Hello Everyone,

I m trying to boot linux on a virtual platform . I was hoping to get a little help from this forum .

The Platform is basic comprising of : (everything is in a simulated form) 1. Reset Generator 2. Clock Generator 3. ARM-Processor Core - 926EJ-S 4. TCM stubs (Tightly Coupled Memory) for processor 5. Interrupt-Controller 6. BUS (OCP-PSP) for interface 7. Memory (SSRAM, SDRAM, FLASH) 8. UART

The Boot-Loader i m using is DAS U-BOOT 1.1.6 Linux version is 2.6.20.3

The problem i m facing is the configuration of u-boot image as well as the kernel image . The configuration is done according to a board which i m not using i.e Versatile, mine is a virtual platform and while configuring i had to specify a board (which i gave as Versatile), now the problem is that the image produced is according to Versatile and thus it's looking for hardware which is not present on my platform (i.e memory address fault occurs) . Thus what i would like to know is, how to configure the u-boot if i m not using a known board, i.e if i m using a custom made board, what should be done ? I would really be grateful .

Thanks a lot in advance .

Best Regards, Chinmay Upadhyaya