[U-Boot] [PATCH][v3] powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
The BSC9132 is a highly integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments.
The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 core technologies with MAPLE-B2P baseband acceleration processing elements to address the need for a high performance, low cost, integrated solution that handles all required processing layers without the need for an external device except for an RF transceiver or, in a Micro base station configuration, a host device that handles the L3/L4 and handover between sectors.
The BSC9132 SoC includes the following function and features: - Power Architecture subsystem including two e500 processors with 512-Kbyte shared L2 cache - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 cache - 32 Kbyte of shared M3 memory - The Multi Accelerator Platform Engine for Pico BaseStation Baseband Processing (MAPLE-B2P) - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - OCNDMA with four bidirectional channels - SysDMA with sixteen bidirectional channels - Interfaces - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD - Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards - Two DUART, two eSPI, and two I2C controllers - Integrated Flash memory controller (IFC) - GPIO - Sixteen 32-bit timers
Signed-off-by: Naveen Burmi NaveenBurmi@freescale.com Signed-off-by: Poonam Aggrwal poonam.aggrwal@freescale.com Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com --- Changes for v2: Incorporated Timur's review comments - Removed SVR_9132_E as it is not required as part of following commit 48f6a5c348453fc3ab33aaa91e5e4198a28678ff Changes for v3: Fix compilation error - Removed 9132_E from arch/powerpc/cpu/mpc8xxx/cpu.c
arch/powerpc/cpu/mpc85xx/Makefile | 2 + arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c | 96 +++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + arch/powerpc/include/asm/config_mpc85xx.h | 15 +++++ arch/powerpc/include/asm/immap_85xx.h | 25 +++++++- arch/powerpc/include/asm/processor.h | 2 + 6 files changed, 140 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 4c2b104..cb1f604 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -85,6 +85,7 @@ COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o +COBJS-$(CONFIG_BSC9132) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o @@ -135,6 +136,7 @@ COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o +COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
COBJS-y += cpu.o COBJS-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c new file mode 100644 index 0000000..300a4db --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c @@ -0,0 +1,96 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Prabhakar Kushwaha prabhakar@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0] = {NONE, NONE, NONE, NONE}, + [1] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [2] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [3] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [4] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [5] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2}, + [12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [22] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [23] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [24] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [25] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [26] = {PCIE1, PCIE2, CPRI2, CPRI1}, + [27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1}, + [32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2}, + [33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1}, + [38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1}, + [43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, + [47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index e8613be..ab454f5 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -86,6 +86,8 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), + CPU_TYPE_ENTRY(BSC9132, 9132, 2), + CPU_TYPE_ENTRY(BSC9232, 9232, 2), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 0b9638b..4b6c172 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -493,6 +493,21 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#elif defined(CONFIG_BSC9132) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" + #elif defined(CONFIG_PPC_T4240) #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 296b549..ab4abc2 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2150,7 +2150,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 #else -#ifdef CONFIG_BSC9131 +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 #else #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003e00 @@ -2164,6 +2164,11 @@ typedef struct ccsr_gur { u32 porbmsr; /* POR boot mode status */ #define MPC85xx_PORBMSR_HA 0x00070000 #define MPC85xx_PORBMSR_HA_SHIFT 16 +#define MPC85XX_PORBMSR_ROMLOC_SHIFT 24 +#define PORBMSR_ROMLOC_SPI 0x6 +#define PORBMSR_ROMLOC_SDHC 0x7 +#define PORBMSR_ROMLOC_NAND_2K 0x9 +#define PORBMSR_ROMLOC_NOR 0xf u32 porimpscr; /* POR I/O impedance status & control */ u32 pordevsr; /* POR I/O device status regsiter */ #if defined(CONFIG_P1017) || defined(CONFIG_P1023) @@ -2188,6 +2193,9 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1010) #define MPC85xx_PORDEVSR_IO_SEL 0x00600000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 +#elif defined(CONFIG_BSC9132) +#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2345,6 +2353,10 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen 0x00000002 #define MPC85xx_PMUXCR_SPI1_CS3_GPO76 0x00000003 #endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 +#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2375,6 +2387,7 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f8000 #define MPC85xx_PMUXCR2_USB 0x00150000 #endif +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000 #define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS 0X80000000 @@ -2418,8 +2431,9 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_ANT3_AGC_GPO53 0x00000004 #define MPC85xx_PMUXCR2_ANT3_DO_TDM 0x00000001 #define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49 0x00000002 +#endif u32 pmuxcr3; - +#if defined(CONFIG_BSC9131) #define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM 0x40000000 #define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51 0x80000000 #define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B 0x10000000 @@ -2434,6 +2448,13 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR3_SPI2_CS3_GPO94 0x00040000 #define MPC85xx_PMUXCR3_ANT2_AGC_RSVD 0x00010000 #define MPC85xx_PMUXCR3_ANT2_GPO89 0x00030000 +#endif +#ifdef CONFIG_BSC9132 +#define MPC85xx_PMUXCR3_USB_SEL_MASK 0x0000ff00 +#define MPC85xx_PMUXCR3_UART2_SEL 0x00005000 +#define MPC85xx_PMUXCR3_UART3_SEL_MASK 0xc0000000 +#define MPC85xx_PMUXCR3_UART3_SEL 0x40000000 +#endif u32 pmuxcr4; #else u8 res6[8]; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 19fe250..8c91f08 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1113,6 +1113,8 @@
#define SVR_9130 0x860001 #define SVR_9131 0x860000 +#define SVR_9132 0x861000 +#define SVR_9232 0x861400
#define SVR_Unknown 0xFFFFFF
participants (1)
-
Prabhakar Kushwaha