[U-Boot] [PATCH v4 0/7] Add gdsys ControlCenter Digital board
Changes in v4: - consider CONFIG_CMD_BOOTM for all architectures
Changes in v3: - fix email addresses
Changes in v2: - configuration for SPI builds was missing - replace some numeric constants with named constants - style fixes (as shown by checkpatch.pl) in common/cmd_tpm.c and lib/tpm.c - whitespace fixes
Dirk Eibach (5): Update gdsys email account mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY Add Atmel I2C tpm Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM mpc85xx: Add gdsys ControlCenter Digital board
Reinhard Pfau (2): tpm: add AUTH1 cmds for LoadKey2 and GetPubKey i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
MAINTAINERS | 2 +- README | 20 + arch/arm/lib/Makefile | 2 +- arch/avr32/lib/Makefile | 2 +- arch/m68k/lib/Makefile | 2 +- arch/microblaze/lib/Makefile | 2 +- arch/mips/lib/Makefile | 4 +- arch/nds32/lib/Makefile | 3 +- arch/nios2/lib/Makefile | 2 +- arch/openrisc/lib/Makefile | 2 +- arch/powerpc/cpu/mpc85xx/mp.c | 8 +- arch/powerpc/cpu/ppc4xx/cmd_chip_config.c | 2 +- arch/powerpc/include/asm/ppc4xx_config.h | 2 +- arch/powerpc/lib/Makefile | 2 +- arch/sh/lib/Makefile | 2 +- arch/sparc/lib/Makefile | 3 +- arch/x86/lib/Makefile | 2 +- board/gdsys/405ep/405ep.c | 2 +- board/gdsys/405ep/dlvision-10g.c | 2 +- board/gdsys/405ep/io.c | 2 +- board/gdsys/405ep/iocon.c | 2 +- board/gdsys/405ep/neo.c | 2 +- board/gdsys/405ex/io64.c | 2 +- board/gdsys/common/Makefile | 1 + board/gdsys/common/dp501.c | 107 +++ board/gdsys/common/dp501.h | 30 + board/gdsys/common/miiphybb.c | 2 +- board/gdsys/common/osd.c | 2 +- board/gdsys/common/osd.h | 2 +- board/gdsys/dlvision/dlvision.c | 2 +- board/gdsys/gdppc440etx/gdppc440etx.c | 2 +- board/gdsys/gdppc440etx/init.S | 2 +- board/gdsys/intip/init.S | 2 +- board/gdsys/intip/intip.c | 2 +- board/gdsys/p1022/Makefile | 37 + board/gdsys/p1022/controlcenterd-id.c | 1205 +++++++++++++++++++++++++++++ board/gdsys/p1022/controlcenterd-id.h | 29 + board/gdsys/p1022/controlcenterd.c | 447 +++++++++++ board/gdsys/p1022/ddr.c | 71 ++ board/gdsys/p1022/diu.c | 87 +++ board/gdsys/p1022/law.c | 20 + board/gdsys/p1022/sdhc_boot.c | 63 ++ board/gdsys/p1022/tlb.c | 77 ++ boards.cfg | 7 + common/cmd_tpm.c | 100 +++ drivers/gpio/pca9698.c | 2 +- drivers/hwmon/lm63.c | 2 +- drivers/i2c/fsl_i2c.c | 9 +- drivers/tpm/Makefile | 1 + drivers/tpm/atmel_twi_tpm.c | 119 +++ include/configs/controlcenterd.h | 525 +++++++++++++ include/configs/dlvision-10g.h | 2 +- include/configs/dlvision.h | 2 +- include/configs/gdppc440etx.h | 2 +- include/configs/intip.h | 2 +- include/configs/io.h | 2 +- include/configs/io64.h | 2 +- include/configs/iocon.h | 2 +- include/configs/neo.h | 2 +- include/gdsys_fpga.h | 2 +- include/pca9698.h | 2 +- include/tpm.h | 174 +++++ lib/tpm.c | 351 +++++++++- 63 files changed, 3526 insertions(+), 48 deletions(-) create mode 100644 board/gdsys/common/dp501.c create mode 100644 board/gdsys/common/dp501.h create mode 100644 board/gdsys/p1022/Makefile create mode 100644 board/gdsys/p1022/controlcenterd-id.c create mode 100644 board/gdsys/p1022/controlcenterd-id.h create mode 100644 board/gdsys/p1022/controlcenterd.c create mode 100644 board/gdsys/p1022/ddr.c create mode 100644 board/gdsys/p1022/diu.c create mode 100644 board/gdsys/p1022/law.c create mode 100644 board/gdsys/p1022/sdhc_boot.c create mode 100644 board/gdsys/p1022/tlb.c create mode 100644 drivers/tpm/atmel_twi_tpm.c create mode 100644 include/configs/controlcenterd.h
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc
--- Changes in v4: None Changes in v3: - fix email addresses
Changes in v2: None
MAINTAINERS | 2 +- arch/powerpc/cpu/ppc4xx/cmd_chip_config.c | 2 +- arch/powerpc/include/asm/ppc4xx_config.h | 2 +- board/gdsys/405ep/405ep.c | 2 +- board/gdsys/405ep/dlvision-10g.c | 2 +- board/gdsys/405ep/io.c | 2 +- board/gdsys/405ep/iocon.c | 2 +- board/gdsys/405ep/neo.c | 2 +- board/gdsys/405ex/io64.c | 2 +- board/gdsys/common/miiphybb.c | 2 +- board/gdsys/common/osd.c | 2 +- board/gdsys/common/osd.h | 2 +- board/gdsys/dlvision/dlvision.c | 2 +- board/gdsys/gdppc440etx/gdppc440etx.c | 2 +- board/gdsys/gdppc440etx/init.S | 2 +- board/gdsys/intip/init.S | 2 +- board/gdsys/intip/intip.c | 2 +- drivers/gpio/pca9698.c | 2 +- drivers/hwmon/lm63.c | 2 +- include/configs/dlvision-10g.h | 2 +- include/configs/dlvision.h | 2 +- include/configs/gdppc440etx.h | 2 +- include/configs/intip.h | 2 +- include/configs/io.h | 2 +- include/configs/io64.h | 2 +- include/configs/iocon.h | 2 +- include/configs/neo.h | 2 +- include/gdsys_fpga.h | 2 +- include/pca9698.h | 2 +- 29 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS index 643a5ac..d25b692 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -158,7 +158,7 @@ egnite GmbH info@egnite.de
ethernut5 ARM926EJS (AT91SAM9XE SoC)
-Dirk Eibach eibach@gdsys.de +Dirk Eibach dirk.eibach@gdsys.cc
devconcenter PPC460EX dlvision PPC405EP diff --git a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c index 72c5aec..904dafe 100644 --- a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c +++ b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c @@ -3,7 +3,7 @@ * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/powerpc/include/asm/ppc4xx_config.h b/arch/powerpc/include/asm/ppc4xx_config.h index 49acb60..cb95d7d 100644 --- a/arch/powerpc/include/asm/ppc4xx_config.h +++ b/arch/powerpc/include/asm/ppc4xx_config.h @@ -3,7 +3,7 @@ * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index 6221171..e554c03 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c index 644493b..9dccfc3 100644 --- a/board/gdsys/405ep/dlvision-10g.c +++ b/board/gdsys/405ep/dlvision-10g.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c index 070dcbb..35ca8b3 100644 --- a/board/gdsys/405ep/io.c +++ b/board/gdsys/405ep/io.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index 0fc7db2..3e10357 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c index d336e55..bfcde62 100644 --- a/board/gdsys/405ep/neo.c +++ b/board/gdsys/405ep/neo.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2011 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c index 7d2899d..4effd17 100644 --- a/board/gdsys/405ex/io64.c +++ b/board/gdsys/405ex/io64.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * based on kilauea.c * by Stefan Roese, DENX Software Engineering, sr@denx.de. diff --git a/board/gdsys/common/miiphybb.c b/board/gdsys/common/miiphybb.c index 46f1a1e..51875ee 100644 --- a/board/gdsys/common/miiphybb.c +++ b/board/gdsys/common/miiphybb.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index a192c98..54b4ec7 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/common/osd.h b/board/gdsys/common/osd.h index c59d9c3..4bfcf7c 100644 --- a/board/gdsys/common/osd.h +++ b/board/gdsys/common/osd.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c index 5c70326..6416081 100644 --- a/board/gdsys/dlvision/dlvision.c +++ b/board/gdsys/dlvision/dlvision.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index c58411e..bc01756 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * Based on board/amcc/yosemite/yosemite.c * (C) Copyright 2006-2007 diff --git a/board/gdsys/gdppc440etx/init.S b/board/gdsys/gdppc440etx/init.S index 4a40e4b..a283a52 100644 --- a/board/gdsys/gdppc440etx/init.S +++ b/board/gdsys/gdppc440etx/init.S @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 -* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de +* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * based on board/amcc/yosemite/init.S * original Copyright not specified there diff --git a/board/gdsys/intip/init.S b/board/gdsys/intip/init.S index 7513f1d..9b6763a 100644 --- a/board/gdsys/intip/init.S +++ b/board/gdsys/intip/init.S @@ -1,6 +1,6 @@ /* * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * Based on board/amcc/canyonlands/init.S * (C) Copyright 2008 diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index 0132b25..25a2b6c 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * Based on board/amcc/canyonlands/canyonlands.c * (C) Copyright 2008 diff --git a/drivers/gpio/pca9698.c b/drivers/gpio/pca9698.c index fe6d2c6..7cc4e40 100644 --- a/drivers/gpio/pca9698.c +++ b/drivers/gpio/pca9698.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2011 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index f3adf64..525e220 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2007-2008 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * based on lm75.c by Bill Hunter * * See file CREDITS for list of people who contributed to this diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 2cd2027..eb00e42 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index c490ff6..a4ecc19 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 9efbb8e..bac258d 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * Based on include/configs/yosemite.h * (C) Copyright 2005-2007 diff --git a/include/configs/intip.h b/include/configs/intip.h index 33364a8..4a26888 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * Based on include/configs/canyonlands.h * (C) Copyright 2008 diff --git a/include/configs/io.h b/include/configs/io.h index 03661cc..ce7d500 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/include/configs/io64.h b/include/configs/io64.h index 887aaef..ace4404 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2011 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * based on kilauea.h * by Stefan Roese, DENX Software Engineering, sr@denx.de. diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 7f8825b..1119049 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/include/configs/neo.h b/include/configs/neo.h index 38b5bec..7356e85 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2007-2008 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 1758d74..a253f51 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project. diff --git a/include/pca9698.h b/include/pca9698.h index 67b364e..716c2b8 100644 --- a/include/pca9698.h +++ b/include/pca9698.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2011 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * * See file CREDITS for list of people who contributed to this * project.
From: Reinhard Pfau pfau@gdsys.de
Extend the tpm library with support for single authorized (AUTH1) commands as specified in the TCG Main Specification 1.2. (The internally used helper functions are implemented in a way that they could also be used for double authorized commands if someone needs it.)
Provide enums with the return codes from the TCG Main specification.
For now only a single OIAP session is supported.
OIAP authorized version of the commands TPM_LoadKey2 and TPM_GetPubKey are provided. Both features are available using the 'tpm' command, too.
Authorized commands are enabled with CONFIG_TPM_AUTH_SESSIONS. (Note that this also requires CONFIG_SHA1 to be enabled.)
Signed-off-by: Reinhard Pfau reinhard.pfau@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc --- Changes in v4: None Changes in v3: - fix email addresses
Changes in v2: - replace some numeric constants with named constants - style fixes (as shown by checkpatch.pl) in common/cmd_tpm.c and lib/tpm.c
README | 14 ++ common/cmd_tpm.c | 100 +++++++++++++++ include/tpm.h | 174 +++++++++++++++++++++++++++ lib/tpm.c | 351 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 638 insertions(+), 1 deletions(-)
diff --git a/README b/README index 0bc0af5..58b2ee5 100644 --- a/README +++ b/README @@ -1210,6 +1210,20 @@ The following options need to be configured: to. Contemporary x86 systems usually map it at 0xfed40000.
+ CONFIG_CMD_TPM + Add tpm monitor functions. + Requires CONFIG_TPM. If CONFIG_TPM_AUTH_SESSIONS is set, also + provides monitor access to authorized functions. + + CONFIG_TPM + Define this to enable the TPM support library which provides + functional interfaces to some TPM commands. + Requires support for a TPM device. + + CONFIG_TPM_AUTH_SESSIONS + Define this to enable authorized functions in the TPM library. + Requires CONFIG_TPM and CONFIG_SHA1. + - USB Support: At the moment only the UHCI host controller is supported (PIP405, MIP405, MPC5200); define diff --git a/common/cmd_tpm.c b/common/cmd_tpm.c index 46fae18..c34000a 100644 --- a/common/cmd_tpm.c +++ b/common/cmd_tpm.c @@ -27,6 +27,13 @@ #include <asm/unaligned.h> #include <linux/string.h>
+/* Useful constants */ +enum { + DIGEST_LENGTH = 20, + /* max lengths, valid for RSA keys <= 2048 bits */ + TPM_PUBKEY_MAX_LENGTH = 288, +}; + /** * Print a byte string in hexdecimal format, 16-bytes per line. * @@ -546,6 +553,72 @@ static int do_tpm_nv_write(cmd_tbl_t *cmdtp, int flag, return convert_return_code(err); }
+#ifdef CONFIG_TPM_AUTH_SESSIONS + +static int do_tpm_oiap(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + uint32_t auth_handle, err; + + err = tpm_oiap(&auth_handle); + + return convert_return_code(err); +} + +static int do_tpm_load_key2_oiap(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + uint32_t parent_handle, key_len, key_handle, err; + uint8_t usage_auth[DIGEST_LENGTH]; + void *key; + + if (argc < 5) + return CMD_RET_USAGE; + + parent_handle = simple_strtoul(argv[1], NULL, 0); + key = (void *)simple_strtoul(argv[2], NULL, 0); + key_len = simple_strtoul(argv[3], NULL, 0); + if (strlen(argv[4]) != 2 * DIGEST_LENGTH) + return CMD_RET_FAILURE; + parse_byte_string(argv[4], usage_auth, NULL); + + err = tpm_load_key2_oiap(parent_handle, key, key_len, usage_auth, + &key_handle); + if (!err) + printf("Key handle is 0x%x\n", key_handle); + + return convert_return_code(err); +} + +static int do_tpm_get_pub_key_oiap(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + uint32_t key_handle, err; + uint8_t usage_auth[DIGEST_LENGTH]; + uint8_t pub_key_buffer[TPM_PUBKEY_MAX_LENGTH]; + size_t pub_key_len = sizeof(pub_key_buffer); + + if (argc < 3) + return CMD_RET_USAGE; + + key_handle = simple_strtoul(argv[1], NULL, 0); + if (strlen(argv[2]) != 2 * DIGEST_LENGTH) + return CMD_RET_FAILURE; + parse_byte_string(argv[2], usage_auth, NULL); + + err = tpm_get_pub_key_oiap(key_handle, usage_auth, + pub_key_buffer, &pub_key_len); + if (!err) { + printf("dump of received pub key structure:\n"); + print_byte_string(pub_key_buffer, pub_key_len); + } + return convert_return_code(err); +} + +TPM_COMMAND_NO_ARG(tpm_end_oiap) + +#endif /* CONFIG_TPM_AUTH_SESSIONS */ + #define MAKE_TPM_CMD_ENTRY(cmd) \ U_BOOT_CMD_MKENT(cmd, 0, 1, do_tpm_ ## cmd, "", "")
@@ -590,6 +663,16 @@ static cmd_tbl_t tpm_commands[] = { do_tpm_nv_read, "", ""), U_BOOT_CMD_MKENT(nv_write, 0, 1, do_tpm_nv_write, "", ""), +#ifdef CONFIG_TPM_AUTH_SESSIONS + U_BOOT_CMD_MKENT(oiap, 0, 1, + do_tpm_oiap, "", ""), + U_BOOT_CMD_MKENT(end_oiap, 0, 1, + do_tpm_end_oiap, "", ""), + U_BOOT_CMD_MKENT(load_key2_oiap, 0, 1, + do_tpm_load_key2_oiap, "", ""), + U_BOOT_CMD_MKENT(get_pub_key_oiap, 0, 1, + do_tpm_get_pub_key_oiap, "", ""), +#endif /* CONFIG_TPM_AUTH_SESSIONS */ };
static int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -638,6 +721,16 @@ U_BOOT_CMD(tpm, CONFIG_SYS_MAXARGS, 1, do_tpm, " get_capability cap_area sub_cap addr count\n" " - Read <count> bytes of TPM capability indexed by <cap_area> and\n" " <sub_cap> to memory address <addr>.\n" +#ifdef CONFIG_TPM_AUTH_SESSIONS +"Storage functions\n" +" loadkey2_oiap parent_handle key_addr key_len usage_auth\n" +" - loads a key data from memory address <key_addr>, <key_len> bytes\n" +" into TPM using the parent key <parent_handle> with authorization\n" +" <usage_auth> (20 bytes hex string).\n" +" get_pub_key_oiap key_handle usage_auth\n" +" - get the public key portion of a loaded key <key_handle> using\n" +" authorization <usage auth> (20 bytes hex string)\n" +#endif /* CONFIG_TPM_AUTH_SESSIONS */ "Endorsement Key Handling Commands:\n" " read_pubek addr count\n" " - Read <count> bytes of the public endorsement key to memory\n" @@ -648,6 +741,13 @@ U_BOOT_CMD(tpm, CONFIG_SYS_MAXARGS, 1, do_tpm, " <digest_hex_string>\n" " pcr_read index addr count\n" " - Read <count> bytes from PCR <index> to memory address <addr>.\n" +#ifdef CONFIG_TPM_AUTH_SESSIONS +"Authorization Sessions\n" +" oiap\n" +" - setup an OIAP session\n" +" end_oiap\n" +" - terminates an active OIAP session\n" +#endif /* CONFIG_TPM_AUTH_SESSIONS */ "Non-volatile Storage Commands:\n" " nv_define_space index permission size\n" " - Establish a space at index <index> with <permission> of <size> bytes.\n" diff --git a/include/tpm.h b/include/tpm.h index 7219b73..5e9f832 100644 --- a/include/tpm.h +++ b/include/tpm.h @@ -1,5 +1,6 @@ /* * Copyright (c) 2013 The Chromium OS Authors. + * Coypright (c) 2013 Guntermann & Drunck GmbH * * See file CREDITS for list of people who contributed to this * project. @@ -54,6 +55,120 @@ enum tpm_nv_index { };
/** + * TPM return codes as defined in the TCG Main specification + * (TPM Main Part 2 Structures; Specification version 1.2) + */ +enum tpm_return_code { + TPM_BASE = 0x00000000, + TPM_NON_FATAL = 0x00000800, + TPM_SUCCESS = TPM_BASE, + /* TPM-defined fatal error codes */ + TPM_AUTHFAIL = TPM_BASE + 1, + TPM_BADINDEX = TPM_BASE + 2, + TPM_BAD_PARAMETER = TPM_BASE + 3, + TPM_AUDITFAILURE = TPM_BASE + 4, + TPM_CLEAR_DISABLED = TPM_BASE + 5, + TPM_DEACTIVATED = TPM_BASE + 6, + TPM_DISABLED = TPM_BASE + 7, + TPM_DISABLED_CMD = TPM_BASE + 8, + TPM_FAIL = TPM_BASE + 9, + TPM_BAD_ORDINAL = TPM_BASE + 10, + TPM_INSTALL_DISABLED = TPM_BASE + 11, + TPM_INVALID_KEYHANDLE = TPM_BASE + 12, + TPM_KEYNOTFOUND = TPM_BASE + 13, + TPM_INAPPROPRIATE_ENC = TPM_BASE + 14, + TPM_MIGRATE_FAIL = TPM_BASE + 15, + TPM_INVALID_PCR_INFO = TPM_BASE + 16, + TPM_NOSPACE = TPM_BASE + 17, + TPM_NOSRK = TPM_BASE + 18, + TPM_NOTSEALED_BLOB = TPM_BASE + 19, + TPM_OWNER_SET = TPM_BASE + 20, + TPM_RESOURCES = TPM_BASE + 21, + TPM_SHORTRANDOM = TPM_BASE + 22, + TPM_SIZE = TPM_BASE + 23, + TPM_WRONGPCRVAL = TPM_BASE + 24, + TPM_BAD_PARAM_SIZE = TPM_BASE + 25, + TPM_SHA_THREAD = TPM_BASE + 26, + TPM_SHA_ERROR = TPM_BASE + 27, + TPM_FAILEDSELFTEST = TPM_BASE + 28, + TPM_AUTH2FAIL = TPM_BASE + 29, + TPM_BADTAG = TPM_BASE + 30, + TPM_IOERROR = TPM_BASE + 31, + TPM_ENCRYPT_ERROR = TPM_BASE + 32, + TPM_DECRYPT_ERROR = TPM_BASE + 33, + TPM_INVALID_AUTHHANDLE = TPM_BASE + 34, + TPM_NO_ENDORSEMENT = TPM_BASE + 35, + TPM_INVALID_KEYUSAGE = TPM_BASE + 36, + TPM_WRONG_ENTITYTYPE = TPM_BASE + 37, + TPM_INVALID_POSTINIT = TPM_BASE + 38, + TPM_INAPPROPRIATE_SIG = TPM_BASE + 39, + TPM_BAD_KEY_PROPERTY = TPM_BASE + 40, + TPM_BAD_MIGRATION = TPM_BASE + 41, + TPM_BAD_SCHEME = TPM_BASE + 42, + TPM_BAD_DATASIZE = TPM_BASE + 43, + TPM_BAD_MODE = TPM_BASE + 44, + TPM_BAD_PRESENCE = TPM_BASE + 45, + TPM_BAD_VERSION = TPM_BASE + 46, + TPM_NO_WRAP_TRANSPORT = TPM_BASE + 47, + TPM_AUDITFAIL_UNSUCCESSFUL = TPM_BASE + 48, + TPM_AUDITFAIL_SUCCESSFUL = TPM_BASE + 49, + TPM_NOTRESETABLE = TPM_BASE + 50, + TPM_NOTLOCAL = TPM_BASE + 51, + TPM_BAD_TYPE = TPM_BASE + 52, + TPM_INVALID_RESOURCE = TPM_BASE + 53, + TPM_NOTFIPS = TPM_BASE + 54, + TPM_INVALID_FAMILY = TPM_BASE + 55, + TPM_NO_NV_PERMISSION = TPM_BASE + 56, + TPM_REQUIRES_SIGN = TPM_BASE + 57, + TPM_KEY_NOTSUPPORTED = TPM_BASE + 58, + TPM_AUTH_CONFLICT = TPM_BASE + 59, + TPM_AREA_LOCKED = TPM_BASE + 60, + TPM_BAD_LOCALITY = TPM_BASE + 61, + TPM_READ_ONLY = TPM_BASE + 62, + TPM_PER_NOWRITE = TPM_BASE + 63, + TPM_FAMILY_COUNT = TPM_BASE + 64, + TPM_WRITE_LOCKED = TPM_BASE + 65, + TPM_BAD_ATTRIBUTES = TPM_BASE + 66, + TPM_INVALID_STRUCTURE = TPM_BASE + 67, + TPM_KEY_OWNER_CONTROL = TPM_BASE + 68, + TPM_BAD_COUNTER = TPM_BASE + 69, + TPM_NOT_FULLWRITE = TPM_BASE + 70, + TPM_CONTEXT_GAP = TPM_BASE + 71, + TPM_MAXNVWRITES = TPM_BASE + 72, + TPM_NOOPERATOR = TPM_BASE + 73, + TPM_RESOURCEMISSING = TPM_BASE + 74, + TPM_DELEGATE_LOCK = TPM_BASE + 75, + TPM_DELEGATE_FAMILY = TPM_BASE + 76, + TPM_DELEGATE_ADMIN = TPM_BASE + 77, + TPM_TRANSPORT_NOTEXCLUSIVE = TPM_BASE + 78, + TPM_OWNER_CONTROL = TPM_BASE + 79, + TPM_DAA_RESOURCES = TPM_BASE + 80, + TPM_DAA_INPUT_DATA0 = TPM_BASE + 81, + TPM_DAA_INPUT_DATA1 = TPM_BASE + 82, + TPM_DAA_ISSUER_SETTINGS = TPM_BASE + 83, + TPM_DAA_TPM_SETTINGS = TPM_BASE + 84, + TPM_DAA_STAGE = TPM_BASE + 85, + TPM_DAA_ISSUER_VALIDITY = TPM_BASE + 86, + TPM_DAA_WRONG_W = TPM_BASE + 87, + TPM_BAD_HANDLE = TPM_BASE + 88, + TPM_BAD_DELEGATE = TPM_BASE + 89, + TPM_BADCONTEXT = TPM_BASE + 90, + TPM_TOOMANYCONTEXTS = TPM_BASE + 91, + TPM_MA_TICKET_SIGNATURE = TPM_BASE + 92, + TPM_MA_DESTINATION = TPM_BASE + 93, + TPM_MA_SOURCE = TPM_BASE + 94, + TPM_MA_AUTHORITY = TPM_BASE + 95, + TPM_PERMANENTEK = TPM_BASE + 97, + TPM_BAD_SIGNATURE = TPM_BASE + 98, + TPM_NOCONTEXTSPACE = TPM_BASE + 99, + /* TPM-defined non-fatal errors */ + TPM_RETRY = TPM_BASE + TPM_NON_FATAL, + TPM_NEEDS_SELFTEST = TPM_BASE + TPM_NON_FATAL + 1, + TPM_DOING_SELFTEST = TPM_BASE + TPM_NON_FATAL + 2, + TPM_DEFEND_LOCK_RUNNING = TPM_BASE + TPM_NON_FATAL + 3, +}; + +/** * Initialize TPM device. It must be called before any TPM commands. * * @return 0 on success, non-0 on error. @@ -201,4 +316,63 @@ uint32_t tpm_physical_set_deactivated(uint8_t state); uint32_t tpm_get_capability(uint32_t cap_area, uint32_t sub_cap, void *cap, size_t count);
+/** + * Issue a TPM_FlushSpecific command for a AUTH ressource. + * + * @param auth_handle handle of the auth session + * @return return code of the operation + */ +uint32_t tpm_terminate_auth_session(uint32_t auth_handle); + +/** + * Issue a TPM_OIAP command to setup an object independant authorization + * session. + * Information about the session is stored internally. + * If there was already an OIAP session active it is terminated and a new + * session is set up. + * + * @param auth_handle pointer to the (new) auth handle or NULL. + * @return return code of the operation + */ +uint32_t tpm_oiap(uint32_t *auth_handle); + +/** + * Ends an active OIAP session. + * + * @return return code of the operation + */ +uint32_t tpm_end_oiap(void); + +/** + * Issue a TPM_LoadKey2 (Auth1) command using an OIAP session for authenticating + * the usage of the parent key. + * + * @param parent_handle handle of the parent key. + * @param key pointer to the key structure (TPM_KEY or TPM_KEY12). + * @param key_length size of the key structure + * @param parent_key_usage_auth usage auth for the parent key + * @param key_handle pointer to the key handle + * @return return code of the operation + */ +uint32_t tpm_load_key2_oiap(uint32_t parent_handle, + const void *key, size_t key_length, + const void *parent_key_usage_auth, + uint32_t *key_handle); + +/** + * Issue a TPM_GetPubKey (Auth1) command using an OIAP session for + * authenticating the usage of the key. + * + * @param key_handle handle of the key + * @param usage_auth usage auth for the key + * @param pubkey pointer to the pub key buffer; may be NULL if the pubkey + * should not be stored. + * @param pubkey_len pointer to the pub key buffer len. On entry: the size of + * the provided pubkey buffer. On successful exit: the size + * of the stored TPM_PUBKEY structure (iff pubkey != NULL). + * @return return code of the operation + */ +uint32_t tpm_get_pub_key_oiap(uint32_t key_handle, const void *usage_auth, + void *pubkey, size_t *pubkey_len); + #endif /* __TPM_H */ diff --git a/lib/tpm.c b/lib/tpm.c index 42c9bea..f0b4f59 100644 --- a/lib/tpm.c +++ b/lib/tpm.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2013 The Chromium OS Authors. + * Coypright (c) 2013 Guntermann & Drunck GmbH * * See file CREDITS for list of people who contributed to this * project. @@ -22,6 +23,7 @@
#include <common.h> #include <stdarg.h> +#include <sha1.h> #include <tpm.h> #include <asm/unaligned.h>
@@ -35,8 +37,31 @@ enum { TPM_REQUEST_HEADER_LENGTH = 10, TPM_RESPONSE_HEADER_LENGTH = 10, PCR_DIGEST_LENGTH = 20, + DIGEST_LENGTH = 20, + TPM_REQUEST_AUTH_LENGTH = 45, + TPM_RESPONSE_AUTH_LENGTH = 41, + /* some max lengths, valid for RSA keys <= 2048 bits */ + TPM_KEY12_MAX_LENGTH = 618, + TPM_PUBKEY_MAX_LENGTH = 288, };
