips */ -DATA 4 0x63fd901c 0x00008032 -DATA 4 0x63fd901c 0x00008033 -DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x052080b0 -DATA 4 0x63fd901c 0x04008040 - -/* ESDCTL refresh control */ -DATA 4 0x63fd9020 0x00005800 - -/* PHY ZQ HW control */ -DATA 4 0x63fd9040 0x05380003 - -/* PHY ODT control */ -DATA 4 0x63fd9058 0x00022222 - -/* start DDR3 */ -DATA 4 0x63fd901c 0x00000000 diff --git a/configs/ima3-mx53_defconfig b/configs/ima3-mx53_defconfig deleted file mode 100644 index 1f5e3a6..0000000 --- a/configs/ima3-mx53_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMA3_MX53=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg" -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="IMA3 MX53 U-Boot > " diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h deleted file mode 100644 index 2fa6c3d..0000000 --- a/include/configs/ima3-mx53.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * (C) Copyright 2012, Stefano Babic sbabic@denx.de - * - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX53-EVK Freescale board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SOC type must be included before imx-regs.h */ -#define CONFIG_MX53 -#include <asm/arch/imx-regs.h> - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_OF_LIBFDT - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) - -#define CONFIG_BOARD_EARLY_INIT_F - -/* Enable GPIOs */ -#define CONFIG_MXC_GPIO - -/* UART */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR - -/* MMC */ -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* Ethernet on FEC */ -#define CONFIG_MII - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x01 -#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR -#define CONFIG_RESET_PHY_R -#define CONFIG_FEC_MXC_NO_ANEG -#define CONFIG_ETHPRIME "FEC0" - -/* SPI */ -#define CONFIG_HARD_SPI -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 - -/* SPI FLASH - not used for environment */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_SF_DEFAULT_SPEED 25000000 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_GPIO - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ -#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */ - -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x70000000 -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nor0=f0000000.flash" - -/* FLASH and environment organization */ - -#define CONFIG_SYS_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */ -#define CONFIG_FLASH_CFI_MTD /* with MTD support */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 1024 - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define HOSTNAME ima3-mx53 - -#define CONFIG_HOSTNAME ima3-mx53 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram0 rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${console},${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "console=ttymxc3\0" \ - "loadaddr=70800000\0" \ - "kernel_addr_r=70800000\0" \ - "ramdisk_addr_r=71000000\0" \ - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ - "mmcargs=setenv bootargs root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs addip addtty addmtd addmisc mmcload;" \ - "bootm\0" \ - "mmcload=fatload mmc ${mmcdev}:${mmcpart} " \ - "${loadaddr} ${uimage}\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \ - "tftp ${kernel_addr_r} ${bootfile}\0" \ - "net_self=if run net_self_load;then " \ - "run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ - "else echo Images not loades;fi\0" \ - "satargs=setenv bootargs root=/dev/sda1\0" \ - "satafile=boot/uImage\0" \ - "ssdboot=echo Booting from ssd ...; " \ - "run satargs addip addtty addmtd addmisc;" \ - "sata init;ext2load sata 0:1 ${kernel_addr_r} " \ - "${satafile};bootm\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \ - "uimage=uImage\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "uboot_addr=0xf0001000\0" \ - "update=protect off 0xf0000000 +60000;" \ - "erase ${uboot_addr} +60000;" \ - "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "bootcmd=run net_nfs\0" - - -#define CONFIG_CMD_SATA -#ifdef CONFIG_CMD_SATA - #define CONFIG_DWC_AHSATA - #define CONFIG_SYS_SATA_MAX_DEVICE 1 - #define CONFIG_DWC_AHSATA_PORT_ID 0 - #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR - #define CONFIG_LBA48 - #define CONFIG_LIBATA -#endif - -#endif /* __CONFIG_H */

These boards have not been converted to generic board by the deadline. Remove them.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/Kconfig | 9 -- board/logicpd/imx27lite/Kconfig | 31 ------- board/logicpd/imx27lite/MAINTAINERS | 12 --- board/logicpd/imx27lite/Makefile | 9 -- board/logicpd/imx27lite/imx27lite.c | 77 ---------------- board/logicpd/imx27lite/lowlevel_init.S | 156 -------------------------------- configs/imx27lite_defconfig | 3 - configs/magnesium_defconfig | 3 - include/configs/imx27lite.h | 49 ---------- include/configs/magnesium.h | 58 ------------ 10 files changed, 407 deletions(-) delete mode 100644 board/logicpd/imx27lite/Kconfig delete mode 100644 board/logicpd/imx27lite/MAINTAINERS delete mode 100644 board/logicpd/imx27lite/Makefile delete mode 100644 board/logicpd/imx27lite/imx27lite.c delete mode 100644 board/logicpd/imx27lite/lowlevel_init.S delete mode 100644 configs/imx27lite_defconfig delete mode 100644 configs/magnesium_defconfig delete mode 100644 include/configs/imx27lite.h delete mode 100644 include/configs/magnesium.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0b63698..36ec100 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -142,14 +142,6 @@ config TARGET_APF27 select CPU_ARM926EJS select SUPPORT_SPL

