Hi

No , my reference board is made by a local company, i forget the name

the board has SDRAM and Flash and one ethernet...just basic items...

-----Original Message----- From: Nghiem, Tien [mailto:TNghiem@oerlikon.ca] Sent: Thursday, October 14, 2004 11:45 PM To: ??? Subject: RE: [U-Boot-Users] help> on 8260 board, linux hangs

Hi,

What is your reference board? is it a MPC8260ADS?

-----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of hkkim@sanesys.com Sent: Monday, October 11, 2004 6:58 AM To: u-boot-users@lists.sourceforge.net Subject: [U-Boot-Users] help> on 8260 board, linux hangs

i ported uboot-1.0.0 with success on my board , it works fine ( i think )

i can download kernel image and no problem with mtest

but when i enter "bootm"

"Uncompressing kernel...OK" and no more message

but i tested it with a reference board , uboot-1.0.0 and kernel 2.4.4 from (www.denx.de)

on reference board it wokrs find ( i searched mailing-list and found "Uncompress...." problem because of HZ issue or bd_t type error

i think that is not my case )

i have no reference board circuit but i tried to designe my board with same momery ( type and size) , just they differs in CPU version ( reference is A.1 1K22A-XC , my board is C.2 6K23A could it cause a problem ? )

i use the same uboot in both boards

i have no idea what is wrong ? SW or HW ?

give me some ideas or hints

thanks in advance

NHY��X����u�L???�L?���vR?�v�)?��z?Y???���������?�g�N�g�h??q ��)rK~)?����?v??+jvz��?W���׮��jP�K?�X�X?��z��˲�q�zض ��X�˺�~�zw?�ϊ˝�����