Hi Wolfgang,

Of course, you are right. But I have to admit that I'm a little bit overburdened in that. I found a how-to for customizing u-boot for my own board. I followed the Steps and "only" the configuration file is missing. If its don't working, I can at least exclude that point. Is there maybe a patch or something else to get the necessary files?

Thanks for advance

Best regards, Frank

-----Ursprüngliche Nachricht----- Von: wd@denx.de [mailto:wd@denx.de] Gesendet: Dienstag, 6. März 2007 11:14 An: Frank Prepelica Cc: u-boot-users@lists.sourceforge.net Betreff: Re: [U-Boot-Users] U-Boot Configuration file for mpc8343m board

In message 29DC34A6B43468409F5A371CFE34E8490B657F@ex01.ads.ubidyne.de you wrote:

Could anybody send me a working <board.h> configuration file for our MPC8343m board. I tried to modify some similar configs in the U-Boot 1.2.0 package but no one works. I spent meanwhile 2 days to get this working.

Porting U-Boot to new hardware requires more (much more!) than just copying a board config file.

Best regards,

Wolfgang Denk