+#ifdef CONFIG_TPM_AUTH_SESSIONS + +#ifndef CONFIG_SHA1 +#error "TPM_AUTH_SESSIONS require SHA1 to be configured, too" +#endif /* !CONFIG_SHA1 */ + +struct session_data { + int valid; + uint32_t handle; + uint8_t nonce_even[DIGEST_LENGTH]; + uint8_t nonce_odd[DIGEST_LENGTH]; +}; + +static struct session_data oiap_session = {0, }; + +#endif /* CONFIG_TPM_AUTH_SESSIONS */ + /** * Pack data into a byte string. The data types are specified in * the format string: 'b' means unsigned byte, 'w' unsigned word, @@ -235,7 +260,7 @@ static uint32_t tpm_sendrecv_command(const void *command, response, &response_length); if (err) return TPM_LIB_ERROR; - if (response) + if (size_ptr) *size_ptr = response_length;
return tpm_return_code(response); @@ -579,3 +604,327 @@ uint32_t tpm_get_capability(uint32_t cap_area, uint32_t sub_cap,
return 0; } + +#ifdef CONFIG_TPM_AUTH_SESSIONS + +/** + * Fill an authentication block in a request. + * This func can create the first as well as the second auth block (for + * double authorized commands). + * + * @param request pointer to the request (w/ uninitialised auth data) + * @param request_len0 length of the request without auth data + * @param handles_len length of the handles area in request + * @param auth_session pointer to the (valid) auth session to be used + * @param request_auth pointer to the auth block of the request to be filled + * @param auth authentication data (HMAC key) + */ +static uint32_t create_request_auth(const void *request, size_t request_len0, + size_t handles_len, + struct session_data *auth_session, + void *request_auth, const void *auth) +{ + uint8_t hmac_data[DIGEST_LENGTH * 3 + 1]; + sha1_context hash_ctx; + const size_t command_code_offset = 6; + const size_t auth_nonce_odd_offset = 4; + const size_t auth_continue_offset = 24; + const size_t auth_auth_offset = 25; + + if (!auth_session || !auth_session->valid) + return TPM_LIB_ERROR; + + sha1_starts(&hash_ctx); + sha1_update(&hash_ctx, request + command_code_offset, 4); + if (request_len0 > TPM_REQUEST_HEADER_LENGTH + handles_len) + sha1_update(&hash_ctx, + request + TPM_REQUEST_HEADER_LENGTH + handles_len, + request_len0 - TPM_REQUEST_HEADER_LENGTH + - handles_len); + sha1_finish(&hash_ctx, hmac_data); + + sha1_starts(&hash_ctx); + sha1_update(&hash_ctx, auth_session->nonce_odd, DIGEST_LENGTH); + sha1_update(&hash_ctx, hmac_data, sizeof(hmac_data)); + sha1_finish(&hash_ctx, auth_session->nonce_odd); + + if (pack_byte_string(request_auth, TPM_REQUEST_AUTH_LENGTH, "dsb", + 0, auth_session->handle, + auth_nonce_odd_offset, auth_session->nonce_odd, + DIGEST_LENGTH, + auth_continue_offset, 1)) + return TPM_LIB_ERROR; + if (pack_byte_string(hmac_data, sizeof(hmac_data), "ss", + DIGEST_LENGTH, + auth_session->nonce_even, + DIGEST_LENGTH, + 2 * DIGEST_LENGTH, + request_auth + auth_nonce_odd_offset, + DIGEST_LENGTH + 1)) + return TPM_LIB_ERROR; + sha1_hmac(auth, DIGEST_LENGTH, hmac_data, sizeof(hmac_data), + request_auth + auth_auth_offset); + + return TPM_SUCCESS; +} + +/** + * Verify an authentication block in a response. + * Since this func updates the nonce_even in the session data it has to be + * called when receiving a succesfull AUTH response. + * This func can verify the first as well as the second auth block (for + * double authorized commands). + * + * @param command_code command code of the request + * @param response pointer to the request (w/ uninitialised auth data) + * @param handles_len length of the handles area in response + * @param auth_session pointer to the (valid) auth session to be used + * @param response_auth pointer to the auth block of the response to be verified + * @param auth authentication data (HMAC key) + */ +static uint32_t verify_response_auth(uint32_t command_code, + const void *response, size_t response_len0, + size_t handles_len, + struct session_data *auth_session, + const void *response_auth, const void *auth) +{ + uint8_t hmac_data[DIGEST_LENGTH * 3 + 1]; + uint8_t computed_auth[DIGEST_LENGTH]; + sha1_context hash_ctx; + const size_t return_code_offset = 6; + const size_t auth_continue_offset = 20; + const size_t auth_auth_offset = 21; + uint8_t auth_continue; + + if (!auth_session || !auth_session->valid) + return TPM_AUTHFAIL; + if (pack_byte_string(hmac_data, sizeof(hmac_data), "d", + 0, command_code)) + return TPM_LIB_ERROR; + if (response_len0 < TPM_RESPONSE_HEADER_LENGTH) + return TPM_LIB_ERROR; + + sha1_starts(&hash_ctx); + sha1_update(&hash_ctx, response + return_code_offset, 4); + sha1_update(&hash_ctx, hmac_data, 4); + if (response_len0 > TPM_RESPONSE_HEADER_LENGTH + handles_len) + sha1_update(&hash_ctx, + response + TPM_RESPONSE_HEADER_LENGTH + handles_len, + response_len0 - TPM_RESPONSE_HEADER_LENGTH + - handles_len); + sha1_finish(&hash_ctx, hmac_data); + + memcpy(auth_session->nonce_even, response_auth, DIGEST_LENGTH); + auth_continue = ((uint8_t *)response_auth)[auth_continue_offset]; + if (pack_byte_string(hmac_data, sizeof(hmac_data), "ssb", + DIGEST_LENGTH, + response_auth, + DIGEST_LENGTH, + 2 * DIGEST_LENGTH, + auth_session->nonce_odd, + DIGEST_LENGTH, + 3 * DIGEST_LENGTH, + auth_continue)) + return TPM_LIB_ERROR; + + sha1_hmac(auth, DIGEST_LENGTH, hmac_data, sizeof(hmac_data), + computed_auth); + + if (memcmp(computed_auth, response_auth + auth_auth_offset, + DIGEST_LENGTH)) + return TPM_AUTHFAIL; + + return TPM_SUCCESS; +} + + +uint32_t tpm_terminate_auth_session(uint32_t auth_handle) +{ + const uint8_t command[18] = { + 0x00, 0xc1, /* TPM_TAG */ + 0x00, 0x00, 0x00, 0x00, /* parameter size */ + 0x00, 0x00, 0x00, 0xba, /* TPM_COMMAND_CODE */ + 0x00, 0x00, 0x00, 0x00, /* TPM_HANDLE */ + 0x00, 0x00, 0x00, 0x02, /* TPM_RESSOURCE_TYPE */ + }; + const size_t req_handle_offset = TPM_REQUEST_HEADER_LENGTH; + uint8_t request[COMMAND_BUFFER_SIZE]; + + if (pack_byte_string(request, sizeof(request), "sd", + 0, command, sizeof(command), + req_handle_offset, auth_handle)) + return TPM_LIB_ERROR; + if (oiap_session.valid && oiap_session.handle == auth_handle) + oiap_session.valid = 0; + + return tpm_sendrecv_command(request, NULL, NULL); +} + +uint32_t tpm_end_oiap(void) +{ + uint32_t err = TPM_SUCCESS; + if (oiap_session.valid) + err = tpm_terminate_auth_session(oiap_session.handle); + return err; +} + +uint32_t tpm_oiap(uint32_t *auth_handle) +{ + const uint8_t command[10] = { + 0x00, 0xc1, /* TPM_TAG */ + 0x00, 0x00, 0x00, 0x0a, /* parameter size */ + 0x00, 0x00, 0x00, 0x0a, /* TPM_COMMAND_CODE */ + }; + const size_t res_auth_handle_offset = TPM_RESPONSE_HEADER_LENGTH; + const size_t res_nonce_even_offset = TPM_RESPONSE_HEADER_LENGTH + 4; + uint8_t response[COMMAND_BUFFER_SIZE]; + size_t response_length = sizeof(response); + uint32_t err; + + if (oiap_session.valid) + tpm_terminate_auth_session(oiap_session.handle); + + err = tpm_sendrecv_command(command, response, &response_length); + if (err) + return err; + if (unpack_byte_string(response, response_length, "ds", + res_auth_handle_offset, &oiap_session.handle, + res_nonce_even_offset, &oiap_session.nonce_even, + (uint32_t)DIGEST_LENGTH)) + return TPM_LIB_ERROR; + oiap_session.valid = 1; + if (auth_handle) + *auth_handle = oiap_session.handle; + return 0; +} + +uint32_t tpm_load_key2_oiap(uint32_t parent_handle, + const void *key, size_t key_length, + const void *parent_key_usage_auth, + uint32_t *key_handle) +{ + const uint8_t command[14] = { + 0x00, 0xc2, /* TPM_TAG */ + 0x00, 0x00, 0x00, 0x00, /* parameter size */ + 0x00, 0x00, 0x00, 0x41, /* TPM_COMMAND_CODE */ + 0x00, 0x00, 0x00, 0x00, /* parent handle */ + }; + const size_t req_size_offset = 2; + const size_t req_parent_handle_offset = TPM_REQUEST_HEADER_LENGTH; + const size_t req_key_offset = TPM_REQUEST_HEADER_LENGTH + 4; + const size_t res_handle_offset = TPM_RESPONSE_HEADER_LENGTH; + uint8_t request[sizeof(command) + TPM_KEY12_MAX_LENGTH + + TPM_REQUEST_AUTH_LENGTH]; + uint8_t response[COMMAND_BUFFER_SIZE]; + size_t response_length = sizeof(response); + uint32_t err; + + if (!oiap_session.valid) { + err = tpm_oiap(NULL); + if (err) + return err; + } + if (pack_byte_string(request, sizeof(request), "sdds", + 0, command, sizeof(command), + req_size_offset, + sizeof(command) + key_length + + TPM_REQUEST_AUTH_LENGTH, + req_parent_handle_offset, parent_handle, + req_key_offset, key, key_length + )) + return TPM_LIB_ERROR; + + err = create_request_auth(request, sizeof(command) + key_length, 4, + &oiap_session, + request + sizeof(command) + key_length, + parent_key_usage_auth); + if (err) + return err; + err = tpm_sendrecv_command(request, response, &response_length); + if (err) { + if (err == TPM_AUTHFAIL) + oiap_session.valid = 0; + return err; + } + + err = verify_response_auth(0x00000041, response, + response_length - TPM_RESPONSE_AUTH_LENGTH, + 4, &oiap_session, + response + response_length - TPM_RESPONSE_AUTH_LENGTH, + parent_key_usage_auth); + if (err) + return err; + + if (key_handle) { + if (unpack_byte_string(response, response_length, "d", + res_handle_offset, key_handle)) + return TPM_LIB_ERROR; + } + + return 0; +} + +uint32_t tpm_get_pub_key_oiap(uint32_t key_handle, const void *usage_auth, + void *pubkey, size_t *pubkey_len) +{ + const uint8_t command[14] = { + 0x00, 0xc2, /* TPM_TAG */ + 0x00, 0x00, 0x00, 0x00, /* parameter size */ + 0x00, 0x00, 0x00, 0x21, /* TPM_COMMAND_CODE */ + 0x00, 0x00, 0x00, 0x00, /* key handle */ + }; + const size_t req_size_offset = 2; + const size_t req_key_handle_offset = TPM_REQUEST_HEADER_LENGTH; + const size_t res_pubkey_offset = TPM_RESPONSE_HEADER_LENGTH; + uint8_t request[sizeof(command) + TPM_REQUEST_AUTH_LENGTH]; + uint8_t response[TPM_RESPONSE_HEADER_LENGTH + TPM_PUBKEY_MAX_LENGTH + + TPM_RESPONSE_AUTH_LENGTH]; + size_t response_length = sizeof(response); + uint32_t err; + + if (!oiap_session.valid) { + err = tpm_oiap(NULL); + if (err) + return err; + } + if (pack_byte_string(request, sizeof(request), "sdd", + 0, command, sizeof(command), + req_size_offset, + (uint32_t)(sizeof(command) + + TPM_REQUEST_AUTH_LENGTH), + req_key_handle_offset, key_handle + )) + return TPM_LIB_ERROR; + err = create_request_auth(request, sizeof(command), 4, &oiap_session, + request + sizeof(command), usage_auth); + if (err) + return err; + err = tpm_sendrecv_command(request, response, &response_length); + if (err) { + if (err == TPM_AUTHFAIL) + oiap_session.valid = 0; + return err; + } + err = verify_response_auth(0x00000021, response, + response_length - TPM_RESPONSE_AUTH_LENGTH, + 0, &oiap_session, + response + response_length - TPM_RESPONSE_AUTH_LENGTH, + usage_auth); + if (err) + return err; + + if (pubkey) { + if ((response_length - TPM_RESPONSE_HEADER_LENGTH + - TPM_RESPONSE_AUTH_LENGTH) > *pubkey_len) + return TPM_LIB_ERROR; + *pubkey_len = response_length - TPM_RESPONSE_HEADER_LENGTH + - TPM_RESPONSE_AUTH_LENGTH; + memcpy(pubkey, response + res_pubkey_offset, + response_length - TPM_RESPONSE_HEADER_LENGTH + - TPM_RESPONSE_AUTH_LENGTH); + } + + return 0; +} + +#endif /* CONFIG_TPM_AUTH_SESSIONS */
From: Dirk Eibach eibach@gdsys.de
If CONFIG_RELEASE_CORE0_ONLY is set, all cores except core0 are kept in holdoff mode.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc --- Changes in v4: None Changes in v3: None Changes in v2: None
arch/powerpc/cpu/mpc85xx/mp.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index 43d4836..73c1024 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -350,7 +350,11 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); u32 devdisr; int timeout = 10; + int numcores = 1;
+#ifndef CONFIG_RELEASE_CORE0_ONLY + numcores = cpu_numcores(); +#endif whoami = in_be32(&pic->whoami); out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
@@ -363,7 +367,7 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) out_be32(&gur->devdisr, devdisr);
/* release the hounds */ - up = ((1 << cpu_numcores()) - 1); + up = ((1 << numcores) - 1); bpcr = in_be32(&ecm->eebpcr); bpcr |= (up << 24); out_be32(&ecm->eebpcr, bpcr); @@ -373,7 +377,7 @@ static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) /* wait for everyone */ while (timeout) { int i; - for (i = 0; i < cpu_numcores(); i++) { + for (i = 0; i < numcores; i++) { if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER]) cpu_up_mask |= (1 << i); };
On 04/26/2013 03:11:36 AM, Dirk Eibach wrote:
From: Dirk Eibach eibach@gdsys.de
If CONFIG_RELEASE_CORE0_ONLY is set, all cores except core0 are kept in holdoff mode.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc
Changes in v4: None Changes in v3: None Changes in v2: None
arch/powerpc/cpu/mpc85xx/mp.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-)
We already have an mp_holdoff hwconfig.
-Scott
From: Reinhard Pfau pfau@gdsys.de
if alen is 0: no longer start a write cycle before reading data.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc Signed-off-by: Reinhard Pfau reinhard.pfau@gdsys.cc
--- Changes in v4: None Changes in v3: None Changes in v2: - whitespace fixes
drivers/i2c/fsl_i2c.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 1c7265d..ab86bef 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -383,13 +383,16 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) int i = -1; /* signal error */ u8 *a = (u8*)&addr;
- if (i2c_wait4bus() >= 0 + if (i2c_wait4bus() < 0) + return -1; + + if (alen > 0 && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 && __i2c_write(&a[4 - alen], alen) == alen) i = 0; /* No error so far */
- if (length - && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) + if (length && + i2c_write_addr(dev, I2C_READ_BIT, alen ? 1 : 0) != 0) i = __i2c_read(data, length);
writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
Dirk Eibach <dirk.eibach <at> gdsys.cc> writes:
From: Reinhard Pfau <pfau <at> gdsys.de>
if alen is 0: no longer start a write cycle before reading data.
Signed-off-by: Dirk Eibach <dirk.eibach <at> gdsys.cc> Signed-off-by: Reinhard Pfau <reinhard.pfau <at> gdsys.cc>
Since I saw no response to my previous email, http://article.gmane.org/gmane.comp.boot-loaders.u-boot/159456, I looked a little more closely.
Changes in v4: None Changes in v3: None Changes in v2:
- whitespace fixes
drivers/i2c/fsl_i2c.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 1c7265d..ab86bef 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c <at> <at> -383,13 +383,16 <at> <at> i2c_read(u8 dev, uint addr, int
alen, u8 *data, int length)
int i = -1; /* signal error */ u8 *a = (u8*)&addr;
- if (i2c_wait4bus() >= 0
- if (i2c_wait4bus() < 0)
return -1;- if (alen > 0
<snip>
On visual inspection of $(UBOOT)/drivers/i2c/fsl_i2c.c, these proposed changes will cause i2c_probe(), in the same source file, to fail.
i2c_probe() calls i2c_read() with alen=0.
Unless I'm missing something.
Jim
From: Dirk Eibach eibach@gdsys.de
Add support for Atmel TPM devices with two wire interface.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc Signed-off-by: Reinhard Pfau reinhard.pfau@gdsys.cc --- Changes in v4: None Changes in v3: None Changes in v2: None
README | 6 ++ drivers/tpm/Makefile | 1 + drivers/tpm/atmel_twi_tpm.c | 119 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 126 insertions(+), 0 deletions(-) create mode 100644 drivers/tpm/atmel_twi_tpm.c
diff --git a/README b/README index 58b2ee5..2053931 100644 --- a/README +++ b/README @@ -1201,6 +1201,12 @@ The following options need to be configured: If this option is set, the driver enables cache flush.
- TPM Support: + Only one TPM device per system is supported at this time. + So enable only one of the supported devices. + + CONFIG_ATMEL_TWI_TPM + Support for Atmel TWI TPM device. Requires I2C support. + CONFIG_GENERIC_LPC_TPM Support for generic parallel port TPM devices. Only one device per system is supported at this time. diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile index e8c159c..5c8f246 100644 --- a/drivers/tpm/Makefile +++ b/drivers/tpm/Makefile @@ -28,6 +28,7 @@ $(shell mkdir -p $(obj)slb9635_i2c) COBJS-$(CONFIG_GENERIC_LPC_TPM) = generic_lpc_tpm.o COBJS-$(CONFIG_INFINEON_TPM_I2C) += tis_i2c.o slb9635_i2c/tpm.o COBJS-$(CONFIG_INFINEON_TPM_I2C) += slb9635_i2c/tpm_tis_i2c.o +COBJS-$(CONFIG_ATMEL_TWI_TPM) = atmel_twi_tpm.o
COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/tpm/atmel_twi_tpm.c b/drivers/tpm/atmel_twi_tpm.c new file mode 100644 index 0000000..1fa626f --- /dev/null +++ b/drivers/tpm/atmel_twi_tpm.c @@ -0,0 +1,119 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <tpm.h> +#include <i2c.h> +#include <asm/unaligned.h> + +#undef DEBUG_ATMEL_TWI_TPM +#ifdef DEBUG +#define DEBUG_ATMEL_TWI_TPM +#endif + + +/* + * tis_init() + * + * Initialize the TPM device. Returns 0 on success or -1 on + * failure (in case device probing did not succeed). + */ +int tis_init(void) +{ + return 0; +} + +/* + * tis_open() + * + * Requests access to locality 0 for the caller. After all commands have been + * completed the caller is supposed to call tis_close(). + * + * Returns 0 on success, -1 on failure. + */ +int tis_open(void) +{ + return 0; +} + +/* + * tis_close() + * + * terminate the currect session with the TPM by releasing the locked + * locality. Returns 0 on success of -1 on failure (in case lock + * removal did not succeed). + */ +int tis_close(void) +{ + return 0; +} + +/* + * tis_sendrecv() + * + * Send the requested data to the TPM and then try to get its response + * + * @sendbuf - buffer of the data to send + * @send_size size of the data to send + * @recvbuf - memory to save the response to + * @recv_len - pointer to the size of the response buffer + * + * Returns 0 on success (and places the number of response bytes at recv_len) + * or -1 on failure. + */ +int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, + size_t *recv_len) +{ + int res; + +#ifdef DEBUG_ATMEL_TWI_TPM + memset(recvbuf, 0xcc, *recv_len); + printf("send to TPM (%d bytes, recv_len=%d):\n", send_size, *recv_len); + print_buffer(0, (void *)sendbuf, 1, send_size, 0); +#endif + + res = i2c_write(0x29, 0, 0, (uchar *)sendbuf, send_size); + if (res) { + printf("i2c_write returned %d\n", res); + return -1; + } + + mdelay(1); + /* TODO timeout for the loop?! */ + while ((res = i2c_read(0x29, 0, 0, recvbuf, 10))) + udelay(100); + if (!res) { + *recv_len = get_unaligned_be32(recvbuf + 2); + if (*recv_len > 10) + res = i2c_read(0x29, 0, 0, recvbuf, *recv_len); + } + if (res) { + printf("i2c_read returned %d (rlen=%d)\n", res, *recv_len); +#ifdef DEBUG_ATMEL_TWI_TPM + print_buffer(0, recvbuf, 1, *recv_len, 0); +#endif + } + +#ifdef DEBUG_ATMEL_TWI_TPM + if (!res) { + printf("read from TPM (%d bytes):\n", *recv_len); + print_buffer(0, recvbuf, 1, *recv_len, 0); + } +#endif + + return res; +}
From: Dirk Eibach eibach@gdsys.de
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc
--- Changes in v4: - consider CONFIG_CMD_BOOTM for all architectures
Changes in v3: None Changes in v2: None
arch/arm/lib/Makefile | 2 +- arch/avr32/lib/Makefile | 2 +- arch/m68k/lib/Makefile | 2 +- arch/microblaze/lib/Makefile | 2 +- arch/mips/lib/Makefile | 4 ++-- arch/nds32/lib/Makefile | 3 ++- arch/nios2/lib/Makefile | 2 +- arch/openrisc/lib/Makefile | 2 +- arch/powerpc/lib/Makefile | 2 +- arch/sh/lib/Makefile | 2 +- arch/sparc/lib/Makefile | 3 ++- arch/x86/lib/Makefile | 2 +- 12 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 6ae161a..68693e4 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -44,7 +44,7 @@ COBJS-y += board.o endif COBJS-y += bss.o
-COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o diff --git a/arch/avr32/lib/Makefile b/arch/avr32/lib/Makefile index ee6d067..fce8af3 100644 --- a/arch/avr32/lib/Makefile +++ b/arch/avr32/lib/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)lib$(ARCH).o SOBJS-y += memset.o
COBJS-y += board.o -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += interrupts.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index a8d6cd5..5722b67 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -28,7 +28,7 @@ LIB = $(obj)lib$(ARCH).o SOBJS-y +=
COBJS-y += board.o -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += cache.o COBJS-y += interrupts.o COBJS-y += time.o diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index 8d7febd..a40e8d4 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -28,7 +28,7 @@ LIB = $(obj)lib$(ARCH).o SOBJS-y +=
COBJS-y += board.o -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += muldi3.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 967e98a..b6ded54 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -36,9 +36,9 @@ SOBJS-y +=
COBJS-y += board.o ifeq ($(CONFIG_QEMU_MIPS),y) -COBJS-y += bootm_qemu_mips.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm_qemu_mips.o else -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o endif
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/nds32/lib/Makefile b/arch/nds32/lib/Makefile index 581a2e7..705e1ff 100644 --- a/arch/nds32/lib/Makefile +++ b/arch/nds32/lib/Makefile @@ -29,7 +29,8 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).o
-OBJS := board.o bootm.o cache.o interrupts.o +OBJS := board.o cache.o interrupts.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o
all: $(LIB)
diff --git a/arch/nios2/lib/Makefile b/arch/nios2/lib/Makefile index 443f99e..f33f96a 100644 --- a/arch/nios2/lib/Makefile +++ b/arch/nios2/lib/Makefile @@ -28,7 +28,7 @@ LIB = $(obj)lib$(ARCH).o SOBJS-y += cache.o
COBJS-y += board.o -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += libgcc.o COBJS-y += time.o
diff --git a/arch/openrisc/lib/Makefile b/arch/openrisc/lib/Makefile index db3c657..ab822f4 100644 --- a/arch/openrisc/lib/Makefile +++ b/arch/openrisc/lib/Makefile @@ -28,7 +28,7 @@ LIB = $(obj)lib$(ARCH).o SOBJS-y +=
COBJS-y += board.o -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += timer.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 59c723b..8c4920b 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -63,7 +63,7 @@ ifndef CONFIG_SYS_GENERIC_BOARD COBJS-y += board.o endif endif -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += cache.o COBJS-y += extable.o COBJS-y += interrupts.o diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index 256811a..3d4eb53 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -33,7 +33,7 @@ GLSOBJS += lshrdi3.o GLSOBJS += movmem.o
COBJS-y += board.o -COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o ifeq ($(CONFIG_SH2),y) COBJS-y += time_sh2.o else diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 7133ef1..aec29b3 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -27,7 +27,8 @@ LIB = $(obj)lib$(ARCH).o
SOBJS =
-COBJS = board.o cache.o interrupts.o time.o bootm.o +COBJS = board.o cache.o interrupts.o time.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index ee89354..7d67691 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -29,7 +29,7 @@ ifeq ($(CONFIG_SYS_GENERIC_BOARD),) COBJS-y += board.o endif
-COBJS-y += bootm.o +COBJS-$(CONFIG_CMD_BOOTM) += bootm.o COBJS-y += cmd_boot.o COBJS-y += gcc.o COBJS-y += init_helpers.o
Dear Dirk Eibach,
In message 1366963900-2784-7-git-send-email-dirk.eibach@gdsys.cc you wrote:
From: Dirk Eibach eibach@gdsys.de
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc
Changes in v4:
- consider CONFIG_CMD_BOOTM for all architectures
On which boards has this been tested?
Which of these boards actually do not define CONFIG_CMD_BOOTM?
Best regards,
Wolfgang Denk
Hello Wolfgang,
In message 1366963900-2784-7-git-send-email-dirk.eibach@gdsys.cc you wrote:
From: Dirk Eibach eibach@gdsys.de
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc
Changes in v4:
- consider CONFIG_CMD_BOOTM for all architectures
On which boards has this been tested?
MAKEALL was done for ppc4xx and mpc85xx. For anything else I don't have toolchains. Run checks were done on our controlcenterd hardware.
Which of these boards actually do not define CONFIG_CMD_BOOTM?
controlcenterd has configruations with and without CONFIG_CMD_BOOTM.