-config TARGET_IMX27LITE - bool "Support imx27lite" - select CPU_ARM926EJS - -config TARGET_MAGNESIUM - bool "Support magnesium" - select CPU_ARM926EJS - config TARGET_APX4DEVKIT bool "Support apx4devkit" select CPU_ARM926EJS @@ -924,7 +916,6 @@ source "board/isee/igep0033/Kconfig" source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" source "board/kosagi/novena/Kconfig" -source "board/logicpd/imx27lite/Kconfig" source "board/logicpd/imx31_litekit/Kconfig" source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" diff --git a/board/logicpd/imx27lite/Kconfig b/board/logicpd/imx27lite/Kconfig deleted file mode 100644 index c7de2e3..0000000 --- a/board/logicpd/imx27lite/Kconfig +++ /dev/null @@ -1,31 +0,0 @@ -if TARGET_IMX27LITE - -config SYS_BOARD - default "imx27lite" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx27" - -config SYS_CONFIG_NAME - default "imx27lite" - -endif - -if TARGET_MAGNESIUM - -config SYS_BOARD - default "imx27lite" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx27" - -config SYS_CONFIG_NAME - default "magnesium" - -endif diff --git a/board/logicpd/imx27lite/MAINTAINERS b/board/logicpd/imx27lite/MAINTAINERS deleted file mode 100644 index a7b22ac..0000000 --- a/board/logicpd/imx27lite/MAINTAINERS +++ /dev/null @@ -1,12 +0,0 @@ -IMX27LITE BOARD -M: Wolfgang Denk wd@denx.de -S: Maintained -F: board/logicpd/imx27lite/ -F: include/configs/imx27lite.h -F: configs/imx27lite_defconfig - -MAGNESIUM BOARD -M: Heiko Schocher hs@denx.de -S: Maintained -F: include/configs/magnesium.h -F: configs/magnesium_defconfig diff --git a/board/logicpd/imx27lite/Makefile b/board/logicpd/imx27lite/Makefile deleted file mode 100644 index 50a3da6..0000000 --- a/board/logicpd/imx27lite/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx27lite.o -obj-y += lowlevel_init.o diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c deleted file mode 100644 index 07b07a0..0000000 --- a/board/logicpd/imx27lite/imx27lite.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) 2007 Sascha Hauer, Pengutronix - * Copyright (C) 2008,2009 Eric Jarrige jorasse@users.sourceforge.net - * Copyright (C) 2009 Ilya Yanok yanok@emcraft.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/gpio.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ -#if defined(CONFIG_SYS_NAND_LARGEPAGE) - struct system_control_regs *sc_regs = - (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; -#endif - - gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - -#ifdef CONFIG_MXC_UART - mx27_uart1_init_pins(); -#endif -#ifdef CONFIG_FEC_MXC - mx27_fec_init_pins(); - imx_gpio_mode((GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31)); - gpio_set_value(GPIO_PORTC | 31, 1); -#endif -#ifdef CONFIG_MXC_MMC -#if defined(CONFIG_MAGNESIUM) - mx27_sd1_init_pins(); -#else - mx27_sd2_init_pins(); -#endif -#endif - -#if defined(CONFIG_SYS_NAND_LARGEPAGE) - /* - * set in FMCR NF_FMS Bit(5) to 1 - * (NAND Flash with 2 Kbyte page size) - */ - writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr); -#endif - return 0; -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); -#if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); -#endif -} - -int checkboard(void) -{ - puts("Board: "); - puts(CONFIG_BOARDNAME); - return 0; -} diff --git a/board/logicpd/imx27lite/lowlevel_init.S b/board/logicpd/imx27lite/lowlevel_init.S deleted file mode 100644 index 9cb702f..0000000 --- a/board/logicpd/imx27lite/lowlevel_init.S +++ /dev/null @@ -1,156 +0,0 @@ -/* - * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia - * Applications Processor Reference Manual, Rev. 0.2". - * - * (C) Copyright 2008 Eric Jarrige eric.jarrige@armadeus.org - * (C) Copyright 2009 Ilya Yanok yanok@emcraft.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <config.h> -#include <asm/macro.h> -#include <asm/arch/imx-regs.h> -#include <generated/asm-offsets.h> - -SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE -SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE -SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0) -SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3) -SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL - -.macro init_aipi - /* - * setup AIPI1 and AIPI2 - */ - write32 AIPI1_PSR0, AIPI1_PSR0_VAL - write32 AIPI1_PSR1, AIPI1_PSR1_VAL - write32 AIPI2_PSR0, AIPI2_PSR0_VAL - write32 AIPI2_PSR1, AIPI2_PSR1_VAL - -.endm /* init_aipi */ - -.macro init_clock - ldr r0, =CSCR - /* disable MPLL/SPLL first */ - ldr r1, [r0] - bic r1, r1, #(CSCR_MPEN|CSCR_SPEN) - str r1, [r0] - - write32 MPCTL0, MPCTL0_VAL - write32 SPCTL0, SPCTL0_VAL - - write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART - - /* - * add some delay here - */ - wait_timer 0x1000 - - /* peripheral clock divider */ - write32 PCDR0, PCDR0_VAL - write32 PCDR1, PCDR1_VAL - - /* Configure PCCR0 and PCCR1 */ - write32 PCCR0, PCCR0_VAL - write32 PCCR1, PCCR1_VAL - -.endm /* init_clock */ - -.macro sdram_init - ldr r0, SOC_ESDCTL_BASE_W - mov r2, #PHYS_SDRAM_1 - - /* Do initial reset */ - mov r1, #ESDMISC_MDDR_DL_RST - str r1, [r0, #ESDMISC_ROF] - - /* Hold for more than 200ns */ - wait_timer 0x10000 - - /* Activate LPDDR iface */ - mov r1, #ESDMISC_MDDREN - str r1, [r0, #ESDMISC_ROF] - - /* Check The chip version TO1 or TO2 */ - ldr r1, SOC_SI_ID_REG_W - ldr r1, [r1] - ands r1, r1, #0xF0000000 - /* add Latency on CAS only for TO2 */ - ldreq r1, SDRAM_ESDCFG_T2_W - ldrne r1, SDRAM_ESDCFG_T1_W - str r1, [r0, #ESDCFG0_ROF] - - /* Run initialization sequence */ - ldr r1, SDRAM_PRECHARGE_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_AUTOREF_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_LOADMODE_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] - add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL - ldrb r1, [r3] - - ldr r1, SDRAM_NORMAL_CMD_W - str r1, [r0, #ESDCTL0_ROF] - -#if (CONFIG_NR_DRAM_BANKS > 1) - /* 2nd sdram */ - mov r2, #PHYS_SDRAM_2 - - /* Check The chip version TO1 or TO2 */ - ldr r1, SOC_SI_ID_REG_W - ldr r1, [r1] - ands r1, r1, #0xF0000000 - /* add Latency on CAS only for TO2 */ - ldreq r1, SDRAM_ESDCFG_T2_W - ldrne r1, SDRAM_ESDCFG_T1_W - str r1, [r0, #ESDCFG1_ROF] - - /* Run initialization sequence */ - ldr r1, SDRAM_PRECHARGE_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_AUTOREF_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_LOADMODE_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] - add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL - ldrb r1, [r3] - - ldr r1, SDRAM_NORMAL_CMD_W - str r1, [r0, #ESDCTL1_ROF] -#endif /* CONFIG_NR_DRAM_BANKS > 1 */ - -.endm /* sdram_init */ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - init_aipi - - init_clock - - sdram_init - - mov pc,r10 diff --git a/configs/imx27lite_defconfig b/configs/imx27lite_defconfig deleted file mode 100644 index b02955d..0000000 --- a/configs/imx27lite_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX27LITE=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/magnesium_defconfig b/configs/magnesium_defconfig deleted file mode 100644 index 2fa6589..0000000 --- a/configs/magnesium_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_MAGNESIUM=y -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h deleted file mode 100644 index c18c35e..0000000 --- a/include/configs/imx27lite.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2009 Ilya Yanok yanok@emcraft.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* include common defines/options for all imx27lite related boards */ -#include "imx27lite-common.h" -/* - * SoC Configuration - */ -#define CONFIG_IMX27LITE -#define CONFIG_HOSTNAME imx27 -#define CONFIG_BOARDNAME "LogicPD imx27lite\n" - -/* - * Flash & Environment - */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */ -#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000) -#define PHYS_FLASH_SIZE 0x200000 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */ - -/* - * SD/MMC - */ -#define CONFIG_MXC_MCI_REGS_BASE 0x10014000 - -/* - * MTD partitions - */ -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=" \ - "physmap-flash.0:" \ - "256k(U-Boot)," \ - "1664k(user)," \ - "64k(env1)," \ - "64k(env2);" \ - "mxc_nand.0:" \ - "128k(IPL-SPL)," \ - "4m(kernel)," \ - "22m(rootfs)," \ - "-(userfs)" - -#endif /* __CONFIG_H */ diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h deleted file mode 100644 index 3364bde..0000000 --- a/include/configs/magnesium.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2010 Heiko Schocher hs@denx.de - * - * based on: - * Copyright (C) 2009 Ilya Yanok yanok@emcraft.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* include common defines/options for all imx27lite related boards */ -#include "imx27lite-common.h" - -/* - * SoC Configuration - */ -#define CONFIG_MAGNESIUM -#define CONFIG_HOSTNAME magnesium -#define CONFIG_BOARDNAME "Projectiondesign magnesium\n" - -/* - * Flash & Environment - */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */ -#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000) -#define PHYS_FLASH_SIZE 0x800000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */ - -/* - * NAND - */ -#define CONFIG_SYS_NAND_LARGEPAGE - -/* - * SD/MMC - */ -#define CONFIG_MXC_MCI_REGS_BASE 0x10013000 - -/* - * MTD partitions - */ -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=" \ - "physmap-flash.0:" \ - "256k(U-Boot)," \ - "7680k(user)," \ - "128k(env1)," \ - "128k(env2);" \ - "mxc_nand.0:" \ - "128k(IPL-SPL)," \ - "4m(kernel)," \ - "22m(rootfs)," \ - "-(userfs)" - -#endif /* __CONFIG_H */

