[U-Boot] [PATCH] Fix: brocken boot message at serial line on AT91SAM9263-EK board
Signed-off-by: Jens Scharsig (BuS Elektronik) esw@bus-elektronik.de --- board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 41ec752..60ff1c0 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -254,6 +254,7 @@ int board_early_init_f(void) (1 << ATMEL_ID_PIOCDE), &pmc->pcer);
+ at91_seriald_hw_init(); return 0; }
@@ -267,7 +268,6 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9263ek_nand_hw_init(); #endif
Dear Jens Scharsig,
On 19.03.2012 15:25, Jens Scharsig (BuS Elektronik) wrote:
Signed-off-by: Jens Scharsig (BuS Elektronik) esw@bus-elektronik.de
board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 41ec752..60ff1c0 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -254,6 +254,7 @@ int board_early_init_f(void) (1 << ATMEL_ID_PIOCDE), &pmc->pcer);
- at91_seriald_hw_init(); return 0;
}
@@ -267,7 +268,6 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND at91sam9263ek_nand_hw_init(); #endif
applied to u-boot-atmel/master, thanks!
Best regards
Andreas Bießmann
participants (2)
-
Andreas Bießmann -
Jens Scharsig (BuS Elektronik)