Cheers Dirk
From: Dirk Eibach eibach@gdsys.de
The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC. It boots from SPI-Flash but can be configured to boot from SD-card for factory programming and testing. On board peripherals include: - 2x GbE - Lattice ECP3 FPGA connected via PCIe - mSATA RAID1 - USB host - DisplayPort video output - Atmel TPM
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc Signed-off-by: Reinhard Pfau reinhard.pfau@gdsys.cc
--- Changes in v4: None Changes in v3: - fix email addresses
Changes in v2: - configuration for SPI builds was missing - whitespace fixes
board/gdsys/common/Makefile | 1 + board/gdsys/common/dp501.c | 107 +++ board/gdsys/common/dp501.h | 30 + board/gdsys/p1022/Makefile | 37 + board/gdsys/p1022/controlcenterd-id.c | 1205 +++++++++++++++++++++++++++++++++ board/gdsys/p1022/controlcenterd-id.h | 29 + board/gdsys/p1022/controlcenterd.c | 447 ++++++++++++ board/gdsys/p1022/ddr.c | 71 ++ board/gdsys/p1022/diu.c | 87 +++ board/gdsys/p1022/law.c | 20 + board/gdsys/p1022/sdhc_boot.c | 63 ++ board/gdsys/p1022/tlb.c | 77 +++ boards.cfg | 7 + include/configs/controlcenterd.h | 525 ++++++++++++++ 14 files changed, 2706 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/common/dp501.c create mode 100644 board/gdsys/common/dp501.h create mode 100644 board/gdsys/p1022/Makefile create mode 100644 board/gdsys/p1022/controlcenterd-id.c create mode 100644 board/gdsys/p1022/controlcenterd-id.h create mode 100644 board/gdsys/p1022/controlcenterd.c create mode 100644 board/gdsys/p1022/ddr.c create mode 100644 board/gdsys/p1022/diu.c create mode 100644 board/gdsys/p1022/law.c create mode 100644 board/gdsys/p1022/sdhc_boot.c create mode 100644 board/gdsys/p1022/tlb.c create mode 100644 include/configs/controlcenterd.h
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 05dd65d..13a9c5d 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_IO) += miiphybb.o COBJS-$(CONFIG_IO64) += miiphybb.o COBJS-$(CONFIG_IOCON) += osd.o COBJS-$(CONFIG_DLVISION_10G) += osd.o +COBJS-$(CONFIG_CONTROLCENTERD) += dp501.o
COBJS := $(COBJS-y) SOBJS = diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c new file mode 100644 index 0000000..9aa4e3f --- /dev/null +++ b/board/gdsys/common/dp501.c @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> +#include <i2c.h> + +static void dp501_setbits(u8 addr, u8 reg, u8 mask) +{ + u8 val; + + val = i2c_reg_read(addr, reg); + setbits_8(&val, mask); + i2c_reg_write(addr, reg, val); +} + +static void dp501_clrbits(u8 addr, u8 reg, u8 mask) +{ + u8 val; + + val = i2c_reg_read(addr, reg); + clrbits_8(&val, mask); + i2c_reg_write(addr, reg, val); +} + +static int dp501_detect_cable_adapter(u8 addr) +{ + u8 val = i2c_reg_read(addr, 0x00); + + return !(val & 0x04); +} + +static void dp501_link_training(u8 addr) +{ + u8 val; + + val = i2c_reg_read(addr, 0x51); + i2c_reg_write(addr, 0x5d, val); /* set link_bw */ + val = i2c_reg_read(addr, 0x52); + i2c_reg_write(addr, 0x5e, val); /* set lane_cnt */ + val = i2c_reg_read(addr, 0x53); + i2c_reg_write(addr, 0x5c, val); /* set downspread_ctl */ + + i2c_reg_write(addr, 0x5f, 0x0d); /* start training */ +} + +void dp501_powerup(u8 addr) +{ + dp501_clrbits(addr, 0x0a, 0x30); /* power on encoder */ + i2c_reg_write(addr, 0x27, 0x30); /* Hardware auto detect DVO timing */ + dp501_setbits(addr, 0x72, 0x80); /* DPCD read enable */ + dp501_setbits(addr, 0x30, 0x20); /* RS polynomial select */ + i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */ + dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */ + dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */ + i2c_reg_write(addr, 0x24, 0xc0); /* SDR mode 0, ext. H/VSYNC */ + i2c_reg_write(addr + 2, 0x24, 0x02); /* clock input single ended */ + + if (dp501_detect_cable_adapter(addr)) { + printf("DVI/HDMI cable adapter detected\n"); + i2c_reg_write(addr, 0x5e, 0x04); /* enable 4 channel */ + dp501_clrbits(addr, 0x00, 0x08); /* DVI/HDMI HDCP operation */ + } else { + printf("no DVI/HDMI cable adapter detected\n"); + i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */ + i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */ + i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */ + i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */ + i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */ + i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */ + dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */ + i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */ + i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */ + i2c_reg_write(addr, 0x87, 0x70); /* set retry counter as 7 */ + dp501_setbits(addr, 0x00, 0x08); /* for DP HDCP operation */ + + dp501_link_training(addr); + } +} + +void dp501_powerdown(u8 addr) +{ + dp501_setbits(addr, 0x0a, 0x30); /* power down encoder, standby mode */ +} diff --git a/board/gdsys/common/dp501.h b/board/gdsys/common/dp501.h new file mode 100644 index 0000000..8dc3215 --- /dev/null +++ b/board/gdsys/common/dp501.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _DP501_H_ +#define _DP501_H_ + +void dp501_powerup(u8 addr); +void dp501_powerdown(u8 addr); + +#endif diff --git a/board/gdsys/p1022/Makefile b/board/gdsys/p1022/Makefile new file mode 100644 index 0000000..17f602f --- /dev/null +++ b/board/gdsys/p1022/Makefile @@ -0,0 +1,37 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +# COBJS-y += $(BOARD).o +COBJS-y += law.o +COBJS-y += ddr.o +COBJS-y += tlb.o +COBJS-y += sdhc_boot.o +COBJS-$(CONFIG_CONTROLCENTERD) += controlcenterd.o controlcenterd-id.o + +COBJS-$(CONFIG_FSL_DIU_FB) += diu.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c new file mode 100644 index 0000000..0698b27 --- /dev/null +++ b/board/gdsys/p1022/controlcenterd-id.c @@ -0,0 +1,1205 @@ +/* + * (C) Copyright 2013 + * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* TODO: some more #ifdef's to avoid unneeded code for stage 1 / stage 2 */ + +#ifdef CCDM_ID_DEBUG +#define DEBUG +#endif + +#include <common.h> +#include <malloc.h> +#include <fs.h> +#include <i2c.h> +#include <mmc.h> +#include <tpm.h> +#include <sha1.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <pca9698.h> + +#undef CCDM_FIRST_STAGE +#undef CCDM_SECOND_STAGE +#undef CCDM_AUTO_FIRST_STAGE + +#ifdef CONFIG_DEVELOP +#define CCDM_DEVELOP +#endif + +#ifdef CONFIG_TRAILBLAZER +#define CCDM_FIRST_STAGE +#undef CCDM_SECOND_STAGE +#else +#undef CCDM_FIRST_STAGE +#define CCDM_SECOND_STAGE +#endif + +#if defined(CCDM_DEVELOP) && defined(CCDM_SECOND_STAGE) && \ + !defined(CCCM_FIRST_STAGE) +#define CCDM_AUTO_FIRST_STAGE +#endif + +/* enums from TCG specs */ +enum { + /* capability areas */ + TPM_CAP_NV_INDEX = 0x00000011, + TPM_CAP_HANDLE = 0x00000014, + /* resource types */ + TPM_RT_KEY = 0x00000001, +}; + +/* CCDM specific contants */ +enum { + /* NV indices */ + NV_COMMON_DATA_INDEX = 0x40000001, + /* magics for key blob chains */ + MAGIC_KEY_PROGRAM = 0x68726500, + MAGIC_HMAC = 0x68616300, + MAGIC_END_OF_CHAIN = 0x00000000, + /* sizes */ + NV_COMMON_DATA_MIN_SIZE = 3 * sizeof(uint64_t) + 2 * sizeof(uint16_t), +}; + +/* other constants */ +enum { + ESDHC_BOOT_IMAGE_SIG_OFS = 0x40, + ESDHC_BOOT_IMAGE_SIZE_OFS = 0x48, + ESDHC_BOOT_IMAGE_ADDR_OFS = 0x50, + ESDHC_BOOT_IMAGE_TARGET_OFS = 0x58, + ESDHC_BOOT_IMAGE_ENTRY_OFS = 0x60, +}; + +struct key_program { + uint32_t magic; + uint32_t code_crc; + uint32_t code_size; + uint8_t code[]; +}; + +struct h_reg { + bool valid; + uint8_t digest[20]; +}; + + +enum access_mode { + HREG_NONE = 0, + HREG_RD = 1, + HREG_WR = 2, + HREG_RDWR = 3, +}; + +/* register constants */ +enum { + FIX_HREG_DEVICE_ID_HASH = 0, + FIX_HREG_SELF_HASH = 1, + FIX_HREG_STAGE2_HASH = 2, + FIX_HREG_VENDOR = 3, + COUNT_FIX_HREGS +}; + + +/* hre opcodes */ +enum { + /* opcodes w/o data */ + HRE_NOP = 0x00, + HRE_SYNC = HRE_NOP, + HRE_CHECK0 = 0x01, + /* opcodes w/o data, w/ sync dst */ + /* opcodes w/ data */ + HRE_LOAD = 0x81, + /* opcodes w/data, w/sync dst */ + HRE_XOR = 0xC1, + HRE_AND = 0xC2, + HRE_OR = 0xC3, + HRE_EXTEND = 0xC4, + HRE_LOADKEY = 0xC5, +}; + +/* hre errors */ +enum { + HRE_E_OK = 0, + HRE_E_TPM_FAILURE, + HRE_E_INVALID_HREG, +}; + +static uint64_t device_id; +static uint64_t device_cl; +static uint64_t device_type; + +static uint32_t platform_key_handle; + +static void(*bl2_entry)(void); + +static struct h_reg pcr_hregs[24]; +static struct h_reg fix_hregs[COUNT_FIX_HREGS]; +static struct h_reg var_hregs[8]; +static uint32_t hre_tpm_err; +static int hre_err = HRE_E_OK; + +#define IS_PCR_HREG(spec) ((spec) & 0x20) +#define IS_FIX_HREG(spec) (((spec) & 0x38) == 0x08) +#define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10) +#define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7)) + + +static const uint8_t prg_stage1_prepare[] = { + 0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */ + 0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */ + 0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */ + 0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */ + 0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */ + 0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */ + 0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */ + 0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */ + 0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */ + 0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */ +}; + +static const uint8_t prg_stage2_prepare[] = { + 0x00, 0x80, 0x00, 0x00, /* opcode: SYNC PCR0 */ + 0x00, 0x84, 0x00, 0x00, /* opcode: SYNC PCR1 */ + 0x00, 0x88, 0x00, 0x00, /* opcode: SYNC PCR2 */ + 0x00, 0x8c, 0x00, 0x00, /* opcode: SYNC PCR3 */ + 0x00, 0x90, 0x00, 0x00, /* opcode: SYNC PCR4 */ +}; + +static const uint8_t prg_stage2_success[] = { + 0x81, 0x02, 0x40, 0x14, /* opcode: LOAD PCR4, #<20B data> */ + 0x48, 0xfd, 0x95, 0x17, 0xe7, 0x54, 0x6b, 0x68, /* data */ + 0x92, 0x31, 0x18, 0x05, 0xf8, 0x58, 0x58, 0x3c, /* data */ + 0xe4, 0xd2, 0x81, 0xe0, /* data */ +}; + +static const uint8_t prg_stage_fail[] = { + 0x81, 0x01, 0x00, 0x14, /* opcode: LOAD v0, #<20B data> */ + 0xc0, 0x32, 0xad, 0xc1, 0xff, 0x62, 0x9c, 0x9b, /* data */ + 0x66, 0xf2, 0x27, 0x49, 0xad, 0x66, 0x7e, 0x6b, /* data */ + 0xea, 0xdf, 0x14, 0x4b, /* data */ + 0x81, 0x42, 0x30, 0x00, /* opcode: LOAD PCR3, v0 */ + 0x81, 0x42, 0x40, 0x00, /* opcode: LOAD PCR4, v0 */ +}; + +static const uint8_t vendor[] = "Guntermann & Drunck"; + + +/** + * @brief read a bunch of data from MMC into memory. + * + * @param mmc pointer to the mmc structure to use. + * @param src offset where the data starts on MMC/SD device (in bytes). + * @param dst pointer to the location where the read data should be stored. + * @param size number of bytes to read from the MMC/SD device. + * @return number of bytes read or -1 on error. + */ +static int ccdm_mmc_read(struct mmc *mmc, u64 src, u8 *dst, int size) +{ + int result = 0; + u32 blk_len, ofs; + ulong block_no, n, cnt; + u8 *tmp_buf = NULL; + + if (size <= 0) + goto end; + + blk_len = mmc->read_bl_len; + tmp_buf = malloc(blk_len); + if (!tmp_buf) + goto failure; + block_no = src / blk_len; + ofs = src % blk_len; + + if (ofs) { + n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no++, 1, + tmp_buf); + if (!n) + goto failure; + result = min(size, blk_len - ofs); + memcpy(dst, tmp_buf + ofs, result); + dst += result; + size -= result; + } + cnt = size / blk_len; + if (cnt) { + n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no, cnt, + dst); + if (n != cnt) + goto failure; + size -= cnt * blk_len; + result += cnt * blk_len; + dst += cnt * blk_len; + block_no += cnt; + } + if (size) { + n = mmc->block_dev.block_read(mmc->block_dev.dev, block_no++, 1, + tmp_buf); + if (!n) + goto failure; + memcpy(dst, tmp_buf, size); + result += size; + } + goto end; +failure: + result = -1; +end: + if (tmp_buf) + free(tmp_buf); + return result; +} + +/** + * @brief returns a location where the 2nd stage bootloader can be(/ is) placed. + * + * @return pointer to the location for/of the 2nd stage bootloader + */ +static u8 *get_2nd_stage_bl_location(ulong target_addr) +{ + ulong addr; +#ifdef CCDM_SECOND_STAGE + addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR); +#else + addr = target_addr; +#endif + return (u8 *)(addr); +} + + +#ifdef CCDM_SECOND_STAGE +/** + * @brief returns a location where the image can be(/ is) placed. + * + * @return pointer to the location for/of the image + */ +static u8 *get_image_location(void) +{ + ulong addr; + /* TODO use other area? */ + addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR); + return (u8 *)(addr); +} +#endif + +/** + * @brief get the size of a given (TPM) NV area + * @param index NV index of the area to get size for + * @param size pointer to the size + * @return 0 on success, != 0 on error + */ +static int get_tpm_nv_size(uint32_t index, uint32_t *size) +{ + uint32_t err; + uint8_t info[72]; + uint8_t *ptr; + uint16_t v16; + + err = tpm_get_capability(TPM_CAP_NV_INDEX, index, + info, sizeof(info)); + if (err) { + printf("tpm_get_capability(CAP_NV_INDEX, %08x) failed: %u\n", + index, err); + return 1; + } + + /* skip tag and nvIndex */ + ptr = info + 6; + /* skip 2 pcr info fields */ + v16 = get_unaligned_be16(ptr); + ptr += 2 + v16 + 1 + 20; + v16 = get_unaligned_be16(ptr); + ptr += 2 + v16 + 1 + 20; + /* skip permission and flags */ + ptr += 6 + 3; + + *size = get_unaligned_be32(ptr); + return 0; +} + +/** + * @brief search for a key by usage auth and pub key hash. + * @param auth usage auth of the key to search for + * @param pubkey_digest (SHA1) hash of the pub key structure of the key + * @param[out] handle the handle of the key iff found + * @return 0 if key was found in TPM; != 0 if not. + */ +static int find_key(const uint8_t auth[20], const uint8_t pubkey_digest[20], + uint32_t *handle) +{ + uint16_t key_count; + uint32_t key_handles[10]; + uint8_t buf[288]; + uint8_t *ptr; + uint32_t err; + uint8_t digest[20]; + size_t buf_len; + unsigned int i; + + /* fetch list of already loaded keys in the TPM */ + err = tpm_get_capability(TPM_CAP_HANDLE, TPM_RT_KEY, buf, sizeof(buf)); + if (err) + return -1; + key_count = get_unaligned_be16(buf); + ptr = buf + 2; + for (i = 0; i < key_count; ++i, ptr += 4) + key_handles[i] = get_unaligned_be32(ptr); + + /* now search a(/ the) key which we can access with the given auth */ + for (i = 0; i < key_count; ++i) { + buf_len = sizeof(buf); + err = tpm_get_pub_key_oiap(key_handles[i], auth, buf, &buf_len); + if (err && err != TPM_AUTHFAIL) + return -1; + if (err) + continue; + sha1_csum(buf, buf_len, digest); + if (!memcmp(digest, pubkey_digest, 20)) { + *handle = key_handles[i]; + return 0; + } + } + return 1; +} + +/** + * @brief read CCDM common data from TPM NV + * @return 0 if CCDM common data was found and read, !