Hi all,

Heiko Schocher added support for the low level configuration of the DA850 SoCs and I would like to use this code on my board. At the same time I would like to add support for this low level configuration for the da850evm board. This makes it possible to test/use the lowlevel functions also for developers who don't have access neither to Heiko's board nor to mine.

The patchset aims at implementing SPL support for the da850evm configuration to allow booting this board from SPI flash without using the UBL (see doc/README.davinci).

Major changes for v2: - Added header files that contain the definition of the pinmux structs. - Added code that actually loads u-boot from SPI flash and starts it.

This patchset is work in progress - I did for example not include a feature requested by Heiko in [1]. Instead I just what to show you the current state of my work and would like to ask you for comments.

The first patches move the pinmux functions from the board tree to the arch tree and also use the in the lowlevel configuration in arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c.

Patches #6 and #7 fix two problems I had during development.

The other patches add the SPL and fix mkimage for the building of AIS images.

The patches apply on top of mainline u-boot and Heiko's patch

arm, arm926ejs: always do cpu critical inits http://patchwork.ozlabs.org/patch/124787/

To build run

make da850evm_config make u-boot.ais

Then program u-boot.ais to SPI flash on the da850evm.

Regards, Christian

[1] http://lists.denx.de/pipermail/u-boot/2011-November/109997.html

Cc: Heiko Schocher hs@denx.de Cc: Wolfgang Denk wd@denx.de Cc: Sandeep Paulraj s-paulraj@ti.com Cc: Stefano Babic sbabic@denx.de Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Sudhakar Rajashekhara sudhakar.raj@ti.com Cc: Syed Mohammed Khasim sm.khasim@gmail.com Cc: Sughosh Ganu urwithsughosh@gmail.com Cc: Nick Thompson nick.thompson@gefanuc.com Cc: Tom Rini tom.rini@gmail.com

Christian Riesch (12): arm, davinci: Move pinmux functions from board to arch tree arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins arm, da850: Move the definitions of pinmux configurations to the arch tree arm, da830: Move the definitions of pinmux configurations to the arch tree arm, davinci: Remove duplication of pinmux configuration code arm, davinci: Fix clear bss loop for zero length bss arm: printf() is not available in some SPL configurations sf: Add spi_boot() to allow booting from SPI flash in an SPL arm, davinci: Add SPL support for DA850 SoCs arm, da850evm: Add an SPL for SPI boot mkimage: Fix variable length header support arm, davinci: Add support for generating AIS images to the Makefile

.gitignore | 1 + Makefile | 10 ++ arch/arm/cpu/arm926ejs/davinci/Makefile | 5 +- arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 36 +---- .../arm/cpu/arm926ejs/davinci/pinmux.c | 0 arch/arm/cpu/arm926ejs/davinci/spl.c | 34 +++++- arch/arm/cpu/arm926ejs/start.S | 8 +- arch/arm/include/asm/arch-davinci/da830_pinmux.h | 131 +++++++++++++++++ arch/arm/include/asm/arch-davinci/da850_pinmux.h | 152 ++++++++++++++++++++ arch/arm/include/asm/arch-davinci/hardware.h | 2 + arch/arm/lib/eabi_compat.c | 3 + board/davinci/common/Makefile | 2 +- board/davinci/da8xxevm/config.mk | 5 + board/davinci/da8xxevm/da830evm.c | 116 +-------------- board/davinci/da8xxevm/da850evm.c | 141 ++---------------- board/davinci/da8xxevm/hawkboard_nand_spl.c | 51 +------- board/davinci/da8xxevm/u-boot-spl.lds | 73 ++++++++++ board/davinci/ea20/ea20.c | 2 - doc/README.SPL | 1 + drivers/mtd/spi/Makefile | 6 + drivers/mtd/spi/spi_spl_load.c | 60 ++++++++ include/configs/da850evm.h | 53 +++++++- include/spi_flash.h | 2 + lib/Makefile | 2 + nand_spl/board/davinci/da8xxevm/Makefile | 6 +- tools/mkimage.c | 97 +++++++------ 26 files changed, 622 insertions(+), 377 deletions(-) rename board/davinci/common/davinci_pinmux.c => arch/arm/cpu/arm926ejs/davinci/pinmux.c (100%) create mode 100644 arch/arm/include/asm/arch-davinci/da830_pinmux.h create mode 100644 arch/arm/include/asm/arch-davinci/da850_pinmux.h create mode 100644 board/davinci/da8xxevm/config.mk create mode 100644 board/davinci/da8xxevm/u-boot-spl.lds create mode 100644 drivers/mtd/spi/spi_spl_load.c

On Monday, November 21, 2011, Christian Riesch christian.riesch@omicron.at wrote:

*** BLURB HERE ***

Christian Riesch (12): arm, davinci: Move pinmux functions from board to arch tree arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins arm, da850: Move the definitions of pinmux configurations to the arch tree arm, da830: Move the definitions of pinmux configurations to the arch tree arm, davinci: Remove duplication of pinmux configuration code arm, davinci: Fix clear bss loop for zero length bss arm: printf() is not available in some SPL configurations sf: Add spi_boot() to allow booting from SPI flash in an SPL arm, davinci: Add SPL support for DA850 SoCs arm, da850evm: Add an SPL for SPI boot mkimage: Fix variable length header support arm, davinci: Add support for generating AIS images to the Makefile

.gitignore | 1 + Makefile | 10 ++ arch/arm/cpu/arm926ejs/davinci/Makefile | 5 +- arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 36 +---- .../arm/cpu/arm926ejs/davinci/pinmux.c | 0 arch/arm/cpu/arm926ejs/davinci/spl.c | 34 +++++- arch/arm/cpu/arm926ejs/start.S | 8 +- arch/arm/include/asm/arch-davinci/da830_pinmux.h | 131

+++++++++++++++++

arch/arm/include/asm/arch-davinci/da850_pinmux.h | 152

++++++++++++++++++++

arch/arm/include/asm/arch-davinci/hardware.h | 2 + arch/arm/lib/eabi_compat.c | 3 + board/davinci/common/Makefile | 2 +- board/davinci/da8xxevm/config.mk | 5 + board/davinci/da8xxevm/da830evm.c | 116 +-------------- board/davinci/da8xxevm/da850evm.c | 141

++----------------

board/davinci/da8xxevm/hawkboard_nand_spl.c | 51 +------- board/davinci/da8xxevm/u-boot-spl.lds | 73 ++++++++++ board/davinci/ea20/ea20.c | 2 - doc/README.SPL | 1 + drivers/mtd/spi/Makefile | 6 + drivers/mtd/spi/spi_spl_load.c | 60 ++++++++ include/configs/da850evm.h | 53 +++++++- include/spi_flash.h | 2 + lib/Makefile | 2 + nand_spl/board/davinci/da8xxevm/Makefile | 6 +- tools/mkimage.c | 97 +++++++------ 26 files changed, 622 insertions(+), 377 deletions(-) rename board/davinci/common/davinci_pinmux.c =>

arch/arm/cpu/arm926ejs/davinci/pinmux.c (100%)

create mode 100644 arch/arm/include/asm/arch-davinci/da830_pinmux.h create mode 100644 arch/arm/include/asm/arch-davinci/da850_pinmux.h create mode 100644 board/davinci/da8xxevm/config.mk create mode 100644 board/davinci/da8xxevm/u-boot-spl.lds create mode 100644 drivers/mtd/spi/spi_spl_load.c

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot