[U-Boot] [PATCH v3 00/20] fdt: Move to the new upstream pylibfdt library
Python libfdt bindings have recently been accepted upstream. While the internals have changed a fair bit most of the API remains the same. Still, a few functions are different from how they are used in U-Boot so changes are needed to make this work.
At present in U-Boot there are two libraries for accessing a device tree file:
- FdtNormal which uses U-Boot's own Python bindings - FdtFallback which uses the fdtget command-line utility
The latter is not a great solution: it is fairly slow since the DT is re-read for every access and it cannot provide DT offsets or packing of the DT.
In addition, U-Boot now builds the libfdt module if swig is available, meaning that the fallback module is not used in that case.
Finally, at some point in the future distributions may start packaging the libfdt Python module and it will be available without U-Boot needing to build it itself.
Therefore it seems like a good idea to take this opportunity to drop the fallback module and just require that the Python libfdt bindings be present (at least if need by the build).
The bindings are needed in two situations: - When dtoc is used to convert a device tree into C code. This is enabled by CONFIG_SPL_OF_PLATDATA - When binman is used to produce a firmware image. This is used on all x86 and sunxi boards at present
This series: - Plumbs in building the Python libfdt module to the U-Boot build system - Ensures that the module is always built if needed, print an error if swig is not available (and thus the module cannot be built) - Allows use of a libfdt.py module already installed on the machine - Drops the FdtFallback support - Moves fdt.h and libfdt.h into lib/libfdt to aid with syncing with upstream, building the Python bindings and to keep the code together - Merges Fdt and FdtNormal to simplify the code - Adjusts the Fdt library to work with the new libfdt module - Adds a few more tests to check access to properties in the DT - Adjusts binman and dtoc to work with the new approach
It should be possible to easily sync libfdt's Python bindings with U-Boot in the future, as development there proceeds.
Changes in v3: - More machinations to avoid touching the source directory - Drop changes which are now in any earlier patch
Changes in v2: - Fix building when srcpath is ".."
Simon Glass (20): fdt: Add Python bindings pci: Correct cast for sandbox fdt: Correct cast for sandbox in fdtdec_setup_memory_size() fdt: Use SPDX format for licenses in the libfdt headers fdt: Move header files into lib/libfdt fdt: Allow swig options to be provided by Makefile fdt: Add all source files to the libfdt build fdt: Rename existing python libfdt module fdt: Build the new python libfdt module fdt: Update fdt_test to use 'dt' instead of 'fdt' fdt: dtoc: Add a full set of property tests fdt: Support use of the new python libfdt library fdt: Makefile: Build python libfdt library if needed fdt: Stop building the old python libfdt module fdt: Drop use of the legacy libfdt python module fdt: Drop fdt_fallback library binman: Drop a special case related to fdt_fallback fdt: Merge fdt_normal with its base class binman: Rename fdt variable to dtb fdt: Drop fdt_select.py
Makefile | 16 +- cmd/pci.c | 3 +- include/fdt.h | 112 +- include/libfdt.h | 2138 +------------------------- lib/fdtdec.c | 3 +- lib/libfdt/fdt.h | 67 + lib/libfdt/libfdt.h | 2144 +++++++++++++++++++++++++++ lib/libfdt/libfdt.swig | 113 -- lib/libfdt/pylibfdt/libfdt.i | 389 +++++ lib/libfdt/pylibfdt/setup.py | 123 ++ lib/libfdt/setup.py | 38 - scripts/Makefile.spl | 17 +- tools/Makefile | 54 +- tools/binman/binman.py | 3 + tools/binman/control.py | 12 +- tools/binman/etype/u_boot_dtb_with_ucode.py | 24 +- tools/binman/fdt_test.py | 64 +- tools/binman/func_test.py | 48 +- tools/binman/test/45_prop_test.dts | 23 + tools/dtoc/dtoc.py | 3 +- tools/dtoc/fdt.py | 183 ++- tools/dtoc/fdt_fallback.py | 181 --- tools/dtoc/fdt_normal.py | 225 --- tools/dtoc/fdt_select.py | 36 - 24 files changed, 3060 insertions(+), 2959 deletions(-) create mode 100644 lib/libfdt/fdt.h create mode 100644 lib/libfdt/libfdt.h delete mode 100644 lib/libfdt/libfdt.swig create mode 100644 lib/libfdt/pylibfdt/libfdt.i create mode 100755 lib/libfdt/pylibfdt/setup.py delete mode 100644 lib/libfdt/setup.py create mode 100644 tools/binman/test/45_prop_test.dts delete mode 100644 tools/dtoc/fdt_fallback.py delete mode 100644 tools/dtoc/fdt_normal.py delete mode 100644 tools/dtoc/fdt_select.py
An early version of this is available upstream. Bring it in as a starting point. This is from dtc upstream commit e56f2b0.
Future work will plumb it into dtoc and remove the now-unnecessary local libraries.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
lib/libfdt/pylibfdt/libfdt.i | 389 +++++++++++++++++++++++++++++++++++++++++++ lib/libfdt/pylibfdt/setup.py | 123 ++++++++++++++ 2 files changed, 512 insertions(+) create mode 100644 lib/libfdt/pylibfdt/libfdt.i create mode 100755 lib/libfdt/pylibfdt/setup.py
diff --git a/lib/libfdt/pylibfdt/libfdt.i b/lib/libfdt/pylibfdt/libfdt.i new file mode 100644 index 0000000000..3b11bb0c95 --- /dev/null +++ b/lib/libfdt/pylibfdt/libfdt.i @@ -0,0 +1,389 @@ +/* + * pylibfdt - Flat Device Tree manipulation in Python + * Copyright (C) 2017 Google, Inc. + * Written by Simon Glass sjg@chromium.org + * + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause + */ + +%module libfdt + +%{ +#define SWIG_FILE_WITH_INIT +#include "libfdt.h" +%} + +%pythoncode %{ + +import struct + +# Error codes, corresponding to FDT_ERR_... in libfdt.h +(NOTFOUND, + EXISTS, + NOSPACE, + BADOFFSET, + BADPATH, + BADPHANDLE, + BADSTATE, + TRUNCATED, + BADMAGIC, + BADVERSION, + BADSTRUCTURE, + BADLAYOUT, + INTERNAL, + BADNCELLS, + BADVALUE, + BADOVERLAY, + NOPHANDLES) = QUIET_ALL = range(1, 18) +# QUIET_ALL can be passed as the 'quiet' parameter to avoid exceptions +# altogether. All # functions passed this value will return an error instead +# of raising an exception. + +# Pass this as the 'quiet' parameter to return -ENOTFOUND on NOTFOUND errors, +# instead of raising an exception. +QUIET_NOTFOUND = (NOTFOUND,) + + +class FdtException(Exception): + """An exception caused by an error such as one of the codes above""" + def __init__(self, err): + self.err = err + + def __str__(self): + return 'pylibfdt error %d: %s' % (self.err, fdt_strerror(self.err)) + +def strerror(fdt_err): + """Get the string for an error number + + Args: + fdt_err: Error number (-ve) + + Returns: + String containing the associated error + """ + return fdt_strerror(fdt_err) + +def check_err(val, quiet=()): + """Raise an error if the return value is -ve + + This is used to check for errors returned by libfdt C functions. + + Args: + val: Return value from a libfdt function + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + val if val >= 0 + + Raises + FdtException if val < 0 + """ + if val < 0: + if -val not in quiet: + raise FdtException(val) + return val + +def check_err_null(val, quiet=()): + """Raise an error if the return value is NULL + + This is used to check for a NULL return value from certain libfdt C + functions + + Args: + val: Return value from a libfdt function + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + val if val is a list, None if not + + Raises + FdtException if val indicates an error was reported and the error + is not in @quiet. + """ + # Normally a list is returned which contains the data and its length. + # If we get just an integer error code, it means the function failed. + if not isinstance(val, list): + if -val not in quiet: + raise FdtException(val) + return val + +class Fdt: + """Device tree class, supporting all operations + + The Fdt object is created is created from a device tree binary file, + e.g. with something like: + + fdt = Fdt(open("filename.dtb").read()) + + Operations can then be performed using the methods in this class. Each + method xxx(args...) corresponds to a libfdt function fdt_xxx(fdt, args...). + + All methods raise an FdtException if an error occurs. To avoid this + behaviour a 'quiet' parameter is provided for some functions. This + defaults to empty, but you can pass a list of errors that you expect. + If one of these errors occurs, the function will return an error number + (e.g. -NOTFOUND). + """ + def __init__(self, data): + self._fdt = bytearray(data) + check_err(fdt_check_header(self._fdt)); + + def path_offset(self, path, quiet=()): + """Get the offset for a given path + + Args: + path: Path to the required node, e.g. '/node@3/subnode@1' + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + Node offset + + Raises + FdtException if the path is not valid or not found + """ + return check_err(fdt_path_offset(self._fdt, path), quiet) + + def first_property_offset(self, nodeoffset, quiet=()): + """Get the offset of the first property in a node offset + + Args: + nodeoffset: Offset to the node to check + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + Offset of the first property + + Raises + FdtException if the associated node has no properties, or some + other error occurred + """ + return check_err(fdt_first_property_offset(self._fdt, nodeoffset), + quiet) + + def next_property_offset(self, prop_offset, quiet=()): + """Get the next property in a node + + Args: + prop_offset: Offset of the previous property + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + Offset of the next property + + Raises: + FdtException if the associated node has no more properties, or + some other error occurred + """ + return check_err(fdt_next_property_offset(self._fdt, prop_offset), + quiet) + + def get_name(self, nodeoffset): + """Get the name of a node + + Args: + nodeoffset: Offset of node to check + + Returns: + Node name + + Raises: + FdtException on error (e.g. nodeoffset is invalid) + """ + return check_err_null(fdt_get_name(self._fdt, nodeoffset))[0] + + def get_property_by_offset(self, prop_offset, quiet=()): + """Obtains a property that can be examined + + Args: + prop_offset: Offset of property (e.g. from first_property_offset()) + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + Property object, or None if not found + + Raises: + FdtException on error (e.g. invalid prop_offset or device + tree format) + """ + pdata = check_err_null( + fdt_get_property_by_offset(self._fdt, prop_offset), quiet) + if isinstance(pdata, (int)): + return pdata + return Property(pdata[0], pdata[1]) + + def first_subnode(self, nodeoffset, quiet=()): + """Find the first subnode of a parent node + + Args: + nodeoffset: Node offset of parent node + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + The offset of the first subnode, if any + + Raises: + FdtException if no subnode found or other error occurs + """ + return check_err(fdt_first_subnode(self._fdt, nodeoffset), quiet) + + def next_subnode(self, nodeoffset, quiet=()): + """Find the next subnode + + Args: + nodeoffset: Node offset of previous subnode + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + The offset of the next subnode, if any + + Raises: + FdtException if no more subnode found or other error occurs + """ + return check_err(fdt_next_subnode(self._fdt, nodeoffset), quiet) + + def totalsize(self): + """Return the total size of the device tree + + Returns: + Total tree size in bytes + """ + return check_err(fdt_totalsize(self._fdt)) + + def off_dt_struct(self): + """Return the start of the device tree struct area + + Returns: + Start offset of struct area + """ + return check_err(fdt_off_dt_struct(self._fdt)) + + def pack(self, quiet=()): + """Pack the device tree to remove unused space + + This adjusts the tree in place. + + Args: + quiet: Errors to ignore (empty to raise on all errors) + + Raises: + FdtException if any error occurs + """ + return check_err(fdt_pack(self._fdt), quiet) + + def delprop(self, nodeoffset, prop_name): + """Delete a property from a node + + Args: + nodeoffset: Node offset containing property to delete + prop_name: Name of property to delete + + Raises: + FdtError if the property does not exist, or another error occurs + """ + return check_err(fdt_delprop(self._fdt, nodeoffset, prop_name)) + + def getprop(self, nodeoffset, prop_name, quiet=()): + """Get a property from a node + + Args: + nodeoffset: Node offset containing property to get + prop_name: Name of property to get + quiet: Errors to ignore (empty to raise on all errors) + + Returns: + Value of property as a bytearray, or -ve error number + + Raises: + FdtError if any error occurs (e.g. the property is not found) + """ + pdata = check_err_null(fdt_getprop(self._fdt, nodeoffset, prop_name), + quiet) + if isinstance(pdata, (int)): + return pdata + return bytearray(pdata[0]) + + +class Property: + """Holds a device tree property name and value. + + This holds a copy of a property taken from the device tree. It does not + reference the device tree, so if anything changes in the device tree, + a Property object will remain valid. + + Properties: + name: Property name + value: Proper value as a bytearray + """ + def __init__(self, name, value): + self.name = name + self.value = value +%} + +%rename(fdt_property) fdt_property_func; + +typedef int fdt32_t; + +%include "libfdt/fdt.h" + +%include "typemaps.i" + +/* Most functions don't change the device tree, so use a const void * */ +%typemap(in) (const void *)(const void *fdt) { + if (!PyByteArray_Check($input)) { + SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname" + "', argument " "$argnum"" of type '" "$type""'"); + } + $1 = (void *)PyByteArray_AsString($input); + fdt = $1; + fdt = fdt; /* avoid unused variable warning */ +} + +/* Some functions do change the device tree, so use void * */ +%typemap(in) (void *)(const void *fdt) { + if (!PyByteArray_Check($input)) { + SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname" + "', argument " "$argnum"" of type '" "$type""'"); + } + $1 = PyByteArray_AsString($input); + fdt = $1; + fdt = fdt; /* avoid unused variable warning */ +} + +%typemap(out) (struct fdt_property *) { + PyObject *buff; + + if ($1) { + resultobj = PyString_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); + resultobj = SWIG_Python_AppendOutput(resultobj, buff); + } +} + +%apply int *OUTPUT { int *lenp }; + +/* typemap used for fdt_getprop() */ +%typemap(out) (const void *) { + if (!$1) + $result = Py_None; + else + $result = Py_BuildValue("s#", $1, *arg4); +} + +/* We have both struct fdt_property and a function fdt_property() */ +%warnfilter(302) fdt_property; + +/* These are macros in the header so have to be redefined here */ +int fdt_magic(const void *fdt); +int fdt_totalsize(const void *fdt); +int fdt_off_dt_struct(const void *fdt); +int fdt_off_dt_strings(const void *fdt); +int fdt_off_mem_rsvmap(const void *fdt); +int fdt_version(const void *fdt); +int fdt_last_comp_version(const void *fdt); +int fdt_boot_cpuid_phys(const void *fdt); +int fdt_size_dt_strings(const void *fdt); +int fdt_size_dt_struct(const void *fdt); + +%include <../libfdt/libfdt.h> diff --git a/lib/libfdt/pylibfdt/setup.py b/lib/libfdt/pylibfdt/setup.py new file mode 100755 index 0000000000..38a844cb6d --- /dev/null +++ b/lib/libfdt/pylibfdt/setup.py @@ -0,0 +1,123 @@ +#!/usr/bin/env python + +""" +setup.py file for SWIG libfdt +Copyright (C) 2017 Google, Inc. +Written by Simon Glass sjg@chromium.org + +SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause + +Files to be built into the extension are provided in SOURCES +C flags to use are provided in CPPFLAGS +Object file directory is provided in OBJDIR +Version is provided in VERSION + +If these variables are not given they are parsed from the Makefiles. This +allows this script to be run stand-alone, e.g.: + + ./pylibfdt/setup.py install [--prefix=...] +""" + +from distutils.core import setup, Extension +import os +import re +import sys + +# Decodes a Makefile assignment line into key and value (and plus for +=) +RE_KEY_VALUE = re.compile('(?P<key>\w+) *(?P<plus>[+])?= *(?P<value>.*)$') + + +def ParseMakefile(fname): + """Parse a Makefile to obtain its variables. + + This collects variable assigments of the form: + + VAR = value + VAR += more + + It does not pick out := assignments, as these are not needed here. It does + handle line continuation. + + Returns a dict: + key: Variable name (e.g. 'VAR') + value: Variable value (e.g. 'value more') + """ + makevars = {} + with open(fname) as fd: + prev_text = '' # Continuation text from previous line(s) + for line in fd.read().splitlines(): + if line and line[-1] == '\': # Deal with line continuation + prev_text += line[:-1] + continue + elif prev_text: + line = prev_text + line + prev_text = '' # Continuation is now used up + m = RE_KEY_VALUE.match(line) + if m: + value = m.group('value') or '' + key = m.group('key') + + # Appending to a variable inserts a space beforehand + if 'plus' in m.groupdict() and key in makevars: + makevars[key] += ' ' + value + else: + makevars[key] = value + return makevars + +def GetEnvFromMakefiles(): + """Scan the Makefiles to obtain the settings we need. + + This assumes that this script is being run from the top-level directory, + not the pylibfdt directory. + + Returns: + Tuple with: + List of swig options + Version string + List of files to build + List of extra C preprocessor flags needed + Object directory to use (always '') + """ + basedir = os.path.dirname(os.path.dirname(os.path.abspath(sys.argv[0]))) + swig_opts = ['-I%s' % basedir] + makevars = ParseMakefile(os.path.join(basedir, 'Makefile')) + version = '%s.%s.%s' % (makevars['VERSION'], makevars['PATCHLEVEL'], + makevars['SUBLEVEL']) + makevars = ParseMakefile(os.path.join(basedir, 'libfdt', 'Makefile.libfdt')) + files = makevars['LIBFDT_SRCS'].split() + files = [os.path.join(basedir, 'libfdt', fname) for fname in files] + files.append('pylibfdt/libfdt.i') + cflags = ['-I%s' % basedir, '-I%s/libfdt' % basedir] + objdir = '' + return swig_opts, version, files, cflags, objdir + + +progname = sys.argv[0] +files = os.environ.get('SOURCES', '').split() +cflags = os.environ.get('CPPFLAGS', '').split() +objdir = os.environ.get('OBJDIR') +version = os.environ.get('VERSION') +swig_opts = [] + +# If we were called directly rather than through our Makefile (which is often +# the case with Python module installation), read the settings from the +# Makefile. +if not all((version, files, cflags, objdir)): + swig_opts, version, files, cflags, objdir = GetEnvFromMakefiles() + +libfdt_module = Extension( + '_libfdt', + sources = files, + extra_compile_args = cflags, + swig_opts = swig_opts, +) + +setup( + name='libfdt', + version= version, + author='Simon Glass sjg@chromium.org', + description='Python binding for libfdt', + ext_modules=[libfdt_module], + package_dir={'': objdir}, + py_modules=['pylibfdt/libfdt'], +)
This gives a warning with some native compilers:
cmd/pci.c:152:11: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘u64 {aka long unsigned int}’ [-Wformat=]
Fix it with a cast.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
cmd/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/cmd/pci.c b/cmd/pci.c index 41b4fffcf9..fe27b4f761 100644 --- a/cmd/pci.c +++ b/cmd/pci.c @@ -150,7 +150,8 @@ int pci_bar_show(struct udevice *dev) if ((!is_64 && size_low) || (is_64 && size)) { size = ~size + 1; printf(" %d %#016llx %#016llx %d %s %s\n", - bar_id, base, size, is_64 ? 64 : 32, + bar_id, (unsigned long long)base, + (unsigned long long)size, is_64 ? 64 : 32, is_io ? "I/O" : "MEM", prefetchable ? "Prefetchable" : ""); }
This gives a warning with some native compilers:
lib/fdtdec.c:1203:8: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
Fix it with a cast.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
lib/fdtdec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c index c072e54cff..942244f9a3 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1200,7 +1200,8 @@ int fdtdec_setup_memory_size(void) }
gd->ram_size = (phys_size_t)(res.end - res.start + 1); - debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size); + debug("%s: Initial DRAM size %llx\n", __func__, + (unsigned long long)gd->ram_size);
return 0; }
These should follow the UBoot standard. Update them.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
include/fdt.h | 46 +--------------------------------------------- include/libfdt.h | 46 +--------------------------------------------- 2 files changed, 2 insertions(+), 90 deletions(-)
diff --git a/include/fdt.h b/include/fdt.h index 526aedb515..3134d78332 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -5,51 +5,7 @@ * Copyright (C) 2006 David Gibson, IBM Corporation. * Copyright 2012 Kim Phillips, Freescale Semiconductor. * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */
#ifndef __ASSEMBLY__ diff --git a/include/libfdt.h b/include/libfdt.h index e2bc2e00c1..6d33065e80 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -4,51 +4,7 @@ * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */
#include <libfdt_env.h>
These header files are actually part of libfdt. Move them there to make it easier to build pylibfdt and easier to merge changes from upstream.
