[U-Boot] [PATCH] Set console speed to 115200 on mx6cuboxi.
By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well.
Signed-off-by: Vagrant Cascadian vagrant@debian.org ---
include/configs/mx6cuboxi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 2782911da3..84fdf656cd 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -84,7 +84,7 @@ "initrd_high=0xffffffff\0" \ "fdt_high=0xffffffff\0" \ "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV "\0" \ + "console=" CONSOLE_DEV ",115200\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "update_sd_firmware=" \
On Fri, Mar 31, 2017 at 5:48 PM, Vagrant Cascadian vagrant@debian.org wrote:
By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well.
Signed-off-by: Vagrant Cascadian vagrant@debian.org
Reviewed-by: Fabio Estevam fabio.estevam@nxp.com
On 31/03/2017 22:48, Vagrant Cascadian wrote:
By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well.
Signed-off-by: Vagrant Cascadian vagrant@debian.org
include/configs/mx6cuboxi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 2782911da3..84fdf656cd 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -84,7 +84,7 @@ "initrd_high=0xffffffff\0" \ "fdt_high=0xffffffff\0" \ "ip_dyn=yes\0" \
- "console=" CONSOLE_DEV "\0" \
- "console=" CONSOLE_DEV ",115200\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "update_sd_firmware=" \
Applied to u-boot-imx, thanks!
Best regards, Stefano Babic
participants (3)
-
Fabio Estevam -
Stefano Babic -
Vagrant Cascadian