[U-Boot] [PATCH-OMAP3] OMAP3: Clean up coding style of board config files
Clean up coding style of board config files.
Signed-off-by: Dirk Behme dirk.behme@gmail.com
--- include/configs/omap3_beagle.h | 204 ++++++++++++++++++++++------------------- include/configs/omap3_evm.h | 184 +++++++++++++++++++----------------- include/configs/omap3_overo.h | 189 +++++++++++++++++++++---------------- 3 files changed, 316 insertions(+), 261 deletions(-)
Index: u-boot-arm/include/configs/omap3_beagle.h =================================================================== --- u-boot-arm.orig/include/configs/omap3_beagle.h +++ u-boot-arm/include/configs/omap3_beagle.h @@ -37,29 +37,30 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ -#define CONFIG_DOS_PARTITION 1
-#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h>
/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1)
-#undef CONFIG_USE_IRQ /* no support for IRQs */ +#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1
/* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */
/* * Hardware drivers @@ -68,28 +69,29 @@ /* * NS16550 Configuration */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} -#define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 #define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION 1
/* commands to include */
@@ -114,32 +116,36 @@ #define CONFIG_CMD_RUN /* run command in env variable */
#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1
/* - * Board NAND Info. + * Board NAND Info. */ #define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address to access nand at CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define SECTORSIZE 512
#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 #define CONFIG_SYS_NAND_WP
#define CONFIG_JFFS2_NAND @@ -147,47 +153,57 @@ #define CONFIG_JFFS2_DEV "nand0" /* start of jffs2 partition */ #define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */
/* Environment information */ -#define CONFIG_BOOTDELAY 10 - -#define CONFIG_BOOTCOMMAND "nand read 80200000 280000 400000 ; bootm 80200000" +#define CONFIG_BOOTDELAY 10
-#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 noinitrd root=/dev/mtdblock4 rw rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND "nand read 80200000 280000 400000 ; " \ + "bootm 80200000"
-#define CONFIG_NETMASK 255.255.254.0 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2," \ + "115200n8 noinitrd " \ + "root=/dev/mtdblock4 " \ + "rw rootfstype=jffs2" + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE 1 /* * Miscellaneous configurable options */ -#define V_PROMPT "OMAP3 beagleboard.org # " +#define V_PROMPT "OMAP3 beagleboard.org # "
#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT V_PROMPT -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000) /* 31MB */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ + /* works on */ +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ + /* load address */
/* * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ -#define V_PVT 7 +#define V_PVT 7
-#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ -#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
/*----------------------------------------------------------------------- * Stack sizes @@ -218,48 +234,52 @@ /* **** PISMO SUPPORT *** */
/* Configure the PISMO */ -#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M -#define PISMO1_NOR_SIZE GPMC_SIZE_64M +#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M +#define PISMO1_NOR_SIZE GPMC_SIZE_64M
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define DBG_MPDB_SIZE GPMC_SIZE_16M -#define PISMO2_SIZE 0 - -#define CONFIG_SYS_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define DBG_MPDB_SIZE GPMC_SIZE_16M +#define PISMO2_SIZE 0 + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */
-#define PHYS_FLASH_SIZE_SDPV2 SZ_128M -#define PHYS_FLASH_SIZE SZ_32M +#define PHYS_FLASH_SIZE_SDPV2 SZ_128M +#define PHYS_FLASH_SIZE SZ_32M
#define CONFIG_SYS_FLASH_BASE boot_flash_base -#define PHYS_FLASH_SECT_SIZE boot_flash_sec +#define PHYS_FLASH_SECT_SIZE boot_flash_sec /* Dummy declaration of flash banks to get compilation right */ #define CONFIG_SYS_FLASH_BANKS_LIST {0, 0}
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at start of flash */ -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_ENV_IS_IN_NAND 1 -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
/*----------------------------------------------------------------------- * CFI FLASH driver setup */ /* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) #define CONFIG_SYS_JFFS2_MEM_NAND -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS /* use flash_info[2] */ +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS #define CONFIG_SYS_JFFS2_NUM_BANKS 1
#define ENV_IS_VARIABLE 1 @@ -275,9 +295,9 @@ extern unsigned int boot_flash_type;
#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, (nand_cs_base + OFFS(GPMC_NAND_CMD))) + writel(d, (nand_cs_base + OFFS(GPMC_NAND_CMD))) #define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, (nand_cs_base + OFFS(GPMC_NAND_ADR))) + writel(d, (nand_cs_base + OFFS(GPMC_NAND_ADR))) #define WRITE_NAND(d, adr) writew(d, (nand_cs_base + OFFS(GPMC_NAND_DAT))) #define READ_NAND(adr) readl((nand_cs_base + OFFS(GPMC_NAND_DAT)))
@@ -288,4 +308,4 @@ extern unsigned int boot_flash_type; #define NAND_ENABLE_CE(nand) #define NAND_WAIT_READY(nand) udelay(10)
