On 5/6/22 10:51, Patrick DELAUNAY wrote:

Hi,

On 4/22/22 09:39, Patrice Chotard wrote:

...

Always consider USB cable is connected when USB boot device is detected.

Signed-off-by: Patrice Chotard patrice.chotard@foss.st.com

board/st/stm32mp1/stm32mp1.c | 7 +++++++   1 file changed, 7 insertions(+)

diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index fff1880e5b..62a5fc23e6 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -199,6 +199,13 @@ int g_dnl_board_usb_cable_connected(void)       if (!IS_ENABLED(CONFIG_USB_GADGET_DWC2_OTG))           return -ENODEV;   +    /* +     * In case of USB boot device is detected, consider USB cable is +     * connected +     */ +    if ((get_bootmode() & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_USB) +        return true;

/* if typec stusb160x is present, means DK1 or DK2 board */       ret = stusb160x_cable_connected();       if (ret >= 0)

Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com

Thanks Patrick

Applied to u-boot-stm32

Thanks Patrice