Add the QorIQ DPAA Frame Manager v3 device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com --- arch/arm/dts/qoriq-fman3-0-10g-0.dtsi | 44 +++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-10g-1.dtsi | 44 +++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-1g-0.dtsi | 43 ++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-1g-1.dtsi | 43 ++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-1g-2.dtsi | 43 ++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-1g-3.dtsi | 43 ++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-1g-4.dtsi | 43 ++++++++++++++++++ arch/arm/dts/qoriq-fman3-0-1g-5.dtsi | 43 ++++++++++++++++++ arch/arm/dts/qoriq-fman3-0.dtsi | 82 +++++++++++++++++++++++++++++++++++ 9 files changed, 428 insertions(+) create mode 100644 arch/arm/dts/qoriq-fman3-0-10g-0.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-10g-1.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-0.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-1.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-2.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-3.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-4.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0-1g-5.dtsi create mode 100644 arch/arm/dts/qoriq-fman3-0.dtsi

diff --git a/arch/arm/dts/qoriq-fman3-0-10g-0.dtsi b/arch/arm/dts/qoriq-fman3-0-10g-0.dtsi new file mode 100644 index 0000000..8f4776e --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-10g-0.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 10g port #0 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + pcsphy-handle = <&pcsphy6>; + status = "disabled"; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-10g-1.dtsi b/arch/arm/dts/qoriq-fman3-0-10g-1.dtsi new file mode 100644 index 0000000..b5eb22f --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-10g-1.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 10g port #1 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; + pcsphy-handle = <&pcsphy7>; + status = "disabled"; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + + pcsphy7: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-1g-0.dtsi b/arch/arm/dts/qoriq-fman3-0-1g-0.dtsi new file mode 100644 index 0000000..4264d47 --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-1g-0.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 1g port #0 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>; + status = "disabled"; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-1g-1.dtsi b/arch/arm/dts/qoriq-fman3-0-1g-1.dtsi new file mode 100644 index 0000000..d60f8c7 --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-1g-1.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 1g port #1 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>; + status = "disabled"; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-1g-2.dtsi b/arch/arm/dts/qoriq-fman3-0-1g-2.dtsi new file mode 100644 index 0000000..7c5edc0 --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-1g-2.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 1g port #2 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy2>; + status = "disabled"; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + + pcsphy2: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-1g-3.dtsi b/arch/arm/dts/qoriq-fman3-0-1g-3.dtsi new file mode 100644 index 0000000..2d2de58 --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-1g-3.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 1g port #3 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy3>; + status = "disabled"; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + + pcsphy3: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-1g-4.dtsi b/arch/arm/dts/qoriq-fman3-0-1g-4.dtsi new file mode 100644 index 0000000..f5a73dc --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-1g-4.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 1g port #4 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy4>; + status = "disabled"; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + + pcsphy4: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0-1g-5.dtsi b/arch/arm/dts/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 0000000..baa5751 --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 1g port #5 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman@1a00000 { + fman0_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman0_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy5>; + status = "disabled"; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + + pcsphy5: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/qoriq-fman3-0.dtsi b/arch/arm/dts/qoriq-fman3-0.dtsi new file mode 100644 index 0000000..82fe796 --- /dev/null +++ b/arch/arm/dts/qoriq-fman3-0.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * QorIQ FMan v3 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP + * + */ + +fman0: fman@1a00000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0x0 0x0 0x1a00000 0xfe000>; + reg = <0x0 0x1a00000 0x0 0xfe000>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + ptimer-handle = <&ptp_timer0>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; +}; + +ptp_timer0: ptp-timer@1afe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x0 0x1afe000 0x0 0x1000>; + clocks = <&clockgen 3 0>; +};

Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1043ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com --- arch/arm/dts/fsl-ls1043a-rdb.dts | 81 ++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/fsl-ls1043a.dtsi | 2 +- 2 files changed, 82 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/fsl-ls1043a-rdb.dts b/arch/arm/dts/fsl-ls1043a-rdb.dts index 721b158..6e4ea5b 100644 --- a/arch/arm/dts/fsl-ls1043a-rdb.dts +++ b/arch/arm/dts/fsl-ls1043a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright (C) 2015, Freescale Semiconductor + * Copyright 2020 NXP * * Mingkai Hu Mingkai.hu@freescale.com */ @@ -98,3 +99,83 @@ &duart1 { status = "okay"; }; + +#include "fsl-ls1043-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + status = "okay"; + }; + + ethernet@e2000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + status = "okay"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-txid"; + status = "okay"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-txid"; + status = "okay"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + status = "okay"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + status = "okay"; + }; + + ethernet@f0000 { /* 10GEC1 */ + phy-handle = <&aqr105_phy>; + phy-connection-type = "xgmii"; + status = "okay"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + qsgmii_phy1: ethernet-phy@4 { + reg = <0x4>; + }; + + qsgmii_phy2: ethernet-phy@5 { + reg = <0x5>; + }; + + qsgmii_phy3: ethernet-phy@6 { + reg = <0x6>; + }; + + qsgmii_phy4: ethernet-phy@7 { + reg = <0x7>; + }; + }; + + mdio@fd000 { + aqr105_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 132 4>; + reg = <0x1>; + }; + }; +}; diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi index b159c3c..0a959f0 100644 --- a/arch/arm/dts/fsl-ls1043a.dtsi +++ b/arch/arm/dts/fsl-ls1043a.dtsi @@ -31,7 +31,7 @@ interrupts = <1 9 0xf08>; };

- soc { + soc: soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;

Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1046ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com --- arch/arm/dts/fsl-ls1046a-rdb.dts | 67 ++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/fsl-ls1046a.dtsi | 2 +- 2 files changed, 68 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts index 83e34ab..cac65a7 100644 --- a/arch/arm/dts/fsl-ls1046a-rdb.dts +++ b/arch/arm/dts/fsl-ls1046a-rdb.dts @@ -3,6 +3,7 @@ * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016, Freescale Semiconductor + * Copyright 2020 NXP * * Mingkai Hu Mingkai.hu@freescale.com */ @@ -51,3 +52,69 @@ &i2c3 { status = "okay"; }; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; + status = "okay"; + }; + + ethernet@e8000 { + phy-handle = <&sgmii_phy1>; + phy-connection-type = "sgmii"; + status = "okay"; + }; + + ethernet@ea000 { + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; + }; + + ethernet@f0000 { /* 10GEC1 */ + phy-handle = <&aqr106_phy>; + phy-connection-type = "xgmii"; + status = "okay"; + }; + + ethernet@f2000 { /* 10GEC2 */ + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "xgmii"; + status = "okay"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmii_phy1: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmii_phy2: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + mdio@fd000 { + aqr106_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 131 4>; + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi index fdf93fd..4e91d5c 100644 --- a/arch/arm/dts/fsl-ls1046a.dtsi +++ b/arch/arm/dts/fsl-ls1046a.dtsi @@ -31,7 +31,7 @@ interrupts = <1 9 0xf08>; };

- soc { + soc: soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;

Move the receive buffer free code in a separate function.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com --- drivers/net/fm/eth.c | 63 ++++++++++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 26 deletions(-)

diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 57db2e9..7d13736 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -567,20 +567,46 @@ static int fm_eth_send(struct eth_device *dev, void *buf, int len) return 1; }

-static int fm_eth_recv(struct eth_device *dev) +static struct fm_port_bd *fm_eth_free_one(struct fm_eth *fm_eth, + struct fm_port_bd *rxbd) { - struct fm_eth *fm_eth; struct fm_port_global_pram *pram; - struct fm_port_bd *rxbd, *rxbd_base; - u16 status, len; - u32 buf_lo, buf_hi; - u8 *data; + struct fm_port_bd *rxbd_base; u16 offset_out; - int ret = 1;

- fm_eth = (struct fm_eth *)dev->priv; pram = fm_eth->rx_pram; - rxbd = fm_eth->cur_rxbd; + + /* clear the RxBDs */ + muram_writew(&rxbd->status, RxBD_EMPTY); + muram_writew(&rxbd->len, 0); + sync(); + + /* advance RxBD */ + rxbd++; + rxbd_base = (struct fm_port_bd *)fm_eth->rx_bd_ring; + if (rxbd >= (rxbd_base + RX_BD_RING_SIZE)) + rxbd = rxbd_base; + + /* update RxQD */ + offset_out = muram_readw(&pram->rxqd.offset_out); + offset_out += sizeof(struct fm_port_bd); + if (offset_out >= muram_readw(&pram->rxqd.bd_ring_size)) + offset_out = 0; + muram_writew(&pram->rxqd.offset_out, offset_out); + sync(); + + return rxbd; +} + +static int fm_eth_recv(struct eth_device *dev) +{ + struct fm_eth *fm_eth = (struct fm_eth *)dev->priv; + struct fm_port_bd *rxbd = fm_eth->cur_rxbd; + u32 buf_lo, buf_hi; + u16 status, len; + int ret = -1; + u8 *data; + status = muram_readw(&rxbd->status);

while (!(status & RxBD_EMPTY)) { @@ -595,26 +621,11 @@ static int fm_eth_recv(struct eth_device *dev) ret = 0; }