This board has not been converted to generic board by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/Kconfig | 5 - board/logicpd/imx31_litekit/Kconfig | 15 --- board/logicpd/imx31_litekit/MAINTAINERS | 6 - board/logicpd/imx31_litekit/Makefile | 9 -- board/logicpd/imx31_litekit/imx31_litekit.c | 91 --------------- board/logicpd/imx31_litekit/lowlevel_init.S | 87 -------------- configs/imx31_litekit_defconfig | 4 - include/configs/imx31_litekit.h | 171 ---------------------------- 8 files changed, 388 deletions(-) delete mode 100644 board/logicpd/imx31_litekit/Kconfig delete mode 100644 board/logicpd/imx31_litekit/MAINTAINERS delete mode 100644 board/logicpd/imx31_litekit/Makefile delete mode 100644 board/logicpd/imx31_litekit/imx31_litekit.c delete mode 100644 board/logicpd/imx31_litekit/lowlevel_init.S delete mode 100644 configs/imx31_litekit_defconfig delete mode 100644 include/configs/imx31_litekit.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 36ec100..9016bfd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -250,10 +250,6 @@ config TARGET_TT01 bool "Support tt01" select CPU_ARM1136

-config TARGET_IMX31_LITEKIT - bool "Support imx31_litekit" - select CPU_ARM1136 - config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 @@ -916,7 +912,6 @@ source "board/isee/igep0033/Kconfig" source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" source "board/kosagi/novena/Kconfig" -source "board/logicpd/imx31_litekit/Kconfig" source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" diff --git a/board/logicpd/imx31_litekit/Kconfig b/board/logicpd/imx31_litekit/Kconfig deleted file mode 100644 index d90f854..0000000 --- a/board/logicpd/imx31_litekit/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_IMX31_LITEKIT - -config SYS_BOARD - default "imx31_litekit" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "imx31_litekit" - -endif diff --git a/board/logicpd/imx31_litekit/MAINTAINERS b/board/logicpd/imx31_litekit/MAINTAINERS deleted file mode 100644 index 8e3608e..0000000 --- a/board/logicpd/imx31_litekit/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IMX31_LITEKIT BOARD -#M: - -S: Maintained -F: board/logicpd/imx31_litekit/ -F: include/configs/imx31_litekit.h -F: configs/imx31_litekit_defconfig diff --git a/board/logicpd/imx31_litekit/Makefile b/board/logicpd/imx31_litekit/Makefile deleted file mode 100644 index 3fd71c8..0000000 --- a/board/logicpd/imx31_litekit/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx31_litekit.o -obj-y += lowlevel_init.o diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c deleted file mode 100644 index 386e106..0000000 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer s.hauer@pengutronix.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <common.h> -#include <netdev.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -int board_early_init_f(void) -{ - /* CS0: Nor Flash */ - static const struct mxc_weimcs cs0 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(10, 0, 3, 3, 0, 1, 5, 0, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 0, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - /* CS4: Network Controller */ - static const struct mxc_weimcs cs4 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) - }; - - mxc_setup_weimcs(0, &cs0); - mxc_setup_weimcs(4, &cs4); - - /* setup pins for UART1 */ - mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); - mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); - mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); - mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); - - /* SPI2 */ - mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B); - mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); - mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); - mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); - mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); - mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); - mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B); - - /* start SPI2 clock */ - __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ - - return 0; -} - -int checkboard(void) -{ - printf("Board: i.MX31 Litekit\n"); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} diff --git a/board/logicpd/imx31_litekit/lowlevel_init.S b/board/logicpd/imx31_litekit/lowlevel_init.S deleted file mode 100644 index 7c456bc..0000000 --- a/board/logicpd/imx31_litekit/lowlevel_init.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer s.hauer@pengutronix.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/imx-regs.h> - -.macro REG reg, val - ldr r2, =\reg - ldr r3, =\val - str r3, [r2] -.endm - -.macro REG8 reg, val - ldr r2, =\reg - ldr r3, =\val - strb r3, [r2] -.endm - -.macro DELAY loops - ldr r2, =\loops -1: - subs r2, r2, #1 - nop - bcs 1b -.endm - -.globl lowlevel_init -lowlevel_init: - - REG IPU_CONF, IPU_CONF_DI_EN - REG CCM_CCMR, 0x074B0BF5 - - DELAY 0x40000 - - REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE - REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS - - REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | PDR0_MCU_PODF(0) - - REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | PLL_MFN(0x23) - REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) - - REG 0x43FAC26C, 0 /* SDCLK */ - REG 0x43FAC270, 0 /* CAS */ - REG 0x43FAC274, 0 /* RAS */ - REG 0x43FAC27C, 0x1000 /* CS2 (CSD0) */ - REG 0x43FAC284, 0 /* DQM3 */ - REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ - REG 0x43FAC28C, 0 - REG 0x43FAC290, 0 - REG 0x43FAC294, 0 - REG 0x43FAC298, 0 - REG 0x43FAC29C, 0 - REG 0x43FAC2A0, 0 - REG 0x43FAC2A4, 0 - REG 0x43FAC2A8, 0 - REG 0x43FAC2AC, 0 - REG 0x43FAC2B0, 0 - REG 0x43FAC2B4, 0 - REG 0x43FAC2B8, 0 - REG 0x43FAC2BC, 0 - REG 0x43FAC2C0, 0 - REG 0x43FAC2C4, 0 - REG 0x43FAC2C8, 0 - REG 0x43FAC2CC, 0 - REG 0x43FAC2D0, 0 - REG 0x43FAC2D4, 0 - REG 0x43FAC2D8, 0 - REG 0x43FAC2DC, 0 - REG 0xB8001010, 0x00000004 - REG 0xB8001004, 0x006ac73a - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - REG 0xB8001000, 0x82226080 - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c - - mov pc, lr diff --git a/configs/imx31_litekit_defconfig b/configs/imx31_litekit_defconfig deleted file mode 100644 index f10759b..0000000 --- a/configs/imx31_litekit_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX31_LITEKIT=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="uboot> " diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h deleted file mode 100644 index 23e3a6c..0000000 --- a/include/configs/imx31_litekit.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff r-woodruff2@ti.com - * Kshitij Gupta kshitij@ti.com - * - * Configuration settings for the LogicPD i.MX31 Litekit board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - - /* High Level Configuration Options */ -#define CONFIG_MX31 1 /* This is a mx31 */ -#define CONFIG_MX31_CLK32 32000 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#define CONFIG_MACH_TYPE MACH_TYPE_MX31LITE - -/* Temporarily disabled */ -#if 0 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 -#endif - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_MXC_GPIO - -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SPI -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.23.168 -#define CONFIG_SERVERIP 192.168.23.2 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 uImage-mx31; bootm\0" \ - "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0" - - -#define CONFIG_SMC911X 1 -#define CONFIG_SMC911X_BASE (CS4_BASE + 0x00020000) -#define CONFIG_SMC911X_32_BIT 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ - -#define CONFIG_CMDLINE_EDITING 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x001f0000) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_SIZE (64 * 1024) - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* - * JFFS2 partitions - */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" - -/* - * NAND flash - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC - -#endif /* __CONFIG_H */

This board has not been converted to generic board by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

configs/inetspace_v2_defconfig | 8 -------- 1 file changed, 8 deletions(-) delete mode 100644 configs/inetspace_v2_defconfig

diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig deleted file mode 100644 index f314059..0000000 --- a/configs/inetspace_v2_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y

This board has not been converted to generic board by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/Kconfig | 5 -- board/jornada/Kconfig | 9 --- board/jornada/MAINTAINERS | 6 -- board/jornada/Makefile | 11 --- board/jornada/jornada.c | 44 ----------- board/jornada/setup.S | 194 ---------------------------------------------- configs/jornada_defconfig | 9 --- include/configs/jornada.h | 123 ----------------------------- 8 files changed, 401 deletions(-) delete mode 100644 board/jornada/Kconfig delete mode 100644 board/jornada/MAINTAINERS delete mode 100644 board/jornada/Makefile delete mode 100644 board/jornada/jornada.c delete mode 100644 board/jornada/setup.S delete mode 100644 configs/jornada_defconfig delete mode 100644 include/configs/jornada.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9016bfd..c8b07a1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -774,10 +774,6 @@ config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA

-config TARGET_JORNADA - bool "Support jornada" - select CPU_SA1100 - config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" select CPU_V7 @@ -909,7 +905,6 @@ source "board/hale/tt01/Kconfig" source "board/icpdas/lp8x4x/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" -source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" source "board/kosagi/novena/Kconfig" source "board/maxbcm/Kconfig" diff --git a/board/jornada/Kconfig b/board/jornada/Kconfig deleted file mode 100644 index 195bc26..0000000 --- a/board/jornada/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_JORNADA - -config SYS_BOARD - default "jornada" - -config SYS_CONFIG_NAME - default "jornada" - -endif diff --git a/board/jornada/MAINTAINERS b/board/jornada/MAINTAINERS deleted file mode 100644 index c77d745..0000000 --- a/board/jornada/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -JORNADA BOARD -M: Kristoffer Ericson kristoffer.ericson@gmail.com -S: Maintained -F: board/jornada/ -F: include/configs/jornada.h -F: configs/jornada_defconfig diff --git a/board/jornada/Makefile b/board/jornada/Makefile deleted file mode 100644 index 6a6fbf3..0000000 --- a/board/jornada/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# 2004 (c) MontaVista Software, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := jornada.o -obj-y += setup.o diff --git a/board/jornada/jornada.c b/board/jornada/jornada.c deleted file mode 100644 index ff6dbf0..0000000 --- a/board/jornada/jornada.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * 2004 (c) MontaVista Software, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <SA-1100.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_JORNADA720; - gd->bd->bi_boot_params = 0xc0000100; - - - /* - * Turn on flashing. - * Would be nice to have some protection but - * that would have to be implemented in the - * flash init function, which isnt possible yet. - */ - PPSR |= (1 << 7); - PPDR |= (1 << 7); - - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - - return (0); -} diff --git a/board/jornada/setup.S b/board/jornada/setup.S deleted file mode 100644 index da9f006..0000000 --- a/board/jornada/setup.S +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * 2004 (c) MontaVista Software, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include "config.h" -#include "version.h" - - -/*----------------------------------------------------------------------- - * Board defines: - */ - -#define MDCNFG 0x00 -#define MDCAS00 0x04 -#define MDCAS01 0x08 -#define MDCAS02 0x0C -#define MSC0 0x10 -#define MSC1 0x14 -#define MECR 0x18 -#define MDREFR 0x1C -#define MDCAS20 0x20 -#define MDCAS21 0x24 -#define MDCAS22 0x28 -#define MSC2 0x2C -#define SMCNFG 0x30 - -#define GPDR 0x04 -#define GPSR 0x08 -#define GPCR 0x0C -#define GAFR 0x1C - -#define PPDR 0x00 -#define PPSR 0x04 -#define PPAR 0x08 - -#define MDREFR_TRASR(n_) (n_ & (0x0000000f)) -#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4) -#define MDREFR_K0DB2 (1 << 18) -#define MDREFR_K1DB2 (1 << 22) -#define MDREFR_K2DB2 (1 << 26) - -#define MDREFR_K0RUN (1 << 17) -#define MDREFR_K1RUN (1 << 21) -#define MDREFR_K2RUN (1 << 25) - -#define MDREFR_SLFRSH (1 << 31) -#define MDREFR_E1PIN (1 << 20) - -#define PSSR 0x04 -#define PSSR_DH 0x00000008 -#define POSR 0x08 -#define RCSR 0x04 - -/*----------------------------------------------------------------------- - * Setup parameters for the board: - */ -MEM_BASE: .long 0xa0000000 -MEM_START: .long 0xc0000000 -PWR_BASE: .word 0x90020000 -RST_BASE: .long 0x90030000 -PPC_BASE: .long 0x90060000 -GPIO_BASE: .long 0x90040000 -IC_BASE: .word 0x90050000 - -cpuspeed: .word 0xa0 -/* calculated from old blob bootloader */ -mdcnfg: .long 0x00037267 /* mdcnfg 0x00037267 */ -mdcas00: .long 0x5555557f /* mdcas00 0x5555557f */ -mdcas01: .long 0x55555555 /* mdcas01 0x55555555 */ -mdcas02: .long 0x55555555 /* mdcas02 0x55555555 */ -msc0: .long 0xfff04f78 /* msc0 0xfff04f78 */ -msc1: .long 0xfff8fff0 /* msc1 0xfff8fff0 */ -mecr: .long 0x98c698c6 /* mecr 0x98c698c6 */ -mdrefr: .long 0x067600c7 /* mdrefr 0x04340327 */ -mdcas20: .long 0xd1284142 /* mdcas20 0xd1284142 */ -mdcas21: .long 0x72249529 /* mdcas21 0x72249529 */ -mdcas22: .long 0x78414351 /* mdcas22 0x78414351 */ -msc2: .long 0x201d2959 /* msc2 0x201d2959 */ -smcnfg: .long 0x00000000 /* smcnfg 0x00000000 */ - -pin_set_out: .long 0x37ff70 -pin_set_dir: .long 0x11480 - -gpdr_set: .long 0x0B3A0900 -gpsr_set: .long 0x02100800 -gpcr_set: .long 0x092A0100 -gafr_set: .long 0x08600000 - -.globl lowlevel_init -lowlevel_init: - - - /* this is required for flashing */ - ldr r0, PPC_BASE - ldr r1, pin_set_out - str r1, [r0, #PPSR] - ldr r1, pin_set_dir - str r1, [r0, #PPDR] - - /* Setting