-#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ Index: u-boot-arm/include/configs/omap3_evm.h =================================================================== --- u-boot-arm.orig/include/configs/omap3_evm.h +++ u-boot-arm/include/configs/omap3_evm.h @@ -1,12 +1,11 @@ /* * (C) Copyright 2006-2008 * Texas Instruments. - * Author : - * Manikandan Pillai mani.pillai@ti.com + * Manikandan Pillai mani.pillai@ti.com * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff r-woodruff2@ti.com - * Syed Mohammed Khasim khasim@ti.com + * Richard Woodruff r-woodruff2@ti.com + * Syed Mohammed Khasim khasim@ti.com * * Manikandan Pillai mani.pillai@ti.com * @@ -43,7 +42,6 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ #define CONFIG_OMAP3_EVM 1 /* working with EVM */ -#define CONFIG_DOS_PARTITION 1
#include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> @@ -52,7 +50,7 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1)
-#undef CONFIG_USE_IRQ /* no support for IRQs */ +#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -63,9 +61,11 @@ /* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */
/* * Hardware drivers @@ -74,7 +74,7 @@ /* * NS16550 Configuration */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL @@ -84,18 +84,19 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} -#define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 #define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION 1
/* commands to include */
@@ -103,7 +104,7 @@ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */
-#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_ONENAND /* ONENAND support */
@@ -118,36 +119,40 @@ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ #define CONFIG_CMD_MISC /* misc functions like sleep etc*/ #define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1
/* - * Board NAND Info. + * Board NAND Info. */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address to access nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access */ + /* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ + /* NAND devices */ +#define SECTORSIZE 512
#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 #define CONFIG_SYS_NAND_WP
#define CONFIG_JFFS2_NAND @@ -160,11 +165,11 @@ /* Environment information */ #define CONFIG_BOOTDELAY 10
-#define CONFIG_BOOTCOMMAND "onenand read 80200000 280000 400000 ; \ - bootm 80200000" +#define CONFIG_BOOTCOMMAND "onenand read 80200000 280000 400000 ; " \ + "bootm 80200000"
-#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 noinitrd \ - root=/dev/mtdblock4 rw rootfstype=jffs2" +#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 noinitrd " \ + "root=/dev/mtdblock4 rw rootfstype=jffs2"
#define CONFIG_NETMASK 255.255.254.0 #define CONFIG_BOOTFILE "uImage" @@ -178,22 +183,28 @@ #define CONFIG_SYS_PROMPT V_PROMPT #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000) /* 31MB */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */ + /* in Hz */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */
/* * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ -#define V_PVT 7 +#define V_PVT 7
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ @@ -228,51 +239,55 @@ /* **** PISMO SUPPORT *** */
/* Configure the PISMO */ -#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M -#define PISMO1_NOR_SIZE GPMC_SIZE_64M +#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M +#define PISMO1_NOR_SIZE GPMC_SIZE_64M
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define DBG_MPDB_SIZE GPMC_SIZE_16M -#define PISMO2_SIZE 0 - -#define CONFIG_SYS_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define DBG_MPDB_SIZE GPMC_SIZE_16M +#define PISMO2_SIZE 0 + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ + /* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */
-#define PHYS_FLASH_SIZE_SDPV2 SZ_128M -#define PHYS_FLASH_SIZE SZ_32M +#define PHYS_FLASH_SIZE_SDPV2 SZ_128M +#define PHYS_FLASH_SIZE SZ_32M
#define CONFIG_SYS_FLASH_BASE boot_flash_base -#define PHYS_FLASH_SECT_SIZE boot_flash_sec +#define PHYS_FLASH_SECT_SIZE boot_flash_sec /* Dummy declaration of flash banks to get compilation right */ #define CONFIG_SYS_FLASH_BANKS_LIST {0, 0}
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at start of flash */ -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_ONENAND 1 +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR boot_flash_env_addr +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR boot_flash_env_addr
/*----------------------------------------------------------------------- * CFI FLASH driver setup */ /* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) #define CONFIG_SYS_JFFS2_MEM_NAND -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS /* use flash_info[2] */ +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS #define CONFIG_SYS_JFFS2_NUM_BANKS 1
-#define ENV_IS_VARIABLE 1 +#define ENV_IS_VARIABLE 1
#ifndef __ASSEMBLY__ extern unsigned int *nand_cs_base; @@ -285,9 +300,9 @@ extern unsigned int boot_flash_type;
#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, (nand_cs_base + OFFS(GPMC_NAND_CMD))) + writel(d, (nand_cs_base + OFFS(GPMC_NAND_CMD))) #define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, (nand_cs_base + OFFS(GPMC_NAND_ADR))) + writel(d, (nand_cs_base + OFFS(GPMC_NAND_ADR))) #define WRITE_NAND(d, adr) writel(d, (nand_cs_base + OFFS(GPMC_NAND_DAT))) #define READ_NAND(adr) readl((nand_cs_base + OFFS(GPMC_NAND_DAT)))
@@ -300,25 +315,24 @@ extern unsigned int boot_flash_type;