- /* clear the RxBDs */ - muram_writew(&rxbd->status, RxBD_EMPTY); - muram_writew(&rxbd->len, 0); - sync(); + /* free current bd, advance to next one */ + rxbd = fm_eth_free_one(fm_eth, rxbd);

- /* advance RxBD */ - rxbd++; - rxbd_base = (struct fm_port_bd *)fm_eth->rx_bd_ring; - if (rxbd >= (rxbd_base + RX_BD_RING_SIZE)) - rxbd = rxbd_base; /* read next status */ status = muram_readw(&rxbd->status); - - /* update RxQD */ - offset_out = muram_readw(&pram->rxqd.offset_out); - offset_out += sizeof(struct fm_port_bd); - if (offset_out >= muram_readw(&pram->rxqd.bd_ring_size)) - offset_out = 0; - muram_writew(&pram->rxqd.offset_out, offset_out); - sync(); } fm_eth->cur_rxbd = (void *)rxbd;

Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 + board/freescale/ls1043ardb/ls1043ardb.c | 2 + board/freescale/ls1046afrwy/ls1046afrwy.c | 2 + board/freescale/ls1046aqds/ls1046aqds.c | 2 + board/freescale/ls1046ardb/ls1046ardb.c | 2 + drivers/net/fm/eth.c | 351 +++++++++++++++++++++++++++++- drivers/net/fm/fm.c | 80 +++++++ drivers/net/fm/fm.h | 23 ++ drivers/net/fm/init.c | 2 + drivers/net/fm/memac.c | 1 + include/fsl_mdio.h | 1 + 11 files changed, 458 insertions(+), 10 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index b443894..e0f8a50 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1156,8 +1156,10 @@ int arch_early_init_r(void) fsl_rgmii_init(); #endif #ifdef CONFIG_FMAN_ENET +#ifndef CONFIG_DM_ETH fman_enet_init(); #endif +#endif #ifdef CONFIG_SYS_DPAA_QBMAN setup_qbman_portals(); #endif diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 9bc78d6..26a1929 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -285,8 +285,10 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd);

#ifdef CONFIG_SYS_DPAA_FMAN +#ifndef CONFIG_DM_ETH fdt_fixup_fman_ethernet(blob); #endif +#endif

fdt_fixup_icid(blob);

diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c index 8c0abb6..71ace19 100644 --- a/board/freescale/ls1046afrwy/ls1046afrwy.c +++ b/board/freescale/ls1046afrwy/ls1046afrwy.c @@ -232,8 +232,10 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd);

#ifdef CONFIG_SYS_DPAA_FMAN +#ifndef CONFIG_DM_ETH fdt_fixup_fman_ethernet(blob); #endif +#endif

fdt_fixup_icid(blob);

diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index cabd7ee..e6648e9 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -462,7 +462,9 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd);

#ifdef CONFIG_SYS_DPAA_FMAN +#ifndef CONFIG_DM_ETH fdt_fixup_fman_ethernet(blob); +#endif fdt_fixup_board_enet(blob); #endif

diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index cc6bd88..5308cb2 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -172,8 +172,10 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd);

#ifdef CONFIG_SYS_DPAA_FMAN +#ifndef CONFIG_DM_ETH fdt_fixup_fman_ethernet(blob); #endif +#endif

fdt_fixup_icid(blob);

diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 7d13736..5f1a023 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -1,10 +1,17 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2009-2012 Freescale Semiconductor, Inc. + * Copyright 2020 NXP * Dave Liu daveliu@freescale.com */ #include <common.h> #include <asm/io.h> +#ifdef CONFIG_DM_ETH +#include <dm.h> +#include <dm/ofnode.h> +#include <linux/compat.h> +#include <phy_interface.h> +#endif #include <malloc.h> #include <net.h> #include <hwconfig.h> @@ -18,8 +25,10 @@

#include "fm.h"

+#ifndef CONFIG_DM_ETH static struct eth_device *devlist[NUM_FM_PORTS]; static int num_controllers; +#endif

#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)

@@ -37,10 +46,18 @@ static void dtsec_configure_serdes(struct fm_eth *priv) #ifdef CONFIG_SYS_FMAN_V3 u32 value; struct mii_dev bus; - bus.priv = priv->mac->phyregs; bool sgmii_2500 = (priv->enet_if == PHY_INTERFACE_MODE_SGMII_2500) ? true : false; - int i = 0; + int i = 0, j; + +#ifndef CONFIG_DM_ETH + bus.priv = priv->mac->phyregs; +#else + bus.priv = priv->pcs_mdio; +#endif + bus.read = memac_mdio_read; + bus.write = memac_mdio_write; + bus.reset = memac_mdio_reset;

qsgmii_loop: /* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */ @@ -51,6 +68,10 @@ qsgmii_loop: else value = PHY_SGMII_IF_MODE_SGMII | PHY_SGMII_IF_MODE_AN;

+ for (j = 0; j <= 3; j++) + debug("dump PCS reg %#x: %#x\n", j, + memac_mdio_read(&bus, i, MDIO_DEVAD_NONE, j)); + memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x14, value);

/* Dev ability according to SGMII specification */ @@ -113,6 +134,7 @@ static void dtsec_init_phy(struct fm_eth *fm_eth) dtsec_configure_serdes(fm_eth); }

+#ifndef CONFIG_DM_ETH #ifdef CONFIG_PHYLIB static int tgec_is_fibre(struct fm_eth *fm) { @@ -123,6 +145,7 @@ static int tgec_is_fibre(struct fm_eth *fm) return hwconfig_arg_cmp(phyopt, "xfi"); } #endif +#endif /* CONFIG_DM_ETH */ #endif

static u16 muram_readw(u16 *addr) @@ -166,6 +189,8 @@ static void bmi_rx_port_disable(struct fm_bmi_rx_port *rx_port) /* wait until the rx port is not busy */ while ((in_be32(&rx_port->fmbm_rst) & FMBM_RST_BSY) && timeout--) ; + if (!timeout) + printf("%s - timeout\n", __func__); }

static void bmi_rx_port_init(struct fm_bmi_rx_port *rx_port) @@ -194,6 +219,8 @@ static void bmi_tx_port_disable(struct fm_bmi_tx_port *tx_port) /* wait until the tx port is not busy */ while ((in_be32(&tx_port->fmbm_tst) & FMBM_TST_BSY) && timeout--) ; + if (!timeout) + printf("%s - timeout\n", __func__); }

static void bmi_tx_port_init(struct fm_bmi_tx_port *tx_port) @@ -433,23 +460,39 @@ static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth) sync(); }

+#ifndef CONFIG_DM_ETH static int fm_eth_open(struct eth_device *dev, bd_t *bd) +#else +static int fm_eth_open(struct udevice *dev) +#endif { - struct fm_eth *fm_eth; +#ifndef CONFIG_DM_ETH + struct fm_eth *fm_eth = dev->priv; +#else + struct eth_pdata *pdata = dev_get_platdata(dev); + struct fm_eth *fm_eth = dev_get_priv(dev); +#endif + unsigned char *enetaddr; struct fsl_enet_mac *mac; #ifdef CONFIG_PHYLIB int ret; #endif

- fm_eth = (struct fm_eth *)dev->priv; mac = fm_eth->mac;

+#ifndef CONFIG_DM_ETH + enetaddr = &dev->enetaddr[0]; +#else + enetaddr = pdata->enetaddr; +#endif + /* setup the MAC address */ - if (dev->enetaddr[0] & 0x01) { - printf("%s: MacAddress is multcast address\n", __func__); - return 1; + if (enetaddr[0] & 0x01) { + printf("%s: MacAddress is multicast address\n", __func__); + enetaddr[0] = 0; + enetaddr[5] = fm_eth->num; } - mac->set_mac_addr(mac, dev->enetaddr); + mac->set_mac_addr(mac, enetaddr);

/* enable bmi Rx port */ setbits_be32(&fm_eth->rx_port->fmbm_rcfg, FMBM_RCFG_EN); @@ -464,8 +507,12 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd) if (fm_eth->phydev) { ret = phy_startup(fm_eth->phydev); if (ret) { +#ifndef CONFIG_DM_ETH printf("%s: Could not initialize\n", fm_eth->phydev->dev->name); +#else + printf("%s: Could not initialize\n", dev->name); +#endif return ret; } } else { @@ -479,6 +526,8 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd)

/* set the MAC-PHY mode */ mac->set_if_mode(mac, fm_eth->enet_if, fm_eth->phydev->speed); + debug("MAC IF mode %d, speed %d, link %d\n", fm_eth->enet_if, + fm_eth->phydev->speed, fm_eth->phydev->link);

if (!fm_eth->phydev->link) printf("%s: No link.\n", fm_eth->phydev->dev->name); @@ -486,7 +535,11 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd) return fm_eth->phydev->link ? 0 : -1; }

+#ifndef CONFIG_DM_ETH static void fm_eth_halt(struct eth_device *dev) +#else +static void fm_eth_halt(struct udevice *dev) +#endif { struct fm_eth *fm_eth; struct fsl_enet_mac *mac; @@ -509,7 +562,11 @@ static void fm_eth_halt(struct eth_device *dev) #endif }

+#ifndef CONFIG_DM_ETH static int fm_eth_send(struct eth_device *dev, void *buf, int len) +#else +static int fm_eth_send(struct udevice *dev, void *buf, int len) +#endif { struct fm_eth *fm_eth; struct fm_port_global_pram *pram; @@ -598,7 +655,11 @@ static struct fm_port_bd *fm_eth_free_one(struct fm_eth *fm_eth, return rxbd; }

+#ifndef CONFIG_DM_ETH static int fm_eth_recv(struct eth_device *dev) +#else +static int fm_eth_recv(struct udevice *dev, int flags, uchar **packetp) +#endif { struct fm_eth *fm_eth = (struct fm_eth *)dev->priv; struct fm_port_bd *rxbd = fm_eth->cur_rxbd; @@ -615,7 +676,12 @@ static int fm_eth_recv(struct eth_device *dev) buf_lo = in_be32(&rxbd->buf_ptr_lo); data = (u8 *)((ulong)(buf_hi << 16) << 16 | buf_lo); len = muram_readw(&rxbd->len); +#ifndef CONFIG_DM_ETH net_process_received_packet(data, len); +#else + *packetp = data; + return len; +#endif } else { printf("%s: Rx error\n", dev->name); ret = 0; @@ -632,6 +698,18 @@ static int fm_eth_recv(struct eth_device *dev) return ret; }

+#ifdef CONFIG_DM_ETH +static int fm_eth_free_pkt(struct udevice *dev, uchar *packet, int length) +{ + struct fm_eth *fm_eth = (struct fm_eth *)dev->priv; + + fm_eth->cur_rxbd = fm_eth_free_one(fm_eth, fm_eth->cur_rxbd); + + return 0; +} +#endif /* CONFIG_DM_ETH */ + +#ifndef CONFIG_DM_ETH static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) { struct fsl_enet_mac *mac; @@ -687,17 +765,71 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)

return 0; } +#else /* CONFIG_DM_ETH */ +static int fm_eth_init_mac(struct fm_eth *fm_eth, void *reg) +{ +#ifndef CONFIG_SYS_FMAN_V3 + void *mdio; +#endif + + fm_eth->mac = kzalloc(sizeof(*fm_eth->mac), GFP_KERNEL); + if (!fm_eth->mac) + return -ENOMEM; + +#ifndef CONFIG_SYS_FMAN_V3 + mdio = fman_mdio(fm_eth->dev->parent, fm_eth->mac_type, fm_eth->num); + debug("MDIO %d @ %p\n", fm_eth->num, mdio); +#endif + + switch (fm_eth->mac_type) { +#ifdef CONFIG_SYS_FMAN_V3 + case FM_MEMAC: + init_memac(fm_eth->mac, reg, NULL, MAX_RXBUF_LEN); + break; +#else + case FM_DTSEC: + init_dtsec(fm_eth->mac, reg, mdio, MAX_RXBUF_LEN); + break; + case FM_TGEC: + init_tgec(fm_eth->mac, reg, mdio, MAX_RXBUF_LEN); + break; +#endif + } + + return 0; +} +#endif /* CONFIG_DM_ETH */

static int init_phy(struct fm_eth *fm_eth) { #ifdef CONFIG_PHYLIB + u32 supported = PHY_GBIT_FEATURES; +#ifndef CONFIG_DM_ETH struct phy_device *phydev = NULL; - u32 supported; +#endif + + if (fm_eth->type == FM_ETH_10G_E) + supported = PHY_10G_FEATURES; + if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII_2500) + supported |= SUPPORTED_2500baseX_Full; #endif

if (fm_eth->type == FM_ETH_1G_E) dtsec_init_phy(fm_eth);

+#ifdef CONFIG_DM_ETH +#ifdef CONFIG_PHYLIB +#ifdef CONFIG_DM_MDIO + fm_eth->phydev = dm_eth_phy_connect(fm_eth->dev); + if (!fm_eth->phydev) + return -ENODEV; +#endif + fm_eth->phydev->advertising &= supported; + fm_eth->phydev->supported &= supported; + + phy_config(fm_eth->phydev); +#endif +#else /* CONFIG_DM_ETH */ #ifdef CONFIG_PHYLIB if (fm_eth->bus) { phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, fm_eth->dev, @@ -730,10 +862,11 @@ static int init_phy(struct fm_eth *fm_eth)

phy_config(phydev); #endif - +#endif /* CONFIG_DM_ETH */ return 0; }

+#ifndef CONFIG_DM_ETH int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info) { struct eth_device *dev; @@ -801,3 +934,201 @@ int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info)

return 0; } +#else /* CONFIG_DM_ETH */ +#ifdef CONFIG_PHYLIB +phy_interface_t fman_read_sys_if(struct udevice *dev) +{ + const char *if_str; + + if_str = ofnode_read_string(dev->node, "phy-connection-type"); + debug("MAC system interface mode %s\n", if_str); + + return phy_get_interface_by_name(if_str); +} +#endif + +static int fm_eth_bind(struct udevice *dev) +{ + char mac_name[11]; + u32 fm, num; + + if (ofnode_read_u32(ofnode_get_parent(dev->node), "cell-index", &fm)) { + printf("FMan node property cell-index missing\n"); + return -EINVAL; + } + + if (dev && dev_read_u32(dev, "cell-index", &num)) { + printf("FMan MAC node property cell-index missing\n"); + return -EINVAL; + } + + sprintf(mac_name, "fm%d-mac%d", fm + 1, num + 1); + device_set_name(dev, mac_name); + + debug("%s - binding %s\n", __func__, mac_name); + + return 0; +} + +static struct udevice *fm_get_internal_mdio(struct udevice *dev) +{ + struct ofnode_phandle_args phandle = {.node = ofnode_null()}; + struct udevice *mdiodev; + + if (dev_read_phandle_with_args(dev, "pcsphy-handle", NULL, + 0, 0, &phandle) || + !ofnode_valid(phandle.node)) { + if (dev_read_phandle_with_args(dev, "tbi-handle", NULL, + 0, 0, &phandle) || + !ofnode_valid(phandle.node)) { + printf("Issue reading pcsphy-handle/tbi-handle for MAC %s\n", + dev->name); + return NULL; + } + } + + if (uclass_get_device_by_ofnode(UCLASS_MDIO, + ofnode_get_parent(phandle.node), + &mdiodev)) { + printf("can't find MDIO bus for node %s\n", + ofnode_get_name(ofnode_get_parent(phandle.node))); + return NULL; + } + debug("Found internal MDIO bus %p\n", mdiodev); + + return mdiodev; +} + +static int fm_eth_probe(struct udevice *dev) +{ + struct fm_eth *fm_eth = (struct fm_eth *)dev->priv; + struct ofnode_phandle_args args; + void *reg; + int ret, index; + + debug("%s enter for dev %p fm_eth %p - %s\n", __func__, dev, fm_eth, + (dev) ? dev->name : "-"); + + if (fm_eth->dev) { + printf("%s already probed, exit\n", (dev) ? dev->name : "-"); + return 0; + } + + fm_eth->dev = dev; + fm_eth->fm_index = fman_id(dev->parent); + reg = (void *)(uintptr_t)dev_read_addr(dev); + fm_eth->mac_type = dev_get_driver_data(dev); +#ifdef CONFIG_PHYLIB + fm_eth->enet_if = fman_read_sys_if(dev); +#else + fm_eth->enet_if = PHY_INTERFACE_MODE_SGMII; + printf("%s: warning - unable to determine interface type\n", __func__); +#endif + switch (fm_eth->mac_type) { +#ifndef CONFIG_SYS_FMAN_V3 + case FM_TGEC: + fm_eth->type = FM_ETH_10G_E; + break; + case FM_DTSEC: +#else + case FM_MEMAC: + /* default to 1G, 10G is indicated by port property in dts */ +#endif + fm_eth->type = FM_ETH_1G_E; + break; + } + + if (dev_read_u32(dev, "cell-index", &fm_eth->num)) { + printf("FMan MAC node property cell-index missing\n"); + return -EINVAL; + } + + if (dev_read_phandle_with_args(dev, "fsl,fman-ports", NULL, + 0, 0, &args)) + goto ports_ref_failure; + index = ofnode_read_u32_default(args.node, "cell-index", 0); + if (index <= 0) + goto ports_ref_failure; + fm_eth->rx_port = fman_port(dev->parent, index); + + if (ofnode_read_bool(args.node, "fsl,fman-10g-port")) + fm_eth->type = FM_ETH_10G_E; + + if (dev_read_phandle_with_args(dev, "fsl,fman-ports", NULL, + 0, 1, &args)) + goto ports_ref_failure; + index = ofnode_read_u32_default(args.node, "cell-index", 0); + if (index <= 0) + goto ports_ref_failure; + fm_eth->tx_port = fman_port(dev->parent, index); + + /* set the ethernet max receive length */ + fm_eth->max_rx_len = MAX_RXBUF_LEN; + + switch (fm_eth->enet_if) { + case PHY_INTERFACE_MODE_QSGMII: + /* all PCS blocks are accessed on one controller */ + if (fm_eth->num != 0) + break; + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_SGMII_2500: + fm_eth->pcs_mdio = fm_get_internal_mdio(dev); + break; + default: + break; + } + + /* init global mac structure */ + ret = fm_eth_init_mac(fm_eth, reg); + if (ret) + return ret; + + /* startup the FM im */ + ret = fm_eth_startup(fm_eth); + + if (!ret) + ret = init_phy(fm_eth); + + return ret; + +ports_ref_failure: + printf("Issue reading fsl,fman-ports for MAC %s\n", dev->name); + return -ENOENT; +} + +static int fm_eth_remove(struct udevice *dev) +{ + return 0; +} + +static const struct eth_ops fm_eth_ops = { + .start = fm_eth_open, + .send = fm_eth_send, + .recv = fm_eth_recv, + .free_pkt = fm_eth_free_pkt, + .stop = fm_eth_halt, +}; + +static const struct udevice_id fm_eth_ids[] = { +#ifdef CONFIG_SYS_FMAN_V3 + { .compatible = "fsl,fman-memac", .data = FM_MEMAC }, +#else + { .compatible = "fsl,fman-dtsec", .data = FM_DTSEC }, + { .compatible = "fsl,fman-xgec", .data = FM_TGEC }, +#endif + {} +}; + +U_BOOT_DRIVER(eth_fman) = { + .name = "eth_fman", + .id = UCLASS_ETH, + .of_match = fm_eth_ids, + .bind = fm_eth_bind, + .probe = fm_eth_probe, + .remove = fm_eth_remove, + .ops = &fm_eth_ops, + .priv_auto_alloc_size = sizeof(struct fm_eth), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; +#endif /* CONFIG_DM_ETH */ diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 926cf81..bf8d3d0 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -9,6 +9,9 @@ #include <asm/io.h> #include <linux/errno.h> #include <u-boot/crc.h> +#ifdef CONFIG_DM_ETH +#include <dm.h> +#endif

#include "fm.h" #include <fsl_qe.h> /* For struct qe_firmware */ @@ -527,3 +530,80 @@ int fm_init_common(int index, struct ccsr_fman *reg) return fm_init_bmi(index, &reg->fm_bmi_common); } #endif + +#ifdef CONFIG_DM_ETH +struct fman_priv { + struct ccsr_fman *reg; + unsigned int fman_id; +}; + +static const struct udevice_id fman_ids[] = { + { .compatible = "fsl,fman" }, + {} +}; + +static int fman_probe(struct udevice *dev) +{ + struct fman_priv *priv = dev_get_priv(dev); + + priv->reg = (struct ccsr_fman *)(uintptr_t)dev_read_addr(dev); + + if (dev_read_u32(dev, "cell-index", &priv->fman_id)) { + printf("FMan node property cell-index missing\n"); + return -EINVAL; + } + + return fm_init_common(priv->fman_id, priv->reg); +} + +static int fman_remove(struct udevice *dev) +{ + return 0; +} + +int fman_id(struct udevice *dev) +{ + struct fman_priv *priv = dev_get_priv(dev); + + return priv->fman_id; +} + +void *fman_port(struct udevice *dev, int num) +{ + struct fman_priv *priv = dev_get_priv(dev); + + return &priv->reg->port[num - 1].fm_bmi; +} + +void *fman_mdio(struct udevice *dev, enum fm_mac_type type, int num) +{ + struct fman_priv *priv = dev_get_priv(dev); + void *res = NULL; + + switch (type) { +#ifdef CONFIG_SYS_FMAN_V3 + case FM_MEMAC: + res = &priv->reg->memac[num].fm_memac_mdio; + break; +#else + case FM_DTSEC: + res = &priv->reg->mac_1g[num].fm_mdio.miimcfg; + break; + case FM_TGEC: + res = &priv->reg->mac_10g[num].fm_10gec_mdio; + break; +#endif + } + return res; +} + +U_BOOT_DRIVER(fman) = { + .name = "fman", + .id = UCLASS_SIMPLE_BUS, + .of_match = fman_ids, + .probe = fman_probe, + .remove = fman_remove, + .priv_auto_alloc_size = sizeof(struct fman_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; +#endif /* CONFIG_DM_ETH */ diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h index e5deaf5..2379b3a 100644 --- a/drivers/net/fm/fm.h +++ b/drivers/net/fm/fm.h @@ -57,6 +57,18 @@ struct fm_port_bd { #define TxBD_READY 0x8000 #define TxBD_LAST BD_LAST