=0 if something failed. + */ +static int read_common_data(void) +{ + uint32_t size; + uint32_t err; + uint8_t buf[256]; + sha1_context ctx; + + if (get_tpm_nv_size(NV_COMMON_DATA_INDEX, &size) || + size < NV_COMMON_DATA_MIN_SIZE) + return 1; + err = tpm_nv_read_value(NV_COMMON_DATA_INDEX, + buf, min(sizeof(buf), size)); + if (err) { + printf("tpm_nv_read_value() failed: %u\n", err); + return 1; + } + + device_id = get_unaligned_be64(buf); + device_cl = get_unaligned_be64(buf + 8); + device_type = get_unaligned_be64(buf + 16); + + sha1_starts(&ctx); + sha1_update(&ctx, buf, 24); + sha1_finish(&ctx, fix_hregs[FIX_HREG_DEVICE_ID_HASH].digest); + fix_hregs[FIX_HREG_DEVICE_ID_HASH].valid = true; + + platform_key_handle = get_unaligned_be32(buf + 24); + + return 0; +} + +/** + * @brief compute hash of bootloader itself. + * @param[out] dst hash register where the hash should be stored + * @return 0 on success, != 0 on failure. + * + * @note MUST be called at a time where the boot loader is accessible at the + * configured location (; so take care when code is reallocated). + */ +static int compute_self_hash(struct h_reg *dst) +{ + sha1_csum((const uint8_t *)CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_LEN, dst->digest); + dst->valid = true; + return 0; +} + +int ccdm_compute_self_hash(void) +{ + if (!fix_hregs[FIX_HREG_SELF_HASH].valid) + compute_self_hash(&fix_hregs[FIX_HREG_SELF_HASH]); + return 0; +} + +/** + * @brief compute the hash of the 2nd stage boot loader (on SD card) + * @param[out] dst hash register to store the computed hash + * @return 0 on success, != 0 on failure + * + * Determines the size and location of the 2nd stage boot loader on SD card, + * loads the 2nd stage boot loader and computes the (SHA1) hash value. + * Within the 1st stage boot loader, the 2nd stage boot loader is loaded at + * the desired memory location and the variable @a bl2_entry is set. + * + * @note This sets the variable @a bl2_entry to the entry point when the + * 2nd stage boot loader is loaded at its configured memory location. + */ +static int compute_second_stage_hash(struct h_reg *dst) +{ + int result = 0; + u32 code_len, code_offset, target_addr, exec_entry; + struct mmc *mmc; + u8 *load_addr = NULL; + u8 buf[128]; + + mmc = find_mmc_device(0); + if (!mmc) + goto failure; + mmc_init(mmc); + + if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) < 0) + goto failure; + + code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS); + code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS); + target_addr = *(u32 *)(buf + ESDHC_BOOT_IMAGE_TARGET_OFS); + exec_entry = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ENTRY_OFS); + + load_addr = get_2nd_stage_bl_location(target_addr); + if (load_addr == (u8 *)target_addr) + bl2_entry = (void(*)(void))exec_entry; + + if (ccdm_mmc_read(mmc, code_offset, load_addr, code_len) < 0) + goto failure; + + sha1_csum(load_addr, code_len, dst->digest); + dst->valid = true; + + goto end; +failure: + result = 1; + bl2_entry = NULL; +end: + return result; +} + +/** + * @brief get pointer to hash register by specification + * @param spec specification of a hash register + * @return pointer to hash register or NULL if @a spec does not qualify a + * valid hash register; NULL else. + */ +static struct h_reg *get_hreg(uint8_t spec) +{ + uint8_t idx; + + idx = HREG_IDX(spec); + if (IS_FIX_HREG(spec)) { + if (idx < ARRAY_SIZE(fix_hregs)) + return fix_hregs + idx; + hre_err = HRE_E_INVALID_HREG; + } else if (IS_PCR_HREG(spec)) { + if (idx < ARRAY_SIZE(pcr_hregs)) + return pcr_hregs + idx; + hre_err = HRE_E_INVALID_HREG; + } else if (IS_VAR_HREG(spec)) { + if (idx < ARRAY_SIZE(var_hregs)) + return var_hregs + idx; + hre_err = HRE_E_INVALID_HREG; + } + return NULL; +} + +/** + * @brief get pointer of a hash register by specification and usage. + * @param spec specification of a hash register + * @param mode access mode (read or write or read/write) + * @return pointer to hash register if found and valid; NULL else. + * + * This func uses @a get_reg() to determine the hash register for a given spec. + * If a register is found it is validated according to the desired access mode. + * The value of automatic registers (PCR register and fixed registers) is + * loaded or computed on read access. + */ +static struct h_reg *access_hreg(uint8_t spec, enum access_mode mode) +{ + struct h_reg *result; + + result = get_hreg(spec); + if (!result) + return NULL; + + if (mode & HREG_WR) { + if (IS_FIX_HREG(spec)) { + hre_err = HRE_E_INVALID_HREG; + return NULL; + } + } + if (mode & HREG_RD) { + if (!result->valid) { + if (IS_PCR_HREG(spec)) { + hre_tpm_err = tpm_pcr_read(HREG_IDX(spec), + result->digest, 20); + result->valid = (hre_tpm_err == TPM_SUCCESS); + } else if (IS_FIX_HREG(spec)) { + switch (HREG_IDX(spec)) { + case FIX_HREG_DEVICE_ID_HASH: + read_common_data(); + break; + case FIX_HREG_SELF_HASH: + ccdm_compute_self_hash(); + break; + case FIX_HREG_STAGE2_HASH: + compute_second_stage_hash(result); + break; + case FIX_HREG_VENDOR: + memcpy(result->digest, vendor, 20); + result->valid = true; + break; + } + } else { + result->valid = true; + } + } + if (!result->valid) { + hre_err = HRE_E_INVALID_HREG; + return NULL; + } + } + + return result; +} + +static void *compute_and(void *_dst, const void *_src, size_t n) +{ + uint8_t *dst = _dst; + const uint8_t *src = _src; + size_t i; + for (i = n; i-- > 0; ) + *dst++ &= *src++; + return _dst; +} + +static void *compute_or(void *_dst, const void *_src, size_t n) +{ + uint8_t *dst = _dst; + const uint8_t *src = _src; + size_t i; + for (i = n; i-- > 0; ) + *dst++ |= *src++; + return _dst; +} + +static void *compute_xor(void *_dst, const void *_src, size_t n) +{ + uint8_t *dst = _dst; + const uint8_t *src = _src; + size_t i; + for (i = n; i-- > 0; ) + *dst++ ^= *src++; + return _dst; +} + +static void *compute_extend(void *_dst, const void *_src, size_t n) +{ + uint8_t digest[20]; + sha1_context ctx; + sha1_starts(&ctx); + sha1_update(&ctx, _dst, n); + sha1_update(&ctx, _src, n); + sha1_finish(&ctx, digest); + memcpy(_dst, digest, min(n, sizeof(digest))); + return _dst; +} + +static int hre_op_loadkey(struct h_reg *src_reg, struct h_reg *dst_reg, + const void *key, size_t key_size) +{ + uint32_t parent_handle; + uint32_t key_handle; + + if (!src_reg || !dst_reg || !src_reg->valid || !dst_reg->valid) + return -1; + if (find_key(src_reg->digest, dst_reg->digest, &parent_handle)) + return -1; + hre_tpm_err = tpm_load_key2_oiap(parent_handle, key, key_size, + src_reg->digest, &key_handle); + if (hre_tpm_err) { + hre_err = HRE_E_TPM_FAILURE; + return -1; + } + /* TODO remember key handle somehow? */ + return 0; +} + +/** + * @brief executes the next opcode on the hash register engine. + * @param[in,out] ip pointer to the opcode (instruction pointer) + * @param[in,out] code_size (remaining) size of the code + * @return new instruction pointer on success, NULL on error. + */ +static const uint8_t *hre_execute_op(const uint8_t **ip, size_t *code_size) +{ + bool dst_modified = false; + uint32_t ins; + uint8_t opcode; + uint8_t src_spec; + uint8_t dst_spec; + uint16_t data_size; + struct h_reg *src_reg, *dst_reg; + uint8_t buf[20]; + const uint8_t *src_buf, *data; + uint8_t *ptr; + int i; + void * (*bin_func)(void *, const void *, size_t); + + if (*code_size < 4) + return NULL; + + ins = get_unaligned_be32(*ip); + opcode = **ip; + data = *ip + 4; + src_spec = (ins >> 18) & 0x3f; + dst_spec = (ins >> 12) & 0x3f; + data_size = (ins & 0x7ff); + + debug("HRE: ins=%08x (op=%02x, s=%02x, d=%02x, L=%d)\n", ins, + opcode, src_spec, dst_spec, data_size); + + if ((opcode & 0x80) && (data_size + 4) > *code_size) + return NULL; + + src_reg = access_hreg(src_spec, HREG_RD); + if (hre_err || hre_tpm_err) + return NULL; + dst_reg = access_hreg(dst_spec, (opcode & 0x40) ? HREG_RDWR : HREG_WR); + if (hre_err || hre_tpm_err) + return NULL; + + switch (opcode) { + case HRE_NOP: + goto end; + case HRE_CHECK0: + if (src_reg) { + for (i = 0; i < 20; ++i) + if (src_reg->digest[i]) + return NULL; + } + break; + case HRE_LOAD: + bin_func = memcpy; + goto do_bin_func; + case HRE_XOR: + bin_func = compute_xor; + goto do_bin_func; + case HRE_AND: + bin_func = compute_and; + goto do_bin_func; + case HRE_OR: + bin_func = compute_or; + goto do_bin_func; + case HRE_EXTEND: + bin_func = compute_extend; +do_bin_func: + if (!dst_reg) + return NULL; + if (src_reg) { + src_buf = src_reg->digest; + } else { + if (!data_size) { + memset(buf, 0, 20); + src_buf = buf; + } else if (data_size == 1) { + memset(buf, *data, 20); + src_buf = buf; + } else if (data_size >= 20) { + src_buf = data; + } else { + src_buf = buf; + for (ptr = (uint8_t *)src_buf, i = 20; i > 0; + i -= data_size, ptr += data_size) + memcpy(ptr, data, min(i, data_size)); + } + } + bin_func(dst_reg->digest, src_buf, 20); + dst_reg->valid = true; + dst_modified = true; + break; + case HRE_LOADKEY: + if (hre_op_loadkey(src_reg, dst_reg, data, data_size)) + return NULL; + break; + default: + return NULL; + } + + if (dst_reg && dst_modified && IS_PCR_HREG(dst_spec)) { + hre_tpm_err = tpm_extend(HREG_IDX(dst_spec), dst_reg->digest, + dst_reg->digest); + if (hre_tpm_err) { + hre_err = HRE_E_TPM_FAILURE; + return NULL; + } + } +end: + *ip += 4; + *code_size -= 4; + if (opcode & 0x80) { + *ip += data_size; + *code_size -= data_size; + } + return *ip; +} + +/** + * @brief runs a program on the hash register engine. + * @param code pointer to the (HRE) code. + * @param code_size size of the code (in bytes). + * @return 0 on success, != 0 on failure. + */ +static int hre_run_program(const uint8_t *code, size_t code_size) +{ + size_t code_left; + const uint8_t *ip = code; + code_left = code_size; + hre_tpm_err = 0; + hre_err = HRE_E_OK; + while (code_left > 0) + if (!hre_execute_op(&ip, &code_left)) + return -1; + return hre_err; +} + +static int check_hmac(struct key_program *hmac, + const uint8_t *data, size_t data_size) +{ + uint8_t key[20], computed_hmac[20]; + uint32_t type; + + type = get_unaligned_be32(hmac->code); + if (type != 0) + return 1; + memset(key, 0, sizeof(key)); + compute_extend(key, pcr_hregs[1].digest, 20); + compute_extend(key, pcr_hregs[2].digest, 20); + compute_extend(key, pcr_hregs[3].digest, 20); + compute_extend(key, pcr_hregs[4].digest, 20); + + sha1_hmac(key, sizeof(key), data, data_size, computed_hmac); + + return memcmp(computed_hmac, hmac->code + 4, 20); +} + +static int verify_program(struct key_program *prg) +{ + uint32_t crc; + crc = crc32(0, prg->code, prg->code_size); + + if (crc != prg->code_crc) { + printf("HRC crc mismatch: %08x != %08x\n", + crc, prg->code_crc); + return 1; + } + return 0; +} + +#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE) +static struct key_program *load_sd_key_program(void) +{ + u32 code_len, code_offset; + struct mmc *mmc; + u8 buf[128]; + struct key_program *result = NULL, *hmac = NULL; + struct key_program header; + + mmc = find_mmc_device(0); + if (!mmc) + return NULL; + mmc_init(mmc); + + if (ccdm_mmc_read(mmc, 0, buf, sizeof(buf)) <= 0) + goto failure; + + code_offset = *(u32 *)(buf + ESDHC_BOOT_IMAGE_ADDR_OFS); + code_len = *(u32 *)(buf + ESDHC_BOOT_IMAGE_SIZE_OFS); + + code_offset += code_len; + /* TODO: the following needs to be the size of the 2nd stage env */ + code_offset += CONFIG_ENV_SIZE; + + if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0) + goto failure; + + header.magic = get_unaligned_be32(buf); + header.code_crc = get_unaligned_be32(buf + 4); + header.code_size = get_unaligned_be32(buf + 8); + + if (header.magic != MAGIC_KEY_PROGRAM) + goto failure; + + result = malloc(sizeof(struct key_program) + header.code_size); + if (!result) + goto failure; + *result = header; + + printf("load key program chunk from SD card (%u bytes) ", + header.code_size); + code_offset += 12; + if (ccdm_mmc_read(mmc, code_offset, result->code, header.code_size) + < 0) + goto failure; + code_offset += header.code_size; + puts("\n"); + + if (verify_program(result)) + goto failure; + + if (ccdm_mmc_read(mmc, code_offset, buf, 4*3) < 0) + goto failure; + + header.magic = get_unaligned_be32(buf); + header.code_crc = get_unaligned_be32(buf + 4); + header.code_size = get_unaligned_be32(buf + 8); + + if (header.magic == MAGIC_HMAC) { + puts("check integrity\n"); + hmac = malloc(sizeof(struct key_program) + header.code_size); + if (!hmac) + goto failure; + *hmac = header; + code_offset += 12; + if (ccdm_mmc_read(mmc, code_offset, hmac->code, + hmac->code_size) < 0) + goto failure; + if (verify_program(hmac)) + goto failure; + if (check_hmac(hmac, result->code, result->code_size)) { + puts("key program integrity could not be verified\n"); + goto failure; + } + puts("key program verified\n"); + } + + goto end; +failure: + if (result) + free(result); + result = NULL; +end: + if (hmac) + free(hmac); + return result; +} +#endif + +#ifdef CCDM_SECOND_STAGE +/** + * @brief load a key program from file system. + * @param ifname interface of the file system + * @param dev_part_str device part of the file system + * @param fs_type tyep of the file system + * @param path path of the file to load. + * @return the loaded structure or NULL on failure. + */ +static struct key_program *load_key_chunk(const char *ifname, + const char *dev_part_str, int fs_type, + const char *path) +{ + struct key_program *result = NULL; + struct key_program header; + uint32_t crc; + uint8_t buf[12]; + int i; + + if (fs_set_blk_dev(ifname, dev_part_str, fs_type)) + goto failure; + i = fs_read(path, (ulong)buf, 0, 12); + if (i < 12) + goto failure; + header.magic = get_unaligned_be32(buf); + header.code_crc = get_unaligned_be32(buf + 4); + header.code_size = get_unaligned_be32(buf + 8); + + if (header.magic != MAGIC_HMAC && header.magic != MAGIC_KEY_PROGRAM) + goto failure; + + result = malloc(sizeof(struct key_program) + header.code_size); + if (!result) + goto failure; + if (fs_set_blk_dev(ifname, dev_part_str, fs_type)) + goto failure; + i = fs_read(path, (ulong)result, 0, + sizeof(struct key_program) + header.code_size); + if (i <= 0) + goto failure; + *result = header; + + crc = crc32(0, result->code, result->code_size); + + if (crc != result->code_crc) { + printf("%s: HRC crc mismatch: %08x != %08x\n", + path, crc, result->code_crc); + goto failure; + } + goto end; +failure: + if (result) { + free(result); + result = NULL; + } +end: + return result; +} +#endif + +#if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE) +static int first_stage_actions(void) +{ + int result = 0; + struct key_program *sd_prg = NULL; + + puts("CCDM S1: start actions\n"); +#ifndef CCDM_SECOND_STAGE + if (tpm_continue_self_test()) + goto failure; +#else + tpm_continue_self_test(); +#endif + mdelay(37); + + if (hre_run_program(prg_stage1_prepare, sizeof(prg_stage1_prepare))) + goto failure; + + sd_prg = load_sd_key_program(); + if (sd_prg) { + if (hre_run_program(sd_prg->code, sd_prg->code_size)) + goto failure; + puts("SD code run successfully\n"); + } else { + puts("no key program found on SD\n"); + goto failure; + } + goto end; +failure: + result = 1; +end: + if (sd_prg) + free(sd_prg); + printf("CCDM S1: actions done (%d)\n", result); + return result; +} +#endif + +#ifdef CCDM_FIRST_STAGE +static int first_stage_init(void) +{ + int res = 0; + puts("CCDM S1\n"); + if (tpm_init() || tpm_startup(TPM_ST_CLEAR)) + return 1; + res = first_stage_actions(); +#ifndef CCDM_SECOND_STAGE + if (!res) { + if (bl2_entry) + (*bl2_entry)(); + res = 1; + } +#endif + return res; +} +#endif + +#ifdef CCDM_SECOND_STAGE +static int second_stage_init(void) +{ + static const char mac_suffix[] = ".mac"; + bool did_first_stage_run = true; + int result = 0; + char *cptr, *mmcdev = NULL; + struct key_program *hmac_blob = NULL; + const char *image_path = "/ccdm.itb"; + char *mac_path = NULL; + ulong image_addr; + size_t image_size; + uint32_t err; + + printf("CCDM S2\n"); + if (tpm_init()) + return 1; + err = tpm_startup(TPM_ST_CLEAR); + if (err != TPM_INVALID_POSTINIT) + did_first_stage_run = false; + +#ifdef CCDM_AUTO_FIRST_STAGE + if (!did_first_stage_run && first_stage_actions()) + goto failure; +#else + if (!did_first_stage_run) + goto failure; +#endif + + if (hre_run_program(prg_stage2_prepare, sizeof(prg_stage2_prepare))) + goto failure; + + /* run "prepboot" from env to get "mmcdev" set */ + cptr = getenv("prepboot"); + if (cptr && !run_command(cptr, 0)) + mmcdev = getenv("mmcdev"); + if (!mmcdev) + goto failure; + + cptr = getenv("ramdiskimage"); + if (cptr) + image_path = cptr; + + mac_path = malloc(strlen(image_path) + strlen(mac_suffix) + 1); + if (mac_path == NULL) + goto failure; + strcpy(mac_path, image_path); + strcat(mac_path, mac_suffix); + + /* read image from mmcdev (ccdm.itb) */ + image_addr = (ulong)get_image_location(); + if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT)) + goto failure; + image_size = fs_read(image_path, image_addr, 0, 0); + if (image_size <= 0) + goto failure; + printf("CCDM image found on %s, %d bytes\n", mmcdev, image_size); + + hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path); + if (!hmac_blob) { + puts("failed to load mac file\n"); + goto failure; + } + if (verify_program(hmac_blob)) { + puts("corrupted mac file\n"); + goto failure; + } + if (check_hmac(hmac_blob, (u8 *)image_addr, image_size)) { + puts("image integrity could not be verified\n"); + goto failure; + } + puts("CCDM image OK\n"); + + hre_run_program(prg_stage2_success, sizeof(prg_stage2_success)); + + goto end; +failure: + result = 1; + hre_run_program(prg_stage_fail, sizeof(prg_stage_fail)); +end: + if (hmac_blob) + free(hmac_blob); + if (mac_path) + free(mac_path); + return result; +} +#endif + +int show_self_hash(void) +{ + struct h_reg *hash_ptr; +#ifdef CCDM_SECOND_STAGE + struct h_reg hash; + hash_ptr = &hash; + if (compute_self_hash(hash_ptr)) + return 1; +#else + hash_ptr = &fix_hregs[FIX_HREG_SELF_HASH]; +#endif + puts("self hash: "); + if (hash_ptr && hash_ptr->valid) + print_buffer(0, hash_ptr->digest, 1, 20, 20); + else + puts("INVALID\n"); + return 0; +} + +/** + * @brief let the system hang. + * + * Called on error. + * Will stop the boot process; display a message and signal the error condition + * by blinking the "status" and the "finder" LED of the controller board. + * + * @note the develop version runs the blink cycle 2 times and then returns. + * The release version never returns. + */ +static void ccdm_hang(void) +{ + static const u64 f0 = 0x0ba3bb8ba2e880; /* blink code "finder" LED */ + static const u64 s0 = 0x00f0f0f0f0f0f0; /* blink code "status" LED */ + u64 f, s; + int i; +#ifdef CCDM_DEVELOP + int j; +#endif + I2C_SET_BUS(0); + pca9698_direction_output(0x22, 0, 0); /* Finder */ + pca9698_direction_output(0x22, 4, 0); /* Status */ + + puts("### ERROR ### Please RESET the board ###\n"); + bootstage_error(BOOTSTAGE_ID_NEED_RESET); +#ifdef CCDM_DEVELOP + puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n"); + puts("** but we continue since this is a DEVELOP version **\n"); + puts("*** ERROR ******** THIS WOULD HANG ******** ERROR ***\n"); + for (j = 2; j-- > 0;) { + putc('#'); +#else + for (;;) { +#endif + f = f0; + s = s0; + for (i = 54; i-- > 0;) { + pca9698_set_value(0x22, 0, !(f & 1)); + pca9698_set_value(0x22, 4, (s & 1)); + f >>= 1; + s >>= 1; + mdelay(120); + } + } + puts("\ncontinue...\n"); +} + +int startup_ccdm_id_module(void) +{ + int result = 0; + unsigned int orig_i2c_bus; + + orig_i2c_bus = I2C_GET_BUS(); + I2C_SET_BUS(1); + + /* goto end; */ + +#ifdef CCDM_DEVELOP + show_self_hash(); +#endif +#ifdef CCDM_FIRST_STAGE + result = first_stage_init(); + if (result) { + puts("1st stage init failed\n"); + goto failure; + } +#endif +#ifdef CCDM_SECOND_STAGE + result = second_stage_init(); + if (result) { + puts("2nd stage init failed\n"); + goto failure; + } +#endif + + goto end; +failure: + result = 1; +end: + I2C_SET_BUS(orig_i2c_bus); + if (result) + ccdm_hang(); + return result; +} diff --git a/board/gdsys/p1022/controlcenterd-id.h b/board/gdsys/p1022/controlcenterd-id.h new file mode 100644 index 0000000..de4770a --- /dev/null +++ b/board/gdsys/p1022/controlcenterd-id.h @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2013 + * Reinhard Pfau, Guntermann & Drunck GmbH, reinhard.pfau@gdsys.cc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __CONTROLCENTER_ID_H +#define __CONTROLCENTER_ID_H + +int ccdm_compute_self_hash(void); +int startup_ccdm_id_module(void); + +int show_self_hash(void); + +#endif /* __CONTROLCENTER_ID_H */ diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c new file mode 100644 index 0000000..be1f638 --- /dev/null +++ b/board/gdsys/p1022/controlcenterd.c @@ -0,0 +1,447 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/io.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <asm/fsl_law.h> +#include <netdev.h> +#include <i2c.h> +#include <pca9698.h> +#include <watchdog.h> +#include "../common/dp501.h" +#include "controlcenterd-id.h" + +DECLARE_GLOBAL_DATA_PTR; + +enum { + REG_REFLECTION_LOW = 0x0000, + REG_VERSIONS = 0x0004, + REG_FPGA_VERSION = 0x0008, + REG_FEATURES = 0x000C, + REG_TOP_INTERRUPT = 0x0010, + REG_TOP_INTERRUPT_SET = 0x0014, + REG_TOP_INTERRUPT_CLEAR = 0x0018, + REG_STATUS = 0x001C, + REG_CONTROL = 0x0020, + REG_TESTMEM1 = 0x100, + REG_DMA_WRITE_CONTROL = 0x0200, + REG_DMA_WRITE_BASE_ADDRESS_LOW = 0x0204, + REG_DMA_WRITE_BASE_ADDRESS_HIGH = 0x0208, + REG_DMA_WRITE_LENGTH = 0x020C, + REG_DMA_WRITE_HEAD = 0x0210, + REG_DMA_WRITE_TAIL = 0x0214, + REG_DMA_WRITE_MIN_INT_INTERVAL = 0x0218, + REG_DMA_WRITE_MAX_PACKETS_INT_INTERVAL = 0x021C, + REG_DMA_READ_CONTROL = 0x0300, + REG_DMA_READ_BASE_ADDRESS_LOW = 0x0304, + REG_DMA_READ_BASE_ADDRESS_HIGH = 0x0308, + REG_DMA_READ_LENGTH = 0x030C, + REG_DMA_READ_HEAD = 0x0310, + REG_DMA_READ_TAIL = 0x0314, + REG_DMA_READ_MIN_INT_INTERVAL = 0x0318, + REG_DMA_READ_MAX_PACKETS_INT_INTERVAL = 0x031C, +}; + +enum { + HWVER_100 = 0, + HWVER_110 = 1, + HWVER_120 = 2, +}; + +#ifndef CONFIG_TRAILBLAZER +static struct pci_device_id hydra_supported[] = { + { 0x6d5e, 0xcdc0 }, + {} +}; + +static void hydra_initialize(void); +#endif + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + /* Reset eLBC_DIU and SPI_eLBC in case we are booting from SD */ + clrsetbits_be32(&gur->pmuxcr, 0x00600000, 0x80000000); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, 0x00001000); + + /* Set pmuxcr to enable GPIO 3_11-3_13 */ + setbits_be32(&gur->pmuxcr, 0x00000010); + + /* Set pmuxcr to enable GPIO 2_31,3_9+10 */ + setbits_be32(&gur->pmuxcr, 0x00000020); + + /* Set pmuxcr to enable GPIO 2_28-2_30 */ + setbits_be32(&gur->pmuxcr, 0x000000c0); + + /* Set pmuxcr to enable GPIO 3_20-3_22 */ + setbits_be32(&gur->pmuxcr2, 0x03000000); + + /* Set pmuxcr to enable IRQ0-2 */ + clrbits_be32(&gur->pmuxcr, 0x00000300); + + /* Set pmuxcr to disable IRQ3-11 */ + setbits_be32(&gur->pmuxcr, 0x000000F0); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + + /* Set the pin muxing to enable ETSEC2. */ + clrbits_be32(&gur->pmuxcr2, 0x001F8000); + +#ifdef CONFIG_TRAILBLAZER + /* + * GPIO3_10 SPERRTRIGGER + */ + setbits_be32(&pgpio->gpdir, 0x00200000); + clrbits_be32(&pgpio->gpdat, 0x00200000); + udelay(100); + setbits_be32(&pgpio->gpdat, 0x00200000); + udelay(100); + clrbits_be32(&pgpio->gpdat, 0x00200000); +#endif + + /* + * GPIO3_11 CPU-TO-FPGA-RESET# + */ + setbits_be32(&pgpio->gpdir, 0x00100000); + clrbits_be32(&pgpio->gpdat, 0x00100000); + + /* + * GPIO3_21 CPU-STATUS-WATCHDOG-TRIGGER# + */ + setbits_be32(&pgpio->gpdir, 0x00000400); + + return 0; +} + +int checkboard(void) +{ + printf("Board: ControlCenter DIGITAL\n"); + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +/* + * A list of PCI and SATA slots + */ +enum slot_id { + SLOT_PCIE1 = 1, + SLOT_PCIE2, + SLOT_PCIE3, + SLOT_PCIE4, + SLOT_PCIE5, + SLOT_SATA1, + SLOT_SATA2 +}; + +/* + * This array maps the slot identifiers to their names on the P1022DS board. + */ +static const char * const slot_names[] = { + [SLOT_PCIE1] = "Slot 1", + [SLOT_PCIE2] = "Slot 2", + [SLOT_PCIE3] = "Slot 3", + [SLOT_PCIE4] = "Slot 4", + [SLOT_PCIE5] = "Mini-PCIe", + [SLOT_SATA1] = "SATA 1", + [SLOT_SATA2] = "SATA 2", +}; + +/* + * This array maps a given SERDES configuration and SERDES device to the PCI or + * SATA slot that it connects to. This mapping is hard-coded in the FPGA. + */ +static u8 serdes_dev_slot[][SATA2 + 1] = { + [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 }, + [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4, + [PCIE2] = SLOT_PCIE5 }, + [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3 }, + [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1c] = { [PCIE1] = SLOT_PCIE1, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 }, + [0x1f] = { [PCIE1] = SLOT_PCIE1 }, +}; + + +/* + * Returns the name of the slot to which the PCIe or SATA controller is + * connected + */ +const char *board_serdes_name(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + enum slot_id slot = serdes_dev_slot[srds_cfg][device]; + const char *name = slot_names[slot]; + + if (name) + return name; + else + return "Nothing"; +} + +void hw_watchdog_reset(void) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + clrbits_be32(&pgpio->gpdat, 0x00000400); + setbits_be32(&pgpio->gpdat, 0x00000400); +} + +#ifdef CONFIG_TRAILBLAZER +int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rcode = 0; + + if (run_command(getenv("bootcmd"), flag) < 0) + rcode = 1; + return rcode; +} + +int board_early_init_r(void) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + /* + * GPIO3_12 PPC_SYSTEMREADY# + */ + setbits_be32(&pgpio->gpdir, 0x00080000); + setbits_be32(&pgpio->gpodr, 0x00080000); + clrbits_be32(&pgpio->gpdat, 0x00080000); + + return ccdm_compute_self_hash(); +} + +int last_stage_init(void) +{ + startup_ccdm_id_module(); + return 0; +} + +#else +void pci_init_board(void) +{ + fsl_pcie_init_board(0); + + hydra_initialize(); +} + +int board_early_init_r(void) +{ + unsigned int k = 0; + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO3_ADDR); + + /* wait for FPGA configuration to finish */ + while (!pca9698_get_value(0x22, 11) && (k++ < 30)) + udelay(100000); + + if (k > 30) { + puts("FPGA configuration timed out.\n"); + } else { + /* clear FPGA reset */ + udelay(1000); + setbits_be32(&pgpio->gpdat, 0x00100000); + } + + /* give time for PCIe link training */ + udelay(100000); + + /* + * GPIO3_12 PPC_SYSTEMREADY# + */ + setbits_be32(&pgpio->gpdir, 0x00080000); + setbits_be32(&pgpio->gpodr, 0x00080000); + clrbits_be32(&pgpio->gpdat, 0x00080000); + + return 0; +} + +int last_stage_init(void) +{ + /* Turn on Parade DP501 */ + pca9698_direction_output(0x22, 7, 1); + udelay(500000); + + dp501_powerup(0x08); + + startup_ccdm_id_module(); + + return 0; +} + +/* + * Initialize on-board and/or PCI Ethernet devices + * + * Returns: + * <0, error + * 0, no ethernet devices found + * >0, number of ethernet devices initialized + */ +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[2]; + unsigned int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + + return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); +} + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_HAS_FSL_DR_USB + fdt_fixup_dr_usb(blob, bd); +#endif + + FT_FSL_PCI_SETUP; +} +#endif + +static void hydra_initialize(void) +{ + unsigned int i; + pci_dev_t devno; + + /* Find and probe all the matching PCI devices */ + for (i = 0; (devno = pci_find_devices(hydra_supported, i)) >= 0; i++) { + u32 val; + uint8_t *hw_addr; + u32 versions; + u32 fpga_version; + u32 fpga_features; + + unsigned hardware_version; + unsigned feature_uart_channels; + unsigned feature_sb_channels; + + /* Try to enable I/O accesses and bus-mastering */ + val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_dword(devno, PCI_COMMAND, val); + + /* Make sure it worked */ + pci_read_config_dword(devno, PCI_COMMAND, &val); + if (!