/*---------------------------------------------------------------------------- - * SMSC9115 Ethernet from SMSC9118 family - * ---------------------------------------------------------------------------- + * SMSC9115 Ethernet from SMSC9118 family + *---------------------------------------------------------------------------- */ #if defined(CONFIG_CMD_NET)
#define CONFIG_DRIVER_SMC911X #define CONFIG_DRIVER_SMC911X_32_BIT -#define CONFIG_DRIVER_SMC911X_BASE (0x2C000000) +#define CONFIG_DRIVER_SMC911X_BASE 0x2C000000
-#endif /* (CONFIG_CMD_NET) */ +#endif /* (CONFIG_CMD_NET) */
/* - * BOOTP fields + * BOOTP fields */
- #define CONFIG_BOOTP_SUBNETMASK 0x00000001 #define CONFIG_BOOTP_GATEWAY 0x00000002 #define CONFIG_BOOTP_HOSTNAME 0x00000004 #define CONFIG_BOOTP_BOOTPATH 0x00000010
-#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ Index: u-boot-arm/include/configs/omap3_overo.h =================================================================== --- u-boot-arm.orig/include/configs/omap3_overo.h +++ u-boot-arm/include/configs/omap3_overo.h @@ -34,23 +34,25 @@ #include <asm/arch/omap3.h>
/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1)
#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1
/* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */
/* * Hardware drivers @@ -59,28 +61,29 @@ /* * NS16550 Configuration */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} -#define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 #define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION 1
/* commands to include */
@@ -109,28 +112,32 @@ #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_SYS_I2C_BUS 0 #define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1
/* - * Board NAND Info. + * Board NAND Info. */ #define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address to access nand at CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand */ + /* at CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define SECTORSIZE 512
#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 #define CONFIG_SYS_NAND_WP
#define CONFIG_JFFS2_NAND @@ -138,47 +145,57 @@ #define CONFIG_JFFS2_DEV "nand0" /* start of jffs2 partition */ #define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */
/* Environment information */ -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_BOOTCOMMAND "mmcinit; fatload mmc 0 82000000 uImage; bootm 82000000" +#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootdelay=1" +#define CONFIG_BOOTCOMMAND "mmcinit; fatload mmc 0 82000000 uImage; "\ + "bootm 82000000"
-#define CONFIG_NETMASK 255.255.254.0 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 " \ + "root=/dev/mmcblk0p2 rw rootfstype=ext3 " \ + "rootwait" + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE 1 /* * Miscellaneous configurable options */ -#define V_PROMPT "Overo # " +#define V_PROMPT "Overo # "
#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT V_PROMPT -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000) /* 31MB */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */ + /* in Hz */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */
/* * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ -#define V_PVT 7 +#define V_PVT 7
-#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ -#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT)) +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
/*----------------------------------------------------------------------- * Stack sizes @@ -209,51 +226,55 @@ /* **** PISMO SUPPORT *** */
/* Configure the PISMO */ -#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M -#define PISMO1_NOR_SIZE GPMC_SIZE_64M +#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M +#define PISMO1_NOR_SIZE GPMC_SIZE_64M
-#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M -#define DBG_MPDB_SIZE GPMC_SIZE_16M -#define PISMO2_SIZE 0 - -#define CONFIG_SYS_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define DBG_MPDB_SIZE GPMC_SIZE_16M +#define PISMO2_SIZE 0 + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */
-#define PHYS_FLASH_SIZE_SDPV2 SZ_128M -#define PHYS_FLASH_SIZE SZ_32M +#define PHYS_FLASH_SIZE_SDPV2 SZ_128M +#define PHYS_FLASH_SIZE SZ_32M
#define CONFIG_SYS_FLASH_BASE boot_flash_base -#define PHYS_FLASH_SECT_SIZE boot_flash_sec +#define PHYS_FLASH_SECT_SIZE boot_flash_sec /* Dummy declaration of flash banks to get compilation right */ #define CONFIG_SYS_FLASH_BANKS_LIST {0, 0}
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at start of flash */ -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_ENV_IS_IN_NAND 1 -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
/*----------------------------------------------------------------------- * CFI FLASH driver setup */ /* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) #define CONFIG_SYS_JFFS2_MEM_NAND -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS /* use flash_info[2] */ +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS #define CONFIG_SYS_JFFS2_NUM_BANKS 1
-#define ENV_IS_VARIABLE 1 +#define ENV_IS_VARIABLE 1
#ifndef __ASSEMBLY__ extern unsigned int *nand_cs_base;
On 17:52 Tue 11 Nov , dirk.behme@googlemail.com wrote:
Clean up coding style of board config files.
Signed-off-by: Dirk Behme dirk.behme@gmail.com
include/configs/omap3_beagle.h | 204 ++++++++++++++++++++++------------------- include/configs/omap3_evm.h | 184 +++++++++++++++++++----------------- include/configs/omap3_overo.h | 189 +++++++++++++++++++++---------------- 3 files changed, 316 insertions(+), 261 deletions(-)
apply to u-boot-arm/omap3
participants (2)
-
dirk.behmeï¼ googlemail.com -
Jean-Christophe PLAGNIOL-VILLARD