+#ifdef CONFIG_DM_ETH +enum fm_mac_type { +#ifdef CONFIG_SYS_FMAN_V3 + FM_MEMAC, +#else + FM_DTSEC, + FM_TGEC, +#endif +}; +#endif + +/* Fman ethernet private struct */ /* Rx/Tx queue descriptor */ struct fm_port_qd { u16 gen; @@ -101,6 +113,11 @@ int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info); phy_interface_t fman_port_enet_if(enum fm_port port); void fman_disable_port(enum fm_port port); void fman_enable_port(enum fm_port port); +int fman_id(struct udevice *dev); +void *fman_port(struct udevice *dev, int num); +#ifdef CONFIG_DM_ETH +void *fman_mdio(struct udevice *dev, enum fm_mac_type type, int num); +#endif

struct fsl_enet_mac { void *base; /* MAC controller registers base address */ @@ -126,7 +143,13 @@ struct fm_eth { struct mii_dev *bus; struct phy_device *phydev; int phyaddr; +#ifndef CONFIG_DM_ETH struct eth_device *dev; +#else + enum fm_mac_type mac_type; + struct udevice *dev; + struct udevice *pcs_mdio; +#endif int max_rx_len; struct fm_port_global_pram *rx_pram; /* Rx parameter table */ struct fm_port_global_pram *tx_pram; /* Tx parameter table */ diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index f896e80..8669d21 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -15,6 +15,7 @@

#include "fm.h"

+#ifndef CONFIG_DM_ETH struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_DTSEC >= 1) FM_DTSEC_INFO_INITIALIZER(1, 1), @@ -380,3 +381,4 @@ int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,

return 0; } +#endif /* CONFIG_DM_ETH */ diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c index bed8f14..77ea083 100644 --- a/drivers/net/fm/memac.c +++ b/drivers/net/fm/memac.c @@ -137,6 +137,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs, int max_rx_len) { + debug("%s: @ %p, mdio @ %p\n", __func__, base, phyregs); mac->base = base; mac->phyregs = phyregs; mac->max_rx_len = max_rx_len; diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index b87346c..8857d50 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -53,6 +53,7 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, int regnum, u16 value); int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, int regnum); +int memac_mdio_reset(struct mii_dev *bus);

struct fsl_pq_mdio_info { struct tsec_mii_mng __iomem *regs;

Enable DM_ETH on all the defconfigs for the LS1043ARDB board.

Signed-off-by: Madalin Bucur madalin.bucur@oss.nxp.com --- configs/ls1043ardb_SECURE_BOOT_defconfig | 3 +++ configs/ls1043ardb_defconfig | 3 +++ configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 3 +++ configs/ls1043ardb_nand_defconfig | 3 +++ configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 3 +++ configs/ls1043ardb_sdcard_defconfig | 3 +++ configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 3 +++ configs/ls1043ardb_tfa_defconfig | 3 +++ 8 files changed, 24 insertions(+)

diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index 153a628..b06cbd8 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -13,6 +13,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -36,6 +37,8 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index d1e5343..82bd693 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -13,6 +13,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -40,6 +41,8 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_PCI=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 252c7c8..e708fbc 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -31,6 +31,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -57,6 +58,8 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_PCI=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index de18aaa..6b9b306 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -31,6 +31,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -58,6 +59,8 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_PCI=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 149b25f..c59caf1 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -30,6 +30,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -55,6 +56,8 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index b386fc6..b39a907 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -29,6 +29,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -57,6 +58,8 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_PCI=y diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig index 36eb0fc..9828320 100644 --- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig @@ -15,6 +15,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -38,6 +39,8 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig index eaddbca..6301076 100644 --- a/configs/ls1043ardb_tfa_defconfig +++ b/configs/ls1043ardb_tfa_defconfig @@ -16,6 +16,7 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_MISC_INIT_R=y CONFIG_CMD_IMLS=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y @@ -45,6 +46,8 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_PCI=y