[U-Boot] [PATCH v1] config: Update KP's imx53 HSC config to pass key pressed information
The information about pressed key is relevant in performing correct update and recovery scenarios via USB pendrive.
This commit modifies envs to provide it.
Signed-off-by: Lukasz Majewski lukma@denx.de
---
include/configs/kp_imx53.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 9c7c908453..55bfa0fe59 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -44,6 +44,7 @@ "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ "initrd_ram_dev=/dev/ram\0" \ "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \ + "addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \ "loadusb=usb start; " \ "fatload usb 0 ${loadaddr} ${upd_image}\0" \ "up=if tftp ${loadaddr} ${uboot_file}; then " \ @@ -62,6 +63,7 @@ "run updargs; " \ "run addinitrd; " \ "run addswupdate; " \ + "run addkeys; " \ "run loadusb; " \ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV
Hi Stefano,
The information about pressed key is relevant in performing correct update and recovery scenarios via USB pendrive.
This commit modifies envs to provide it.
Signed-off-by: Lukasz Majewski lukma@denx.de
Please drop this standalone patch, as I've just sent a series http://patchwork.ozlabs.org/patch/1097058/ http://patchwork.ozlabs.org/patch/1097059/
which supersedes it.
Sorry for trouble.
include/configs/kp_imx53.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 9c7c908453..55bfa0fe59 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -44,6 +44,7 @@ "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ "initrd_ram_dev=/dev/ram\0" \ "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
- "addkeys=setenv bootargs ${bootargs} di=${dig_in}
key1=${key1}\0" \ "loadusb=usb start; " \ "fatload usb 0 ${loadaddr} ${upd_image}\0" \ "up=if tftp ${loadaddr} ${uboot_file}; then " \ @@ -62,6 +63,7 @@ "run updargs; " \ "run addinitrd; " \ "run addswupdate; " \
"run addkeys; " \ "run loadusb; " \ "bootm ${loadaddr}#${fit_config}\0" \
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
participants (1)
-
Lukasz Majewski