up the memory and stuff */ - /***********************************/ - - ldr r0, MEM_BASE - - ldr r1, mdcnfg - str r1, [r0, #MDCNFG] - ldr r1, mdcas00 - str r1, [r0, #MDCAS00] - ldr r1, mdcas01 - str r1, [r0, #MDCAS01] - ldr r1, mdcas02 - str r1, [r0, #MDCAS02] - ldr r1, mdcas20 - str r1, [r0, #MDCAS20] - ldr r1, mdcas21 - str r1, [r0, #MDCAS21] - ldr r1, mdcas22 - str r1, [r0, #MDCAS22] - - /* clear kxDB2 */ - ldr r2, [r0, #MDREFR] - bic r2, r2, #MDREFR_K0DB2 - bic r2, r2, #MDREFR_K1DB2 - bic r2, r2, #MDREFR_K2DB2 - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_TRASR(7) - - mov r4, #0x2000 - spin: subs r4, r4, #1 - bne spin - - ldr r1, PWR_BASE - mov r2, #PSSR_DH - str r2, [r1, #PSSR] - - ldr r2, [r0, #MDREFR] - bic r2, r2, #MDREFR_K0DB2 - bic r2, r2, #MDREFR_K1DB2 - bic r2, r2, #MDREFR_K2DB2 - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_TRASR(7) - orr r2, r2, #MDREFR_DRI(12) - orr r2, r2, #MDREFR_K0DB2 - orr r2, r2, #MDREFR_K1DB2 - orr r2, r2, #MDREFR_K2DB2 - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_K0RUN - orr r2, r2, #MDREFR_K1RUN - orr r2, r2, #MDREFR_K2RUN - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - bic r2, r2, #MDREFR_SLFRSH - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_E1PIN - str r2, [r0, #MDREFR] - - ldr r2, MEM_START -.rept 8 - ldr r3, [r2] -.endr - - ldr r2, [r0, #MDCNFG] - orr r2, r2, #0x00000003 - orr r2, r2, #0x00030000 - str r2, [r0, #MDCNFG] - - ldr r1, msc0 - str r1, [r0, #MSC0] - ldr r1, msc1 - str r1, [r0, #MSC1] - ldr r1, msc2 - str r1, [r0, #MSC2] - ldr r1, smcnfg - str r1, [r0, #SMCNFG] - ldr r1, mecr - str r1, [r0, #MECR] - - mov pc, lr diff --git a/configs/jornada_defconfig b/configs/jornada_defconfig deleted file mode 100644 index 65cbc2a..0000000 --- a/configs/jornada_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_JORNADA=y -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -# CONFIG_CMD_MISC is not set -CONFIG_SYS_PROMPT="HP Jornada# " diff --git a/include/configs/jornada.h b/include/configs/jornada.h deleted file mode 100644 index 3090476..0000000 --- a/include/configs/jornada.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Copyright 2010 (C) - * Kristoffer Ericson kristoffer.ericson@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SA1110 1 /* This is an SA110 CPU */ -#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_SYS_TEXT_BASE 0xC1F00000 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* Console setting */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * select serial console configuration - */ -#define CONFIG_SA1100_SERIAL 1 -#define CONFIG_SERIAL3 1 /* we use serial 3 */ -#define CONFIG_BAUDRATE 19200 -#define CONFIG_LOADS_ECHO 1 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_JFFS2 - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1" -#define CONFIG_BOOTCOMMAND "run boot_kernel" -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ -#define CONFIG_SYS_LOAD_ADDR 0xc0000000 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* console buffsize */ -#define CONFIG_SYS_PBSIZE (256+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */ -#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ -#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 } - -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_ERASE_TOUT (4096) -#define CONFIG_SYS_FLASH_WRITE_TOUT (4096) -#define CONFIG_SYS_FLASH_INCREMENT 0x02000000 -#define PHYS_FLASH_1 0x00000000 /* starts at 0x0 */ -#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256KB Sectors */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 260 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_FLASH_SHOW_PROGRESS 1 - -/* Environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x00040000 -#define CONFIG_ENV_OFFSET 0x00040000 -#define CONFIG_ENV_SIZE 0x00040000 -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - Monitor - 0x00000000 - 0x00040000 (256kb) - Environment - 0x00040000 - 0x00080000 (256kb) - Kernel - 0x00080000 - 0x00380000 (3mb) - Rootfs - 0x00380000 - 0x........ (rest) -*/ - -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CONFIG_SYS_INIT_SP_ADDR 0x0 -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2 0xc4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=jornada7xx-0" -#define MTDPARTS_DEFAULT "mtdparts=jornada7xx-0:256k(u-boot),256k(env),"\ - "3m(kernel),-(user);" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "flash_kernel=protect off all; " \ - "erase 00080000 0037ffff;cp.b c0000000 00080000 00300000;\0" \ - "flash_uboot=protect off all; " \ - "erase 00000000 0003ffff;cp.b c0000000 00000000 00040000;\0" \ - "boot_kernel=cp.b 00080000 c0000000 00300000;bootm;\0" -#endif /* __CONFIG_H */

