[U-Boot] Please pull u-boot-atmel/master
Dear Albert Aribaud,
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to f3f68232e709a1108b631410087d526cc23dfb55:
AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-02 22:15:05 +0200)
---------------------------------------------------------------- Alexandre Belloni (1): AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann (1): ehci-atmel: fix compiler warning
Bo Shen (3): Atmel : usb : add EHCI driver for Atmel SoC AT91: at91sam9m10g45ek : Enable EHCI instead OHCI ATMEL/PIO: Enable new feature of PIO on Atmel device
esw@bus-elektronik.de (2): Fix: brocken boot message at serial line on AT91SAM9263-EK board Fix: AT91SAM9263 nor flash usage
arch/arm/include/asm/arch-at91/at91_pio.h | 45 ++++++++++- board/atmel/at91sam9260ek/partition.c | 6 +- board/atmel/at91sam9261ek/partition.c | 6 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +- board/atmel/at91sam9263ek/partition.c | 6 +- board/atmel/at91sam9rlek/partition.c | 6 +- drivers/gpio/at91_gpio.c | 125 ++++++++++++++++++++++++++++- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-atmel.c | 89 ++++++++++++++++++++ include/configs/at91sam9260ek.h | 5 +- include/configs/at91sam9261ek.h | 5 +- include/configs/at91sam9263ek.h | 10 ++- include/configs/at91sam9m10g45ek.h | 20 +---- include/configs/at91sam9rlek.h | 3 +- 14 files changed, 288 insertions(+), 41 deletions(-) create mode 100644 drivers/usb/host/ehci-atmel.c
Best regards
Andreas Bießmann
Hi Andreas,
On Tue, 3 Jul 2012 00:14:58 +0200, Andreas Bießmann andreas.devel@googlemail.com wrote:
Dear Albert Aribaud,
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to f3f68232e709a1108b631410087d526cc23dfb55:
AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-02 22:15:05 +0200)
Alexandre Belloni (1): AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann (1): ehci-atmel: fix compiler warning
Bo Shen (3): Atmel : usb : add EHCI driver for Atmel SoC AT91: at91sam9m10g45ek : Enable EHCI instead OHCI ATMEL/PIO: Enable new feature of PIO on Atmel device
esw@bus-elektronik.de (2): Fix: brocken boot message at serial line on AT91SAM9263-EK board Fix: AT91SAM9263 nor flash usage
Can you just fix the "brocken" typo above? (and then rebase to current arm/master, should be trivial, was on my side)
Best regards
Andreas Bießmann
Amicalement,
Hi Albert,
On 05.07.2012 10:35, Albert ARIBAUD wrote:
Hi Andreas,
On Tue, 3 Jul 2012 00:14:58 +0200, Andreas Bießmann andreas.devel@googlemail.com wrote:
Dear Albert Aribaud,
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to f3f68232e709a1108b631410087d526cc23dfb55:
AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-02 22:15:05 +0200)
Alexandre Belloni (1): AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann (1): ehci-atmel: fix compiler warning
Bo Shen (3): Atmel : usb : add EHCI driver for Atmel SoC AT91: at91sam9m10g45ek : Enable EHCI instead OHCI ATMEL/PIO: Enable new feature of PIO on Atmel device
esw@bus-elektronik.de (2): Fix: brocken boot message at serial line on AT91SAM9263-EK board Fix: AT91SAM9263 nor flash usage
Can you just fix the "brocken" typo above? (and then rebase to current arm/master, should be trivial, was on my side)
Will do ASAP.
Best regards
Andreas Bießmann
Hi Albert,
On Thu, 5 Jul 2012 10:35:59 +0200, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
Hi Andreas,
On Tue, 3 Jul 2012 00:14:58 +0200, Andreas Bießmann andreas.devel@googlemail.com wrote:
Dear Albert Aribaud,
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to f3f68232e709a1108b631410087d526cc23dfb55:
AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-02 22:15:05 +0200)
Alexandre Belloni (1): AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann (1): ehci-atmel: fix compiler warning
Bo Shen (3): Atmel : usb : add EHCI driver for Atmel SoC AT91: at91sam9m10g45ek : Enable EHCI instead OHCI ATMEL/PIO: Enable new feature of PIO on Atmel device
esw@bus-elektronik.de (2): Fix: brocken boot message at serial line on AT91SAM9263-EK board Fix: AT91SAM9263 nor flash usage
Can you just fix the "brocken" typo above? (and then rebase to current arm/master, should be trivial, was on my side)
Please hold on: I had a misconfigured e-mail in my new git setup, so my current u-boot-arm tree is not ueasble. I'll send out a notice when the tree is fixed.
Amicalement,
Hi Albert,
On Thu, 5 Jul 2012 11:36:55 +0200, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
Hi Albert,
On Thu, 5 Jul 2012 10:35:59 +0200, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
Hi Andreas,
On Tue, 3 Jul 2012 00:14:58 +0200, Andreas Bießmann andreas.devel@googlemail.com wrote:
Dear Albert Aribaud,
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to f3f68232e709a1108b631410087d526cc23dfb55:
AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-02 22:15:05 +0200)
Alexandre Belloni (1): AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann (1): ehci-atmel: fix compiler warning
Bo Shen (3): Atmel : usb : add EHCI driver for Atmel SoC AT91: at91sam9m10g45ek : Enable EHCI instead OHCI ATMEL/PIO: Enable new feature of PIO on Atmel device
esw@bus-elektronik.de (2): Fix: brocken boot message at serial line on AT91SAM9263-EK board Fix: AT91SAM9263 nor flash usage
Can you just fix the "brocken" typo above? (and then rebase to current arm/master, should be trivial, was on my side)
Please hold on: I had a misconfigured e-mail in my new git setup, so my current u-boot-arm tree is not ueasble. I'll send out a notice when the tree is fixed.
Luckily, I had not pushed any change with the wrong e-mail address on the official ARM tree, so all is fine. Please proceed with fixing and rebasing.
Amicalement,
participants (2)
-
Albert ARIBAUD -
Andreas Bießmann