(val & PCI_COMMAND_MEMORY)) { + puts("Can't enable I/O memory\n"); + continue; + } + if (!(val & PCI_COMMAND_MASTER)) { + puts("Can't enable bus-mastering\n"); + continue; + } + + /* read FPGA details */ + hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0, + PCI_REGION_MEM); + + versions = readl(hw_addr + REG_VERSIONS); + fpga_version = readl(hw_addr + REG_FPGA_VERSION); + fpga_features = readl(hw_addr + REG_FEATURES); + + hardware_version = versions & 0xf; + feature_uart_channels = (fpga_features >> 6) & 0x1f; + feature_sb_channels = fpga_features & 0x1f; + + printf("FPGA%d: ", i); + + switch (hardware_version) { + case HWVER_100: + printf("HW-Ver 1.00\n"); + break; + + case HWVER_110: + printf("HW-Ver 1.10\n"); + break; + + case HWVER_120: + printf("HW-Ver 1.20\n"); + break; + + default: + printf("HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d uart channel(s)", feature_uart_channels); + printf(" %d sideband channel(s)\n", feature_sb_channels); + } +} +#endif diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c new file mode 100644 index 0000000..4a652de --- /dev/null +++ b/board/gdsys/p1022/ddr.c @@ -0,0 +1,71 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan srikanth.srinivasan@freescale.com + * Timur Tabi timur@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + unsigned int i; + + if (ctrl_num) { + printf("Wrong parameter for controller number %d", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* set odt_rd_cfg and odt_wr_cfg. */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } + + popts->clk_adjust = 5; + popts->cpo_override = 0x1f; + popts->write_data_delay = 2; + popts->half_strength_driver_enable = 1; + + /* Per AN4039, enable ZQ calibration. */ + popts->zq_en = 1; +} + +#ifdef CONFIG_SPD_EEPROM +/* + * we only have a "fake" SPD-EEPROM here, which has 16 bit addresses + */ +void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) +{ + int ret = i2c_read(i2c_address, 0, 2, (uchar *)spd, + sizeof(generic_spd_eeprom_t)); + + if (ret) { + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } + memset(spd, 0, sizeof(generic_spd_eeprom_t)); + } +} +#endif diff --git a/board/gdsys/p1022/diu.c b/board/gdsys/p1022/diu.c new file mode 100644 index 0000000..52ac1e6 --- /dev/null +++ b/board/gdsys/p1022/diu.c @@ -0,0 +1,87 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Authors: Timur Tabi timur@freescale.com + * + * FSL DIU Framebuffer driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <command.h> +#include <linux/ctype.h> +#include <asm/io.h> +#include <stdio_dev.h> +#include <video_fb.h> +#include <fsl_diu_fb.h> + +#define PMUXCR_ELBCDIU_MASK 0xc0000000 +#define PMUXCR_ELBCDIU_NOR16 0x80000000 +#define PMUXCR_ELBCDIU_DIU 0x40000000 + +/* + * DIU Area Descriptor + * + * Note that we need to byte-swap the value before it's written to the AD + * register. So even though the registers don't look like they're in the same + * bit positions as they are on the MPC8610, the same value is written to the + * AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_SHIFT 19 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_SHIFT 0 + +/* + * Variables used by the DIU/LBC switching code. It's safe to makes these + * global, because the DIU requires DDR, so we'll only run this code after + * relocation. + */ +static u32 pmuxcr; + +void diu_set_pixel_clock(unsigned int pixclock) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + unsigned long speed_ccb, temp; + u32 pixval; + + speed_ccb = get_bus_freq(0); + temp = 1000000000 / pixclock; + temp *= 1000; + pixval = speed_ccb / temp; + debug("DIU pixval = %u\n", pixval); + + /* Modify PXCLK in GUTS CLKDVDR */ + temp = in_be32(&gur->clkdvdr) & 0x2000FFFF; + out_be32(&gur->clkdvdr, temp); /* turn off clock */ + out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16)); +} + +int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pixel_format; + + pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | + (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | + (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | + (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | + (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); + + printf("DIU: Switching to %ux%u\n", xres, yres); + + /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */ + clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); + pmuxcr = in_be32(&gur->pmuxcr); + + return fsl_diu_init(xres, yres, pixel_format, 0); +} diff --git a/board/gdsys/p1022/law.c b/board/gdsys/p1022/law.c new file mode 100644 index 0000000..96f38f7 --- /dev/null +++ b/board/gdsys/p1022/law.c @@ -0,0 +1,20 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan srikanth.srinivasan@freescale.com + * Timur Tabi timur@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_ELBC_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/gdsys/p1022/sdhc_boot.c b/board/gdsys/p1022/sdhc_boot.c new file mode 100644 index 0000000..e432318 --- /dev/null +++ b/board/gdsys/p1022/sdhc_boot.c @@ -0,0 +1,63 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mmc.h> +#include <malloc.h> + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 + +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + u8 *tmp_buf; + u32 blklen, code_offset, code_len, n; + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) + return 1; + + /* read out the first block, get the config data information */ + n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf); + if (!n) { + free(tmp_buf); + return 1; + } + + /* Get the Source Address, from offset 0x50 */ + code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR); + + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); + + *env_addr = code_offset + code_len; + + free(tmp_buf); + + return 0; +} diff --git a/board/gdsys/p1022/tlb.c b/board/gdsys/p1022/tlb.c new file mode 100644 index 0000000..9cad692 --- /dev/null +++ b/board/gdsys/p1022/tlb.c @@ -0,0 +1,77 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan srikanth.srinivasan@freescale.com + * Timur Tabi timur@freescale.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* *I*G* - eLBC */ + SET_TLB_ENTRY(1, CONFIG_SYS_ELBC_BASE, CONFIG_SYS_ELBC_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_1M, 1), + +#if defined(CONFIG_TRAILBLAZER) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), +#else + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256K, 1), + +#ifdef CONFIG_SYS_RAMBOOT + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_1G, 1), +#endif +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/boards.cfg b/boards.cfg index 31483d6..e74f9d9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -888,6 +888,13 @@ BSC9132QDS_SDCARD_DDRCLK100 powerpc mpc85xx bsc9132qds freesca BSC9132QDS_SDCARD_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133 BSC9132QDS_SPIFLASH_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100 BSC9132QDS_SPIFLASH_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133 +controlcenterd_36BIT_SDCARD powerpc mpc85xx p1022 gdsys - controlcenterd:36BIT,SDCARD +controlcenterd_36BIT_SDCARD_DEVELOP powerpc mpc85xx p1022 gdsys - controlcenterd:36BIT,SDCARD,DEVELOP +controlcenterd_36BIT_SPIFLASH powerpc mpc85xx p1022 gdsys - controlcenterd:36BIT,SPIFLASH +controlcenterd_SDCARD powerpc mpc85xx p1022 gdsys - controlcenterd:SDCARD +controlcenterd_SPIFLASH powerpc mpc85xx p1022 gdsys - controlcenterd:SPIFLASH +controlcenterd_TRAILBLAZER powerpc mpc85xx p1022 gdsys - controlcenterd:TRAILBLAZER,SPIFLASH +controlcenterd_TRAILBLAZER_DEVELOP powerpc mpc85xx p1022 gdsys - controlcenterd:TRAILBLAZER,SPIFLASH,DEVELOP stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h new file mode 100644 index 0000000..ca98edf --- /dev/null +++ b/include/configs/controlcenterd.h @@ -0,0 +1,525 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * based on P1022DS.h + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_36BIT +#define CONFIG_PHYS_64BIT +#endif + +#ifdef CONFIG_SDCARD +#define CONFIG_RAMBOOT_SDCARD +#endif + +#ifdef CONFIG_SPIFLASH +#define CONFIG_RAMBOOT_SPIFLASH +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ +#define CONFIG_P1022 +#define CONFIG_CONTROLCENTERD +#define CONFIG_MP /* support multiple processors */ +#ifdef CONFIG_TRAILBLAZER +#define CONFIG_RELEASE_CORE0_ONLY +#endif + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENABLE_36BIT_PHYS +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#ifdef CONFIG_TRAILBLAZER +#define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01" +#else +#define CONFIG_IDENT_STRING " controlcenterd 0.01" +#endif + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ +#endif + +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_SYS_CLK_FREQ 66666600 +#define CONFIG_DDR_CLK_FREQ 66666600 + +#define CONFIG_SYS_RAMBOOT + +#ifdef CONFIG_TRAILBLAZER + +#define CONFIG_SYS_TEXT_BASE 0xf8fc0000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) + +/* + * Config the L2 Cache + */ +#define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull +#else +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#endif +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) + +#else /* CONFIG_TRAILBLAZER */ + +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#endif /* CONFIG_TRAILBLAZER */ + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + + +/* + * Memory map + * + * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable + * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable + * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable + * + * Localbus non-cacheable + * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable + * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#ifdef CONFIG_TRAILBLAZER +/* leave CCSRBAR at default, because u-boot expects it to be exactly there */ +#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT +#else +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#endif +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) + +/* + * DDR Setup + */ + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 1024 +#define CONFIG_VERY_BIG_RAM + +#define CONFIG_FSL_DDR3 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x3fffffff + +#ifdef CONFIG_TRAILBLAZER +#define CONFIG_SPD_EEPROM +#define SPD_EEPROM_ADDRESS 0x52 +/*#define CONFIG_FSL_DDR_INTERACTIVE*/ +#endif + +/* + * Local Bus Definitions + */ +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ + +#define CONFIG_SYS_ELBC_BASE 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE +#endif + +#define CONFIG_UART_BR_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) +#define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) + +#define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ +#define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ + +#define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM +#define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* + * I2C + */ +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_CMD_I2C + +#define CONFIG_FSL_I2C +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES { {0} } + +#define CONFIG_PCA9698 /* NXP PCA9698 */ + +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +#ifndef CONFIG_TRAILBLAZER +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 +#endif + +/* + * TPM + */ +#define CONFIG_ATMEL_TWI_TPM +#define CONFIG_TPM +#define CONFIG_TPM_AUTH_SESSIONS +#define CONFIG_SHA1 +#define CONFIG_CMD_TPM + +/* + * MMC + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_MMC + +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR + + +#ifndef CONFIG_TRAILBLAZER + +/* + * Video + */ +#define CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CMD_BMP + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_CMD_PCI + +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ + +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA + +#define CONFIG_FSL_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +/* + * Ethernet + */ +#define CONFIG_TSEC_ENET + +#define CONFIG_TSECV2 + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +/* + * USB + */ +#define CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE + +#define CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#endif /* CONFIG_TRAILBLAZER */ + +/* + * Environment + */ +#if defined(CONFIG_TRAILBLAZER) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#undef CONFIG_CMD_SAVEENV +#elif defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_RAMBOOT_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#define CONFIG_SYS_EXTRA_ENV_RELOC + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* + * Command line configuration. + */ +#ifndef CONFIG_TRAILBLAZER +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#endif /* CONFIG_TRAILBLAZER */ + +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#include <config_cmd_default.h> + +#ifndef CONFIG_TRAILBLAZER + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * Board initialisation callbacks + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R +#define CONFIG_LAST_STAGE_INIT + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +#else /* CONFIG_TRAILBLAZER */ + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_LAST_STAGE_INIT +#undef CONFIG_CMD_BOOTM + +#endif /* CONFIG_TRAILBLAZER */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_HW_WATCHDOG +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE +#define CONFIG_DOS_PARTITION + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ + +#ifdef CONFIG_TRAILBLAZER + +#define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#else + +#define CONFIG_HOSTNAME controlcenterd +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ + +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS1\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=controlcenterd.dtb\0" \ + "bdev=sda3\0" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* CONFIG_TRAILBLAZER */ + +#endif
participants (4)
-
Dirk Eibach -
Jim Chargin -
Scott Wood -
Wolfgang Denk