Use enable_gpmc_cs_config instead of local writing timing configuration for GPMC.

Signed-off-by: Thomas Weber weber@corscience.de --- Changelog v2: Change gpmc_net_config[6] to 0, because it is calculated in enable_gpmc_cs_config board/timll/devkit8000/devkit8000.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index b06aab6..10f189e 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -48,6 +48,16 @@

DECLARE_GLOBAL_DATA_PTR;

+static u32 gpmc_net_config[GPMC_MAX_REG] = { + NET_GPMC_CONFIG1, + NET_GPMC_CONFIG2, + NET_GPMC_CONFIG3, + NET_GPMC_CONFIG4, + NET_GPMC_CONFIG5, + NET_GPMC_CONFIG6, + 0 +}; + /* * Routine: board_init * Description: Early hardware init. @@ -82,13 +92,8 @@ int misc_init_r(void)

#ifdef CONFIG_DRIVER_DM9000 /* Configure GPMC registers for DM9000 */ - writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1); - writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2); - writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3); - writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4); - writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5); - writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6); - writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7); + enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6], + CONFIG_DM9000_BASE, GPMC_SIZE_16M);

/* Use OMAP DIE_ID as MAC address */ if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {