RE: [U-Boot-Users] Regarding memory commands

Thanks!
With regards
Aniruddha Herekar
-----Original Message----- From: wd@denx.de [mailto:wd@denx.de] Sent: Thursday, February 09, 2006 2:34 PM To: Herekar, Aniruddha Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] Regarding memory commands
In message 2195AF8E2250C54D8D8A726C8AE84A3331C2C8@dbde01.ent.ti.com you wrote:
Does memory commands mm, mw, mn and tftp work only with RAM memory and
not flash (nor or nand) memory?
The commands have usually no idea what sort of memeory (if any) is
attached to the addresses you pass. [Exception is cp and - epending
on the configuration - tftp which recognize NOR flash areas and use
flash write code then.]
If so are there any other commands other than 'cp' that can be used to
write into flash (nor or nand) memory?
cp is the only regular command to write to NOR flash. It cannot be
used for NAND, though. NAND has it's own interface, the nand command.
Best regards,
Wolfgang Denk
participants (1)
-
Herekar, Aniruddha