...

make mx28evk_config? board/freescale/mx28evk

Are you sure you checked it in? I checked, but I couldn't find it. (http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=include/config s;h=fe894c3b95e3d154264c2f8731b668c410131f01;hb=HEAD)

It's in u-boot-imx tree.

...

Yes, it can go both ways.

For the SoC I understand. But he PHYs on the Freescale don't, as far as I know. Anyway, the Denx module probably uses more advanced PHYs.

Different one, I dunno if it's more advanced or not.

...

The PHY doesn't supply clock on mx28evk, CPU does.

I'm glad we agree here.

...

Yea ...

M28EVK: PHY supplies clock to CPU MX28EVK: CPU supplies clock to PHY

It's getting rather obvious, now you've given me a bit of insight in the differences between both boards. Thanks.

You're welcome

...

Still, the support is already there.

I figured that too; I expected you probably made that first before moving on to the Denx module.

Fabio did (Cced), after DENX module was supported.

Please always Cc the mailing list etc.

But I couldn't find it. At first I thought m28evk_config would support it (too). The similarity in names suggests similarity in boards. But after patching too much code, I figured to implement mx28evk_config and board/freescale/mx28evk myself. What a waste of time.... At least it was a good exercise before our product boards arrive next week.

I just pulled my git repository and Make can't find a rule to make mx28evk_config, so it's really not there. Not even hidden in another configuration.

Wasn't it removed, since the Freescale implementation in 2009.08 broke?

No, see above.

M

Robert.