This board has not been converted to generic board by the deadline. Remove it.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/Kconfig | 5 - board/icpdas/lp8x4x/Kconfig | 12 -- board/icpdas/lp8x4x/MAINTAINERS | 6 - board/icpdas/lp8x4x/Makefile | 9 -- board/icpdas/lp8x4x/lp8x4x.c | 128 --------------------- configs/lp8x4x_defconfig | 4 - include/configs/lp8x4x.h | 238 ---------------------------------------- 7 files changed, 402 deletions(-) delete mode 100644 board/icpdas/lp8x4x/Kconfig delete mode 100644 board/icpdas/lp8x4x/MAINTAINERS delete mode 100644 board/icpdas/lp8x4x/Makefile delete mode 100644 board/icpdas/lp8x4x/lp8x4x.c delete mode 100644 configs/lp8x4x_defconfig delete mode 100644 include/configs/lp8x4x.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c8b07a1..62b28d9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -766,10 +766,6 @@ config TARGET_ZIPITZ2 bool "Support zipitz2" select CPU_PXA

-config TARGET_LP8X4X - bool "Support lp8x4x" - select CPU_PXA - config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA @@ -902,7 +898,6 @@ source "board/genesi/mx51_efikamx/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hale/tt01/Kconfig" -source "board/icpdas/lp8x4x/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" source "board/karo/tx25/Kconfig" diff --git a/board/icpdas/lp8x4x/Kconfig b/board/icpdas/lp8x4x/Kconfig deleted file mode 100644 index 3e87c40..0000000 --- a/board/icpdas/lp8x4x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_LP8X4X - -config SYS_BOARD - default "lp8x4x" - -config SYS_VENDOR - default "icpdas" - -config SYS_CONFIG_NAME - default "lp8x4x" - -endif diff --git a/board/icpdas/lp8x4x/MAINTAINERS b/board/icpdas/lp8x4x/MAINTAINERS deleted file mode 100644 index 90a82e3..0000000 --- a/board/icpdas/lp8x4x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -LP8X4X BOARD -M: Sergey Yanovich ynvich@gmail.com -S: Maintained -F: board/icpdas/lp8x4x/ -F: include/configs/lp8x4x.h -F: configs/lp8x4x_defconfig diff --git a/board/icpdas/lp8x4x/Makefile b/board/icpdas/lp8x4x/Makefile deleted file mode 100644 index 88e0606..0000000 --- a/board/icpdas/lp8x4x/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# ICPDAS LP-8x4x Support -# -# Copyright (C) 2013 Sergey Yanovich ynvich@gmail.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := lp8x4x.o diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c deleted file mode 100644 index a136dc4..0000000 --- a/board/icpdas/lp8x4x/lp8x4x.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * ICP DAS LP-8x4x Support - * - * Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com - * adapted from Voipac PXA270 Support by - * Copyright (C) 2013 Sergey Yanovich ynvich@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/regs-mmc.h> -#include <asm/arch/pxa.h> -#include <netdev.h> -#include <serial.h> -#include <asm/io.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - if (index !=0 || init != USB_INIT_HOST) - return -1; - - writel(readl(CKEN) | CKEN10_USBHOST, CKEN); - - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - continue; /* required by checkpath.pl */ - - writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR); - writel(readl(UHCRHDA) & ~(0x1000), UHCRHDA); - writel(readl(UHCRHDA) | 0x800, UHCRHDA); - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA); - writel(readl(UHCRHDA) | 0x100, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - return 0; -} - -int usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(UHCHR) | UHCHR_SSEP0 | UHCHR_SSE, UHCHR); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - if (index !=0 || init != USB_INIT_HOST) - return -1; - - return usb_board_stop(); -} -#endif - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif diff --git a/configs/lp8x4x_defconfig b/configs/lp8x4x_defconfig deleted file mode 100644 index 63bbcca..0000000 --- a/configs/lp8x4x_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LP8X4X=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h deleted file mode 100644 index 10a7b05..0000000 --- a/include/configs/lp8x4x.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * ICP DAS LP-8x4x configuration file - * - * Copyright (C) 2013 Sergey Yanovich ynvich@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */ -#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */ -#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "bootm 80000 - 240000;" - -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \ - "init=/sbin/init rootfstype=ext4 rootwait" - -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_LZMA /* LZMA compression support */ -#define CONFIG_OF_LIBFDT - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB -#undef CONFIG_LCD -#undef CONFIG_CMD_IDE - -/* - * Networking Configuration - * chip on the ICPDAS LINPAC board - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x0C000000 -#define DM9000_IO 0x0C000000 -#define DM9000_DATA 0x0C004000 -#define DM9000_IO_2 0x0D000000 -#define DM9000_DATA_2 0x0D004000 -#define CONFIG_NET_RETRY_COUNT 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#endif - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE 1 - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa0008000 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -/* Use first 64kb bank of the internal SRAM */ -#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 - -/* - * NOR FLASH - */ -#define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x40000 - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } - -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x0808c014 -#define CONFIG_SYS_GPSR1_VAL 0x00cf0002 -#define CONFIG_SYS_GPSR2_VAL 0x0221c000 -#define CONFIG_SYS_GPSR3_VAL 0x00020000 - -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x0000ab80 -#define CONFIG_SYS_GPCR2_VAL 0x00100000 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab83 -#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff -#define CONFIG_SYS_GPDR3_VAL 0x00021b81 - -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018 -#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x55f9a402 -#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c -#define CONFIG_SYS_GAFR3_U_VAL 0x00001599 - -#define CONFIG_SYS_PSSR_VAL 0x32 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x005002c0 -#define CONFIG_SYS_CCCR 0x02000290 -#define CONFIG_SYS_CLKCFG 0x0000000b - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2 -#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc -#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_MDREFR_VAL 0x2093e018 -#define CONFIG_SYS_MDCNFG_VAL 0x890009d1 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x0000c497 -#define CONFIG_SYS_MCMEM1_VAL 0x0000c497 -#define CONFIG_SYS_MCATT0_VAL 0x0000c497 -#define CONFIG_SYS_MCATT1_VAL 0x0000c497 -#define CONFIG_SYS_MCIO0_VAL 0x00008407 -#define CONFIG_SYS_MCIO1_VAL 0x00008407 - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_VOIPAC_LCD -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x" -#define CONFIG_USB_STORAGE -#endif - -#endif /* __CONFIG_H */