Update the license header to use SPDX at the same time.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
include/fdt.h | 68 +- include/libfdt.h | 2094 +------------------------------------------------ lib/libfdt/fdt.h | 67 ++ lib/libfdt/libfdt.h | 2144 +++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2213 insertions(+), 2160 deletions(-) create mode 100644 lib/libfdt/fdt.h create mode 100644 lib/libfdt/libfdt.h
diff --git a/include/fdt.h b/include/fdt.h index 3134d78332..7ead62e777 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -1,67 +1 @@ -#ifndef _FDT_H -#define _FDT_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * Copyright 2012 Kim Phillips, Freescale Semiconductor. - * - * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause - */ - -#ifndef __ASSEMBLY__ - -struct fdt_header { - fdt32_t magic; /* magic word FDT_MAGIC */ - fdt32_t totalsize; /* total size of DT block */ - fdt32_t off_dt_struct; /* offset to structure */ - fdt32_t off_dt_strings; /* offset to strings */ - fdt32_t off_mem_rsvmap; /* offset to memory reserve map */ - fdt32_t version; /* format version */ - fdt32_t last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - fdt32_t boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - fdt32_t size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - fdt32_t size_dt_struct; /* size of the structure block */ -}; - -struct fdt_reserve_entry { - fdt64_t address; - fdt64_t size; -}; - -struct fdt_node_header { - fdt32_t tag; - char name[0]; -}; - -struct fdt_property { - fdt32_t tag; - fdt32_t len; - fdt32_t nameoff; - char data[0]; -}; - -#endif /* !__ASSEMBLY */ - -#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ -#define FDT_TAGSIZE sizeof(fdt32_t) - -#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ -#define FDT_END_NODE 0x2 /* End node */ -#define FDT_PROP 0x3 /* Property: name off, - size, content */ -#define FDT_NOP 0x4 /* nop */ -#define FDT_END 0x9 - -#define FDT_V1_SIZE (7*sizeof(fdt32_t)) -#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(fdt32_t)) -#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(fdt32_t)) -#define FDT_V16_SIZE FDT_V3_SIZE -#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) - -#endif /* _FDT_H */ +#include <../lib/libfdt/fdt.h> diff --git a/include/libfdt.h b/include/libfdt.h index 6d33065e80..10296a21ad 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -1,2093 +1 @@ -#ifndef _LIBFDT_H -#define _LIBFDT_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause - */ - -#include <libfdt_env.h> -#include <fdt.h> - -#define FDT_FIRST_SUPPORTED_VERSION 0x10 -#define FDT_LAST_SUPPORTED_VERSION 0x11 - -/* Error codes: informative error codes */ -#define FDT_ERR_NOTFOUND 1 - /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ -#define FDT_ERR_EXISTS 2 - /* FDT_ERR_EXISTS: Attempted to create a node or property which - * already exists */ -#define FDT_ERR_NOSPACE 3 - /* FDT_ERR_NOSPACE: Operation needed to expand the device - * tree, but its buffer did not have sufficient space to - * contain the expanded tree. Use fdt_open_into() to move the - * device tree to a buffer with more space. */ - -/* Error codes: codes for bad parameters */ -#define FDT_ERR_BADOFFSET 4 - /* FDT_ERR_BADOFFSET: Function was passed a structure block - * offset which is out-of-bounds, or which points to an - * unsuitable part of the structure for the operation. */ -#define FDT_ERR_BADPATH 5 - /* FDT_ERR_BADPATH: Function was passed a badly formatted path - * (e.g. missing a leading / for a function which requires an - * absolute path) */ -#define FDT_ERR_BADPHANDLE 6 - /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. - * This can be caused either by an invalid phandle property - * length, or the phandle value was either 0 or -1, which are - * not permitted. */ -#define FDT_ERR_BADSTATE 7 - /* FDT_ERR_BADSTATE: Function was passed an incomplete device - * tree created by the sequential-write functions, which is - * not sufficiently complete for the requested operation. */ - -/* Error codes: codes for bad device tree blobs */ -#define FDT_ERR_TRUNCATED 8 - /* FDT_ERR_TRUNCATED: Structure block of the given device tree - * ends without an FDT_END tag. */ -#define FDT_ERR_BADMAGIC 9 - /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a - * device tree at all - it is missing the flattened device - * tree magic number. */ -#define FDT_ERR_BADVERSION 10 - /* FDT_ERR_BADVERSION: Given device tree has a version which - * can't be handled by the requested operation. For - * read-write functions, this may mean that fdt_open_into() is - * required to convert the tree to the expected version. */ -#define FDT_ERR_BADSTRUCTURE 11 - /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt - * structure block or other serious error (e.g. misnested - * nodes, or subnodes preceding properties). */ -#define FDT_ERR_BADLAYOUT 12 - /* FDT_ERR_BADLAYOUT: For read-write functions, the given - * device tree has it's sub-blocks in an order that the - * function can't handle (memory reserve map, then structure, - * then strings). Use fdt_open_into() to reorganize the tree - * into a form suitable for the read-write operations. */ - -/* "Can't happen" error indicating a bug in libfdt */ -#define FDT_ERR_INTERNAL 13 - /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. - * Should never be returned, if it is, it indicates a bug in - * libfdt itself. */ - -/* Errors in device tree content */ -#define FDT_ERR_BADNCELLS 14 - /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells - * or similar property with a bad format or value */ - -#define FDT_ERR_BADVALUE 15 - /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected - * value. For example: a property expected to contain a string list - * is not NUL-terminated within the length of its value. */ - -#define FDT_ERR_BADOVERLAY 16 - /* FDT_ERR_BADOVERLAY: The device tree overlay, while - * correctly structured, cannot be applied due to some - * unexpected or missing value, property or node. */ - -#define FDT_ERR_NOPHANDLES 17 - /* FDT_ERR_NOPHANDLES: The device tree doesn't have any - * phandle available anymore without causing an overflow */ - -#define FDT_ERR_TOODEEP 18 - /* FDT_ERR_TOODEEP: The depth of a node has exceeded the internal - * libfdt limit. This can happen if you have more than - * FDT_MAX_DEPTH nested nodes. */ - -#define FDT_ERR_MAX 18 - -/**********************************************************************/ -/* Low-level functions (you probably don't need these) */ -/**********************************************************************/ - -const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); -static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) -{ - return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); - -/**********************************************************************/ -/* Traversal functions */ -/**********************************************************************/ - -int fdt_next_node(const void *fdt, int offset, int *depth); - -/** - * fdt_first_subnode() - get offset of first direct subnode - * - * @fdt: FDT blob - * @offset: Offset of node to check - * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none - */ -int fdt_first_subnode(const void *fdt, int offset); - -/** - * fdt_next_subnode() - get offset of next direct subnode - * - * After first calling fdt_first_subnode(), call this function repeatedly to - * get direct subnodes of a parent node. - * - * @fdt: FDT blob - * @offset: Offset of previous subnode - * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more - * subnodes - */ -int fdt_next_subnode(const void *fdt, int offset); - -/** - * fdt_for_each_subnode - iterate over all subnodes of a parent - * - * @node: child node (int, lvalue) - * @fdt: FDT blob (const void *) - * @parent: parent node (int) - * - * This is actually a wrapper around a for loop and would be used like so: - * - * fdt_for_each_subnode(node, fdt, parent) { - * Use node - * ... - * } - * - * if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) { - * Error handling - * } - * - * Note that this is implemented as a macro and @node is used as - * iterator in the loop. The parent variable be constant or even a - * literal. - * - */ -#define fdt_for_each_subnode(node, fdt, parent) \ - for (node = fdt_first_subnode(fdt, parent); \ - node >= 0; \ - node = fdt_next_subnode(fdt, node)) - -/**********************************************************************/ -/* General functions */ -/**********************************************************************/ - -#define fdt_get_header(fdt, field) \ - (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) -#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) -#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) -#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) -#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) -#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) -#define fdt_version(fdt) (fdt_get_header(fdt, version)) -#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) -#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) -#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) -#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) - -#define __fdt_set_hdr(name) \ - static inline void fdt_set_##name(void *fdt, uint32_t val) \ - { \ - struct fdt_header *fdth = (struct fdt_header *)fdt; \ - fdth->name = cpu_to_fdt32(val); \ - } -__fdt_set_hdr(magic); -__fdt_set_hdr(totalsize); -__fdt_set_hdr(off_dt_struct); -__fdt_set_hdr(off_dt_strings); -__fdt_set_hdr(off_mem_rsvmap); -__fdt_set_hdr(version); -__fdt_set_hdr(last_comp_version); -__fdt_set_hdr(boot_cpuid_phys); -__fdt_set_hdr(size_dt_strings); -__fdt_set_hdr(size_dt_struct); -#undef __fdt_set_hdr - -/** - * fdt_check_header - sanity check a device tree or possible device tree - * @fdt: pointer to data which might be a flattened device tree - * - * fdt_check_header() checks that the given buffer contains what - * appears to be a flattened device tree with sane information in its - * header. - * - * returns: - * 0, if the buffer appears to contain a valid device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings, as above - */ -int fdt_check_header(const void *fdt); - -/** - * fdt_move - move a device tree around in memory - * @fdt: pointer to the device tree to move - * @buf: pointer to memory where the device is to be moved - * @bufsize: size of the memory space at buf - * - * fdt_move() relocates, if possible, the device tree blob located at - * fdt to the buffer at buf of size bufsize. The buffer may overlap - * with the existing device tree blob at fdt. Therefore, - * fdt_move(fdt, fdt, fdt_totalsize(fdt)) - * should always succeed. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_move(const void *fdt, void *buf, int bufsize); - -/**********************************************************************/ -/* Read-only functions */ -/**********************************************************************/ - -/** - * fdt_string - retrieve a string from the strings block of a device tree - * @fdt: pointer to the device tree blob - * @stroffset: offset of the string within the strings block (native endian) - * - * fdt_string() retrieves a pointer to a single string from the - * strings block of the device tree blob at fdt. - * - * returns: - * a pointer to the string, on success - * NULL, if stroffset is out of bounds - */ -const char *fdt_string(const void *fdt, int stroffset); - -/** - * fdt_get_max_phandle - retrieves the highest phandle in a tree - * @fdt: pointer to the device tree blob - * - * fdt_get_max_phandle retrieves the highest phandle in the given - * device tree. This will ignore badly formatted phandles, or phandles - * with a value of 0 or -1. - * - * returns: - * the highest phandle on success - * 0, if no phandle was found in the device tree - * -1, if an error occurred - */ -uint32_t fdt_get_max_phandle(const void *fdt); - -/** - * fdt_num_mem_rsv - retrieve the number of memory reserve map entries - * @fdt: pointer to the device tree blob - * - * Returns the number of entries in the device tree blob's memory - * reservation map. This does not include the terminating 0,0 entry - * or any other (0,0) entries reserved for expansion. - * - * returns: - * the number of entries - */ -int fdt_num_mem_rsv(const void *fdt); - -/** - * fdt_get_mem_rsv - retrieve one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: pointers to 64-bit variables - * - * On success, *address and *size will contain the address and size of - * the n-th reserve map entry from the device tree blob, in - * native-endian format. - * - * returns: - * 0, on success - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); - -/** - * fdt_subnode_offset_namelen - find a subnode based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_subnode_offset(), but only examine the first - * namelen characters of name for matching the subnode name. This is - * useful for finding subnodes based on a portion of a larger string, - * such as a full path. - */ -int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, - const char *name, int namelen); -/** - * fdt_subnode_offset - find a subnode of a given node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_subnode_offset() finds a subnode of the node at structure block - * offset parentoffset with the given name. name may include a unit - * address, in which case fdt_subnode_offset() will find the subnode - * with that unit address, or the unit address may be omitted, in - * which case fdt_subnode_offset() will find an arbitrary subnode - * whose name excluding unit address matches the given name. - * - * returns: - * structure block offset of the requested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE - * tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); - -/** - * fdt_path_offset_namelen - find a tree node by its full path - * @fdt: pointer to the device tree blob - * @path: full path of the node to locate - * @namelen: number of characters of path to consider - * - * Identical to fdt_path_offset(), but only consider the first namelen - * characters of path as the path name. - */ -int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); - -/** - * fdt_path_offset - find a tree node by its full path - * @fdt: pointer to the device tree blob - * @path: full path of the node to locate - * - * fdt_path_offset() finds a node of a given path in the device tree. - * Each path component may omit the unit address portion, but the - * results of this are undefined if any such path component is - * ambiguous (that is if there are multiple nodes at the relevant - * level matching the given component, differentiated only by unit - * address). - * - * returns: - * structure block offset of the node with the requested path (>=0), on - * success - * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid - * -FDT_ERR_NOTFOUND, if the requested node does not exist - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_path_offset(const void *fdt, const char *path); - -/** - * fdt_get_name - retrieve the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the starting node - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_name() retrieves the name (including unit address) of the - * device tree node at structure block offset nodeoffset. If lenp is - * non-NULL, the length of this name is also returned, in the integer - * pointed to by lenp. - * - * returns: - * pointer to the node's name, on success - * If lenp is non-NULL, *lenp contains the length of that name - * (>=0) - * NULL, on error - * if lenp is non-NULL *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE - * tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); - -/** - * fdt_first_property_offset - find the offset of a node's first property - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of a node - * - * fdt_first_property_offset() finds the first property of the node at - * the given structure block offset. - * - * returns: - * structure block offset of the property (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested node has no properties - * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_first_property_offset(const void *fdt, int nodeoffset); - -/** - * fdt_next_property_offset - step through a node's properties - * @fdt: pointer to the device tree blob - * @offset: structure block offset of a property - * - * fdt_next_property_offset() finds the property immediately after the - * one at the given structure block offset. This will be a property - * of the same node as the given property. - * - * returns: - * structure block offset of the next property (>=0), on success - * -FDT_ERR_NOTFOUND, if the given property is the last in its node - * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_next_property_offset(const void *fdt, int offset); - -/** - * fdt_for_each_property_offset - iterate over all properties of a node - * - * @property_offset: property offset (int, lvalue) - * @fdt: FDT blob (const void *) - * @node: node offset (int) - * - * This is actually a wrapper around a for loop and would be used like so: - * - * fdt_for_each_property_offset(property, fdt, node) { - * Use property - * ... - * } - * - * if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) { - * Error handling - * } - * - * Note that this is implemented as a macro and property is used as - * iterator in the loop. The node variable can be constant or even a - * literal. - */ -#define fdt_for_each_property_offset(property, fdt, node) \ - for (property = fdt_first_property_offset(fdt, node); \ - property >= 0; \ - property = fdt_next_property_offset(fdt, property)) - -/** - * fdt_get_property_by_offset - retrieve the property at a given offset - * @fdt: pointer to the device tree blob - * @offset: offset of the property to retrieve - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_property_by_offset() retrieves a pointer to the - * fdt_property structure within the device tree blob at the given - * offset. If lenp is non-NULL, the length of the property value is - * also returned, in the integer pointed to by lenp. - * - * returns: - * pointer to the structure representing the property - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const struct fdt_property *fdt_get_property_by_offset(const void *fdt, - int offset, - int *lenp); - -/** - * fdt_get_property_namelen - find a property based on substring - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @namelen: number of characters of name to consider - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * Identical to fdt_get_property(), but only examine the first namelen - * characters of name for matching the property name. - */ -const struct fdt_property *fdt_get_property_namelen(const void *fdt, - int nodeoffset, - const char *name, - int namelen, int *lenp); - -/** - * fdt_get_property - find a given property in a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_property() retrieves a pointer to the fdt_property - * structure within the device tree blob corresponding to the property - * named 'name' of the node at offset nodeoffset. If lenp is - * non-NULL, the length of the property value is also returned, in the - * integer pointed to by lenp. - * - * returns: - * pointer to the structure representing the property - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE - * tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, - const char *name, - int *lenp) -{ - return (struct fdt_property *)(uintptr_t) - fdt_get_property(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_getprop_by_offset - retrieve the value of a property at a given offset - * @fdt: pointer to the device tree blob - * @ffset: offset of the property to read - * @namep: pointer to a string variable (will be overwritten) or NULL - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_getprop_by_offset() retrieves a pointer to the value of the - * property at structure block offset 'offset' (this will be a pointer - * to within the device blob itself, not a copy of the value). If - * lenp is non-NULL, the length of the property value is also - * returned, in the integer pointed to by lenp. If namep is non-NULL, - * the property's namne will also be returned in the char * pointed to - * by namep (this will be a pointer to within the device tree's string - * block, not a new copy of the name). - * - * returns: - * pointer to the property's value - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * if namep is non-NULL *namep contiains a pointer to the property - * name. - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const void *fdt_getprop_by_offset(const void *fdt, int offset, - const char **namep, int *lenp); - -/** - * fdt_getprop_namelen - get property value based on substring - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @namelen: number of characters of name to consider - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * Identical to fdt_getprop(), but only examine the first namelen - * characters of name for matching the property name. - */ -const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, - const char *name, int namelen, int *lenp); -static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, - const char *name, int namelen, - int *lenp) -{ - return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, - namelen, lenp); -} - -/** - * fdt_getprop - retrieve the value of a given property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_getprop() retrieves a pointer to the value of the property - * named 'name' of the node at offset nodeoffset (this will be a - * pointer to within the device blob itself, not a copy of the value). - * If lenp is non-NULL, the length of the property value is also - * returned, in the integer pointed to by lenp. - * - * returns: - * pointer to the property's value - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE - * tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline void *fdt_getprop_w(void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_get_phandle - retrieve the phandle of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the node - * - * fdt_get_phandle() retrieves the phandle of the device tree node at - * structure block offset nodeoffset. - * - * returns: - * the phandle of the node at nodeoffset, on success (!= 0, != -1) - * 0, if the node has no phandle, or another error occurs - */ -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); - -/** - * fdt_get_alias_namelen - get alias based on substring - * @fdt: pointer to the device tree blob - * @name: name of the alias th look up - * @namelen: number of characters of name to consider - * - * Identical to fdt_get_alias(), but only examine the first namelen - * characters of name for matching the alias name. - */ -const char *fdt_get_alias_namelen(const void *fdt, - const char *name, int namelen); - -/** - * fdt_get_alias - retrieve the path referenced by a given alias - * @fdt: pointer to the device tree blob - * @name: name of the alias th look up - * - * fdt_get_alias() retrieves the value of a given alias. That is, the - * value of the property named 'name' in the node /aliases. - * - * returns: - * a pointer to the expansion of the alias named 'name', if it exists - * NULL, if the given alias or the /aliases node does not exist - */ -const char *fdt_get_alias(const void *fdt, const char *name); - -/** - * fdt_get_path - determine the full path of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose path to find - * @buf: character buffer to contain the returned path (will be overwritten) - * @buflen: size of the character buffer at buf - * - * fdt_get_path() computes the full path of the node at offset - * nodeoffset, and records that path in the buffer at buf. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * 0, on success - * buf contains the absolute path of the node at - * nodeoffset, as a NUL-terminated string. - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) - * characters and will not fit in the given buffer. - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); - -/** - * fdt_supernode_atdepth_offset - find a specific ancestor of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * @supernodedepth: depth of the ancestor to find - * @nodedepth: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_supernode_atdepth_offset() finds an ancestor of the given node - * at a specific depth from the root (where the root itself has depth - * 0, its immediate subnodes depth 1 and so forth). So - * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); - * will always return 0, the offset of the root node. If the node at - * nodeoffset has depth D, then: - * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); - * will return nodeoffset itself. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * structure block offset of the node at node offset's ancestor - * of depth supernodedepth (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of - * nodeoffset - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth); - -/** - * fdt_node_depth - find the depth of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_node_depth() finds the depth of a given node. The root node - * has depth 0, its immediate subnodes depth 1 and so forth. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * depth of the node at nodeoffset (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_depth(const void *fdt, int nodeoffset); - -/** - * fdt_parent_offset - find the parent of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_parent_offset() locates the parent node of a given node (that - * is, it finds the offset of the node which contains the node at - * nodeoffset as a subnode). - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset, *twice*. - * - * returns: - * structure block offset of the parent of the node at nodeoffset - * (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_parent_offset(const void *fdt, int nodeoffset); - -/** - * fdt_node_offset_by_prop_value - find nodes with a given property value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @propname: property name to check - * @propval: property value to search for - * @proplen: length of the value in propval - * - * fdt_node_offset_by_prop_value() returns the offset of the first - * node after startoffset, which has a property named propname whose - * value is of length proplen and has value equal to propval; or if - * startoffset is -1, the very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, - * propval, proplen); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, - * propval, proplen); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen); - -/** - * fdt_node_offset_by_phandle - find the node with a given phandle - * @fdt: pointer to the device tree blob - * @phandle: phandle value - * - * fdt_node_offset_by_phandle() returns the offset of the node - * which has the given phandle value. If there is more than one node - * in the tree with the given phandle (an invalid tree), results are - * undefined. - * - * returns: - * structure block offset of the located node (>= 0), on success - * -FDT_ERR_NOTFOUND, no node with that phandle exists - * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); - -/** - * fdt_node_check_compatible: check a node's compatible property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @compatible: string to match against - * - * - * fdt_node_check_compatible() returns 0 if the given node contains a - * 'compatible' property with the given string as one of its elements, - * it returns non-zero otherwise, or on error. - * - * returns: - * 0, if the node has a 'compatible' property listing the given string - * 1, if the node has a 'compatible' property, but it does not list - * the given string - * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property - * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible); - -/** - * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @compatible: 'compatible' string to match against - * - * fdt_node_offset_by_compatible() returns the offset of the first - * node after startoffset, which has a 'compatible' property which - * lists the given compatible string; or if startoffset is -1, the - * very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible); - -/** - * fdt_stringlist_contains - check a string list property for a string - * @strlist: Property containing a list of strings to check - * @listlen: Length of property - * @str: String to search for - * - * This is a utility function provided for convenience. The list contains - * one or more strings, each terminated by \0, as is found in a device tree - * "compatible" property. - * - * @return: 1 if the string is found in the list, 0 not found, or invalid list - */ -int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); - -/** - * fdt_stringlist_count - count the number of strings in a string list - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @property: name of the property containing the string list - * @return: - * the number of strings in the given property - * -FDT_ERR_BADVALUE if the property value is not NUL-terminated - * -FDT_ERR_NOTFOUND if the property does not exist - */ -int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); - -/** - * fdt_stringlist_search - find a string in a string list and return its index - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @property: name of the property containing the string list - * @string: string to look up in the string list - * - * Note that it is possible for this function to succeed on property values - * that are not NUL-terminated. That's because the function will stop after - * finding the first occurrence of @string. This can for example happen with - * small-valued cell properties, such as #address-cells, when searching for - * the empty string. - * - * @return: - * the index of the string in the list of strings - * -FDT_ERR_BADVALUE if the property value is not NUL-terminated - * -FDT_ERR_NOTFOUND if the property does not exist or does not contain - * the given string - */ -int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, - const char *string); - -/** - * fdt_stringlist_get() - obtain the string at a given index in a string list - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @property: name of the property containing the string list - * @index: index of the string to return - * @lenp: return location for the string length or an error code on failure - * - * Note that this will successfully extract strings from properties with - * non-NUL-terminated values. For example on small-valued cell properties - * this function will return the empty string. - * - * If non-NULL, the length of the string (on success) or a negative error-code - * (on failure) will be stored in the integer pointer to by lenp. - * - * @return: - * A pointer to the string at the given index in the string list or NULL on - * failure. On success the length of the string will be stored in the memory - * location pointed to by the lenp parameter, if non-NULL. On failure one of - * the following negative error codes will be returned in the lenp parameter - * (if non-NULL): - * -FDT_ERR_BADVALUE if the property value is not NUL-terminated - * -FDT_ERR_NOTFOUND if the property does not exist - */ -const char *fdt_stringlist_get(const void *fdt, int nodeoffset, - const char *property, int index, - int *lenp); - -/**********************************************************************/ -/* Read-only functions (addressing related) */ -/**********************************************************************/ - -/** - * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells - * - * This is the maximum value for #address-cells, #size-cells and - * similar properties that will be processed by libfdt. IEE1275 - * requires that OF implementations handle values up to 4. - * Implementations may support larger values, but in practice higher - * values aren't used. - */ -#define FDT_MAX_NCELLS 4 - -/** - * fdt_address_cells - retrieve address size for a bus represented in the tree - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to find the address size for - * - * When the node has a valid #address-cells property, returns its value. - * - * returns: - * 0 <= n < FDT_MAX_NCELLS, on success - * 2, if the node has no #address-cells property - * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid - * #address-cells property - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_address_cells(const void *fdt, int nodeoffset); - -/** - * fdt_size_cells - retrieve address range size for a bus represented in the - * tree - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to find the address range size for - * - * When the node has a valid #size-cells property, returns its value. - * - * returns: - * 0 <= n < FDT_MAX_NCELLS, on success - * 2, if the node has no #address-cells property - * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid - * #size-cells property - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_size_cells(const void *fdt, int nodeoffset); - - -/**********************************************************************/ -/* Write-in-place functions */ -/**********************************************************************/ - -/** - * fdt_setprop_inplace_namelen_partial - change a property's value, - * but not its size - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @namelen: number of characters of name to consider - * @idx: index of the property to change in the array - * @val: pointer to data to replace the property value with - * @len: length of the property value - * - * Identical to fdt_setprop_inplace(), but modifies the given property - * starting from the given index, and using only the first characters - * of the name. It is useful when you want to manipulate only one value of - * an array and you have a string that doesn't end with \0. - */ -int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, - const char *name, int namelen, - uint32_t idx, const void *val, - int len); - -/** - * fdt_setprop_inplace - change a property's value, but not its size - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to replace the property value with - * @len: length of the property value - * - * fdt_setprop_inplace() replaces the value of a given property with - * the data in val, of length len. This function cannot change the - * size of a property, and so will only work if len is equal to the - * current length of the property. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if len is not equal to the property's current length - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value to replace the property with - * - * fdt_setprop_inplace_u32() replaces the value of a given property - * with the 32-bit integer value in val, converting val to big-endian - * if necessary. This function cannot change the size of a property, - * and so will only work if the property already exists and has length - * 4. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - fdt32_t tmp = cpu_to_fdt32(val); - return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); -} - -/** - * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 64-bit integer value to replace the property with - * - * fdt_setprop_inplace_u64() replaces the value of a given property - * with the 64-bit integer value in val, converting val to big-endian - * if necessary. This function cannot change the size of a property, - * and so will only work if the property already exists and has length - * 8. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, - const char *name, uint64_t val) -{ - fdt64_t tmp = cpu_to_fdt64(val); - return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); -} - -/** - * fdt_setprop_inplace_cell - change the value of a single-cell property - * - * This is an alternative name for fdt_setprop_inplace_u32() - */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); -} - -/** - * fdt_nop_property - replace a property with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_nop_property() will replace a given property's representation - * in the blob with FDT_NOP tags, effectively removing it from the - * tree. - * - * This function will alter only the bytes in the blob which contain - * the property, and will not alter or move any other part of the - * tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_property(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_nop_node - replace a node (subtree) with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_nop_node() will replace a given node's representation in the - * blob, including all its subnodes, if any, with FDT_NOP tags, - * effectively removing it from the tree. - * - * This function will alter only the bytes in the blob which contain - * the node and its properties and subnodes, and will not alter or - * move any other part of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Sequential write functions */ -/**********************************************************************/ - -int fdt_create(void *buf, int bufsize); -int fdt_resize(void *fdt, void *buf, int bufsize); -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); -int fdt_finish_reservemap(void *fdt); -int fdt_begin_node(void *fdt, const char *name); -int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) -{ - fdt32_t tmp = cpu_to_fdt32(val); - return fdt_property(fdt, name, &tmp, sizeof(tmp)); -} -static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) -{ - fdt64_t tmp = cpu_to_fdt64(val); - return fdt_property(fdt, name, &tmp, sizeof(tmp)); -} -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) -{ - return fdt_property_u32(fdt, name, val); -} - -/** - * fdt_property_placeholder - add a new property and return a ptr to its value - * - * @fdt: pointer to the device tree blob - * @name: name of property to add - * @len: length of property value in bytes - * @valp: returns a pointer to where where the value should be placed - * - * returns: - * 0, on success - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_NOSPACE, standard meanings - */ -int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); - -#define fdt_property_string(fdt, name, str) \ - fdt_property(fdt, name, str, strlen(str)+1) -int fdt_end_node(void *fdt); -int fdt_finish(void *fdt); - -/**********************************************************************/ -/* Read-write functions */ -/**********************************************************************/ - -int fdt_create_empty_tree(void *buf, int bufsize); -int fdt_open_into(const void *fdt, void *buf, int bufsize); -int fdt_pack(void *fdt); - -/** - * fdt_add_mem_rsv - add one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: 64-bit values (native endian) - * - * Adds a reserve map entry to the given blob reserving a region at - * address address of length size. - * - * This function will insert data into the reserve map and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new reservation entry - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); - -/** - * fdt_del_mem_rsv - remove a memory reserve map entry - * @fdt: pointer to the device tree blob - * @n: entry to remove - * - * fdt_del_mem_rsv() removes the n-th memory reserve map entry from - * the blob. - * - * This function will delete data from the reservation table and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there - * are less than n+1 reserve map entries) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_mem_rsv(void *fdt, int n); - -/** - * fdt_set_name - change the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of a node - * @name: name to give the node - * - * fdt_set_name() replaces the name (including unit address, if any) - * of the given node with the given string. NOTE: this function can't - * efficiently check if the new name is unique amongst the given - * node's siblings; results are undefined if this function is invoked - * with a name equal to one of the given node's siblings. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob - * to contain the new name - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_set_name(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_setprop - create or change a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to set the property value to - * @len: length of the property value - * - * fdt_setprop() sets the value of the named property in the given - * node to the given value and length, creating the property if it - * does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_u32 - set a property to a 32-bit integer - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value for the property (native endian) - * - * fdt_setprop_u32() sets the value of the named property in the given - * node to the given 32-bit integer value (converting to big-endian if - * necessary), or creates a new property with that value if it does - * not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, - uint32_t val) -{ - fdt32_t tmp = cpu_to_fdt32(val); - return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); -} - -/** - * fdt_setprop_u64 - set a property to a 64-bit integer - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 64-bit integer value for the property (native endian) - * - * fdt_setprop_u64() sets the value of the named property in the given - * node to the given 64-bit integer value (converting to big-endian if - * necessary), or creates a new property with that value if it does - * not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, - uint64_t val) -{ - fdt64_t tmp = cpu_to_fdt64(val); - return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); -} - -/** - * fdt_setprop_cell - set a property to a single cell value - * - * This is an alternative name for fdt_setprop_u32() - */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) -{ - return fdt_setprop_u32(fdt, nodeoffset, name, val); -} - -/** - * fdt_setprop_string - set a property to a string value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @str: string value for the property - * - * fdt_setprop_string() sets the value of the named property in the - * given node to the given string value (using the length of the - * string to determine the new length of the property), or creates a - * new property with that value if it does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -#define fdt_setprop_string(fdt, nodeoffset, name, str) \ - fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) - -/** - * fdt_appendprop - append to or create a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to append to - * @val: pointer to data to append to the property value - * @len: length of the data to append to the property value - * - * fdt_appendprop() appends the value to the named property in the - * given node, creating the property if it does not already exist. - * - * This function may insert data into the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_appendprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_appendprop_u32 - append a 32-bit integer value to a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value to append to the property (native endian) - * - * fdt_appendprop_u32() appends the given 32-bit integer value - * (converting to big-endian if necessary) to the value of the named - * property in the given node, or creates a new property with that - * value if it does not already exist. - * - * This function may insert data into the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - fdt32_t tmp = cpu_to_fdt32(val); - return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); -} - -/** - * fdt_appendprop_u64 - append a 64-bit integer value to a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 64-bit integer value to append to the property (native endian) - * - * fdt_appendprop_u64() appends the given 64-bit integer value - * (converting to big-endian if necessary) to the value of the named - * property in the given node, or creates a new property with that - * value if it does not already exist. - * - * This function may insert data into the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, - const char *name, uint64_t val) -{ - fdt64_t tmp = cpu_to_fdt64(val); - return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); -} - -/** - * fdt_appendprop_cell - append a single cell value to a property - * - * This is an alternative name for fdt_appendprop_u32() - */ -static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - return fdt_appendprop_u32(fdt, nodeoffset, name, val); -} - -/** - * fdt_appendprop_string - append a string to a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @str: string value to append to the property - * - * fdt_appendprop_string() appends the given string to the value of - * the named property in the given node, or creates a new property - * with that value if it does not already exist. - * - * This function may insert data into the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -#define fdt_appendprop_string(fdt, nodeoffset, name, str) \ - fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) - -/** - * fdt_delprop - delete a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_del_property() will delete the given property. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_delprop(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_add_subnode_namelen - creates a new node based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_add_subnode(), but use only the first namelen - * characters of name as the name of the new node. This is useful for - * creating subnodes based on a portion of a larger string, such as a - * full path. - */ -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen); - -/** - * fdt_add_subnode - creates a new node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_add_subnode() creates a new node as a subnode of the node at - * structure block offset parentoffset, with the given name (which - * should include the unit address, if any). - * - * This function will insert data into the blob, and will therefore - * change the offsets of some existing nodes. - - * returns: - * structure block offset of the created nodeequested subnode (>=0), on - * success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE - * tag - * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of - * the given name - * -FDT_ERR_NOSPACE, if there is insufficient free space in the - * blob to contain the new node - * -FDT_ERR_NOSPACE - * -FDT_ERR_BADLAYOUT - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_add_subnode(void *fdt, int parentoffset, const char *name); - -/** - * fdt_del_node - delete a node (subtree) - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_del_node() will remove the given node, including all its - * subnodes if any, from the blob. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_node(void *fdt, int nodeoffset); - -/** - * fdt_overlay_apply - Applies a DT overlay on a base DT - * @fdt: pointer to the base device tree blob - * @fdto: pointer to the device tree overlay blob - * - * fdt_overlay_apply() will apply the given device tree overlay on the - * given base device tree. - * - * Expect the base device tree to be modified, even if the function - * returns an error. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there's not enough space in the base device tree - * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or - * properties in the base DT - * -FDT_ERR_BADPHANDLE, - * -FDT_ERR_BADOVERLAY, - * -FDT_ERR_NOPHANDLES, - * -FDT_ERR_INTERNAL, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADOFFSET, - * -FDT_ERR_BADPATH, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_overlay_apply(void *fdt, void *fdto); - -/**********************************************************************/ -/* Debugging / informational functions */ -/**********************************************************************/ - -const char *fdt_strerror(int errval); - -/** - * fdt_remove_unused_strings() - Remove any unused strings from an FDT - * - * This creates a new device tree in @new with unused strings removed. The - * called can then use fdt_pack() to minimise the space consumed. - * - * @old: Old device tree blog - * @new: Place to put new device tree blob, which must be as large as - * @old - * @return - * 0, on success - * -FDT_ERR_BADOFFSET, corrupt device tree - * -FDT_ERR_NOSPACE, out of space, which should not happen unless there - * is something very wrong with the device tree input - */ -int fdt_remove_unused_strings(const void *old, void *new); - -struct fdt_region { - int offset; - int size; -}; - -/* - * Flags for fdt_find_regions() - * - * Add a region for the string table (always the last region) - */ -#define FDT_REG_ADD_STRING_TAB (1 << 0) - -/* - * Add all supernodes of a matching node/property, useful for creating a - * valid subset tree - */ -#define FDT_REG_SUPERNODES (1 << 1) - -/* Add the FDT_BEGIN_NODE tags of subnodes, including their names */ -#define FDT_REG_DIRECT_SUBNODES (1 << 2) - -/* Add all subnodes of a matching node */ -#define FDT_REG_ALL_SUBNODES (1 << 3) - -/* Add a region for the mem_rsvmap table (always the first region) */ -#define FDT_REG_ADD_MEM_RSVMAP (1 << 4) - -/* Indicates what an fdt part is (node, property, value) */ -#define FDT_IS_NODE (1 << 0) -#define FDT_IS_PROP (1 << 1) -#define FDT_IS_VALUE (1 << 2) /* not supported */ -#define FDT_IS_COMPAT (1 << 3) /* used internally */ -#define FDT_NODE_HAS_PROP (1 << 4) /* node contains prop */ - -#define FDT_ANY_GLOBAL (FDT_IS_NODE | FDT_IS_PROP | FDT_IS_VALUE | \ - FDT_IS_COMPAT) -#define FDT_IS_ANY 0x1f /* all the above */ - -/* We set a reasonable limit on the number of nested nodes */ -#define FDT_MAX_DEPTH 32 - -/* Decribes what we want to include from the current tag */ -enum want_t { - WANT_NOTHING, - WANT_NODES_ONLY, /* No properties */ - WANT_NODES_AND_PROPS, /* Everything for one level */ - WANT_ALL_NODES_AND_PROPS /* Everything for all levels */ -}; - -/* Keeps track of the state at parent nodes */ -struct fdt_subnode_stack { - int offset; /* Offset of node */ - enum want_t want; /* The 'want' value here */ - int included; /* 1 if we included this node, 0 if not */ -}; - -struct fdt_region_ptrs { - int depth; /* Current tree depth */ - int done; /* What we have completed scanning */ - enum want_t want; /* What we are currently including */ - char *end; /* Pointer to end of full node path */ - int nextoffset; /* Next node offset to check */ -}; - -/* The state of our finding algortihm */ -struct fdt_region_state { - struct fdt_subnode_stack stack[FDT_MAX_DEPTH]; /* node stack */ - struct fdt_region *region; /* Contains list of regions found */ - int count; /* Numnber of regions found */ - const void *fdt; /* FDT blob */ - int max_regions; /* Maximum regions to find */ - int can_merge; /* 1 if we can merge with previous region */ - int start; /* Start position of current region */ - struct fdt_region_ptrs ptrs; /* Pointers for what we are up to */ -}; - -/** - * fdt_find_regions() - find regions in device tree - * - * Given a list of nodes to include and properties to exclude, find - * the regions of the device tree which describe those included parts. - * - * The intent is to get a list of regions which will be invariant provided - * those parts are invariant. For example, if you request a list of regions - * for all nodes but exclude the property "data", then you will get the - * same region contents regardless of any change to "data" properties. - * - * This function can be used to produce a byte-stream to send to a hashing - * function to verify that critical parts of the FDT have not changed. - * - * Nodes which are given in 'inc' are included in the region list, as - * are the names of the immediate subnodes nodes (but not the properties - * or subnodes of those subnodes). - * - * For eaxample "/" means to include the root node, all root properties - * and the FDT_BEGIN_NODE and FDT_END_NODE of all subnodes of /. The latter - * ensures that we capture the names of the subnodes. In a hashing situation - * it prevents the root node from changing at all Any change to non-excluded - * properties, names of subnodes or number of subnodes would be detected. - * - * When used with FITs this provides the ability to hash and sign parts of - * the FIT based on different configurations in the FIT. Then it is - * impossible to change anything about that configuration (include images - * attached to the configuration), but it may be possible to add new - * configurations, new images or new signatures within the existing - * framework. - * - * Adding new properties to a device tree may result in the string table - * being extended (if the new property names are different from those - * already added). This function can optionally include a region for - * the string table so that this can be part of the hash too. - * - * The device tree header is not included in the list. - * - * @fdt: Device tree to check - * @inc: List of node paths to included - * @inc_count: Number of node paths in list - * @exc_prop: List of properties names to exclude - * @exc_prop_count: Number of properties in exclude list - * @region: Returns list of regions - * @max_region: Maximum length of region list - * @path: Pointer to a temporary string for the function to use for - * building path names - * @path_len: Length of path, must be large enough to hold the longest - * path in the tree - * @add_string_tab: 1 to add a region for the string table - * @return number of regions in list. If this is >max_regions then the - * region array was exhausted. You should increase max_regions and try - * the call again. - */ -int fdt_find_regions(const void *fdt, char * const inc[], int inc_count, - char * const exc_prop[], int exc_prop_count, - struct fdt_region region[], int max_regions, - char *path, int path_len, int add_string_tab); - -/** - * fdt_first_region() - find regions in device tree - * - * Given a nodes and properties to include and properties to exclude, find - * the regions of the device tree which describe those included parts. - * - * The use for this function is twofold. Firstly it provides a convenient - * way of performing a structure-aware grep of the tree. For example it is - * possible to grep for a node and get all the properties associated with - * that node. Trees can be subsetted easily, by specifying the nodes that - * are required, and then writing out the regions returned by this function. - * This is useful for small resource-constrained systems, such as boot - * loaders, which want to use an FDT but do not need to know about all of - * it. - * - * Secondly it makes it easy to hash parts of the tree and detect changes. - * The intent is to get a list of regions which will be invariant provided - * those parts are invariant. For example, if you request a list of regions - * for all nodes but exclude the property "data", then you will get the - * same region contents regardless of any change to "data" properties. - * - * This function can be used to produce a byte-stream to send to a hashing - * function to verify that critical parts of the FDT have not changed. - * Note that semantically null changes in order could still cause false - * hash misses. Such reordering might happen if the tree is regenerated - * from source, and nodes are reordered (the bytes-stream will be emitted - * in a different order and mnay hash functions will detect this). However - * if an existing tree is modified using libfdt functions, such as - * fdt_add_subnode() and fdt_setprop(), then this problem is avoided. - * - * The nodes/properties to include/exclude are defined by a function - * provided by the caller. This function is called for each node and - * property, and must return: - * - * 0 - to exclude this part - * 1 - to include this part - * -1 - for FDT_IS_PROP only: no information is available, so include - * if its containing node is included - * - * The last case is only used to deal with properties. Often a property is - * included if its containing node is included - this is the case where - * -1 is returned.. However if the property is specifically required to be - * included/excluded, then 0 or 1 can be returned. Note that including a - * property when the FDT_REG_SUPERNODES flag is given will force its - * containing node to be included since it is not valid to have a property - * that is not in a node. - * - * Using the information provided, the inclusion of a node can be controlled - * either by a node name or its compatible string, or any other property - * that the function can determine. - * - * As an example, including node "/" means to include the root node and all - * root properties. A flag provides a way of also including supernodes (of - * which there is none for the root node), and another flag includes - * immediate subnodes, so in this case we would get the FDT_BEGIN_NODE and - * FDT_END_NODE of all subnodes of /. - * - * The subnode feature helps in a hashing situation since it prevents the - * root node from changing at all. Any change to non-excluded properties, - * names of subnodes or number of subnodes would be detected. - * - * When used with FITs this provides the ability to hash and sign parts of - * the FIT based on different configurations in the FIT. Then it is - * impossible to change anything about that configuration (include images - * attached to the configuration), but it may be possible to add new - * configurations, new images or new signatures within the existing - * framework. - * - * Adding new properties to a device tree may result in the string table - * being extended (if the new property names are different from those - * already added). This function can optionally include a region for - * the string table so that this can be part of the hash too. This is always - * the last region. - * - * The FDT also has a mem_rsvmap table which can also be included, and is - * always the first region if so. - * - * The device tree header is not included in the region list. Since the - * contents of the FDT are changing (shrinking, often), the caller will need - * to regenerate the header anyway. - * - * @fdt: Device tree to check - * @h_include: Function to call to determine whether to include a part or - * not: - * - * @priv: Private pointer as passed to fdt_find_regions() - * @fdt: Pointer to FDT blob - * @offset: Offset of this node / property - * @type: Type of this part, FDT_IS_... - * @data: Pointer to data (node name, property name, compatible - * string, value (not yet supported) - * @size: Size of data, or 0 if none - * @return 0 to exclude, 1 to include, -1 if no information is - * available - * @priv: Private pointer passed to h_include - * @region: Returns list of regions, sorted by offset - * @max_regions: Maximum length of region list - * @path: Pointer to a temporary string for the function to use for - * building path names - * @path_len: Length of path, must be large enough to hold the longest - * path in the tree - * @flags: Various flags that control the region algortihm, see - * FDT_REG_... - * @return number of regions in list. If this is >max_regions then the - * region array was exhausted. You should increase max_regions and try - * the call again. Only the first max_regions elements are available in the - * array. - * - * On error a -ve value is return, which can be: - * - * -FDT_ERR_BADSTRUCTURE (too deep or more END tags than BEGIN tags - * -FDT_ERR_BADLAYOUT - * -FDT_ERR_NOSPACE (path area is too small) - */ -int fdt_first_region(const void *fdt, - int (*h_include)(void *priv, const void *fdt, int offset, - int type, const char *data, int size), - void *priv, struct fdt_region *region, - char *path, int path_len, int flags, - struct fdt_region_state *info); - -/** fdt_next_region() - find next region - * - * See fdt_first_region() for full description. This function finds the - * next region according to the provided parameters, which must be the same - * as passed to fdt_first_region(). - * - * This function can additionally return -FDT_ERR_NOTFOUND when there are no - * more regions - */ -int fdt_next_region(const void *fdt, - int (*h_include)(void *priv, const void *fdt, int offset, - int type, const char *data, int size), - void *priv, struct fdt_region *region, - char *path, int path_len, int flags, - struct fdt_region_state *info); - -/** - * fdt_add_alias_regions() - find aliases that point to existing regions - * - * Once a device tree grep is complete some of the nodes will be present - * and some will have been dropped. This function checks all the alias nodes - * to figure out which points point to nodes which are still present. These - * aliases need to be kept, along with the nodes they reference. - * - * Given a list of regions function finds the aliases that still apply and - * adds more regions to the list for these. This function is called after - * fdt_next_region() has finished returning regions and requires the same - * state. - * - * @fdt: Device tree file to reference - * @region: List of regions that will be kept - * @count: Number of regions - * @max_regions: Number of entries that can fit in @region - * @info: Region state as returned from fdt_next_region() - * @return new number of regions in @region (i.e. count + the number added) - * or -FDT_ERR_NOSPACE if there was not enough space. - */ -int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, - int max_regions, struct fdt_region_state *info); - -#endif /* _LIBFDT_H */ +#include <../lib/libfdt/libfdt.h> diff --git a/lib/libfdt/fdt.h b/lib/libfdt/fdt.h new file mode 100644 index 0000000000..3134d78332 --- /dev/null +++ b/lib/libfdt/fdt.h @@ -0,0 +1,67 @@ +#ifndef _FDT_H +#define _FDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + * + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause + */ + +#ifndef __ASSEMBLY__ + +struct fdt_header { + fdt32_t magic; /* magic word FDT_MAGIC */ + fdt32_t totalsize; /* total size of DT block */ + fdt32_t off_dt_struct; /* offset to structure */ + fdt32_t off_dt_strings; /* offset to strings */ + fdt32_t off_mem_rsvmap; /* offset to memory reserve map */ + fdt32_t version; /* format version */ + fdt32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + fdt32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + fdt32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + fdt32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + fdt64_t address; + fdt64_t size; +}; + +struct fdt_node_header { + fdt32_t tag; + char name[0]; +}; + +struct fdt_property { + fdt32_t tag; + fdt32_t len; + fdt32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(fdt32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(fdt32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(fdt32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(fdt32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) + +#endif /* _FDT_H */ diff --git a/lib/libfdt/libfdt.h b/lib/libfdt/libfdt.h new file mode 100644 index 0000000000..2f7ebf8e06 --- /dev/null +++ b/lib/libfdt/libfdt.h @@ -0,0 +1,2144 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause + */ + +#include <libfdt_env.h> +#include <fdt.h> + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attempted to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. + * This can be caused either by an invalid phandle property + * length, or the phandle value was either 0 or -1, which are + * not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +/* Errors in device tree content */ +#define FDT_ERR_BADNCELLS 14 + /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells + * or similar property with a bad format or value */ + +#define FDT_ERR_BADVALUE 15 + /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected + * value. For example: a property expected to contain a string list + * is not NUL-terminated within the length of its value. */ + +#define FDT_ERR_BADOVERLAY 16 + /* FDT_ERR_BADOVERLAY: The device tree overlay, while + * correctly structured, cannot be applied due to some + * unexpected or missing value, property or node. */ + +#define FDT_ERR_NOPHANDLES 17 + /* FDT_ERR_NOPHANDLES: The device tree doesn't have any + * phandle available anymore without causing an overflow */ + +#define FDT_ERR_TOODEEP 18 + /* FDT_ERR_TOODEEP: The depth of a node has exceeded the internal + * libfdt limit. This can happen if you have more than + * FDT_MAX_DEPTH nested nodes. */ + +#define FDT_ERR_MAX 18 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +#ifndef SWIG /* This function is not useful in Python */ +const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); +#endif +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* Traversal functions */ +/**********************************************************************/ + +int fdt_next_node(const void *fdt, int offset, int *depth); + +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + +/** + * fdt_for_each_subnode - iterate over all subnodes of a parent + * + * @node: child node (int, lvalue) + * @fdt: FDT blob (const void *) + * @parent: parent node (int) + * + * This is actually a wrapper around a for loop and would be used like so: + * + * fdt_for_each_subnode(node, fdt, parent) { + * Use node + * ... + * } + * + * if ((node < 0) && (node != -FDT_ERR_NOT_FOUND)) { + * Error handling + * } + * + * Note that this is implemented as a macro and @node is used as + * iterator in the loop. The parent variable be constant or even a + * literal. + * + */ +#define fdt_for_each_subnode(node, fdt, parent) \ + for (node = fdt_first_subnode(fdt, parent); \ + node >= 0; \ + node = fdt_next_subnode(fdt, node)) + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = (struct fdt_header *)fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr + +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +/** + * fdt_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_get_max_phandle - retrieves the highest phandle in a tree + * @fdt: pointer to the device tree blob + * + * fdt_get_max_phandle retrieves the highest phandle in the given + * device tree. This will ignore badly formatted phandles, or phandles + * with a value of 0 or -1. + * + * returns: + * the highest phandle on success + * 0, if no phandle was found in the device tree + * -1, if an error occurred + */ +uint32_t fdt_get_max_phandle(const void *fdt); + +/** + * fdt_num_mem_rsv - retrieve the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retrieve one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +#endif +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset_namelen - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * @namelen: number of characters of path to consider + * + * Identical to fdt_path_offset(), but only consider the first namelen + * characters of path as the path name. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); +#endif + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on + * success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retrieve the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name + * (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_first_property_offset - find the offset of a node's first property + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * + * fdt_first_property_offset() finds the first property of the node at + * the given structure block offset. + * + * returns: + * structure block offset of the property (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested node has no properties + * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_first_property_offset(const void *fdt, int nodeoffset); + +/** + * fdt_next_property_offset - step through a node's properties + * @fdt: pointer to the device tree blob + * @offset: structure block offset of a property + * + * fdt_next_property_offset() finds the property immediately after the + * one at the given structure block offset. This will be a property + * of the same node as the given property. + * + * returns: + * structure block offset of the next property (>=0), on success + * -FDT_ERR_NOTFOUND, if the given property is the last in its node + * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_next_property_offset(const void *fdt, int offset); + +/** + * fdt_for_each_property_offset - iterate over all properties of a node + * + * @property_offset: property offset (int, lvalue) + * @fdt: FDT blob (const void *) + * @node: node offset (int) + * + * This is actually a wrapper around a for loop and would be used like so: + * + * fdt_for_each_property_offset(property, fdt, node) { + * Use property + * ... + * } + * + * if ((property < 0) && (property != -FDT_ERR_NOT_FOUND)) { + * Error handling + * } + * + * Note that this is implemented as a macro and property is used as + * iterator in the loop. The node variable can be constant or even a + * literal. + */ +#define fdt_for_each_property_offset(property, fdt, node) \ + for (property = fdt_first_property_offset(fdt, node); \ + property >= 0; \ + property = fdt_next_property_offset(fdt, property)) + +/** + * fdt_get_property_by_offset - retrieve the property at a given offset + * @fdt: pointer to the device tree blob + * @offset: offset of the property to retrieve + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property_by_offset() retrieves a pointer to the + * fdt_property structure within the device tree blob at the given + * offset. If lenp is non-NULL, the length of the property value is + * also returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property_by_offset(const void *fdt, + int offset, + int *lenp); + +/** + * fdt_get_property_namelen - find a property based on substring + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @namelen: number of characters of name to consider + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * Identical to fdt_get_property(), but only examine the first namelen + * characters of name for matching the property name. + */ +#ifndef SWIG /* Not available in Python */ +const struct fdt_property *fdt_get_property_namelen(const void *fdt, + int nodeoffset, + const char *name, + int namelen, int *lenp); +#endif + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value is also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)(uintptr_t) + fdt_get_property(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_getprop_by_offset - retrieve the value of a property at a given offset + * @fdt: pointer to the device tree blob + * @ffset: offset of the property to read + * @namep: pointer to a string variable (will be overwritten) or NULL + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop_by_offset() retrieves a pointer to the value of the + * property at structure block offset 'offset' (this will be a pointer + * to within the device blob itself, not a copy of the value). If + * lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. If namep is non-NULL, + * the property's namne will also be returned in the char * pointed to + * by namep (this will be a pointer to within the device tree's string + * block, not a new copy of the name). + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * if namep is non-NULL *namep contiains a pointer to the property + * name. + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#ifndef SWIG /* This function is not useful in Python */ +const void *fdt_getprop_by_offset(const void *fdt, int offset, + const char **namep, int *lenp); +#endif + +/** + * fdt_getprop_namelen - get property value based on substring + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @namelen: number of characters of name to consider + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * Identical to fdt_getprop(), but only examine the first namelen + * characters of name for matching the property name. + */ +#ifndef SWIG /* Not available in Python */ +const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, + const char *name, int namelen, int *lenp); +static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, + const char *name, int namelen, + int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, + namelen, lenp); +} +#endif + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retrieve the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on success (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_alias_namelen - get alias based on substring + * @fdt: pointer to the device tree blob + * @name: name of the alias th look up + * @namelen: number of characters of name to consider + * + * Identical to fdt_get_alias(), but only examine the first namelen + * characters of name for matching the alias name. + */ +#ifndef SWIG /* Not available in Python */ +const char *fdt_get_alias_namelen(const void *fdt, + const char *name, int namelen); +#endif + +/** + * fdt_get_alias - retrieve the path referenced by a given alias + * @fdt: pointer to the device tree blob + * @name: name of the alias th look up + * + * fdt_get_alias() retrieves the value of a given alias. That is, the + * value of the property named 'name' in the node /aliases. + * + * returns: + * a pointer to the expansion of the alias named 'name', if it exists + * NULL, if the given alias or the /aliases node does not exist + */ +const char *fdt_get_alias(const void *fdt, const char *name); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of + * nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * structure block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_phandle() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + +/** + * fdt_stringlist_count - count the number of strings in a string list + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @return: + * the number of strings in the given property + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist + */ +int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); + +/** + * fdt_stringlist_search - find a string in a string list and return its index + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @string: string to look up in the string list + * + * Note that it is possible for this function to succeed on property values + * that are not NUL-terminated. That's because the function will stop after + * finding the first occurrence of @string. This can for example happen with + * small-valued cell properties, such as #address-cells, when searching for + * the empty string. + * + * @return: + * the index of the string in the list of strings + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist or does not contain + * the given string + */ +int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, + const char *string); + +/** + * fdt_stringlist_get() - obtain the string at a given index in a string list + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @index: index of the string to return + * @lenp: return location for the string length or an error code on failure + * + * Note that this will successfully extract strings from properties with + * non-NUL-terminated values. For example on small-valued cell properties + * this function will return the empty string. + * + * If non-NULL, the length of the string (on success) or a negative error-code + * (on failure) will be stored in the integer pointer to by lenp. + * + * @return: + * A pointer to the string at the given index in the string list or NULL on + * failure. On success the length of the string will be stored in the memory + * location pointed to by the lenp parameter, if non-NULL. On failure one of + * the following negative error codes will be returned in the lenp parameter + * (if non-NULL): + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist + */ +const char *fdt_stringlist_get(const void *fdt, int nodeoffset, + const char *property, int index, + int *lenp); + +/**********************************************************************/ +/* Read-only functions (addressing related) */ +/**********************************************************************/ + +/** + * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells + * + * This is the maximum value for #address-cells, #size-cells and + * similar properties that will be processed by libfdt. IEE1275 + * requires that OF implementations handle values up to 4. + * Implementations may support larger values, but in practice higher + * values aren't used. + */ +#define FDT_MAX_NCELLS 4 + +/** + * fdt_address_cells - retrieve address size for a bus represented in the tree + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to find the address size for + * + * When the node has a valid #address-cells property, returns its value. + * + * returns: + * 0 <= n < FDT_MAX_NCELLS, on success + * 2, if the node has no #address-cells property + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #address-cells property + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_address_cells(const void *fdt, int nodeoffset); + +/** + * fdt_size_cells - retrieve address range size for a bus represented in the + * tree + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to find the address range size for + * + * When the node has a valid #size-cells property, returns its value. + * + * returns: + * 0 <= n < FDT_MAX_NCELLS, on success + * 2, if the node has no #address-cells property + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #size-cells property + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_size_cells(const void *fdt, int nodeoffset); + + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +/** + * fdt_setprop_inplace_namelen_partial - change a property's value, + * but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @namelen: number of characters of name to consider + * @idx: index of the property to change in the array + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * Identical to fdt_setprop_inplace(), but modifies the given property + * starting from the given index, and using only the first characters + * of the name. It is useful when you want to manipulate only one value of + * an array and you have a string that doesn't end with \0. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, + const char *name, int namelen, + uint32_t idx, const void *val, + int len); +#endif + +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#ifndef SWIG /* Not available in Python */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +#endif + +/** + * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to replace the property with + * + * fdt_setprop_inplace_u32() replaces the value of a given property + * with the 32-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to replace the property with + * + * fdt_setprop_inplace_u64() replaces the value of a given property + * with the 64-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 8. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * + * This is an alternative name for fdt_setprop_inplace_u32() + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +int fdt_create(void *buf, int bufsize); +int fdt_resize(void *fdt, void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_property(fdt, name, &tmp, sizeof(tmp)); +} +static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_property(fdt, name, &tmp, sizeof(tmp)); +} +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + return fdt_property_u32(fdt, name, val); +} + +/** + * fdt_property_placeholder - add a new property and return a ptr to its value + * + * @fdt: pointer to the device tree blob + * @name: name of property to add + * @len: length of property value in bytes + * @valp: returns a pointer to where where the value should be placed + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_NOSPACE, standard meanings + */ +int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); + +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_create_empty_tree(void *buf, int bufsize); +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_mem_rsv(void *fdt, int n); + +/** + * fdt_set_name - change the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * @name: name to give the node + * + * fdt_set_name() replaces the name (including unit address, if any) + * of the given node with the given string. NOTE: this function can't + * efficiently check if the new name is unique amongst the given + * node's siblings; results are undefined if this function is invoked + * with a name equal to one of the given node's siblings. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob + * to contain the new name + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_set_name(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_u32 - set a property to a 32-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_u32() sets the value of the named property in the given + * node to the given 32-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_u64 - set a property to a 64-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value for the property (native endian) + * + * fdt_setprop_u64() sets the value of the named property in the given + * node to the given 64-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, + uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_cell - set a property to a single cell value + * + * This is an alternative name for fdt_setprop_u32() + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + return fdt_setprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + + +/** + * fdt_setprop_empty - set a property to an empty value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * + * fdt_setprop_empty() sets the value of the named property in the + * given node to an empty (zero length) value, or creates a new empty + * property if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_empty(fdt, nodeoffset, name) \ + fdt_setprop((fdt), (nodeoffset), (name), NULL, 0) + +/** + * fdt_appendprop - append to or create a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to append to + * @val: pointer to data to append to the property value + * @len: length of the data to append to the property value + * + * fdt_appendprop() appends the value to the named property in the + * given node, creating the property if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_appendprop_u32 - append a 32-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u32() appends the given 32-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_appendprop_u64 - append a 64-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u64() appends the given 64-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_appendprop_cell - append a single cell value to a property + * + * This is an alternative name for fdt_appendprop_u32() + */ +static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_appendprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_appendprop_string - append a string to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value to append to the property + * + * fdt_appendprop_string() appends the given string to the value of + * the named property in the given node, or creates a new property + * with that value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_appendprop_string(fdt, nodeoffset, name, str) \ + fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); +#endif + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on + * success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE + * tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_node(void *fdt, int nodeoffset); + +/** + * fdt_overlay_apply - Applies a DT overlay on a base DT + * @fdt: pointer to the base device tree blob + * @fdto: pointer to the device tree overlay blob + * + * fdt_overlay_apply() will apply the given device tree overlay on the + * given base device tree. + * + * Expect the base device tree to be modified, even if the function + * returns an error. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there's not enough space in the base device tree + * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or + * properties in the base DT + * -FDT_ERR_BADPHANDLE, + * -FDT_ERR_BADOVERLAY, + * -FDT_ERR_NOPHANDLES, + * -FDT_ERR_INTERNAL, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADOFFSET, + * -FDT_ERR_BADPATH, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_overlay_apply(void *fdt, void *fdto); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +#ifndef SWIG /* Not available in Python */ +const char *fdt_strerror(int errval); + +/** + * fdt_remove_unused_strings() - Remove any unused strings from an FDT + * + * This creates a new device tree in @new with unused strings removed. The + * called can then use fdt_pack() to minimise the space consumed. + * + * @old: Old device tree blog + * @new: Place to put new device tree blob, which must be as large as + * @old + * @return + * 0, on success + * -FDT_ERR_BADOFFSET, corrupt device tree + * -FDT_ERR_NOSPACE, out of space, which should not happen unless there + * is something very wrong with the device tree input + */ +int fdt_remove_unused_strings(const void *old, void *new); + +struct fdt_region { + int offset; + int size; +}; + +/* + * Flags for fdt_find_regions() + * + * Add a region for the string table (always the last region) + */ +#define FDT_REG_ADD_STRING_TAB (1 << 0) + +/* + * Add all supernodes of a matching node/property, useful for creating a + * valid subset tree + */ +#define FDT_REG_SUPERNODES (1 << 1) + +/* Add the FDT_BEGIN_NODE tags of subnodes, including their names */ +#define FDT_REG_DIRECT_SUBNODES (1 << 2) + +/* Add all subnodes of a matching node */ +#define FDT_REG_ALL_SUBNODES (1 << 3) + +/* Add a region for the mem_rsvmap table (always the first region) */ +#define FDT_REG_ADD_MEM_RSVMAP (1 << 4) + +/* Indicates what an fdt part is (node, property, value) */ +#define FDT_IS_NODE (1 << 0) +#define FDT_IS_PROP (1 << 1) +#define FDT_IS_VALUE (1 << 2) /* not supported */ +#define FDT_IS_COMPAT (1 << 3) /* used internally */ +#define FDT_NODE_HAS_PROP (1 << 4) /* node contains prop */ + +#define FDT_ANY_GLOBAL (FDT_IS_NODE | FDT_IS_PROP | FDT_IS_VALUE | \ + FDT_IS_COMPAT) +#define FDT_IS_ANY 0x1f /* all the above */ + +/* We set a reasonable limit on the number of nested nodes */ +#define FDT_MAX_DEPTH 32 + +/* Decribes what we want to include from the current tag */ +enum want_t { + WANT_NOTHING, + WANT_NODES_ONLY, /* No properties */ + WANT_NODES_AND_PROPS, /* Everything for one level */ + WANT_ALL_NODES_AND_PROPS /* Everything for all levels */ +}; + +/* Keeps track of the state at parent nodes */ +struct fdt_subnode_stack { + int offset; /* Offset of node */ + enum want_t want; /* The 'want' value here */ + int included; /* 1 if we included this node, 0 if not */ +}; + +struct fdt_region_ptrs { + int depth; /* Current tree depth */ + int done; /* What we have completed scanning */ + enum want_t want; /* What we are currently including */ + char *end; /* Pointer to end of full node path */ + int nextoffset; /* Next node offset to check */ +}; + +/* The state of our finding algortihm */ +struct fdt_region_state { + struct fdt_subnode_stack stack[FDT_MAX_DEPTH]; /* node stack */ + struct fdt_region *region; /* Contains list of regions found */ + int count; /* Numnber of regions found */ + const void *fdt; /* FDT blob */ + int max_regions; /* Maximum regions to find */ + int can_merge; /* 1 if we can merge with previous region */ + int start; /* Start position of current region */ + struct fdt_region_ptrs ptrs; /* Pointers for what we are up to */ +}; + +/** + * fdt_find_regions() - find regions in device tree + * + * Given a list of nodes to include and properties to exclude, find + * the regions of the device tree which describe those included parts. + * + * The intent is to get a list of regions which will be invariant provided + * those parts are invariant. For example, if you request a list of regions + * for all nodes but exclude the property "data", then you will get the + * same region contents regardless of any change to "data" properties. + * + * This function can be used to produce a byte-stream to send to a hashing + * function to verify that critical parts of the FDT have not changed. + * + * Nodes which are given in 'inc' are included in the region list, as + * are the names of the immediate subnodes nodes (but not the properties + * or subnodes of those subnodes). + * + * For eaxample "/" means to include the root node, all root properties + * and the FDT_BEGIN_NODE and FDT_END_NODE of all subnodes of /. The latter + * ensures that we capture the names of the subnodes. In a hashing situation + * it prevents the root node from changing at all Any change to non-excluded + * properties, names of subnodes or number of subnodes would be detected. + * + * When used with FITs this provides the ability to hash and sign parts of + * the FIT based on different configurations in the FIT. Then it is + * impossible to change anything about that configuration (include images + * attached to the configuration), but it may be possible to add new + * configurations, new images or new signatures within the existing + * framework. + * + * Adding new properties to a device tree may result in the string table + * being extended (if the new property names are different from those + * already added). This function can optionally include a region for + * the string table so that this can be part of the hash too. + * + * The device tree header is not included in the list. + * + * @fdt: Device tree to check + * @inc: List of node paths to included + * @inc_count: Number of node paths in list + * @exc_prop: List of properties names to exclude + * @exc_prop_count: Number of properties in exclude list + * @region: Returns list of regions + * @max_region: Maximum length of region list + * @path: Pointer to a temporary string for the function to use for + * building path names + * @path_len: Length of path, must be large enough to hold the longest + * path in the tree + * @add_string_tab: 1 to add a region for the string table + * @return number of regions in list. If this is >max_regions then the + * region array was exhausted. You should increase max_regions and try + * the call again. + */ +int fdt_find_regions(const void *fdt, char * const inc[], int inc_count, + char * const exc_prop[], int exc_prop_count, + struct fdt_region region[], int max_regions, + char *path, int path_len, int add_string_tab); + +/** + * fdt_first_region() - find regions in device tree + * + * Given a nodes and properties to include and properties to exclude, find + * the regions of the device tree which describe those included parts. + * + * The use for this function is twofold. Firstly it provides a convenient + * way of performing a structure-aware grep of the tree. For example it is + * possible to grep for a node and get all the properties associated with + * that node. Trees can be subsetted easily, by specifying the nodes that + * are required, and then writing out the regions returned by this function. + * This is useful for small resource-constrained systems, such as boot + * loaders, which want to use an FDT but do not need to know about all of + * it. + * + * Secondly it makes it easy to hash parts of the tree and detect changes. + * The intent is to get a list of regions which will be invariant provided + * those parts are invariant. For example, if you request a list of regions + * for all nodes but exclude the property "data", then you will get the + * same region contents regardless of any change to "data" properties. + * + * This function can be used to produce a byte-stream to send to a hashing + * function to verify that critical parts of the FDT have not changed. + * Note that semantically null changes in order could still cause false + * hash misses. Such reordering might happen if the tree is regenerated + * from source, and nodes are reordered (the bytes-stream will be emitted + * in a different order and mnay hash functions will detect this). However + * if an existing tree is modified using libfdt functions, such as + * fdt_add_subnode() and fdt_setprop(), then this problem is avoided. + * + * The nodes/properties to include/exclude are defined by a function + * provided by the caller. This function is called for each node and + * property, and must return: + * + * 0 - to exclude this part + * 1 - to include this part + * -1 - for FDT_IS_PROP only: no information is available, so include + * if its containing node is included + * + * The last case is only used to deal with properties. Often a property is + * included if its containing node is included - this is the case where + * -1 is returned.. However if the property is specifically required to be + * included/excluded, then 0 or 1 can be returned. Note that including a + * property when the FDT_REG_SUPERNODES flag is given will force its + * containing node to be included since it is not valid to have a property + * that is not in a node. + * + * Using the information provided, the inclusion of a node can be controlled + * either by a node name or its compatible string, or any other property + * that the function can determine. + * + * As an example, including node "/" means to include the root node and all + * root properties. A flag provides a way of also including supernodes (of + * which there is none for the root node), and another flag includes + * immediate subnodes, so in this case we would get the FDT_BEGIN_NODE and + * FDT_END_NODE of all subnodes of /. + * + * The subnode feature helps in a hashing situation since it prevents the + * root node from changing at all. Any change to non-excluded properties, + * names of subnodes or number of subnodes would be detected. + * + * When used with FITs this provides the ability to hash and sign parts of + * the FIT based on different configurations in the FIT. Then it is + * impossible to change anything about that configuration (include images + * attached to the configuration), but it may be possible to add new + * configurations, new images or new signatures within the existing + * framework. + * + * Adding new properties to a device tree may result in the string table + * being extended (if the new property names are different from those + * already added). This function can optionally include a region for + * the string table so that this can be part of the hash too. This is always + * the last region. + * + * The FDT also has a mem_rsvmap table which can also be included, and is + * always the first region if so. + * + * The device tree header is not included in the region list. Since the + * contents of the FDT are changing (shrinking, often), the caller will need + * to regenerate the header anyway. + * + * @fdt: Device tree to check + * @h_include: Function to call to determine whether to include a part or + * not: + * + * @priv: Private pointer as passed to fdt_find_regions() + * @fdt: Pointer to FDT blob + * @offset: Offset of this node / property + * @type: Type of this part, FDT_IS_... + * @data: Pointer to data (node name, property name, compatible + * string, value (not yet supported) + * @size: Size of data, or 0 if none + * @return 0 to exclude, 1 to include, -1 if no information is + * available + * @priv: Private pointer passed to h_include + * @region: Returns list of regions, sorted by offset + * @max_regions: Maximum length of region list + * @path: Pointer to a temporary string for the function to use for + * building path names + * @path_len: Length of path, must be large enough to hold the longest + * path in the tree + * @flags: Various flags that control the region algortihm, see + * FDT_REG_... + * @return number of regions in list. If this is >max_regions then the + * region array was exhausted. You should increase max_regions and try + * the call again. Only the first max_regions elements are available in the + * array. + * + * On error a -ve value is return, which can be: + * + * -FDT_ERR_BADSTRUCTURE (too deep or more END tags than BEGIN tags + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_NOSPACE (path area is too small) + */ +int fdt_first_region(const void *fdt, + int (*h_include)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + void *priv, struct fdt_region *region, + char *path, int path_len, int flags, + struct fdt_region_state *info); + +/** fdt_next_region() - find next region + * + * See fdt_first_region() for full description. This function finds the + * next region according to the provided parameters, which must be the same + * as passed to fdt_first_region(). + * + * This function can additionally return -FDT_ERR_NOTFOUND when there are no + * more regions + */ +int fdt_next_region(const void *fdt, + int (*h_include)(void *priv, const void *fdt, int offset, + int type, const char *data, int size), + void *priv, struct fdt_region *region, + char *path, int path_len, int flags, + struct fdt_region_state *info); + +/** + * fdt_add_alias_regions() - find aliases that point to existing regions + * + * Once a device tree grep is complete some of the nodes will be present + * and some will have been dropped. This function checks all the alias nodes + * to figure out which points point to nodes which are still present. These + * aliases need to be kept, along with the nodes they reference. + * + * Given a list of regions function finds the aliases that still apply and + * adds more regions to the list for these. This function is called after + * fdt_next_region() has finished returning regions and requires the same + * state. + * + * @fdt: Device tree file to reference + * @region: List of regions that will be kept + * @count: Number of regions + * @max_regions: Number of entries that can fit in @region + * @info: Region state as returned from fdt_next_region() + * @return new number of regions in @region (i.e. count + the number added) + * or -FDT_ERR_NOSPACE if there was not enough space. + */ +int fdt_add_alias_regions(const void *fdt, struct fdt_region *region, int count, + int max_regions, struct fdt_region_state *info); +#endif /* SWIG */ + +#endif /* _LIBFDT_H */
U-Boot needs to provide some swig include directories. Add this feature.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
lib/libfdt/pylibfdt/setup.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lib/libfdt/pylibfdt/setup.py b/lib/libfdt/pylibfdt/setup.py index 38a844cb6d..daf1089425 100755 --- a/lib/libfdt/pylibfdt/setup.py +++ b/lib/libfdt/pylibfdt/setup.py @@ -97,12 +97,12 @@ files = os.environ.get('SOURCES', '').split() cflags = os.environ.get('CPPFLAGS', '').split() objdir = os.environ.get('OBJDIR') version = os.environ.get('VERSION') -swig_opts = [] +swig_opts = os.environ.get('SWIG_OPTS', '').split()
# If we were called directly rather than through our Makefile (which is often # the case with Python module installation), read the settings from the # Makefile. -if not all((version, files, cflags, objdir)): +if not all((swig_opts, version, files, cflags, objdir)): swig_opts, version, files, cflags, objdir = GetEnvFromMakefiles()
libfdt_module = Extension(
At present only a subset of source files are build. Add the rest and refactor this so that a source file list is available also. This will be used in later commit.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/Makefile | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/Makefile b/tools/Makefile index 2fc4a583d4..dadc75b912 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -60,9 +60,11 @@ hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o # Flattened device tree objects -LIBFDT_OBJS := $(addprefix lib/libfdt/, \ - fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_wip.o \ - fdt_region.o fdt_sw.o) +LIBFDT_CSRCS := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c \ + fdt_empty_tree.c fdt_addresses.c fdt_overlay.c \ + fdt_region.c +LIBFDT_OBJS := $(addprefix lib/libfdt/, $(patsubst %.c, %.o, $(LIBFDT_CSRCS))) + RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ rsa-sign.o rsa-verify.o rsa-checksum.o \ rsa-mod-exp.o)
Now that this module has been accepted upstream we should stop using the local U-Boot one. In preparation for this, rename it to indicate it is for legacy use.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
lib/libfdt/{libfdt.swig => libfdt_legacy.swig} | 3 +-- lib/libfdt/setup.py | 6 +++--- tools/Makefile | 11 ++++++----- tools/dtoc/fdt_normal.py | 2 +- 4 files changed, 11 insertions(+), 11 deletions(-) rename lib/libfdt/{libfdt.swig => libfdt_legacy.swig} (98%)
diff --git a/lib/libfdt/libfdt.swig b/lib/libfdt/libfdt_legacy.swig similarity index 98% rename from lib/libfdt/libfdt.swig rename to lib/libfdt/libfdt_legacy.swig index b24c72b1a2..9880dd998e 100644 --- a/lib/libfdt/libfdt.swig +++ b/lib/libfdt/libfdt_legacy.swig @@ -1,5 +1,4 @@ -/* File: libfdt.i */ -%module libfdt +%module libfdt_legacy
%{ #define SWIG_FILE_WITH_INIT diff --git a/lib/libfdt/setup.py b/lib/libfdt/setup.py index 845a0c2b10..fc881351c6 100644 --- a/lib/libfdt/setup.py +++ b/lib/libfdt/setup.py @@ -22,17 +22,17 @@ else: cflags = None
libfdt_module = Extension( - '_libfdt', + '_libfdt_legacy', sources = files, extra_compile_args = cflags )
sys.argv = [progname, '--quiet', 'build_ext', '--inplace', '--force']
-setup (name = 'libfdt', +setup (name = 'libfdt_legaacy', version = '0.1', author = "SWIG Docs", description = """Simple swig libfdt from docs""", ext_modules = [libfdt_module], - py_modules = ["libfdt"], + py_modules = ["libfdt_legacy"], ) diff --git a/tools/Makefile b/tools/Makefile index dadc75b912..cd08d3b33b 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -117,16 +117,17 @@ fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o # Build a libfdt Python module if swig is available # Use 'sudo apt-get install swig libpython-dev' to enable this hostprogs-y += \ - $(if $(shell which swig 2> /dev/null),_libfdt.so) -_libfdt.so-sharedobjs += $(LIBFDT_OBJS) + $(if $(shell which swig 2> /dev/null),_libfdt_legacy.so) +_libfdt_legacy.so-sharedobjs += $(LIBFDT_OBJS) libfdt:
-tools/_libfdt.so: $(patsubst %.o,%.c,$(LIBFDT_OBJS)) tools/libfdt_wrap.c +tools/_libfdt_legacy.so: $(patsubst %.o,%.c,$(LIBFDT_OBJS)) \ + tools/libfdt_legacy_wrap.c LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= ${PYTHON} $(srctree)/lib/libfdt/setup.py \ "$(_hostc_flags)" $^ - mv _libfdt.so $@ + mv _libfdt_legacy.so $@
-tools/libfdt_wrap.c: $(srctree)/lib/libfdt/libfdt.swig +tools/libfdt_legacy_wrap.c: $(srctree)/lib/libfdt/libfdt_legacy.swig swig -python -o $@ $<
# TODO(sjg@chromium.org): Is this correct on Mac OS? diff --git a/tools/dtoc/fdt_normal.py b/tools/dtoc/fdt_normal.py index cce5c06d8c..17b0a9a726 100644 --- a/tools/dtoc/fdt_normal.py +++ b/tools/dtoc/fdt_normal.py @@ -12,7 +12,7 @@ import sys import fdt from fdt import Fdt, NodeBase, PropBase import fdt_util -import libfdt +import libfdt_legacy as libfdt
# This deals with a device tree, presenting it as a list of Node and Prop # objects, representing nodes and properties, respectively.
