[U-Boot] [PATCH][resubmit] eb_cpux9k2: add USB host support to board
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de --- include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9046cf0..eb05e2a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -139,6 +139,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@ /* * Hardware drivers */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION + +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/* * UART/CONSOLE
Dear Jens Scharsig,
- add USB host support to eb_cpux9k2 board
Did you test this too?
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9046cf0..eb05e2a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -139,6 +139,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@ /*
- Hardware drivers
*/ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/*
- UART/CONSOLE
Best regards, Marek Vasut
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
- add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9046cf0..eb05e2a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -139,6 +139,8 @@ #define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@ /*
- Hardware drivers
*/ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/*
- UART/CONSOLE
Best regards, Marek Vasut
Tested-by: Jens Scharsig js_at_ng@scharsoft.de
Best regards
Jens Scharsig
Dear esw@bus-elektronik.de,
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
- add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9046cf0..eb05e2a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -139,6 +139,8 @@
#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@
/*
- Hardware drivers
*/
+#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/*
- UART/CONSOLE
Best regards, Marek Vasut
Tested-by: Jens Scharsig js_at_ng@scharsoft.de
Best regards
Jens Scharsig _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Best regards, Marek Vasut
Dear Marek Vasut,
Dear esw@bus-elektronik.de,
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
- add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians. Albert what is your opinion ?
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Signed-off-by: Jens Scharsigjs_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9046cf0..eb05e2a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -139,6 +139,8 @@
#define CONFIG_CMD_PING #define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -169,6 +171,18 @@
/*
- Hardware drivers
*/
+#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_AT91C_PQFP_UHPBUG +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_EFI_PARTITION
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/*
- UART/CONSOLE
Best regards, Marek Vasut
Tested-by: Jens Scharsigjs_at_ng@scharsoft.de
Best regards
Jens Scharsig _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Best regards, Marek Vasut
Best regards
Jens Scharsig
Dear Jens Scharsig,
Dear Marek Vasut,
Dear esw@bus-elektronik.de,
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
- add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians.
Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy if we put this into next release? Since I just submitted my pullrq for -RC1 and I won't be too happy to push this into -RC2, it's way too far past merge window.
Albert what is your opinion ?
CCing Albert, Albert do you want me to push this through staging or you'll pick this?
Best regards, Marek Vasut
Dear Marek Vasut,
Dear esw@bus-elektronik.de,
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
- add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging ... or does Albert want to pick it directly via -arm (which would be better)?
I don't know which is better. You are the custodians.
Bah wah wah ... yes, we are the allmightly :-D Anyway, would you be too unhappy if we put this into next release? Since I just submitted my pullrq for -RC1 and
LOL
I have no problems to wait for next Release. I think you mean 2012.06. The patch have has first anniversary in soon. I would happy, if it gives not a second anniversary ;-)
Best regards
Jens Scharsig
Dear Jens Scharsig,
In message 1333294142-7433-1-git-send-email-js_at_ng@scharsoft.de you wrote:
- add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at_ng@scharsoft.de
include/configs/eb_cpux9k2.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
participants (4)
-
esw＠bus-elektronik.de -
Jens Scharsig -
Marek Vasut -
Wolfgang Denk