In case of xSPI bootmode OSPI flash is in DDR mode and needs to be accessed in multiple of 16bit accesses Hence we cannot parse sysfw.itb FIT image directly on OSPI flash via MMIO window. So, copy the image to internal on-chip RAM before parsing the image.

Moreover, board cfg data maybe modified by ROM/TIFS in case of HS platform and thus cannot reside in OSPI/xSPI and needs to be copied over to internal OCRAM.

This unblocks OSPI/xSPI boot on HS platforms

Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Reviewed-by: Dave Gerlach d-gerlach@ti.com Tested-by: Keerthy j-keerthy@ti.com --- arch/arm/mach-k3/sysfw-loader.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c index 9ce576186c..5e48c36ccd 100644 --- a/arch/arm/mach-k3/sysfw-loader.c +++ b/arch/arm/mach-k3/sysfw-loader.c @@ -22,6 +22,7 @@ #include <dm/uclass-internal.h> #include <spi_flash.h>

+#include <asm/io.h> #include <asm/arch/sys_proto.h> #include "common.h"

@@ -335,6 +336,14 @@ static void *k3_sysfw_get_spi_addr(void)

return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS); } + +static void k3_sysfw_spi_copy(u32 *dst, u32 *src, size_t len) +{ + size_t i; + + for (i = 0; i < len / sizeof(*dst); i++) + *dst++ = *src++; +} #endif

void k3_sysfw_loader(bool rom_loaded_sysfw, @@ -344,6 +353,9 @@ void k3_sysfw_loader(bool rom_loaded_sysfw, struct spl_image_info spl_image = { 0 }; struct spl_boot_device bootdev = { 0 }; struct ti_sci_handle *ti_sci; +#if CONFIG_IS_ENABLED(SPI_LOAD) + void *sysfw_spi_base; +#endif int ret = 0;

if (rom_loaded_sysfw) { @@ -394,9 +406,11 @@ void k3_sysfw_loader(bool rom_loaded_sysfw, #endif #if CONFIG_IS_ENABLED(SPI_LOAD) case BOOT_DEVICE_SPI: - sysfw_load_address = k3_sysfw_get_spi_addr(); - if (!sysfw_load_address) + sysfw_spi_base = k3_sysfw_get_spi_addr(); + if (!sysfw_spi_base) ret = -ENODEV; + k3_sysfw_spi_copy(sysfw_load_address, sysfw_spi_base, + CONFIG_K3_SYSFW_IMAGE_SIZE_MAX); break; #endif #if CONFIG_IS_ENABLED(YMODEM_SUPPORT)