[U-Boot] How to debug u-boot on arm board if nothing printed via uart?
Hello all, As the topic, im a newbie for the u-boot debugging. Now, it can't booting on my TI boards, there were nothing printed via uart. I want to know, for this condition, how to debug it? Thanks.
Hi,
Hello all, As the topic, im a newbie for the u-boot debugging. Now, it can't booting on my TI boards, there were nothing printed via uart.
Were your boards working previously?
What has happen that they aren't printing anything anymore?
I want to know, for this condition, how to debug it?
The most popular approach is to use a JTAG dongle.
Do you have JTAG pins on your board? You may want to look at OpenOCD.
Thanks. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
participants (2)
-
kipade -
Lukasz Majewski