Dear Frank van der Jagt,

This question shall go to the ML.

Hi,

I'm trying to get usb support going for eTrayz nas (oxnas810 device). http://www.plxtech.com/products/consumer/oxe810dse This device uses u-Boot 1.1.2 to boot from NOR flash.

I have following questions:

• Why hasn't the source of the oxnas810 drivers been published to the

u-Boot 1.1.2 tree. If I look there there are no drivers for the board in the source tree. Was PLX Tech not obliged to do so under the open source licence ?

The source must be published under the terms of GPL, not commited upstream.

• Where can I get hold of the u-Boot 1.1.2 driver source for this device

and was usb support implemented for this board ?

Ask your hardware vendor.

Thanks and rgds, Frank Hunter intraxit

Best regards, Marek Vasut