Build the upstream python libfdt module. At present the legacy module is still built and is the one that it used. Future work will switch this over.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: - More machinations to avoid touching the source directory
Changes in v2: - Fix building when srcpath is ".."
tools/Makefile | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/tools/Makefile b/tools/Makefile index cd08d3b33b..bc411e4ae4 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -63,6 +63,16 @@ FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o LIBFDT_CSRCS := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c \ fdt_empty_tree.c fdt_addresses.c fdt_overlay.c \ fdt_region.c + +# Unfortunately setup.py below cannot handle srctree being ".." which it often +# is. It fails with an error like: +# Fatal error: can't create build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o: +# No such file or directory +# To fix this, use an absolute path. +libfdt_tree := $(shell readlink -f $(srctree)/lib/libfdt) + +LIBFDT_SRCS := $(addprefix $(libfdt_tree)/, $(LIBFDT_CSRCS)) +LIBFDT_SWIG := $(addprefix $(libfdt_tree)/, pylibfdt/libfdt.i) LIBFDT_OBJS := $(addprefix lib/libfdt/, $(patsubst %.c, %.o, $(LIBFDT_CSRCS)))
RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \ @@ -114,6 +124,23 @@ mkimage-objs := $(dumpimage-mkimage-objs) mkimage.o fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
+# Unfortunately setup.py (or actually the Python distutil implementation) +# puts files into the same directory as the .i file. We cannot touch the source +# directory, so we copy the .i file into the tools/ build subdirectory before +# calling setup. This directory is safe to write to. This ensures that we get +# all three files in $(obj)/tools: _libfdt.so, libfdt.py and libfdt_wrap.c +# The latter is a temporary file which we could actually remove. +tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG) + cp $(LIBFDT_SWIG) tools/. + unset CC; \ + unset CROSS_COMPILE; \ + LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \ + CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \ + SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \ + SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \ + $(libfdt_tree)/pylibfdt/setup.py --quiet build_ext \ + --build-lib tools + # Build a libfdt Python module if swig is available # Use 'sudo apt-get install swig libpython-dev' to enable this hostprogs-y += \ @@ -219,6 +246,10 @@ clean-dirs := lib common
always := $(hostprogs-y)
+# Build a libfdt Python module if swig is available +# Use 'sudo apt-get install swig libpython-dev' to enable this +always += $(if $(shell which swig 2> /dev/null),_libfdt.so) + # Generated LCD/video logo LOGO_H = $(objtree)/include/bmp_logo.h LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
Since fdt is a module it conflicts with this variable name and prevents it being used in tests. Rename the variable.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/binman/fdt_test.py | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/tools/binman/fdt_test.py b/tools/binman/fdt_test.py index 1d9494e52f..12edeaba6c 100644 --- a/tools/binman/fdt_test.py +++ b/tools/binman/fdt_test.py @@ -28,21 +28,21 @@ class TestFdt(unittest.TestCase): def GetCompiled(self, fname): return fdt_util.EnsureCompiled(self.TestFile(fname))
- def _DeleteProp(self, fdt): - node = fdt.GetNode('/microcode/update@0') + def _DeleteProp(self, dt): + node = dt.GetNode('/microcode/update@0') node.DeleteProp('data')
def testFdtNormal(self): fname = self.GetCompiled('34_x86_ucode.dts') - fdt = FdtScan(fname) - self._DeleteProp(fdt) + dt = FdtScan(fname) + self._DeleteProp(dt)
def testFdtFallback(self): fname = self.GetCompiled('34_x86_ucode.dts') - fdt = FdtScan(fname, True) - fdt.GetProp('/microcode/update@0', 'data') + dt = FdtScan(fname, True) + dt.GetProp('/microcode/update@0', 'data') self.assertEqual('fred', - fdt.GetProp('/microcode/update@0', 'none', default='fred')) + dt.GetProp('/microcode/update@0', 'none', default='fred')) self.assertEqual('12345678 12345679', - fdt.GetProp('/microcode/update@0', 'data', typespec='x')) - self._DeleteProp(fdt) + dt.GetProp('/microcode/update@0', 'data', typespec='x')) + self._DeleteProp(dt)
The tests don't currently cover all the different property types. Add a new test which checks each property type in turn, to make sure each has the correct type and value.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/binman/fdt_test.py | 46 ++++++++++++++++++++++++++++++++++++++ tools/binman/test/45_prop_test.dts | 23 +++++++++++++++++++ 2 files changed, 69 insertions(+) create mode 100644 tools/binman/test/45_prop_test.dts
diff --git a/tools/binman/fdt_test.py b/tools/binman/fdt_test.py index 12edeaba6c..65fb947386 100644 --- a/tools/binman/fdt_test.py +++ b/tools/binman/fdt_test.py @@ -11,6 +11,7 @@ import sys import tempfile import unittest
+import fdt from fdt_select import FdtScan import fdt_util import tools @@ -37,6 +38,51 @@ class TestFdt(unittest.TestCase): dt = FdtScan(fname) self._DeleteProp(dt)
+ def testFdtNormalProp(self): + fname = self.GetCompiled('45_prop_test.dts') + dt = FdtScan(fname) + node = dt.GetNode('/binman/intel-me') + self.assertEquals('intel-me', node.name) + val = fdt_util.GetString(node, 'filename') + self.assertEquals(str, type(val)) + self.assertEquals('me.bin', val) + + prop = node.props['intval'] + self.assertEquals(fdt.TYPE_INT, prop.type) + self.assertEquals(3, fdt_util.GetInt(node, 'intval')) + + prop = node.props['intarray'] + self.assertEquals(fdt.TYPE_INT, prop.type) + self.assertEquals(list, type(prop.value)) + self.assertEquals(2, len(prop.value)) + self.assertEquals([5, 6], + [fdt_util.fdt32_to_cpu(val) for val in prop.value]) + + prop = node.props['byteval'] + self.assertEquals(fdt.TYPE_BYTE, prop.type) + self.assertEquals(chr(8), prop.value) + + prop = node.props['bytearray'] + self.assertEquals(fdt.TYPE_BYTE, prop.type) + self.assertEquals(list, type(prop.value)) + self.assertEquals(str, type(prop.value[0])) + self.assertEquals(3, len(prop.value)) + self.assertEquals([chr(1), '#', '4'], prop.value) + + prop = node.props['longbytearray'] + self.assertEquals(fdt.TYPE_INT, prop.type) + self.assertEquals(0x090a0b0c, fdt_util.GetInt(node, 'longbytearray')) + + prop = node.props['stringval'] + self.assertEquals(fdt.TYPE_STRING, prop.type) + self.assertEquals('message2', fdt_util.GetString(node, 'stringval')) + + prop = node.props['stringarray'] + self.assertEquals(fdt.TYPE_STRING, prop.type) + self.assertEquals(list, type(prop.value)) + self.assertEquals(3, len(prop.value)) + self.assertEquals(['another', 'multi-word', 'message'], prop.value) + def testFdtFallback(self): fname = self.GetCompiled('34_x86_ucode.dts') dt = FdtScan(fname, True) diff --git a/tools/binman/test/45_prop_test.dts b/tools/binman/test/45_prop_test.dts new file mode 100644 index 0000000000..d22e460d29 --- /dev/null +++ b/tools/binman/test/45_prop_test.dts @@ -0,0 +1,23 @@ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + sort-by-pos; + end-at-4gb; + size = <16>; + intel-me { + filename = "me.bin"; + pos-unset; + intval = <3>; + intarray = <5 6>; + byteval = [08]; + bytearray = [01 23 34]; + longbytearray = [09 0a 0b 0c]; + stringval = "message2"; + stringarray = "another", "multi-word", "message"; + }; + }; +};
Use the new library if available, while retaining backwards compatibility with the old library for now.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: - Drop changes which are now in any earlier patch
Changes in v2: None
tools/binman/binman.py | 3 +++ tools/dtoc/fdt.py | 1 + tools/dtoc/fdt_normal.py | 35 ++++++++++++++++++++++++++--------- 3 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/tools/binman/binman.py b/tools/binman/binman.py index 857d698b4c..95d3a048d8 100755 --- a/tools/binman/binman.py +++ b/tools/binman/binman.py @@ -21,6 +21,9 @@ sys.path.append(os.path.join(our_path, '../patman')) sys.path.append(os.path.join(our_path, '../dtoc')) sys.path.append(os.path.join(our_path, '../'))
+# Bring in the libfdt module +sys.path.append('tools') + # Also allow entry-type modules to be brought in from the etype directory. sys.path.append(os.path.join(our_path, 'etype'))
diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py index 816fdbe525..c40b9b6bab 100644 --- a/tools/dtoc/fdt.py +++ b/tools/dtoc/fdt.py @@ -96,6 +96,7 @@ class PropBase: TYPE_INT: a byte-swapped integer stored as a 4-byte string TYPE_BYTE: a byte stored as a single-byte string """ + bytes = str(bytes) size = len(bytes) strings = bytes.split('\0') is_string = True diff --git a/tools/dtoc/fdt_normal.py b/tools/dtoc/fdt_normal.py index 17b0a9a726..e793f49fa8 100644 --- a/tools/dtoc/fdt_normal.py +++ b/tools/dtoc/fdt_normal.py @@ -12,7 +12,13 @@ import sys import fdt from fdt import Fdt, NodeBase, PropBase import fdt_util -import libfdt_legacy as libfdt +try: + import libfdt + legacy = False +except ImportError: + import libfdt_legacy as libfdt + legacy = True +
# This deals with a device tree, presenting it as a list of Node and Prop # objects, representing nodes and properties, respectively. @@ -36,7 +42,7 @@ class Prop(PropBase): """ def __init__(self, node, offset, name, bytes): PropBase.__init__(self, node, offset, name) - self.bytes = bytes + self.bytes = str(bytes) if not bytes: self.type = fdt.TYPE_BOOL self.value = True @@ -86,7 +92,10 @@ class Node(NodeBase): offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.Offset()) while offset >= 0: sep = '' if self.path[-1] == '/' else '/' - name = libfdt.Name(self._fdt.GetFdt(), offset) + if legacy: + name = libfdt.Name(self._fdt.GetFdt(), offset) + else: + name = self._fdt._fdt_obj.get_name(offset) path = self.path + sep + name node = Node(self._fdt, offset, name, path) self.subnodes.append(node) @@ -139,6 +148,8 @@ class FdtNormal(Fdt):
with open(self._fname) as fd: self._fdt = bytearray(fd.read()) + if not legacy: + self._fdt_obj = libfdt.Fdt(self._fdt)
def GetFdt(self): """Get the contents of the FDT @@ -175,12 +186,18 @@ class FdtNormal(Fdt): props_dict = {} poffset = libfdt.fdt_first_property_offset(self._fdt, node._offset) while poffset >= 0: - dprop, plen = libfdt.fdt_get_property_by_offset(self._fdt, poffset) - prop = Prop(node, poffset, libfdt.String(self._fdt, dprop.nameoff), - libfdt.Data(dprop)) - props_dict[prop.name] = prop - - poffset = libfdt.fdt_next_property_offset(self._fdt, poffset) + if legacy: + dprop, plen = libfdt.fdt_get_property_by_offset(self._fdt, + poffset) + prop = Prop(node, poffset, + libfdt.String(self._fdt, dprop.nameoff), + libfdt.Data(dprop)) + else: + p = self._fdt_obj.get_property_by_offset(poffset) + prop = Prop(node, poffset, p.name, p.value) + props_dict[prop.name] = prop + + poffset = libfdt.fdt_next_property_offset(self._fdt, poffset) return props_dict
def Invalidate(self):
This is needed by binman and dtoc, so if those are being used, check that the library is present and complain if not.
This means that the fallback library (which uses fdtget) will not be used anymore and swig will need to be installed to use binman / dtoc.
This affects any board which uses binman (currently sunxi and x86) or dtoc (anything that uses CONFIG_SPL_OF_PLATDATA, currently some rockchip boards).
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
Makefile | 16 ++++++++++++++-- scripts/Makefile.spl | 17 +++++++++++++---- 2 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/Makefile b/Makefile index 1b7cab2121..89e0451a49 100644 --- a/Makefile +++ b/Makefile @@ -1116,7 +1116,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \ $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \ - $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE + $(if $(CONFIG_HAVE_REFCODE),refcode.bin) checkbinman FORCE $(call if_changed,binman)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec @@ -1125,7 +1125,8 @@ u-boot-x86-16bit.bin: u-boot FORCE endif
ifneq ($(CONFIG_ARCH_SUNXI),) -u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb \ + checkbinman FORCE $(call if_changed,binman) endif
@@ -1354,6 +1355,17 @@ $(version_h): include/config/uboot.release FORCE $(timestamp_h): $(srctree)/Makefile FORCE $(call filechk,timestamp.h)
+checkbinman: tools + @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools python )); then \ + echo '*** binman needs the Python libfdt library. Either '; \ + echo '*** install it on your system, or try:'; \ + echo '***'; \ + echo '*** sudo apt-get install swig libpython-dev'; \ + echo '***'; \ + echo '*** to have U-Boot build its own version.'; \ + false; \ + fi + # --------------------------------------------------------------------------- quiet_cmd_cpp_lds = LDS $@ cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \ diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 135706f21d..ac3c2c7f13 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -257,14 +257,12 @@ PHONY += dts_dir dts_dir: $(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
-include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir dtoc +include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc $(call if_changed,dtoch)
-$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir dtoc +$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir checkdtoc $(call if_changed,dtocc)
-dtoc: #$(objtree)/tools/_libfdt.so - ifdef CONFIG_SAMSUNG ifdef CONFIG_VAR_SIZE_SPL VAR_SIZE_PARAM = --vs @@ -357,6 +355,17 @@ ifneq ($(cmd_files),) include $(cmd_files) endif
+checkdtoc: tools + @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools python )); then \ + echo '*** dtoc needs the Python libfdt library. Either '; \ + echo '*** install it on your system, or try:'; \ + echo '***'; \ + echo '*** sudo apt-get install swig libpython-dev'; \ + echo '***'; \ + echo '*** to have U-Boot build its own version.'; \ + false; \ + fi + PHONY += FORCE FORCE:
This is no-longer needed, so stop building it.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
lib/libfdt/libfdt_legacy.swig | 112 ------------------------------------------ lib/libfdt/setup.py | 38 -------------- tools/Makefile | 18 ------- 3 files changed, 168 deletions(-) delete mode 100644 lib/libfdt/libfdt_legacy.swig delete mode 100644 lib/libfdt/setup.py
diff --git a/lib/libfdt/libfdt_legacy.swig b/lib/libfdt/libfdt_legacy.swig deleted file mode 100644 index 9880dd998e..0000000000 --- a/lib/libfdt/libfdt_legacy.swig +++ /dev/null @@ -1,112 +0,0 @@ -%module libfdt_legacy - -%{ -#define SWIG_FILE_WITH_INIT -#include "libfdt.h" -%} - -%pythoncode %{ -def Raise(errnum): - raise ValueError('Error %s' % fdt_strerror(errnum)) - -def Name(fdt, offset): - name, len = fdt_get_name(fdt, offset) - return name - -def String(fdt, offset): - offset = fdt32_to_cpu(offset) - name = fdt_string(fdt, offset) - return name - -def swap32(x): - return (((x << 24) & 0xFF000000) | - ((x << 8) & 0x00FF0000) | - ((x >> 8) & 0x0000FF00) | - ((x >> 24) & 0x000000FF)) - -def fdt32_to_cpu(x): - return swap32(x) - -def Data(prop): - set_prop(prop) - return get_prop_data() -%} - -%include "typemaps.i" -%include "cstring.i" - -%typemap(in) void* = char*; - -typedef int fdt32_t; - -struct fdt_property { - fdt32_t tag; - fdt32_t len; - fdt32_t nameoff; - char data[0]; -}; - -/* - * This is a work-around since I'm not sure of a better way to copy out the - * contents of a string. This is used in dtoc/GetProps(). The intent is to - * pass in a pointer to a property and access the data field at the end of - * it. Ideally the Data() function above would be able to do this directly, - * but I'm not sure how to do that. - */ -#pragma SWIG nowarn=454 -%inline %{ - static struct fdt_property *cur_prop; - - void set_prop(struct fdt_property *prop) { - cur_prop = prop; - } -%} - -%cstring_output_allocate_size(char **s, int *sz, free(*$1)); -%inline %{ - void get_prop_data(char **s, int *sz) { - *sz = fdt32_to_cpu(cur_prop->len); - *s = (char *)malloc(*sz); - if (!*s) - *sz = 0; - else - memcpy(*s, cur_prop + 1, *sz); - } -%} - -%typemap(in) (const void *) { - if (!PyByteArray_Check($input)) { - SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname" "', argument " - "$argnum"" of type '" "$type""'"); - } - $1 = (void *) PyByteArray_AsString($input); -} - -const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); -int fdt_path_offset(const void *fdt, const char *path); -int fdt_first_property_offset(const void *fdt, int nodeoffset); -int fdt_next_property_offset(const void *fdt, int offset); -const char *fdt_strerror(int errval); -const struct fdt_property *fdt_get_property_by_offset(const void *fdt, - int offset, - int *OUTPUT); -const char *fdt_get_name(const void *fdt, int nodeoffset, int *OUTPUT); -const char *fdt_string(const void *fdt, int stroffset); -int fdt_first_subnode(const void *fdt, int offset); -int fdt_next_subnode(const void *fdt, int offset); - -%typemap(in) (void *) { - if (!PyByteArray_Check($input)) { - SWIG_exception_fail(SWIG_TypeError, "in method '" "$symname" "', argument " - "$argnum"" of type '" "$type""'"); - } - $1 = PyByteArray_AsString($input); -} - -int fdt_delprop(void *fdt, int nodeoffset, const char *name); - -const char *fdt_strerror(int errval); -int fdt_pack(void *fdt); - -int fdt_totalsize(const void *fdt); -int fdt_off_dt_struct(const void *fdt); diff --git a/lib/libfdt/setup.py b/lib/libfdt/setup.py deleted file mode 100644 index fc881351c6..0000000000 --- a/lib/libfdt/setup.py +++ /dev/null @@ -1,38 +0,0 @@ -#!/usr/bin/env python - -""" -setup.py file for SWIG libfdt -""" - -from distutils.core import setup, Extension -import os -import sys - -# Don't cross-compile - always use the host compiler. -del os.environ['CROSS_COMPILE'] -del os.environ['CC'] - -progname = sys.argv[0] -cflags = sys.argv[1] -files = sys.argv[2:] - -if cflags: - cflags = [flag for flag in cflags.split(' ') if flag] -else: - cflags = None - -libfdt_module = Extension( - '_libfdt_legacy', - sources = files, - extra_compile_args = cflags -) - -sys.argv = [progname, '--quiet', 'build_ext', '--inplace', '--force'] - -setup (name = 'libfdt_legaacy', - version = '0.1', - author = "SWIG Docs", - description = """Simple swig libfdt from docs""", - ext_modules = [libfdt_module], - py_modules = ["libfdt_legacy"], - ) diff --git a/tools/Makefile b/tools/Makefile index bc411e4ae4..cb1683e153 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -141,24 +141,6 @@ tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG) $(libfdt_tree)/pylibfdt/setup.py --quiet build_ext \ --build-lib tools
-# Build a libfdt Python module if swig is available -# Use 'sudo apt-get install swig libpython-dev' to enable this -hostprogs-y += \ - $(if $(shell which swig 2> /dev/null),_libfdt_legacy.so) -_libfdt_legacy.so-sharedobjs += $(LIBFDT_OBJS) -libfdt: - -tools/_libfdt_legacy.so: $(patsubst %.o,%.c,$(LIBFDT_OBJS)) \ - tools/libfdt_legacy_wrap.c - LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= ${PYTHON} $(srctree)/lib/libfdt/setup.py \ - "$(_hostc_flags)" $^ - mv _libfdt_legacy.so $@ - -tools/libfdt_legacy_wrap.c: $(srctree)/lib/libfdt/libfdt_legacy.swig - swig -python -o $@ $< - -# TODO(sjg@chromium.org): Is this correct on Mac OS? - ifneq ($(CONFIG_MX23)$(CONFIG_MX28),) # Add CONFIG_MXS into host CFLAGS, so we can check whether or not register # the mxsimage support within tools/mxsimage.c .