These boards have not been converted to generic board by the deadline. Remove them.

Signed-off-by: Simon Glass sjg@chromium.org ---

arch/arm/mach-at91/Kconfig | 5 - board/esd/meesc/Kconfig | 12 -- board/esd/meesc/MAINTAINERS | 7 - board/esd/meesc/Makefile | 13 -- board/esd/meesc/meesc.c | 271 -------------------------------------- board/esd/meesc/partition.c | 23 ---- configs/meesc_dataflash_defconfig | 9 -- configs/meesc_defconfig | 9 -- include/configs/meesc.h | 199 ---------------------------- 9 files changed, 548 deletions(-) delete mode 100644 board/esd/meesc/Kconfig delete mode 100644 board/esd/meesc/MAINTAINERS delete mode 100644 board/esd/meesc/Makefile delete mode 100644 board/esd/meesc/meesc.c delete mode 100644 board/esd/meesc/partition.c delete mode 100644 configs/meesc_dataflash_defconfig delete mode 100644 configs/meesc_defconfig delete mode 100644 include/configs/meesc.h

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index de06416..d2d60f3 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -99,10 +99,6 @@ config TARGET_VL_MA2SC bool "Support vl_ma2sc" select CPU_ARM926EJS

-config TARGET_MEESC - bool "Support meesc" - select CPU_ARM926EJS - config TARGET_OTC570 bool "Support otc570" select CPU_ARM926EJS @@ -143,7 +139,6 @@ source "board/bluewater/snapper9260/Kconfig" source "board/BuS/vl_ma2sc/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/egnite/ethernut5/Kconfig" -source "board/esd/meesc/Kconfig" source "board/esd/otc570/Kconfig" source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" diff --git a/board/esd/meesc/Kconfig b/board/esd/meesc/Kconfig deleted file mode 100644 index 150348a..0000000 --- a/board/esd/meesc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MEESC - -config SYS_BOARD - default "meesc" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "meesc" - -endif diff --git a/board/esd/meesc/MAINTAINERS b/board/esd/meesc/MAINTAINERS deleted file mode 100644 index 9403699..0000000 --- a/board/esd/meesc/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MEESC BOARD -M: Daniel Gorsulowski daniel.gorsulowski@esd.eu -S: Maintained -F: board/esd/meesc/ -F: include/configs/meesc.h -F: configs/meesc_defconfig -F: configs/meesc_dataflash_defconfig diff --git a/board/esd/meesc/Makefile b/board/esd/meesc/Makefile deleted file mode 100644 index 5d16738..0000000 --- a/board/esd/meesc/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop stelian@popies.net -# Lead Tech Design <www.leadtechdesign.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += meesc.o -obj-$(CONFIG_HAS_DATAFLASH) += partition.o diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c deleted file mode 100644 index c5994e0..0000000 --- a/board/esd/meesc/meesc.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2009-2011 - * Daniel Gorsulowski daniel.gorsulowski@esd.eu - * esd electronic system design gmbh <www.esd.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/clk.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -static int hw_rev = -1; /* hardware revision */ - -int get_hw_rev(void) -{ - if (hw_rev >= 0) - return hw_rev; - - hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19); - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3; - - if (hw_rev == 15) - hw_rev = 0; - - return hw_rev; -} - -#ifdef CONFIG_CMD_NAND -static void meesc_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - - /* Enable CS3 */ - csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa[0]); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | - AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2), - &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(12), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); - - /* Enable NandFlash */ - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif /* CONFIG_CMD_NAND */ - -#ifdef CONFIG_MACB -static void meesc_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - at91_macb_hw_init(); -} -#endif - -/* - * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT - * controller debugging - * The ET1100 is located at physical address 0x70000000 - * Its process memory is located at physical address 0x70001000 - */ -static void meesc_ethercat_hw_init(void) -{ - at91_smc_t *smc1 = (at91_smc_t *) ATMEL_BASE_SMC1; - - /* Configure SMC EBI1_CS0 for EtherCAT */ - writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), - &smc1->cs[0].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) | - AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9), - &smc1->cs[0].pulse); - writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6), - &smc1->cs[0].cycle); - /* - * Configure behavior at external wait signal, byte-select mode, 16 bit - * data bus width, none data float wait states and TDF optimization - */ - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY | - AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) | - AT91_SMC_MODE_TDF, &smc1->cs[0].mode); - - /* Configure RDY/BSY */ - at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */ -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); -#endif - return rc; -} - -int checkboard(void) -{ - char str[32]; - u_char hw_type; /* hardware type */ - - /* read the "Type" register of the ET1100 controller */ - hw_type = readb(CONFIG_ET1100_BASE); - - switch (hw_type) { - case 0x11: - case 0x3F: - /* ET1100 present, arch number of MEESC-Board */ - gd->bd->bi_arch_number = MACH_TYPE_MEESC; - puts("Board: CAN-EtherCAT Gateway"); - break; - case 0xFF: - /* no ET1100 present, arch number of EtherCAN/2-Board */ - gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2; - puts("Board: EtherCAN/2 Gateway"); - /* switch on LED1D */ - at91_set_pio_output(AT91_PIO_PORTB, 12, 1); - break; - default: - /* assume, no ET1100 present, arch number of EtherCAN/2-Board */ - gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2; - printf("ERROR! Read invalid hw_type: %02X\n", hw_type); - puts("Board: EtherCAN/2 Gateway"); - break; - } - if (getenv_f("serial#", str, sizeof(str)) > 0) { - puts(", serial# "); - puts(str); - } - printf("\nHardware-revision: 1.