[U-Boot] [PATCH] config: ti_omap5_common: Palmas power support in SPL
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
Signed-off-by: Paul Kocialkowski contact@paulk.fr --- include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0aea7d1..34756de 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -261,6 +261,7 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4179a57..b33feb6 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -40,9 +40,7 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
-#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif
#include <asm/arch/cpu.h> #include <asm/arch/omap.h>
Le jeudi 02 juillet 2015 à 00:20 +0200, Paul Kocialkowski a écrit :
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
I sent this a while back and it hasn't been picked up yet. Anything holding it back in particular?
Signed-off-by: Paul Kocialkowski contact@paulk.fr
include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0aea7d1..34756de 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -261,6 +261,7 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4179a57..b33feb6 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -40,9 +40,7 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
-#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif
#include <asm/arch/cpu.h> #include <asm/arch/omap.h>
On Wed, Jul 15, 2015 at 02:56:23PM +0200, Paul Kocialkowski wrote:
Le jeudi 02 juillet 2015 à 00:20 +0200, Paul Kocialkowski a écrit :
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
I sent this a while back and it hasn't been picked up yet. Anything holding it back in particular?
Signed-off-by: Paul Kocialkowski contact@paulk.fr
include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0aea7d1..34756de 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -261,6 +261,7 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4179a57..b33feb6 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -40,9 +40,7 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
-#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif
#include <asm/arch/cpu.h> #include <asm/arch/omap.h>
Reviewed-by: Tom Rini trini@konsulko.com
Le jeudi 16 juillet 2015 à 09:21 -0400, Tom Rini a écrit :
On Wed, Jul 15, 2015 at 02:56:23PM +0200, Paul Kocialkowski wrote:
Le jeudi 02 juillet 2015 à 00:20 +0200, Paul Kocialkowski a écrit :
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
I sent this a while back and it hasn't been picked up yet. Anything holding it back in particular?
Signed-off-by: Paul Kocialkowski contact@paulk.fr
include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0aea7d1..34756de 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -261,6 +261,7 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4179a57..b33feb6 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -40,9 +40,7 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
-#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif
#include <asm/arch/cpu.h> #include <asm/arch/omap.h>
Reviewed-by: Tom Rini trini@konsulko.com
Now that the merge window is open, I think we could merge that one.
What do you think?
Thanks!
On Thu, Jul 02, 2015 at 12:20:25AM +0200, Paul Kocialkowski wrote:
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
Signed-off-by: Paul Kocialkowski contact@paulk.fr Reviewed-by: Tom Rini trini@konsulko.com
Applied to u-boot/master, thanks!
participants (2)
-
Paul Kocialkowski -
Tom Rini