Now that this is no-longer available, stop looking for it. The new module will be used if available.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/dtoc/fdt_normal.py | 32 ++++++++------------------------ 1 file changed, 8 insertions(+), 24 deletions(-)
diff --git a/tools/dtoc/fdt_normal.py b/tools/dtoc/fdt_normal.py index e793f49fa8..a0e58a4464 100644 --- a/tools/dtoc/fdt_normal.py +++ b/tools/dtoc/fdt_normal.py @@ -12,12 +12,7 @@ import sys import fdt from fdt import Fdt, NodeBase, PropBase import fdt_util -try: - import libfdt - legacy = False -except ImportError: - import libfdt_legacy as libfdt - legacy = True +import libfdt
# This deals with a device tree, presenting it as a list of Node and Prop @@ -92,10 +87,7 @@ class Node(NodeBase): offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.Offset()) while offset >= 0: sep = '' if self.path[-1] == '/' else '/' - if legacy: - name = libfdt.Name(self._fdt.GetFdt(), offset) - else: - name = self._fdt._fdt_obj.get_name(offset) + name = self._fdt._fdt_obj.get_name(offset) path = self.path + sep + name node = Node(self._fdt, offset, name, path) self.subnodes.append(node) @@ -148,8 +140,7 @@ class FdtNormal(Fdt):
with open(self._fname) as fd: self._fdt = bytearray(fd.read()) - if not legacy: - self._fdt_obj = libfdt.Fdt(self._fdt) + self._fdt_obj = libfdt.Fdt(self._fdt)
def GetFdt(self): """Get the contents of the FDT @@ -186,18 +177,11 @@ class FdtNormal(Fdt): props_dict = {} poffset = libfdt.fdt_first_property_offset(self._fdt, node._offset) while poffset >= 0: - if legacy: - dprop, plen = libfdt.fdt_get_property_by_offset(self._fdt, - poffset) - prop = Prop(node, poffset, - libfdt.String(self._fdt, dprop.nameoff), - libfdt.Data(dprop)) - else: - p = self._fdt_obj.get_property_by_offset(poffset) - prop = Prop(node, poffset, p.name, p.value) - props_dict[prop.name] = prop - - poffset = libfdt.fdt_next_property_offset(self._fdt, poffset) + p = self._fdt_obj.get_property_by_offset(poffset) + prop = Prop(node, poffset, p.name, p.value) + props_dict[prop.name] = prop + + poffset = libfdt.fdt_next_property_offset(self._fdt, poffset) return props_dict
def Invalidate(self):
Drop this now-unused library and associated tests.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/binman/fdt_test.py | 10 --- tools/binman/func_test.py | 42 ++++------- tools/dtoc/fdt.py | 4 +- tools/dtoc/fdt_fallback.py | 181 --------------------------------------------- tools/dtoc/fdt_select.py | 24 +----- 5 files changed, 18 insertions(+), 243 deletions(-) delete mode 100644 tools/dtoc/fdt_fallback.py
diff --git a/tools/binman/fdt_test.py b/tools/binman/fdt_test.py index 65fb947386..df2b0a6af7 100644 --- a/tools/binman/fdt_test.py +++ b/tools/binman/fdt_test.py @@ -82,13 +82,3 @@ class TestFdt(unittest.TestCase): self.assertEquals(list, type(prop.value)) self.assertEquals(3, len(prop.value)) self.assertEquals(['another', 'multi-word', 'message'], prop.value) - - def testFdtFallback(self): - fname = self.GetCompiled('34_x86_ucode.dts') - dt = FdtScan(fname, True) - dt.GetProp('/microcode/update@0', 'data') - self.assertEqual('fred', - dt.GetProp('/microcode/update@0', 'none', default='fred')) - self.assertEqual('12345678 12345679', - dt.GetProp('/microcode/update@0', 'data', typespec='x')) - self._DeleteProp(dt) diff --git a/tools/binman/func_test.py b/tools/binman/func_test.py index 740fa9e4e2..7328d03b5c 100644 --- a/tools/binman/func_test.py +++ b/tools/binman/func_test.py @@ -683,7 +683,7 @@ class TestFunctional(unittest.TestCase): self.assertEqual('nodtb with microcode' + pos_and_size + ' somewhere in here', first)
- def _RunPackUbootSingleMicrocode(self, collate): + def _RunPackUbootSingleMicrocode(self): """Test that x86 microcode can be handled correctly
We expect to see the following in the image, in order: @@ -695,8 +695,6 @@ class TestFunctional(unittest.TestCase): # We need the libfdt library to run this test since only that allows # finding the offset of a property. This is required by # Entry_u_boot_dtb_with_ucode.ObtainContents(). - if not fdt_select.have_libfdt: - return data = self._DoReadFile('35_x86_single_ucode.dts', True)
second = data[len(U_BOOT_NODTB_DATA):] @@ -705,34 +703,22 @@ class TestFunctional(unittest.TestCase): third = second[fdt_len:] second = second[:fdt_len]
- if not collate: - ucode_data = struct.pack('>2L', 0x12345678, 0x12345679) - self.assertIn(ucode_data, second) - ucode_pos = second.find(ucode_data) + len(U_BOOT_NODTB_DATA) + ucode_data = struct.pack('>2L', 0x12345678, 0x12345679) + self.assertIn(ucode_data, second) + ucode_pos = second.find(ucode_data) + len(U_BOOT_NODTB_DATA)
- # Check that the microcode pointer was inserted. It should match the - # expected position and size - pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos, - len(ucode_data)) - first = data[:len(U_BOOT_NODTB_DATA)] - self.assertEqual('nodtb with microcode' + pos_and_size + - ' somewhere in here', first) + # Check that the microcode pointer was inserted. It should match the + # expected position and size + pos_and_size = struct.pack('<2L', 0xfffffe00 + ucode_pos, + len(ucode_data)) + first = data[:len(U_BOOT_NODTB_DATA)] + self.assertEqual('nodtb with microcode' + pos_and_size + + ' somewhere in here', first)
def testPackUbootSingleMicrocode(self): """Test that x86 microcode can be handled correctly with fdt_normal. """ - self._RunPackUbootSingleMicrocode(False) - - def testPackUbootSingleMicrocodeFallback(self): - """Test that x86 microcode can be handled correctly with fdt_fallback. - - This only supports collating the microcode. - """ - try: - old_val = fdt_select.UseFallback(True) - self._RunPackUbootSingleMicrocode(True) - finally: - fdt_select.UseFallback(old_val) + self._RunPackUbootSingleMicrocode()
def testUBootImg(self): """Test that u-boot.img can be put in a file""" @@ -763,14 +749,12 @@ class TestFunctional(unittest.TestCase): def testMicrocodeWithoutPtrInElf(self): """Test that a U-Boot binary without the microcode symbol is detected""" # ELF file without a '_dt_ucode_base_size' symbol - if not fdt_select.have_libfdt: - return try: with open(self.TestFile('u_boot_no_ucode_ptr')) as fd: TestFunctional._MakeInputFile('u-boot', fd.read())
with self.assertRaises(ValueError) as e: - self._RunPackUbootSingleMicrocode(False) + self._RunPackUbootSingleMicrocode() self.assertIn("Node '/binman/u-boot-with-ucode-ptr': Cannot locate " "_dt_ucode_base_size symbol in u-boot", str(e.exception))
diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py index c40b9b6bab..dedd3d7501 100644 --- a/tools/dtoc/fdt.py +++ b/tools/dtoc/fdt.py @@ -14,8 +14,8 @@ import fdt_util # This deals with a device tree, presenting it as an assortment of Node and # Prop objects, representing nodes and properties, respectively. This file # contains the base classes and defines the high-level API. Most of the -# implementation is in the FdtFallback and FdtNormal subclasses. See -# fdt_select.py for how to create an Fdt object. +# implementation is in the FdtNormal subclass. See fdt_select.py for how to +# create an Fdt object.
# A list of types we support (TYPE_BYTE, TYPE_INT, TYPE_STRING, TYPE_BOOL) = range(4) diff --git a/tools/dtoc/fdt_fallback.py b/tools/dtoc/fdt_fallback.py deleted file mode 100644 index 23e26796c8..0000000000 --- a/tools/dtoc/fdt_fallback.py +++ /dev/null @@ -1,181 +0,0 @@ -#!/usr/bin/python -# -# Copyright (C) 2016 Google, Inc -# Written by Simon Glass sjg@chromium.org -# -# SPDX-License-Identifier: GPL-2.0+ -# - -import command -import fdt -from fdt import Fdt, NodeBase, PropBase -import fdt_util -import sys - -# This deals with a device tree, presenting it as a list of Node and Prop -# objects, representing nodes and properties, respectively. -# -# This implementation uses the fdtget tool to access the device tree, so it -# is not very efficient for larger trees. The tool is called once for each -# node and property in the tree. - -class Prop(PropBase): - """A device tree property - - Properties: - name: Property name (as per the device tree) - value: Property value as a string of bytes, or a list of strings of - bytes - type: Value type - """ - def __init__(self, node, name, byte_list_str): - PropBase.__init__(self, node, 0, name) - if not byte_list_str.strip(): - self.type = fdt.TYPE_BOOL - return - self.bytes = [chr(int(byte, 16)) - for byte in byte_list_str.strip().split(' ')] - self.type, self.value = self.BytesToValue(''.join(self.bytes)) - - -class Node(NodeBase): - """A device tree node - - Properties: - name: Device tree node tname - path: Full path to node, along with the node name itself - _fdt: Device tree object - subnodes: A list of subnodes for this node, each a Node object - props: A dict of properties for this node, each a Prop object. - Keyed by property name - """ - def __init__(self, fdt, offset, name, path): - NodeBase.__init__(self, fdt, offset, name, path) - - def Scan(self): - """Scan a node's properties and subnodes - - This fills in the props and subnodes properties, recursively - searching into subnodes so that the entire tree is built. - """ - for name, byte_list_str in self._fdt.GetProps(self.path).items(): - prop = Prop(self, name, byte_list_str) - self.props[name] = prop - - for name in self._fdt.GetSubNodes(self.path): - sep = '' if self.path[-1] == '/' else '/' - path = self.path + sep + name - node = Node(self._fdt, 0, name, path) - self.subnodes.append(node) - - node.Scan() - - def DeleteProp(self, prop_name): - """Delete a property of a node - - The property is deleted using fdtput. - - Args: - prop_name: Name of the property to delete - Raises: - CommandError if the property does not exist - """ - args = [self._fdt._fname, '-d', self.path, prop_name] - command.Output('fdtput', *args) - del self.props[prop_name] - -class FdtFallback(Fdt): - """Provides simple access to a flat device tree blob using fdtget/fdtput - - Properties: - See superclass - """ - - def __init__(self, fname): - Fdt.__init__(self, fname) - if self._fname: - self._fname = fdt_util.EnsureCompiled(self._fname) - - def GetSubNodes(self, node): - """Returns a list of sub-nodes of a given node - - Args: - node: Node name to return children from - - Returns: - List of children in the node (each a string node name) - - Raises: - CmdError: if the node does not exist. - """ - out = command.Output('fdtget', self._fname, '-l', node) - return out.strip().splitlines() - - def GetProps(self, node): - """Get all properties from a node - - Args: - node: full path to node name to look in - - Returns: - A dictionary containing all the properties, indexed by node name. - The entries are simply strings - no decoding of lists or numbers - is done. - - Raises: - CmdError: if the node does not exist. - """ - out = command.Output('fdtget', self._fname, node, '-p') - props = out.strip().splitlines() - props_dict = {} - for prop in props: - name = prop - props_dict[prop] = self.GetProp(node, name) - return props_dict - - def GetProp(self, node, prop, default=None, typespec=None): - """Get a property from a device tree. - - This looks up the given node and property, and returns the value as a - string, - - If the node or property does not exist, this will return the default - value. - - Args: - node: Full path to node to look up. - prop: Property name to look up. - default: Default value to return if nothing is present in the fdt, - or None to raise in this case. This will be converted to a - string. - typespec: Type character to use (None for default, 's' for string) - - Returns: - string containing the property value. - - Raises: - CmdError: if the property does not exist and no default is provided. - """ - args = [self._fname, node, prop, '-t', 'bx'] - if default is not None: - args += ['-d', str(default)] - if typespec is not None: - args += ['-t', typespec] - out = command.Output('fdtget', *args) - return out.strip() - - @classmethod - def Node(self, fdt, offset, name, path): - """Create a new node - - This is used by Fdt.Scan() to create a new node using the correct - class. - - Args: - fdt: Fdt object - offset: Offset of node - name: Node name - path: Full path to node - """ - node = Node(fdt, offset, name, path) - return node diff --git a/tools/dtoc/fdt_select.py b/tools/dtoc/fdt_select.py index ea78c527fc..54a3ef2e46 100644 --- a/tools/dtoc/fdt_select.py +++ b/tools/dtoc/fdt_select.py @@ -6,31 +6,13 @@ # SPDX-License-Identifier: GPL-2.0+ #
-import fdt_fallback - # Bring in either the normal fdt library (which relies on libfdt) or the # fallback one (which uses fdtget and is slower). Both provide the same # interface for this file to use. -try: - import fdt_normal - have_libfdt = True -except ImportError: - have_libfdt = False - -force_fallback = False +import fdt_normal
-def FdtScan(fname, _force_fallback=False): +def FdtScan(fname): """Returns a new Fdt object from the implementation we are using""" - if have_libfdt and not force_fallback and not _force_fallback: - dtb = fdt_normal.FdtNormal(fname) - else: - dtb = fdt_fallback.FdtFallback(fname) + dtb = fdt_normal.FdtNormal(fname) dtb.Scan() return dtb - -def UseFallback(fallback): - global force_fallback - - old_val = force_fallback - force_fallback = fallback - return old_val
Previously we were sometimes forced to collate x86 microcode due to not having access to the offset of each individual piece. Now that we never use fdt_fallback, we don't have this problem. Drop this special case from the code.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/binman/etype/u_boot_dtb_with_ucode.py | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py index fc02c67c14..95405c6473 100644 --- a/tools/binman/etype/u_boot_dtb_with_ucode.py +++ b/tools/binman/etype/u_boot_dtb_with_ucode.py @@ -57,17 +57,12 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob): data_prop = node.props.get('data') if data_prop: self.ucode_data += ''.join(data_prop.bytes) - if not self.collate: - poffset = data_prop.GetOffset() - if poffset is None: - # We cannot obtain a property offset. Collate instead. - self.collate = True - else: - # Find the offset in the device tree of the ucode data - self.ucode_offset = poffset + 12 - self.ucode_size = len(data_prop.bytes) if self.collate: prop = node.DeleteProp('data') + else: + # Find the offset in the device tree of the ucode data + self.ucode_offset = data_prop.GetOffset() + 12 + self.ucode_size = len(data_prop.bytes) if self.collate: fdt.Pack() fdt.Flush()
Since we only have one Fdt implementation now we don't need to have a base class. Merge the implementation and the base class together.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/dtoc/fdt.py | 176 +++++++++++++++++++++++++++++++----- tools/dtoc/fdt_normal.py | 226 ----------------------------------------------- tools/dtoc/fdt_select.py | 8 +- 3 files changed, 157 insertions(+), 253 deletions(-) delete mode 100644 tools/dtoc/fdt_normal.py
diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py index dedd3d7501..bff31d1c92 100644 --- a/tools/dtoc/fdt.py +++ b/tools/dtoc/fdt.py @@ -10,12 +10,15 @@ import struct import sys
import fdt_util +import libfdt
# This deals with a device tree, presenting it as an assortment of Node and # Prop objects, representing nodes and properties, respectively. This file -# contains the base classes and defines the high-level API. Most of the -# implementation is in the FdtNormal subclass. See fdt_select.py for how to -# create an Fdt object. +# contains the base classes and defines the high-level API. See fdt_select.py +# for how to create an Fdt object. + +# This implementation uses a libfdt Python library to access the device tree, +# so it is fairly efficient.
# A list of types we support (TYPE_BYTE, TYPE_INT, TYPE_STRING, TYPE_BOOL) = range(4) @@ -25,7 +28,7 @@ def CheckErr(errnum, msg): raise ValueError('Error %d: %s: %s' % (errnum, libfdt.fdt_strerror(errnum), msg))
-class PropBase: +class Prop: """A device tree property
Properties: @@ -34,11 +37,17 @@ class PropBase: bytes type: Value type """ - def __init__(self, node, offset, name): + def __init__(self, node, offset, name, bytes): self._node = node self._offset = offset self.name = name self.value = None + self.bytes = str(bytes) + if not bytes: + self.type = TYPE_BOOL + self.value = True + return + self.type, self.value = self.BytesToValue(bytes)
def GetPhandle(self): """Get a (single) phandle value from a property @@ -148,15 +157,12 @@ class PropBase: def GetOffset(self): """Get the offset of a property
- This can be implemented by subclasses. - Returns: - The offset of the property (struct fdt_property) within the - file, or None if not known. + The offset of the property (struct fdt_property) within the file """ - return None + return self._node._fdt.GetStructOffset(self._offset)
-class NodeBase: +class Node: """A device tree node
Properties: @@ -189,25 +195,65 @@ class NodeBase: return subnode return None
+ def Offset(self): + """Returns the offset of a node, after checking the cache + + This should be used instead of self._offset directly, to ensure that + the cache does not contain invalid offsets. + """ + self._fdt.CheckCache() + return self._offset + def Scan(self): - """Scan the subnodes of a node + """Scan a node's properties and subnodes + + This fills in the props and subnodes properties, recursively + searching into subnodes so that the entire tree is built. + """ + self.props = self._fdt.GetProps(self) + + offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.Offset()) + while offset >= 0: + sep = '' if self.path[-1] == '/' else '/' + name = self._fdt._fdt_obj.get_name(offset) + path = self.path + sep + name + node = Node(self._fdt, offset, name, path) + self.subnodes.append(node)
- This should be implemented by subclasses + node.Scan() + offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset) + + def Refresh(self, my_offset): + """Fix up the _offset for each node, recursively + + Note: This does not take account of property offsets - these will not + be updated. """ - raise NotImplementedError() + if self._offset != my_offset: + #print '%s: %d -> %d\n' % (self.path, self._offset, my_offset) + self._offset = my_offset + offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self._offset) + for subnode in self.subnodes: + subnode.Refresh(offset) + offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset)
def DeleteProp(self, prop_name): """Delete a property of a node
- This should be implemented by subclasses + The property is deleted and the offset cache is invalidated.
Args: prop_name: Name of the property to delete + Raises: + ValueError if the property does not exist """ - raise NotImplementedError() + CheckErr(libfdt.fdt_delprop(self._fdt.GetFdt(), self.Offset(), prop_name), + "Node '%s': delete property: '%s'" % (self.path, prop_name)) + del self.props[prop_name] + self._fdt.Invalidate()
class Fdt: - """Provides simple access to a flat device tree blob. + """Provides simple access to a flat device tree blob using libfdts.
Properties: fname: Filename of fdt @@ -215,6 +261,13 @@ class Fdt: """ def __init__(self, fname): self._fname = fname + self._cached_offsets = False + if self._fname: + self._fname = fdt_util.EnsureCompiled(self._fname) + + with open(self._fname) as fd: + self._fdt = bytearray(fd.read()) + self._fdt_obj = libfdt.Fdt(self._fdt)
def Scan(self, root='/'): """Scan a device tree, building up a tree of Node objects @@ -256,15 +309,94 @@ class Fdt: """Flush device tree changes back to the file
If the device tree has changed in memory, write it back to the file. - Subclasses can implement this if needed. """ - pass + with open(self._fname, 'wb') as fd: + fd.write(self._fdt)
def Pack(self): """Pack the device tree down to its minimum size
When nodes and properties shrink or are deleted, wasted space can - build up in the device tree binary. Subclasses can implement this - to remove that spare space. + build up in the device tree binary. + """ + CheckErr(libfdt.fdt_pack(self._fdt), 'pack') + fdt_len = libfdt.fdt_totalsize(self._fdt) + del self._fdt[fdt_len:] + + def GetFdt(self): + """Get the contents of the FDT + + Returns: + The FDT contents as a string of bytes + """ + return self._fdt + + def CheckErr(errnum, msg): + if errnum: + raise ValueError('Error %d: %s: %s' % + (errnum, libfdt.fdt_strerror(errnum), msg)) + + + def GetProps(self, node): + """Get all properties from a node. + + Args: + node: Full path to node name to look in. + + Returns: + A dictionary containing all the properties, indexed by node name. + The entries are Prop objects. + + Raises: + ValueError: if the node does not exist. + """ + props_dict = {} + poffset = libfdt.fdt_first_property_offset(self._fdt, node._offset) + while poffset >= 0: + p = self._fdt_obj.get_property_by_offset(poffset) + prop = Prop(node, poffset, p.name, p.value) + props_dict[prop.name] = prop + + poffset = libfdt.fdt_next_property_offset(self._fdt, poffset) + return props_dict + + def Invalidate(self): + """Mark our offset cache as invalid""" + self._cached_offsets = False + + def CheckCache(self): + """Refresh the offset cache if needed""" + if self._cached_offsets: + return + self.Refresh() + self._cached_offsets = True + + def Refresh(self): + """Refresh the offset cache""" + self._root.Refresh(0) + + def GetStructOffset(self, offset): + """Get the file offset of a given struct offset + + Args: + offset: Offset within the 'struct' region of the device tree + Returns: + Position of @offset within the device tree binary """ - pass + return libfdt.fdt_off_dt_struct(self._fdt) + offset + + @classmethod + def Node(self, fdt, offset, name, path): + """Create a new node + + This is used by Fdt.Scan() to create a new node using the correct + class. + + Args: + fdt: Fdt object + offset: Offset of node + name: Node name + path: Full path to node + """ + node = Node(fdt, offset, name, path) + return node diff --git a/tools/dtoc/fdt_normal.py b/tools/dtoc/fdt_normal.py deleted file mode 100644 index a0e58a4464..0000000000 --- a/tools/dtoc/fdt_normal.py +++ /dev/null @@ -1,226 +0,0 @@ -#!/usr/bin/python -# -# Copyright (C) 2016 Google, Inc -# Written by Simon Glass sjg@chromium.org -# -# SPDX-License-Identifier: GPL-2.0+ -# - -import struct -import sys - -import fdt -from fdt import Fdt, NodeBase, PropBase -import fdt_util -import libfdt - - -# This deals with a device tree, presenting it as a list of Node and Prop -# objects, representing nodes and properties, respectively. -# -# This implementation uses a libfdt Python library to access the device tree, -# so it is fairly efficient. - -def CheckErr(errnum, msg): - if errnum: - raise ValueError('Error %d: %s: %s' % - (errnum, libfdt.fdt_strerror(errnum), msg)) - -class Prop(PropBase): - """A device tree property - - Properties: - name: Property name (as per the device tree) - value: Property value as a string of bytes, or a list of strings of - bytes - type: Value type - """ - def __init__(self, node, offset, name, bytes): - PropBase.__init__(self, node, offset, name) - self.bytes = str(bytes) - if not bytes: - self.type = fdt.TYPE_BOOL - self.value = True - return - self.type, self.value = self.BytesToValue(bytes) - - def GetOffset(self): - """Get the offset of a property - - Returns: - The offset of the property (struct fdt_property) within the file - """ - return self._node._fdt.GetStructOffset(self._offset) - -class Node(NodeBase): - """A device tree node - - Properties: - offset: Integer offset in the device tree - name: Device tree node tname - path: Full path to node, along with the node name itself - _fdt: Device tree object - subnodes: A list of subnodes for this node, each a Node object - props: A dict of properties for this node, each a Prop object. - Keyed by property name - """ - def __init__(self, fdt, offset, name, path): - NodeBase.__init__(self, fdt, offset, name, path) - - def Offset(self): - """Returns the offset of a node, after checking the cache - - This should be used instead of self._offset directly, to ensure that - the cache does not contain invalid offsets. - """ - self._fdt.CheckCache() - return self._offset - - def Scan(self): - """Scan a node's properties and subnodes - - This fills in the props and subnodes properties, recursively - searching into subnodes so that the entire tree is built. - """ - self.props = self._fdt.GetProps(self) - - offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self.Offset()) - while offset >= 0: - sep = '' if self.path[-1] == '/' else '/' - name = self._fdt._fdt_obj.get_name(offset) - path = self.path + sep + name - node = Node(self._fdt, offset, name, path) - self.subnodes.append(node) - - node.Scan() - offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset) - - def Refresh(self, my_offset): - """Fix up the _offset for each node, recursively - - Note: This does not take account of property offsets - these will not - be updated. - """ - if self._offset != my_offset: - #print '%s: %d -> %d\n' % (self.path, self._offset, my_offset) - self._offset = my_offset - offset = libfdt.fdt_first_subnode(self._fdt.GetFdt(), self._offset) - for subnode in self.subnodes: - subnode.Refresh(offset) - offset = libfdt.fdt_next_subnode(self._fdt.GetFdt(), offset) - - def DeleteProp(self, prop_name): - """Delete a property of a node - - The property is deleted and the offset cache is invalidated. - - Args: - prop_name: Name of the property to delete - Raises: - ValueError if the property does not exist - """ - CheckErr(libfdt.fdt_delprop(self._fdt.GetFdt(), self.Offset(), prop_name), - "Node '%s': delete property: '%s'" % (self.path, prop_name)) - del self.props[prop_name] - self._fdt.Invalidate() - -class FdtNormal(Fdt): - """Provides simple access to a flat device tree blob using libfdt. - - Properties: - _fdt: Device tree contents (bytearray) - _cached_offsets: True if all the nodes have a valid _offset property, - False if something has changed to invalidate the offsets - """ - def __init__(self, fname): - Fdt.__init__(self, fname) - self._cached_offsets = False - if self._fname: - self._fname = fdt_util.EnsureCompiled(self._fname) - - with open(self._fname) as fd: - self._fdt = bytearray(fd.read()) - self._fdt_obj = libfdt.Fdt(self._fdt) - - def GetFdt(self): - """Get the contents of the FDT - - Returns: - The FDT contents as a string of bytes - """ - return self._fdt - - def Flush(self): - """Flush device tree changes back to the file""" - with open(self._fname, 'wb') as fd: - fd.write(self._fdt) - - def Pack(self): - """Pack the device tree down to its minimum size""" - CheckErr(libfdt.fdt_pack(self._fdt), 'pack') - fdt_len = libfdt.fdt_totalsize(self._fdt) - del self._fdt[fdt_len:] - - def GetProps(self, node): - """Get all properties from a node. - - Args: - node: Full path to node name to look in. - - Returns: - A dictionary containing all the properties, indexed by node name. - The entries are Prop objects. - - Raises: - ValueError: if the node does not exist. - """ - props_dict = {} - poffset = libfdt.fdt_first_property_offset(self._fdt, node._offset) - while poffset >= 0: - p = self._fdt_obj.get_property_by_offset(poffset) - prop = Prop(node, poffset, p.name, p.value) - props_dict[prop.name] = prop - - poffset = libfdt.fdt_next_property_offset(self._fdt, poffset) - return props_dict - - def Invalidate(self): - """Mark our offset cache as invalid""" - self._cached_offsets = False - - def CheckCache(self): - """Refresh the offset cache if needed""" - if self._cached_offsets: - return - self.Refresh() - self._cached_offsets = True - - def Refresh(self): - """Refresh the offset cache""" - self._root.Refresh(0) - - def GetStructOffset(self, offset): - """Get the file offset of a given struct offset - - Args: - offset: Offset within the 'struct' region of the device tree - Returns: - Position of @offset within the device tree binary - """ - return libfdt.fdt_off_dt_struct(self._fdt) + offset - - @classmethod - def Node(self, fdt, offset, name, path): - """Create a new node - - This is used by Fdt.Scan() to create a new node using the correct - class. - - Args: - fdt: Fdt object - offset: Offset of node - name: Node name - path: Full path to node - """ - node = Node(fdt, offset, name, path) - return node diff --git a/tools/dtoc/fdt_select.py b/tools/dtoc/fdt_select.py index 54a3ef2e46..d6337ea227 100644 --- a/tools/dtoc/fdt_select.py +++ b/tools/dtoc/fdt_select.py @@ -6,13 +6,11 @@ # SPDX-License-Identifier: GPL-2.0+ #
-# Bring in either the normal fdt library (which relies on libfdt) or the -# fallback one (which uses fdtget and is slower). Both provide the same -# interface for this file to use. -import fdt_normal +# Bring in the normal fdt library (which relies on libfdt) +import fdt
def FdtScan(fname): """Returns a new Fdt object from the implementation we are using""" - dtb = fdt_normal.FdtNormal(fname) + dtb = fdt.Fdt(fname) dtb.Scan() return dtb
Since fdt is the name of a module, use a different name for variables to avoid a conflict.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/binman/control.py | 10 +++++----- tools/binman/etype/u_boot_dtb_with_ucode.py | 9 ++++----- tools/binman/func_test.py | 4 ++-- 3 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/tools/binman/control.py b/tools/binman/control.py index e90967807c..42d75efbcd 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -40,15 +40,15 @@ def _ReadImageDesc(binman_node): images['image'] = Image('image', binman_node) return images
-def _FindBinmanNode(fdt): +def _FindBinmanNode(dtb): """Find the 'binman' node in the device tree
Args: - fdt: Fdt object to scan + dtb: Fdt object to scan Returns: Node object of /binman node, or None if not found """ - for node in fdt.GetRoot().subnodes: + for node in dtb.GetRoot().subnodes: if node.name == 'binman': return node return None @@ -92,8 +92,8 @@ def Binman(options, args): try: tools.SetInputDirs(options.indir) tools.PrepareOutputDir(options.outdir, options.preserve) - fdt = fdt_select.FdtScan(dtb_fname) - node = _FindBinmanNode(fdt) + dtb = fdt.FdtScan(dtb_fname) + node = _FindBinmanNode(dtb) if not node: raise ValueError("Device tree '%s' does not have a 'binman' " "node" % dtb_fname) diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py index 95405c6473..01ee36fb0d 100644 --- a/tools/binman/etype/u_boot_dtb_with_ucode.py +++ b/tools/binman/etype/u_boot_dtb_with_ucode.py @@ -44,9 +44,8 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob): fd.write(self.data)
# Remove the microcode - fdt = fdt_select.FdtScan(fname) - fdt.Scan() - ucode = fdt.GetNode('/microcode') + dtb = fdt.FdtScan(fname) + ucode = dtb.GetNode('/microcode') if not ucode: raise self.Raise("No /microcode node found in '%s'" % fname)
@@ -64,8 +63,8 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob): self.ucode_offset = data_prop.GetOffset() + 12 self.ucode_size = len(data_prop.bytes) if self.collate: - fdt.Pack() - fdt.Flush() + dtb.Pack() + dtb.Flush()
# Make this file the contents of this entry self._pathname = fname diff --git a/tools/binman/func_test.py b/tools/binman/func_test.py index 7328d03b5c..8960e23f2c 100644 --- a/tools/binman/func_test.py +++ b/tools/binman/func_test.py @@ -658,8 +658,8 @@ class TestFunctional(unittest.TestCase): fname = tools.GetOutputFilename('test.dtb') with open(fname, 'wb') as fd: fd.write(second) - fdt = fdt_select.FdtScan(fname) - ucode = fdt.GetNode('/microcode') + dtb = fdt.FdtScan(fname) + ucode = dtb.GetNode('/microcode') self.assertTrue(ucode) for node in ucode.subnodes: self.assertFalse(node.props.get('data'))
This file was used to select between the normal and fallback libfdt implementations. Now that we only have one, it is not needed.
Drop it and fix up all users.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
tools/binman/control.py | 2 +- tools/binman/etype/u_boot_dtb_with_ucode.py | 2 +- tools/binman/fdt_test.py | 2 +- tools/binman/func_test.py | 2 +- tools/dtoc/dtoc.py | 3 +-- tools/dtoc/fdt.py | 10 ++++++++-- tools/dtoc/fdt_select.py | 16 ---------------- 7 files changed, 13 insertions(+), 24 deletions(-) delete mode 100644 tools/dtoc/fdt_select.py
diff --git a/tools/binman/control.py b/tools/binman/control.py index 42d75efbcd..e9d48df030 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -12,7 +12,7 @@ import sys import tools
import command -import fdt_select +import fdt import fdt_util from image import Image import tout diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py index 01ee36fb0d..a384a759c4 100644 --- a/tools/binman/etype/u_boot_dtb_with_ucode.py +++ b/tools/binman/etype/u_boot_dtb_with_ucode.py @@ -6,7 +6,7 @@ # Entry-type module for U-Boot device tree with the microcode removed #
-import fdt_select +import fdt from entry import Entry from blob import Entry_blob import tools diff --git a/tools/binman/fdt_test.py b/tools/binman/fdt_test.py index df2b0a6af7..249a9ea388 100644 --- a/tools/binman/fdt_test.py +++ b/tools/binman/fdt_test.py @@ -12,7 +12,7 @@ import tempfile import unittest
import fdt -from fdt_select import FdtScan +from fdt import FdtScan import fdt_util import tools
diff --git a/tools/binman/func_test.py b/tools/binman/func_test.py index 8960e23f2c..8b4db41659 100644 --- a/tools/binman/func_test.py +++ b/tools/binman/func_test.py @@ -21,7 +21,7 @@ import cmdline import command import control import entry -import fdt_select +import fdt import fdt_util import tools import tout diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py index 2e0b9c04e2..08e35f148c 100755 --- a/tools/dtoc/dtoc.py +++ b/tools/dtoc/dtoc.py @@ -17,7 +17,6 @@ our_path = os.path.dirname(os.path.realpath(__file__)) sys.path.append(os.path.join(our_path, '../patman'))
import fdt -import fdt_select import fdt_util
# When we see these properties we ignore them - i.e. do not create a structure member @@ -170,7 +169,7 @@ class DtbPlatdata: Once this is done, self.fdt.GetRoot() can be called to obtain the device tree root node, and progress from there. """ - self.fdt = fdt_select.FdtScan(self._dtb_fname) + self.fdt = fdt.FdtScan(self._dtb_fname)
def ScanNode(self, root): for node in root.subnodes: diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py index bff31d1c92..63a32ea2d7 100644 --- a/tools/dtoc/fdt.py +++ b/tools/dtoc/fdt.py @@ -14,8 +14,8 @@ import libfdt
# This deals with a device tree, presenting it as an assortment of Node and # Prop objects, representing nodes and properties, respectively. This file -# contains the base classes and defines the high-level API. See fdt_select.py -# for how to create an Fdt object. +# contains the base classes and defines the high-level API. You can use +# FdtScan() as a convenience function to create and scan an Fdt.
# This implementation uses a libfdt Python library to access the device tree, # so it is fairly efficient. @@ -400,3 +400,9 @@ class Fdt: """ node = Node(fdt, offset, name, path) return node + +def FdtScan(fname): + """Returns a new Fdt object from the implementation we are using""" + dtb = Fdt(fname) + dtb.Scan() + return dtb diff --git a/tools/dtoc/fdt_select.py b/tools/dtoc/fdt_select.py deleted file mode 100644 index d6337ea227..0000000000 --- a/tools/dtoc/fdt_select.py +++ /dev/null @@ -1,16 +0,0 @@ -#!/usr/bin/python -# -# Copyright (C) 2016 Google, Inc -# Written by Simon Glass sjg@chromium.org -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Bring in the normal fdt library (which relies on libfdt) -import fdt - -def FdtScan(fname): - """Returns a new Fdt object from the implementation we are using""" - dtb = fdt.Fdt(fname) - dtb.Scan() - return dtb
participants (1)
-
Simon Glass