%d\n", get_hw_rev()); - printf("Mach-type: %lu\n", gd->bd->bi_arch_number); - return 0; -} - -#ifdef CONFIG_SERIAL_TAG -void get_board_serial(struct tag_serialnr *serialnr) -{ - char *str; - - char *serial = getenv("serial#"); - if (serial) { - str = strchr(serial, '_'); - if (str && (strlen(str) >= 4)) { - serialnr->high = (*(str + 1) << 8) | *(str + 2); - serialnr->low = simple_strtoul(str + 3, NULL, 16); - } - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} -#endif - -#ifdef CONFIG_REVISION_TAG -u32 get_board_rev(void) -{ - return hw_rev | 0x100; -} -#endif - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - char *str; - char buf[32]; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* - * Normally the processor clock has a divisor of 2. - * In some cases this this needs to be set to 4. - * Check the user has set environment mdiv to 4 to change the divisor. - */ - if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) { - writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) | - AT91SAM9_PMC_MDIV_4, &pmc->mckr); - at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); - serial_setbrg(); - /* Notify the user that the clock is not default */ - printf("Setting master clock to %s MHz\n", - strmhz(buf, get_mck_clk_rate())); - } - - return 0; -} -#endif /* CONFIG_MISC_INIT_R */ - -int board_early_init_f(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* enable all clocks */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE) | (1 << ATMEL_ID_UHP), - &pmc->pcer); - - at91_seriald_hw_init(); - - return 0; -} - -int board_init(void) -{ - /* initialize ET1100 Controller */ - meesc_ethercat_hw_init(); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_CMD_NAND - meesc_nand_hw_init(); -#endif -#ifdef CONFIG_HAS_DATAFLASH - at91_spi0_hw_init(1 << 0); -#endif -#ifdef CONFIG_MACB - meesc_macb_hw_init(); -#endif -#ifdef CONFIG_AT91_CAN - at91_can_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91_uhp_hw_init(); -#endif - return 0; -} diff --git a/board/esd/meesc/partition.c b/board/esd/meesc/partition.c deleted file mode 100644 index b6afafc..0000000 --- a/board/esd/meesc/partition.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson ulf@atmel.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <config.h> -#include <asm/hardware.h> -#include <dataflash.h> - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -}; - -/* define the area offsets */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, -}; diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig deleted file mode 100644 index e4f7cce..0000000 --- a/configs/meesc_dataflash_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_MEESC=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig deleted file mode 100644 index 7d1fe7b..0000000 --- a/configs/meesc_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_MEESC=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/meesc.h b/include/configs/meesc.h deleted file mode 100644 index e5bb873..0000000 --- a/include/configs/meesc.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2009-2011 - * Daniel Gorsulowski daniel.gorsulowski@esd.eu - * esd electronic system design gmbh <www.esd.eu> - * - * Configuation settings for the esd MEESC board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -/* - * Warning: changing CONFIG_SYS_TEXT_BASE requires - * adapting the initial boot program. - * Since the linker has to swallow that define, we must use a pure - * hex number here! - */ -#define CONFIG_SYS_TEXT_BASE 0x20002000 - -/* - * since a number of boards are not being listed in linux - * arch/arm/tools/mach-types any more, the mach-types have to be - * defined here - */ -#define MACH_TYPE_MEESC 2165 -#define MACH_TYPE_ETHERCAN2 2407 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ - -/* Misc CPU related */ -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SERIAL_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_MISC_INIT_R /* Call misc_init_r */ - -#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ -#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ -#define CONFIG_PREBOOT /* enable preboot variable */ - -/* - * Hardware drivers - */ - -/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP - -/* general purpose I/O */ -#define CONFIG_AT91_GPIO - -/* Console output */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB - -/* LED */ -#define CONFIG_AT91_LED - -/* - * SDRAM: 1 bank, min 32, max 128 MB - * Initialized before u-boot gets started. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */ -#define CONFIG_SYS_SDRAM_SIZE 0x02000000 - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000) - -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* DataFlash */ -#ifdef CONFIG_SYS_USE_DATAFLASH -# define CONFIG_ATMEL_DATAFLASH_SPI -# define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -# define AT91_SPI_CLK 15000000 -# define DATAFLASH_TCSS (0x1a << 16) -# define DATAFLASH_TCHS (0x1 << 24) -#endif - -/* NOR flash is not populated, disable it */ -#define CONFIG_SYS_NO_FLASH - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -# define CONFIG_NAND_ATMEL -# define CONFIG_SYS_MAX_NAND_DEVICE 1 -# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */ -# define CONFIG_SYS_NAND_DBW_8 -# define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -# define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_FIT -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_RESET_PHY_R - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* CAN */ -#define CONFIG_AT91_CAN - -/* hw-controller addresses */ -#define CONFIG_ET1100_BASE 0x70000000 - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env in dataflash on CS0 */ -# define CONFIG_ENV_IS_IN_DATAFLASH -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - 0x8400) -# define CONFIG_ENV_OFFSET 0x4200 -# define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - CONFIG_ENV_OFFSET) -# define CONFIG_ENV_SIZE 0x4200 - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ -# define CONFIG_ENV_IS_IN_NAND 1 -# define CONFIG_ENV_OFFSET 0xC0000 -# define CONFIG_ENV_SIZE 0x20000 - -#endif - -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ - 128*1024, 0x1000) - -#endif