Read-to-read/Write-to-write turnaround for same chip select of DDR3 memory, BL/2+2 cycles is enough for them at BC4 and OTF case, BL/2 cycles is enough for fixed BL8. Cutting down the turnaround from BL/2+4 to BL/2+2 or BL/2 will improve the memory performance.

Signed-off-by: Dave Liu daveliu@freescale.com --- cpu/mpc8xxx/ddr/ctrl_regs.c | 17 ++++++++++++----- 1 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c index 73f349f..aeb54c3 100644 --- a/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -939,7 +939,8 @@ static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr) }

/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */ -static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr) +static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts) { unsigned int rwt = 0; /* Read-to-write turnaround for same CS */ unsigned int wrt = 0; /* Write-to-read turnaround for same CS */ @@ -948,9 +949,15 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr) unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */

#if defined(CONFIG_FSL_DDR3) - /* We need set BL/2 + 4 for BC4 or OTF */ - rrt = 4; /* BL/2 + 4 clocks */ - wwt = 4; /* BL/2 + 4 clocks */ + if (popts->burst_length == DDR_BL8) { + /* We set BL/2 for fixed BL8 */ + rrt = 0; /* BL/2 clocks */ + wwt = 0; /* BL/2 clocks */ + } else { + /* We need to set BL/2 + 2 to BC4 and OTF */ + rrt = 2; /* BL/2 + 2 clocks */ + wwt = 2; /* BL/2 + 2 clocks */ + } dll_lock = 1; /* tDLLK = 512 clocks from spec */ #endif ddr->timing_cfg_4 = (0 @@ -1348,7 +1355,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_clk_cntl(ddr, popts); set_ddr_init_addr(ddr); set_ddr_init_ext_addr(ddr); - set_timing_cfg_4(ddr); + set_timing_cfg_4(ddr, popts); set_timing_cfg_5(ddr);

set_ddr_zq_cntl(ddr, zq_en);